Copper(I) and mercury(II) halide complexes of 1,2-bis(diphenylthioylphosphino)hydrazine

The reaction of 1,2-bis(diphenylthioylphosphino)hydrazine (L) with copper(I) and mercury(II) halides affords the complexes, [{CuLX}₂] (X = I, Br or Cl), [HgLX₂] (X = Cl or Br) and the tetrametallic complex, [{L(HgI₂)₂}₂]. Single crystal X-ray structures have been performed on the uncoordinated ligand, L, as well as the complexes [{CuLX}₂] (X = I, Br and Cl), [HgLBr₂] and [{L(HgI₂)₂}₂. The molecules of L exist as dimers as a result of pairs of N–HS hydrogen bonds. The copper(I) complexes are centrosymmetric dimetallic species, the two copper atoms being bridged by L and the X atoms. In all cases the coordination sphere around the Cu atoms is approximately trigonal pyramidal with an ‘S₂X₂’ donor set. The complex, [HgLBr₂], is a distorted tetrahedral monomer with an ‘S₂Br₂’ donor set and L acting as a bidentate thus forming a seven-membered chelate ring. The tetramercury iodo complex, [{L(HgI₂)₂}₂], contains two ‘L(HgI₂)₂’ units linked centrosymmetrically via an I atom from each moiety. The geometry around the Hg atoms is distorted tetrahedral. The influence of hydrogen bonding between the hydrazine backbone hydrogens of L and the coordinated halide ions in for the structures of the metal complexes is discussed.     

Multiple ligand transfer reaction between [CpRu(L)(AN)2][PF6] (L=AN, CO, P(OMe)3; AN=acetonitrile) and CpFe(CO)L′X (L′=CO, PMe3, PMe2Ph, PMePh2, PPh3, P(OPh)3; X=Cl, Br, I)

Treatment of ruthenium complexes [CpRu(AN)₃][PF₆] (1a) (AN=acetonitrile) with iron complexes CpFe(CO)₂X (2a–2c) (X=Cl, Br, I) and CpFe(CO)L′X (6a–6g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Cl, Br, I) in refluxing CH₂Cl₂ for 3 h results in a triple ligand transfer reaction from iron to ruthenium to give stable ruthenium complexes CpRu(CO)₂X (3a–3c) (X=Cl, Br, I) and CpRu(CO)L′X (7a–7g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Br, I), respectively. Similar reaction of [CpRu(L)(AN)₂][PF₆] (1b: L=CO, 1c: P(OMe)₃) causes double ligand transfer to yield complexes 3a–3c and 7a–7h. Halide on iron, CO on iron or ruthenium, and two acetonitrile ligands on ruthenium are essential for the present ligand transfer reaction. The dinuclear ruthenium complex 11a [CpRu(CO)(μ-I)]₂ was isolated from the reaction of 1a with 6a at 0°C. Complex 11a slowly decomposes in CH₂Cl₂ at room temperature to give 3a, and transforms into 7a by the reaction with PMe₃.     

Structural, spectral and antimicrobial studies of copper(II) complexes of 2-benzoylpyridine N(4)-cyclohexyl thiosemicarbazone

Six new copper(II) complexes of 2-benzoylpyridine N(4)-cyclohexyl thiosemicarbazone (HL) have been synthesized and characterized by different physicochemical techniques like molar conductivity measurements, magnetic studies and electronic, infrared and EPR spectral studies. Five of the complexes have been found to possess the stoichiometry [CuLX], where X = Cl (1), Br (2), NO₃ (3), NCS (4), N₃ (5). The complex prepared from copper sulfate has the composition [Cu₂L₂SO₄] · (H₂O)₂ (6). In all the complexes the deprotonated ligand, L and the anion were found to be coordinated to the Cu(II) ion. The terdentate nature of the ligand is evident from the IR spectra. The metal ligand bonding parameters evaluated from the EPR spectra indicate strong in-plane σ and in-plane π bonding. The magnetic and spectroscopic data indicate a square planar geometry for complexes 1, 3, 4 and 5, while the complexes 2 and 6 are assigned a square pyramidal geometry. Crystal structure of the complex [CuLCl] reveals two molecules per asymmetric unit of a monoclinic lattice, with space group symmetry P2₁/n. The complexes [ CuLBr ₂] (2) and [CuLNCS] (4) crystallized into triclinic lattices with space group . Compound 2 exists as a thiolate bridged copper(II) dimer. The antimicrobial activity of the ligand and the copper complexes were tested against five types of bacteria isolated from clinical samples. The complexes were found to be active against Bacillus sp., Vibrio cholera O1, Staphylococcus aurus and Salmonella paratyphi.     

