Adsorption of potassium on a Si(111) surface

The adsorption of potassium on several sites (T₁, T₄, H₃) of a Si(111) surface is studied using the extended Hückel method and cluster models. The results show that the chemisorption energy on the T₄ site is almost equal to that on the H₃ site for an ideal surface. However, the analysis of chemical bonding of adatoms on a Si surface suggests that the chemisorption of adatoms might induce a kind of reconstruction on the Si(111) surface. Rough calculations for the adsorption on this reconstructed surface are carried out. In this paper, charge transfer, density of states and characterization of the bonds between the adatom and substrate Si atoms are also investigated in detail.     

Atomic motion induced by a scanning tunneling microscope tip on the Si(111) surface

Using scanning tunneling microscopy (STM), we have observed the STM-tip-induced atomic motion of the Si adatoms in the Si(111)−(7 × 7) surface structure near out-of-phase boundaries in the structure. In order to excite the motion of Si adatoms, the tip was fixed at a certain height at every pixel in the lateral scan and the sample bias was changed stepwise. Although the motion of Si adatoms occurs in a complicated manner, analysis shows that its elemental process is quite simple. Namely, the Si adatom jumps from an occupied T₄ site to an unoccupied T₄ site.     

Cu/CeO2(110)界面特性的第一性原理研究

Cu-CeO₂体系因其特殊的催化能力而在固体氧化物燃料电池和水煤气转化反应等多个催化领域有重要应用. 采用基于密度泛函理论的第一性原理方法, 在原子和电子层面上系统地研究了单个Cu原子及Cu小团簇在CeO₂(110)面上的吸附构型, 价键特性和电子结构, 结果表明: 1) 单个Cu原子的最稳定吸附位是两个表面O的桥位; 2) Cu团簇的稳定吸附构型为扭曲的四面体结构; 3) Cu原子及Cu团簇的吸附在CeO₂(110)面的gap区域引入了间隙态, 这些间隙态主要来自于Cu及其近邻的O和表层还原形成的Ce³⁺, 间隙态的出现表明Cu的吸附增强了CeO₂(110)表面的活性; 4) 吸附的单个Cu原子及Cu团簇分别被CeO₂(110)面表层的Ce⁴⁺离子氧化形成了Cu^δ+和Cu₄^δ+, 并伴随着Ce³⁺离子的形成, 这个反应可归结为Cu_x/Ce⁴⁺→Cu_x^δ+/Ce³⁺; 5) Cu团簇的吸附比Cu单原子的吸附引入了更多的Ce³⁺离子, 进而形成了更多的Cu^δ+-Ce³⁺催化活性中心. 结合已报道的Cu/CeO₂(111)界面特性, 更加全面地探明了Cu与CeO₂(111)和(110)两个较稳定低指数表面的协同作用特性, 较为系统地揭示了Cu增强CeO₂催化特性的原因及Cu与CeO₂协同作用的内在机理. 关键词： 2')" href="#">Cu/CeO₂ U')" href="#">DFT+U 吸附 电子结构     

Adsorption of SH and OH and coadsorption of S, O and H on Ni(111)

