Post-source decay fragmentation analyses of linkage isomers of Lewis-type oligosaccharides in curved-field reflectron matrix-assisted laser desorption/ionization time-of-flight mass spectrometry: combined in-source decay/post-source decay experiments and relative ion abundance analysis

Linkage isomers of Lewis(X) trisaccharide (Le(X)) and Lewis(a) trisaccharide (Le(a)) were distinguished by the post-source decay (PSD) fragment spectra obtained by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) without permethylation. Both Y- and Z-type fragmentations were observed at the C-3 position of N-acetylhexosamine. beta-Elimination at C-3 of the reducing-end N-acetylglucosamine in Le(X) formed a double bond, which conjugated to an N-acetyl group, making the chemical species stable. In contrast, the double bond formed in the reducing end glucose of 3-fucosyllactose was unstable owing to the lack of a conjugated system. Therefore, beta-elimination of N-acetylglucosamine occurred predominantly rather than that of hexose in MALDI-PSD fragmentation. The measurements of the PSD fragment mass spectra using pseudo precursor ions originating from in-source decay were useful for the analyses of the fragmentation mechanisms and for the assignments of the chemical species of the fragment ions. The combined in-source decay/post-source decay experiments revealed the formation of a double bond between C-2 and C-3 in N-acetylglucosamine of Le(X). Abundance analysis of the PSD ions indicated that the 1-3 glycosyl linkage cleaves more easily than does the 1-4 linkage in MALDI-PSD fragmentation. Ion abundance analyses were useful in estimating the degree of Y- and Z-type fragmentation at the C-3 position of hexose and N-acetylhexosamine. The analysis of the relative ion abundances was a powerful tool for the assignments of the chemical species of the PSD ions.     

Structural analysis of phosphatidylcholines by post-source decay matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The utility of post-source decay (PSD) matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was investigated for the structural analysis of phosphatidylcholine (PC). PC did not produce detectable negative molecular ion from MALDI, but positive ions were observed as both [PC+H](+) and [PC+Na](+). The PSD spectra of the protonated PC species contained only one fragment corresponding to the head group (m/z 184), while the sodiated precursors produced many fragment ions, including those derived from the loss of fatty acids. The loss of fatty acid from the C-1 position (sn-1) of the glycerol backbone was favored over the loss of fatty acid from the C-2 position (sn-2). Ions emanating from the fragmentation of the head group (phosphocholine) included [PC+Na-59](+), [PC+Na-183](+) and [PC+Na-205](+), which corresponded to the loss of trimethylamine (TMA), non-sodiated choline phosphate and sodiated choline phosphate, respectively. Other fragments reflecting the structure of the head group were observed at m/z 183, 146 and 86. The difference in the fragmentation patterns for the PSD of [PC+Na](+) compared to [PC+H](+) is attributed to difference in the binding of Na(+) and H(+). While the proton binds to a negatively charged oxygen of the phosphate group, the sodium ion can be associated with several regions of the PC molecule. Hence, in the sodiated PC, intermolecular interaction of the negatively charged oxygen of the phosphate group, along with sodium association at multiple sites, can lead to a complex and characteristic ion fragmentation pattern. The preferential loss of sn-1 fatty acid group could be explained by the formation of an energetically favorable six-member ring intermediate, as apposed to the five-member ring intermediate formed prior to the loss of sn-2 fatty acid group.     

Structure analysis of branched oligosaccharides using post-source decay in matrix-assisted laser desorption ionization mass spectrometry

Post-source decay matrix-assisted laser desorption ionization (PSD-MALDI) of sodium ion-attached branched oligosaccharides derived from glycoproteins was demonstrated as a method of structure analysis by reflectron time-of-flight (TOF) mass spectrometry. Mono-, di- and triantennary structures were investigated. The fragmentation patterns of these (structurally related) substances as obtained in the positive-ion mode showed characteristic differences correlated with branching sites and linkage positions. Two-bond ring cleavages as known from fast atom bombardment/collision-induced dissociation and IR laser desorption mass spectrometry were also observed. Internal fragment ions formed by up to four consecutive cleavages were obtained with high intensity, allowing the branching structure of complex carbohydrates to be identified. PSD-MALDI of oligosaccharides is characterized by high sensitivity, very good signal-to-noise ratios and high reproducibility of fragmentation patterns and signal intensities.     