The reactions of some protected and unprotected monosaccharides with M(NO){HB(3,5-Me2C3HN2)3}X2 (M = Mo, X = Cl, Br, I; M = W, X = Cl)

The reactions between [M(NO){HB(3,5-Me₂C₃HN₂)₃}X₂] (M = Mo, X = Cl, Br, I; M = W, X = Cl) and the monosaccharides 2,3:4,5-di-O-iso-propylidene-β- -fructopyranose, 2,3:5,6-di-O-isopropylidene-- -mannofuranose, methyl-- -glucopyranoside and -(+)-mannofuranose have been investigated and the complexes [M(NO){HB(3,5- Me₂C₃HN₂)₃}X(OR)] (M = Mo, X = Cl, Br, I; M = W, X = Cl; ROH = 2,3:4,5-di-O- isopropylidene-β- -fructopyranose) have been isolated as mixtures of diastereoisomers.     

Synthesis, structure and reactions of seven-coordinate, phosphine-supported, halide-activated carbonyl- and alkyne-complexes of niobium(I)

The complexes (Hal)Nb(CO)₃(PR₃)₃ (PR₃ = PEt₃, Hal = I; PR₃ = PMe₂Ph, Hal = Cl, Br, I) and (Hal)Nb(CO)_4/2(dppe)_1/2 (Hal = Br, I) have been prepared by oxidative halogenation of carbonylniobate with pyridinium halides (Hal = Cl, Br) or iodine (Hal = I). In the tricarbonyls, one CO and one PR₃ are labile and can be displaced by a four-electron donating alkyne to give all-trans-[(Hal)Nb(CO)₂(RCCR′)(PR₃)₂] (PR₃ = PMe₂Ph; Hal = Cl, Br, I: R, R′ = H, Et, Ph; R = H, R′ = Ph. PR₃ = PEt₃, Hal = I: R, R′ = Pr; R = H, R′ = Bu, Ph; R = Me, R′ = Et). In the case of acetylene, INb(CO)(HCCH)₂(PEt₃)₂ is also formed. PR₃ can be displaced by P(OMe) ₃. In the tetracarbonyls, two CO ligands are replaced by two isonitriles to form INb(CO)₂(CNR)₂dppe (R = ^tBu, Cy), or by one alkyne to form (Hal)Nb(CO)₂(PhCCPh)dppe (Hal = Br, I). In these complexes, the remaining CO ligands occupy cis positions. The structure of BrNb(CO)₂(dppe)₂·THF, INb(CO)₂(dppe)₂·hexane and INb(CO)₂(PEt₃)₂(MeCCEt) have been determined by a single crystal X-ray diffraction study. The alkyne complexes are best regarded as octahedral with the centre of the alkyne ligand occupying the positions trans to the halide and the CC axis aligned with the OC---Nb---CO axis. The complexes (Hal)Nb(CO)₂(dppe)₂ adopt a trigonal prismatic structure with the halide capping the tetragonal face spanned by the four phosphorus functions. The crystal structure of a by-product, Br₂Nb(CO)(H₂CPhPCH₂CH₂PPh₂)₂·1/2THF has also been determined. The geometry is pentagonal bipyramidal, with one of the bromine atoms and the CO on the axis. Some ⁹³ Nb NMR data for the Nb^I complexes are presented, and preliminary observations on the reactions between the π-alkyne complexes and H₂ or H⁻ are reported.     