The adsorption of SH and OH radicals on Ni(111) is treated using an ab initio embedding theory. The Ni(111) surface is modeled as a three-layer, 28-atom cluster with the Ni atoms fixed at bulk lattice sites. The Ni(111) energy surface is very flat for SH adsorption if the H tilt angle is allowed to vary. At both atop and bridge sites, the S---H axis is tilted away from the surface normal by 70°, resulting in the sulfur atom being sp³-hybridized and the adsorption energy being 59 kcal mol⁻¹. For SH at the three-fold site, the S---H axis is normal to the surface, the sulfur is sp-hybridized, and the adsorption energy is 58 kcal mol⁻¹. OH is preferentially adsorbed at the three-fold site. The calculated adsorption energy is 90 kcal mol⁻¹ and the O---H axis is perpendicular to the surface. OH adsorption at the atop and bridge sites is 16 and 5 kcal mol⁻¹ less stable than at the three-fold site, respectively. Atomic H, O and S are preferentially adsorbed at the three-fold site. The calculated adsorption energies are 62, 92 and 87 kcal mol⁻¹, for H, O and S, respectively. The calculated adsorbate---Ni bond distances of 1.86 Å for H, 1.86 Å for O and 2.29 Å for S are in good agreement with experimental data. SH and OH bonding to the surface involves a combination of ionic and covalent contributions and substantial mixing with the Ni 3d orbitals. Dipole-moment calculations indicate strong ionic bonding for the atomic O/Ni system and ionic plus covalent character for the atomic S/Ni interactions. Adsorption of S and O at the three-fold site blocks H adsorption at the nearby surface. Moving H away from the S or O adatom reduces the repulsion. The dissociation of SH_ad → S_ad + H_ad is calculated to be exothermic by 5 kcal mol⁻¹ and OH_ad → O_ad + H_ad to be endothermic by 30 kcal mol⁻¹ for infinite separation between S, O and H.     

MoO_3/Si界面区钼掺杂非晶氧化硅层形成的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法,通过模拟MoO_3/Si界面反应,研究了MoO_x薄膜沉积中原子、分子的吸附、扩散和成核过程,从原子尺度阐明了缓冲层钼掺杂非晶氧化硅(a-SiO_x(Mo))物质的形成和机理.结果表明,在1500 K温度下, MoO_3/Si界面区由Mo, O, Si三种原子混合,可形成新的稳定的物相.热蒸发沉积初始时, MoO_3中的两个O原子和Si成键更加稳定,同时伴随着电子从Si到O的转移,钝化了硅表面的悬挂键. MoO_3中氧空位的形成能小于SiO_2中氧空位的形成能,使得O原子容易从MoO_3中迁移至Si衬底一侧,从而形成氧化硅层;替位缺陷中, Si替位MoO_3中的Mo的形成能远远大于Mo替位SiO_2中的Si的形成能,使得Mo容易掺杂进入氧化硅中.因此,在晶硅(100)面上沉积MoO_3薄膜时, MoO_3中的O原子先与Si成键,形成氧化硅层,随后部分Mo原子替位氧化硅中的Si原子,最终形成含有钼掺杂的非晶氧化硅层.     

Theoretical study of interaction between atoms of Au, Ag, Cu and clean Si(1 1 1) surface

To evaluate the interactions between the atoms of Au, Ag and Cu and clean Si(1 1 1) surface, two types of silicon clusters Si₄H₇ and Si₁₆H₂₀ together with their metal complexes were studied by using hybrid (U)B3LYP density functional theory method. Optimized geometries and energies on different adsorption sites indicate that: (1) the binding energies at different adsorption sites are large (ranging from 1.2 to 2.6 eV depend on the metal atoms and adsorption sites), suggesting a strong interaction between metal atom and silicon surface; (2) the most favorable adsorption site is the on top (T) site. Mulliken population analysis indicated that in the system of on top (T) site, a covalent bond is formed between metal atom and dangling bond of surface Si atom.     

测量电子自旋——晶格弛豫时间T1的技术问题

本文讨论应用连续波方法测量电子自旋——晶格弛豫时间T₁的实验技术问题。分析液氮翻滚使T₁测量结果很不一致的原因,提出用吹冷气冷冻样品方法,可以解决液氮翻滚对测量T₁所产生的影响.用改进的方法测量ZnS:Mn、Cu粉末样品的T₁,获得重复性较好的实验结果。     

Calculation of normal frequencies of adsorbed molecules by the LCGTO-MCP-LSD method

Density functional calculations have been performed to determine the equilibrium geometry and normal frequencies of the Pd₃(CCH₃) cluster (ethylidyne on Pd₃). We find promising agreement between the theoretically obtained frequencies and those of experimental studies for CCH₃ on the Pd(111) surface. The effect of the metal cluster relaxation on the calculated equilibrium geometry and normal frequencies is examined.     