Structural analysis of (methyl-esterified) oligogalacturonides using post-source decay matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The use of post-source decay matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for the structural analysis of ((partly) methyl-esterified) oligogalacturonides (oligoGalA) is described. The fragmentation behavior of purified (un)saturated oligoGalA (degree of polymerization 3-6), methyl-esterified and methyl-glycosydated oligoGalA was studied. General fragmentation patterns are described and used for the elucidation of the positions of methyl esters on partly methyl-esterified oligoGalA. This technique now permits the determination of the position of methyl esters or other substituents on pectic fragments, helping in understanding the mode of action of pectinolytic enzymes.     

Negative ion matrix-assisted laser desorption/ionization time-of-flight post-source decay calibration by using fibrinopeptide B

Fibrinopeptide B (M _r 1552.58) was employed as a calibration compound for matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) post-source decay (PSD) fragment ion analysis in the negative mode. Experiments were performed by using both continuous and delayed extraction, with the maximum reflectron voltages being 30 and 21 kV, respectively. For comparison, a common positive ion PSD calibrant, ACTH(18–39) (M _r 2466.7), was also employed with positive ion calibration constants being applied to negative ion spectra. Using fibrinopeptide B as the calibrant, the negative ion PSD results for angiotensin II (M _r 1046.2), renin substrate tetradecapeptide (horse) (M _r 1759.0), and the custom-synthesized peptide (K₂G₄)₂ (M _r 987.1) showed a factor of 1.5–2 improvement in absolute mass accuracy. Typical absolute mass-to-charge ratio accuracies were within ±1 Thomson and were achieved even when the peptide being analyzed was more massive than fibrinopeptide B. In addition, both calibrants showed increased accuracy when experiments were conducted in the delayed extraction mode. Other advantages of using fibrinopeptide B are its moderate cost and the ability to perform calibration and sample analysis for negative ion PSD under the same instrumental conditions.     

Influence of acceleration voltages on relative ion intensities in the post-source decay fragmentation of isomeric cyclic oligosaccharides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

The isomeric sugar-branched cyclodextrin (CD) derivatives of 6-O-glucosyl-betaCD (G1-betaCD) and 6,6-di-O-glucosyl-alphaCD (G1, G1-alphaCD) were analyzed by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry at the different acceleration voltages of 20 and 8 kV. In the post-source decay (PSD) fragment spectra of G1-betaCD and G1, G1-alphaCD under the reduced acceleration voltage 8 kV, the relative intensity ratios of one-site cleavage ions [M - G1](+) to two-site cleavage ions [M - G2 approximately 5](+) were much larger than at 20 kV. This change in the intensity ratio in the spectra of G1, G1-alphaCD was much larger than in the spectra of G1-betaCD. The measurements under the reduced acceleration voltage were useful to distinguish easily between the otherwise very similar PSD fragment spectra of G1-betaCD and G1, G1-alphaCD. It was concluded that the acceleration energy is one of the most effective parameters controlling relative ion intensities in PSD, and that distinction between these oligosaccharide isomers is facilitated by manipulation of this parameter.     

Fragmentation characteristics of peptide-metal ion adducts under matrix-assisted laser desorption/ionization post-source decay time-of-flight mass spectrometric conditions

Fragmentation reactions of sodium-cationized enkephalin peptides generated by matrix-assisted laser desorption/ionization were studied using post-source decay (PSD) with a reflectron time-of-flight mass spectrometer. Several matrices and analyte-matrix sample preparation methods were evaluated for high-intensity ion currents that could last for the entire PSD analysis. A triple dried-droplet sample preparation procedure with 2,5-dihydroxybenzoic acid as the matrix was found to yield abundant longer-lasting ion signals of the peptide-Na(+) ion adducts. The principal decay product of these adduct ions is the [b(n-1) + Na + OH](+) ion, which provides an unambiguous identification of the C-terminal residue of a peptide. In some peptides, the loss of a second residue from the C-terminus is also observed. No other sequence-specific ions were observed.     