Dimeric and polymeric copper(I) complexes. Synthesis and characterization of copper(I) complexes of di-2-pyridyl ketone oxime (DPKox) and crystal structures of [Cu(DPKox)Cl]2·2H2O and [Cu(DPKox)(NCS)]n

Copper(I) complexes with di-2-pyridylketone oxime (DPKox) of the type CuLX·nH₂O, n=1 for X=Cl and Br, and n=0 for X=I and SCN, have been synthesized and characterized. The overall physical results suggest tridentate and bidentate DPKox ligand in the Cl, Br and I, SCN complexes, respectively, and terminal X in the former but bridging X in the later. These complexes display MLCT bands in the visible region, but they do not fluoresce at room temperature. The structure determination has shown the chloride complex (1) to have a centro-symmetrically related dimeric unit, in which each copper atom is coordinated by Cl(1), N(1), N(2) and N(3) (of the second ligand molecule) in a distorted tetrahedral environment. Hydrogen bonds are formed by the O(1) of the oxime group and a lattice water molecule, and between different lattice water molecules and Cl(1). The structure of the thiocyanate complex (2) features tetrahedral geometry around copper atoms, a chelating bidentate DPKox ligand coordinating via one of the two pyridyl nitrogens, N(1), and N(oxime) only and μ-1,3-thiocyanate group forming zigzag chains along the c-axis of the unit cell.     

Copper(I) coordination compounds with two bidentate chelating pyrazole ligands. X-ray crystal structures of DI-μ-chloro-bis[[N,N-bis(1- pyrazolylmethyl)aminoethane]copper(I)] and [bis(N,N-bis(1-pyrazolylmethyl)aminoethane]copper(I) triflate

The pyrazole derivatives of aminoethane N,N-bis(3,5-dimethyl-1-pyrazolyl- methyl)aminoethane (aebd) and N,N-bis(1-pyrazolylmethyl)aminoethane (aebp) form co- ordination compounds with copper(I) of stoichiometry [Cu(L)X], with X = Cl, Br, I and SCN, and [Cu(L)₂X], with X = CF₃SO₃ and BF₄. The ligands chelate in a bidentate manner, with only the pyrazole groups coordinating. The crystal structures of two representative examples have been determined: [Cu(aebp)Cl]₂ is triclinic, space group P , with a = 8.711(2), b = 9.351(1) and c = 9.528(1) Å, = 68.57(1)°, β = 61.47(1)° and γ = 77.82(1)°, and Z = 2. Standard least-squares refinement gave R = 0.029 (R_w = 0.038) for 1804 reflections. [Cu(aebp)₂]CF₃SO₃ is monoclinic, space group P2₁/n, with a = 13.352(5), b = 14.663(3) and c = 15.752(4) Å, β = 117.49(3)°, and Z = 4. Standard least-squares refinement gave R = 0.029 (R_w = 0.032) for 1786 reflections. In both cases the copper environment is slightly-distorted tetrahedral. The chloride compound is dimeric with one ligand molecule (Cu---N distances of 2.011(2) and 2.047(2) Å) and two bridging chlorides per copper (Cu---Cl distances of 2.3874(8) and 2.4094(8) Å). With the non- coordinating triflate anion, a monomeric compound with two ligand molecules per copper was obtained (Cu---N distances of 2.018(4), 2.028(4), 2.049(4) and 2.050(4) Å).     

Synthesis and characterization of rhenium-copper sulfide cluster complexes [(Ph3P)2N][Re3(CuX)(mu3-S)4Cl6(PMe2Ph)3] (X = Cl, Br, I)

The reaction of a trinuclear rhenium sulfide cluster compound Re3S7Cl7 with dimethylphenylphosphine and CuX2 (X = Cl or Br) or CuX (X = Cl, Br, or I) formed tetranuclear cluster complexes [(Ph3P)2N][Re3(CuX)(mu3-S)4Cl6(PMe2Ph)3] (X = Cl, Br, or I). Their solutions have the characteristic intense blue color with visible spectral bands near 600 nm. Single-crystal X-ray structures show that three mu-S atoms in the intermediate trinuclear rhenium complex coordinate to a copper atom, forming elongated tetrahedral structures in which Re-Cu bonding interaction is negligible (Re-Cu distances are 3.50 to approximately 3.54 A as compared with Re-Re distances ranging from 2.69 to 2.81 A).     