A density-functional theory investigation on disorption of O2 on Sn(111) and its comparison with initial oxidation on the X(111) (X=Si,Ge, Sn,Pb) surfaces

The first-principles calculations are performed to investigate the adsorption of O₂ molecules on an Sn(111) 2×2 surface. The chemisorbed adsorption precursor states for O₂ are identified to be along the parallel and vertical channels, and the surface reconstructions of Sn(111) induced by oxygen adsorption are studied. Based on this, the adsorption behaviours of O₂ on X(111) (X=Si, Ge, Sn, Pb) surfaces are analysed, and the most stable adsorption channels of O₂ on X(111) (X=Si, Ge, Sn, Pb) are identified. The surface reconstructions and electron distributions along the most stable adsorption channels are discussed and compared. The results show that the O₂ adsorption ability declines gradually and the amount of charge transferred decreases with the enhancement of metallicity.     

氟哌酸1HNMR的测定及过渡金属离子对其影响

氟哌酸^*[即1-乙基-6-氟-4-氧-7-(1-哌嗪)-3-(1,4-二氢化喹啉甲酸]是一种广谱、安全、有效、可供口服的抗感染药。我们测定了它的¹H自旋-晶格弛豫时间T₁及其在Cr³⁺、Mn²⁺、和Fe³⁺等过渡金属离子存在下的T₁值。实验结果表明,在加入过渡金属离子前后,氟哌酸不同位¹H的T₁值发生了一定的变化。据此可揭示过渡金属离子和氟哌酸形成配合物的配位点,从而可确定所形成配合物的结构。     

Initial Processes of Sulfur Adsorption on Si（100） Surface

The adsorption of one monolayer S atoms on ideal Si（100） surface is studied by using the self-consistent tight binding linear muffon-tin orbital method. Energies of adsorption systems ors atoms on different sites are calculated. It is found that the adsorbed S atoms are more favorable on B1 site （bridge site） with a distance 0.131 nm above the Si surface. The .S, Si mixed layer might exist at S/Si（100） interface. The layer projected density of states are calculated and compared with that of the clean surface. The charge transfers are also investigated.     

Interaction of atomic oxygen (N2O) with a clean Si(001) surface: O adsorption geometries as derived from the O KVV Auger lineshape

The room temperature adsorption of N₂O on the clean Si(001)2 × 1 surface was used as a model system in an Auger electron spectroscopy (AES) study presented in this paper. Earlier experimental and recent theoretical work have provided evidence that this reaction evolves in discernible stages each exhibiting different adsorption geometries for the oxygen atom. In this AES study the intensity ratio of the KL₁L₁ and KL_2,3L_2,3 O Auger transitions, , was measured as a function of the fractional oxygen coverage, θ, and compared with our calculated intensity ratios and binding energy measurements of the O 1s photoelectron from literature. As a result we have found, for the first time, that (θ) can be related to a specific adsorption geometry in the submonolayer range. Moreover, we have found experimental evidence for an intermediate stable O adsorption state on the dimer at low coverage (θ 0.2 monolayer), as proposed earlier from theoretical studies.     

四卤化锡混合物中受扩散控制的卤原子交换动力学研究

以¹¹⁹Sn NMR 方法研究了四氯化锡和四溴化锡混合物（1∶1, 摩尔比）交换体系在不同条件下的动力学性质. 测定了在不同浓度的氘代氯仿溶液中5个交换组份的表观纵向弛豫时间（T¹）及5个组份相互间的交换速率常数（k）,结果表明交换速率常数与表观纵向弛豫速率成正比关系;同时,根据¹¹⁹Sn 1D NMR信号的线宽估测了有效横向弛豫时间（T^*₂）,并由T₁/T^*₂推断在所研究的体系中分子的运动属NMR慢运动极限. 从实验结果可推断在所研究的复杂交换体系中5个组份间的交换与分子自扩散运动有关,即化学交换与交换主体的扩散运动有必然的联系.     