Sequencing of peptides phosphorylated on serines and threonines by post-source decay in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

In the era of complete genome sequences, biochemical and medical research will focus more on the dynamic proteome of a cell. Regulation of proteins by post-translational modifications, which are not determined by the gene sequence, are already intensively studied. One example is phosphorylation of serines and threonines, probably the single most common cellular regulatory mechanism. In this paper we describe the sequencing of mono- and bisphosphorylated peptides, including identification of the phosphorylation sites, by post-source decay (PSD) in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. In addition to dephosphorylation of the parent ions, we studied the influence of the phosphate group on the fragmentation of peptides. Generally, peptides phosphorylated on serine and threonine residues displayed no difference in their fragmentation patterns. The intensities of the resulting fragment ion signals depend only on the peptide sequence and not on either the phosphorylated amino acid or its position in the peptide chain. Phosphorylation increased the bond cleavage C-terminal to the phosphorylation site more than 10-fold, resulting in abundant signals, which typically dominated the PSD spectra. The produced C-terminally phosphorylated b-type fragment ions showed characteristic dephosphorylated fragment ions b(n) -H(3)PO(4) (-98 Da) and b(n) -HPO(3) (-80 Da) of higher abundances than the phosphorylated fragment ion. As a second layer to identify the phosphorylation site, all internally phosphorylated fragment ions were accompanied by minor, but always detectable, signals of the dephosphorylated fragment ions. Interpretation of PSD spectra of phosphopeptides was not more complicated than for unphosphorylated peptides, despite the increased number of obtained fragment ion signals.     

Product ion studies of diastereomeric benzo[ghi]fluoranthene tetraols by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and post-source decay

The product ion formation characteristics of the four diastereomeric tetrahydroxy benzo[ghi]fluoranthene compounds formed by hydrolysis of the syn and anti diastereomers of trans-3,4-dihydroxy-5,5a-epoxy-3,4,5,5a-tetrahydrobenzo[ghi]fluoranthene are studied using matrix-assisted laser desorption/ionization and post-source decay (PSD) to determine a correlation between the fragmentation characteristics of these tetraols and the structures of the diol-epoxide diastereomers from which they are hydrolyzed. The tetraols formed by the trans ring opening of the diol epoxides during hydrolysis yield product ion spectra specific for the syn and anti configurations of their precursor diol epoxides. All four diastereomeric tetraols form product ions by the losses of one and/or two water molecules in varying proportions when lithium-cationized molecule ions (m/z 301) are selected for PSD product ion analysis. The differences in the PSD spectra of these four Li+-cationized molecules are rationalized in terms of a water loss mechanism that involves the 1,2 elimination of a hydrogen atom and hydroxyl group that are cis with respect to each other on adjacent carbons.     

Atmospheric pressure matrix-assisted laser desorption/ionization with analysis by ion mobility time-of-flight mass spectrometry

The use of an atmospheric pressure matrix-assisted laser desorption/ionization (AP-MALDI) source was employed with an atmospheric pressure ion mobility spectrometer (APIMS) and an orthogonal acceleration reflector time-of-flight mass spectrometer (TOFMS) to analyze dipeptide and biogenic amine mixtures from a liquid glycerol 2,5-dihydroxybenzoic acid (DHB) matrix. Improved sensitivities were obtained by the addition of a localized electrical (corona) discharge in conjunction with the AP-MALDI source. Enhanced sample ionization efficiency created by this combination provided an overall elevation in signal intensity of approximately 1.3 orders in magnitude. Combinations of three dipeptides (Gly-Lys, Ala-Lys, and Val-Lys) and nine biogenic amines (dopamine, serotonin, B-phenylethylamine, tyramine, octopamine, histamine, tryptamine, spermidine, and spermine) were resolved in less than 18 ms. In many cases, reduced mobility constants (K(o)) were determined for these analytes for the first time. Ion mobility drift times, flight times, arbitrary signal intensities, and collision-induced dissociation (CID) fragmentation product signatures are reported for each of the samples.     