Site preference of Ti and Nb in L12-ordered Co-Al-W phase and their effect on the properties of the alloy: first-principles study

In this work,the equilibrium structure,electronic and elastic properties of L1₂-ordered Co-Al-W and Co-Al-W-X(X=Ti and Nb)phase were calculated,using first-principles calculations.Among six nonequivalent sites(Al₁,Al₂,Co₃,Co₄,W₅,W₆),Ti and Nb prefer to occupy the W₆site,since the formation enthalpy of the system is lowest when Ti and Nb occupy the W。site.Both Ti and Nb most affect the density of states of Al atoms.Compared with the Al₂ site,which is the sub-preference site of Ti and Nb,the density of states of Al atoms is higher with the addition of Ti and Nb in the W₆site,which means that the latter system is more stable.According to the bulk modulus B,shear modulus G,Young's modulus E,hardness Hv and Poisson's ratioσ,for Co₃(AI,W)alloy,the addition of Ti and Nb in the W₆site decreases its hardness hut increases its duetility.This work cnnfirms that Ti and Nh can stahilize the Cag(Al,W)alloy and have a positive effect in solving the relatively poor ductility of this alloy,which has important implications for the development of cobalt.based alloys.     

Cluster and periodic DFT calculations of adsorption and activation of CO2 on the Cu(hkl) surfaces

The adsorption behavior and thermal activation of carbon dioxide on the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces have been investigated by means of density functional theory calculations and cluster models and periodic slabs. According to the cluster models, the optimized results indicate that the basis set of C and O atoms has a distinct effect on the adsorption energy, but an indistinct one on the equilibrium geometry. For the CO₂/Cu(hkl) adsorption systems studied here, the final structure of adsorbed CO₂ is near linear and the preferred modes for the adsorption of CO₂ onto the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces are the side-on adsorption at the cross bridge site with an adsorption energy of 13.06 kJ/mol, the side-on adsorption at the short bridge site (13.54 kJ/mol), and the end-on adsorption on the on-top site with C–O bonds located along the short bridge site (26.01 kJ/mol), respectively. However, the calculated adsorption energies from periodic slabs are lower as compared to the experimental data as well as the cluster model data, indicating that the periodic slab approach of generalized gradient approximation in the density function theory may be not suitable to obtain quantitative information on the interaction of CO₂ with Cu(hkl) surfaces.     

H,Cl和F原子钝化Cu_2ZnSnS_4(112)表面态的第一性原理计算

采用基于密度泛函理论的第一性原理计算方法系统研究了Cu_2ZnSnS_4体相的晶格结构、能带、态密度及表面重构与H,Cl和F原子在Cu_2ZnSnS_4(112)表面上的吸附和钝化机理.计算结果表明:表面重构出现在以金属原子Cu-Zn-Sn终止的Cu_2ZnSnS_4(112)表面上,并且表面重构使表面发生自钝化;当单个H,Cl或F原子吸附在S原子终止的Cu_2ZnSnS_4(112)表面上时,相比于桥位(bridge)、六方密排(hcp)位和面心立方(fcc)位点,三种原子均在特定的顶位(top)吸附位点表现出最佳稳定性.当覆盖度为0.5 ML时,无论H,Cl还是F原子占据Cu_2ZnSnS_4(112)表面的2个顶位均具有最低的吸附能.以S原子终止的Cu_2ZnSnS_4(112)表面在费米能级附近的电子态主要由价带顶部Cu-3d轨道和S-3p轨道电子贡献,此即表面态.当H,Cl或F原子在表面的覆盖度达0.5 ML时,费米能级附近的表面态降低,其中H原子钝化表面态的效果最佳,Cl原子的效果次之,F原子的效果最差.表面态降低的主要原因在于吸附原子从S原子获得电子致使表面Cu原子和S原子在费米能级处的态密度峰几乎完全消失.     

基于改进非线性拟合的核磁共振T2谱多指数反演

核磁共振T₂谱多指数反演算法是开展复杂体系样品核磁共振(NMR)弛豫研究最重要的数学工具. 常用的T₂谱多指数反演算法一般都是事先给出弛豫时间T₂分布的布点, 然后转化为线性拟合问题进行求解. 在求解的T₂谱较为分散的时候, 反演得到的T₂谱精确度不高, 分辨率较低. 非线性拟合是解决这个问题的有效办法. 本文针对分散T₂谱反演利用非线性拟合时遇到的初值依赖及运算复杂问题, 利用线性回归最小二乘方法, 改进了其中的带非负约束非线性优化模型, 将搜索的反演参数从T₂, f 减少为T₂, 加快了收敛速度, 减少了对初值的依赖, 提高了反演精度, 使算法更加稳健. 通过用改进的Levenberg-Marquardt算法和差分进化算法进行计算机模拟反演及实验数据反演, 验证了改进方法在核磁共振T₂ 谱反演中的有效性.     

The energetics of NH3 adsorption at the MgO(001) surface

Ab initio quantum-mechanical calculations based on density-functional theory and the pseudopotential method have been used to study the adsorption of the NH₃ molecule at the MgO(001) surface. The calculations employ slab geometry and periodic boundary conditions, with the occupied orbitals expanded in plane waves. The reliability of the theoretical methods has been verified by calculations on the bare surface and the isolated molecule. Four different adsorption geometries have been studied, and in each case the equilibrium configuration has been determined by full relaxation of the system. The two most stable configurations have about the same adsorption energy, and this energy agrees well with the results of recent thermal desorption measurements. Intermolecular repulsion is found to be a dominant effect at monolayer coverage, but becomes small at coverages below 25%. It is shown that chemical effects are not significant, and that the adsorption mechanism is predominantly physisorption.     

吸附在活性炭、三氧化二铝和硅胶上分子的核弛豫研究

本文提出核与电子偶极相互作用和自旋扩散两种作用在被吸附到固体多电子表面上的分子弛豫起着重要作用,给出了自旋晶格弛豫时间(T_1e)和相关时间(τ_c)的关系:T_1e,-kτ_c/1+ω₀²τ_c²)^1/2,式中k对给定固体是常数。吸附在硅胶上甲苯的弛豫数据可用此式描述。得到了甲苯中甲基在不同温度下的τ_c。,它们在374K到240K间的相关时间在3.56×10^-9 s到5.76×10^-8 s范围。由此计算出其活化能为15.0kJ/mol。     

小白鼠肌肉组织的NMR质子自旋交换分析

本文在Zimmerman-Brittin两相质子交换核磁共振弛豫模型基础上,分析了NMR弛豫实验中检测信号与各相表现和本征弛豫多数的关系,编写了自动化处理实验数据的计算机程序,这一技术可用于复相系统中不同成分的NMR表现和本征弛豫特性研究中,本文中的样品是选用健康新鲜的小白鼠肌肉,没加任何处理,用h-h,s-h,s-s脉冲序列,反转恢复法(π-τ-π/2)在强场下(0.92T)做T₁、T₂测定实验,分析结果表明本征弛豫参数T₁=1050ms,T₂=4500μs的成分是由肌肉中的"自由水"引起的,其质子相对含量为69%;本征弛豫参数T₁=530ms,T₂=26μs的成分是由肌肉中的"束附水"引起的,其质子相对含量为9%,本征弛豫多数T₁=530ms,T₂=1250μs的成分是由肌肉中的各种大分子和有机物引起的,其质子相对含量为9%,本征弛豫参数T₁=470ms,T₂=1250μs的成分由样品中的脂肪引起的,其质子相对含量为13%,在肌肉组织中的质子与水中质子之间有强烈的交换作用,其交换率k=1000s^-1.在脂肪中的质子与其它成分之间没有交换作用。