Post-source decay in the analysis of polystyrene by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Various secondary series are observed in matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectra of polystyrene. The number and positions of the series depend on the choice of matrix and added cation. For a given treatment, series observed in linear mode are not necessarily observed in reflectron mode, and vice versa. Post-source decay analysis was used to determine that the secondary series arise at least in part from formation and decay of adducts of polystyrene with matrix species. There is some treatment-to-treatment variation, but adduct formation and decay were observed for all tested treatments. The multiplicity of secondary series makes it unclear whether post-source decay occurs for the main series (polystyrene + cation)⁺ ions under the conditions normally used for polystyrene analysis. Such ions do undergo post-source decay at laser fluences greater than normally used. Although only polystyrene was investigated in this work, other polymers may also produce adduct and decay series in MALDI analysis. Their presence can mask the presence of minor components in a sample, but at least as observed here, do not have a strong influence on molecular mass determinations.     

Sodium-tolerant matrix for matrix-assisted laser desorption/ionization mass spectrometry and post-source decay of oligonucleotides

A mixture of 2',4',6'-trihydroxyacetophenone in acetonitrile and aqueous triammonium citrate solution in a 1:1 molar proportion (0.2 M concentration) was found to be a good matrix for the detection of synthetic oligodeoxynucleotide samples. A high proportion of volatile solvent as well as the high salt content ensure fast co-crystallization of the matrix, co-matrix and analyte molecules. Matrix-assisted laser desorption/ionization (MALDI) mass spectra obtained in negative ion reflectron mode from samples prepared with this protocol show deprotonated molecules [M - H](-), rather than sodium adducts, as the most abundant ions even when up to 50 mM of sodium chloride is present in the sample. The matrix is shown to be effective for low mass modified single nucleotides as well as for longer oligodeoxynucleotides (up to 18mer). Post-source decay (PSD) mass spectra can also be obtained by increasing the laser fluence. Simple sequence information such as the identity and localization of a deleted base or the 5'/3' orientation can then easily be obtained. The calibration method and mass accuracy required are discussed depending on the type of information required.     

Disulfide bond decay during matrix-assisted laser desorption/ionization time-of-flight mass spectrometry experiments

In our laboratory, we have been studying the reductive processes that occur during matrix-assisted laser desorption/ionization (MALDI) experiments. Recently, we have finished an analysis of the DHB matrix effect on the azo group in cyclic peptides. However, deep understanding of disulfide bond behaviour during a mass spectrometry (MS) experiment is much more important in proteomics as its reduction can cause serious errors in protein spectra interpretation. Therefore, we have focused on intra- and intermolecular disulfide bonds as well as disulfide bonds connecting cysteine and 2-thio-5-nitrobenzoic acid (TNB, Ellman's reagent modification) in model peptides during MALDI MS measurements. While the reduction was not observed for intra- and intermolecular cysteine-cysteine disulfide bonds, the disulfide connection between cysteine and TNB was always affected. It was proved that TNB and Ellman's reagent can act as a matrix itself. The results obtained enabled us to propose a reaction mechanism model which is able to describe the phenomena observed during the desorption/ionization process of disulfide-containing molecules.     

Differentiating structural isomers of sialylated glycans by matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectrometry

Using model acidic glycans, we demonstrate the benefits of permethylation for matrix-assisted laser desorption/ionization time-of-flight/time-of-flight (MALDI/TOF-TOF) tandem mass spectrometry. With both the linear and branched structures, extensive cross-ring fragmentation product ions were generated, yielding valuable information on sugar linkages. Elimination of the negative charges commonly associated with sialylated structures through permethylation allowed their structural analysis in the positive ion mode. Extensive A- and X-type ions were observed for the linear structures, and slightly weaker signals for the branched sialylated structures. The diagnostic cross-ring fragments, permitting a distinction between alpha2-3 and alpha2-6 linkages of the sialic acid residues, were seen in abundance. Importantly, the cross-ring fragmentation with the branched structures provides adequate information to assign sialic acid residues, with a specific linkage, to a particular antenna.     

Charge derivatization by 4-sulfophenyl isothiocyanate enhances peptide sequencing by post-source decay matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

High-sensitivity, rapid identification of proteins in proteomic studies normally uses a combination of one- or two-dimensional electrophoresis together with mass spectrometry. The simplicity and sensitivity of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) have increased its application in recent years. The most common method of 'peptide fingerprinting' often may not provide robust identification. Normally additional sequence information by post-source decay (PSD) MALDI-TOFMS provides additional constraints for database searches to achieve highly confident results. Here we describe a derivatization procedure to facilitate the acquisition of such sequence information. Peptide digests from a skin-expressed protein were modified with 4-sulfophenyl isothiocyanate. The resulting peptides carry a fixed negative charge at the N-terminal end and the resulting PSD spectrum is dominated by C-terminal y-type ions. The sequence information in most cases can be obtained manually or with simple programming tools. Methods of optimizing the procedure and increasing the sensitivity are discussed.     

Fragmentation and sequencing of cyclic peptides by matrix-assisted laser desorption/ionization post-source decay mass spectrometry.

A series of synthetic cyclic decapeptides and other smaller cyclic peptides were analyzed using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. The investigated compounds were cyclized in a head-to-tail manner and contained non-proteinaceous amino acids, such as D-phenylalanine, D,L-4-carboxyphenylalanine, epsilon-aminocaproic acid, and gamma-aminobutyric acid, and were synthesized in a program to develop inhibitors of pp60(c-src) (Src), a tyrosine kinase that is involved in signal transduction and growth regulation. Post-source decay (PSD) spectra of the cyclic peptides featured abundant sequence ions. Two preferential ring opening reactions were detected resulting in linear fragment ions with an N-terminus of proline and a C-terminus of glutamic acid, respectively. MALDI-PSD spectra even permitted de novo sequencing of some cyclic peptides. Systematic studies on cyclic peptides using this method of fragmentation have not been reported to date. This work presents an easy mass spectrometric method, MALDI-PSD, for the characterization and identification of cyclic peptides.     

Identification of isoenzymes using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The identification of isoforms is one of the great challenges in proteomics due to the large number of identical amino acids preventing their separations by two-dimensional electrophoresis. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) has become a rapid and sensitive tool in proteomics, notably with the new instrumental improvements. In this study, we used several acquisition modes of MALDI-TOFMS to identify isoforms of porcine glutathiones S-transferase. The use of multiple proteases coupled to the different acquisition modes of MALDI-TOFMS (linear, reflectron, post-source decay (PSD) and in-source decay, positive and negative modes) allowed the identification of two sequences. Moreover, a third sequence is pointed out from a PSD study of a tryptic ion revealing the modification of the amino acid tyrosine 146 to phenylalanine.     

In-source decay characteristics of peptides in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In-source decay (ISD) of peptides, coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, has been examined to determine the influence of the matrix, the susceptibility of amino-acid residues to ISD, and the effect of extraction delay times. Out of nine di- and tri-hydroxybenzoic acids and three cinnamic derivatives tested, the most suitable matrix for ISD was 2,5-dihydroxybenzoic acid. The amine bond at Xxx-Gly and Xxx-Val residues was less susceptible than other amino-acid residues to ISD; however, the more sensitive residue(s) were not as clear. Using a peptide that gave the y(n)- and (z(n) + 2)-series product ions, it was confirmed that amide-bond cleavage (formation of the y(n)-series ions) accompanied metastable peaks, whereas metastable peaks were never observed with amine-bond cleavage [formation of the (z(n) + 2)-series ions]. Furthermore, abundant c(n)-series ions, which originate from amine-bond cleavage on the peptide backbone, were observed whenever a minimum delay time of 38 ns or continuous extraction was used to obtain spectra. These data indicate that amine-bond cleavage in ISD takes place on the ionization time scale before the energy randomization is completed.