Vibrational spectroscopic studies of metal(II) halide benzimidazole

Infrared spectra (4000–200 cm⁻¹) are reported for metal halide(II) benzimidazole complexes of the following stoichiometries: M(benz)X₂ [M=Cd, Cu; X=Cl, Br; BENZ=benzimidazole], Co(benz)₂, and Co(benz)₂X₂ [X=Cl, Br, I]. Vibrational assignments are given for all the observed bands. The analysis of the vibrational spectra indicates that there are some structure–spectra correlations. For a given series of isomorphous complexes the sum of the difference between the values of the vibrational modes of uncoordinated benzimidazole and coordinated to metal ion benzimidazole was found to increase in the order of the second ionization potentials of metals.     

Infrared spectral, variable-temperature magnetic susceptibility and Mössbauer spectral investigations on tris(carbodithioato) iron(III) complexes

Two types of iron(III) carbodithioate complexes, (i) normal complexes, Fe(R₂NCS₂)₃ with R₂N = 4-methyl-, 4-phenyl-, or 2-methyl-piperazyl, piperidyl and thiomorpholyl and (ii) zwitterionic complexes, Fe(R₂NCS₂H)₃X₃ with R₂N = 4-methyl- or 4-phenyl-piperazyl and X = Cl or Br have been synthesized. The complexes have been characterized by elemental analyses, IR spectral studies, variable-temperature magnetic susceptibility and in three cases by variable-temperature Mössbauer spectral studies. All the complexes exhibit the ²T₂ (low spin, S = ) ⁶ A₁ (high spin, S = ) spin equilibrium process. The zwitterionic carbodithioate ligands have a weaker ligand field strength than their normal ligand analogues.     

Structures and luminescence properties of two copper(I) halide complexes featuring 2-(2-benzimidazolyl)-6-methylpyridine

Two new copper（I） halide complexes bearing 2-（2-benzimidazolyl）-6-methylpyridine（Hbmp） and PPh₃ ligands, Cu（Hbmp）（PPh₃）X（X = Br（1）;I（2））,have been synthesized and characterized.Single-crystal X-ray structure analysis reveals that the halide ligand has a significant impact on the Cu-N_pyridyl bond lengths.Complexes 1 and 2 show the solid-state emissions at ambient temperature,varying with the halide bound to the {Cu（Hbmp）（PPh₃）} motif,which are perhaps best attributed to the metal-to-ligand charge-transfer（Cu（I）→Hbmp） transition mixed with some ligand-to-ligand charge-transfer（X and PPh₃→Hbmp） character.     

Copper(I) complexes withN-methylbenzothiazole-2-thione and -2-selone

Summary N-methylbenzothiazole-2-thione (bttme) and -2-selone (btseme) form complexes with CuX₂ (X=Cl, Br, NO₃, 1/2SO₄ or BF₄). The reaction, carried out in MeOH, produces complexes of copper(I), whose stoichiometry mainly depends on the ligand. Infrared evidence shows that the coordination occurs through the exo-sulphur and selenium atoms.     

Gold(I) and silver(I) complexes containing a tripodal tetraphosphine ligand: influence of the halogen and stoichiometry on the properties. The X-ray crystal structure of two gold(I) dimeric aggregates

Complexes of the type [Au2(micro-PP3)2]X2 [X=Cl (), Br (), I ()], [Ag2(micro-PP3)2](NO3)2 (), Ag(PP3)Cl (), M3(micro-PP3)X3 [M=Au, X=Cl (), Br (), I (); M=Ag, X=NO3 ()] and Au4(micro-PP3)X4 [X=Cl (), Br (), I ()] have been prepared by interaction between gold(I) or silver(I) salts and the ligand tris[2-(diphenylphosphino)ethyl]phosphine (PP3) in the appropriate molar ratio. Microanalysis, mass spectrometry, IR and NMR spectroscopies and conductivity measurements were used for characterization. and are ionic dinuclear species containing four-coordinate gold(i) and four/three coordinate silver(i), respectively. Solutions of behave as mixtures of complexes in a 2:1 [Au2(micro-PP3)X2; X=Cl(), Br(), I()] and 4:1 () metal to ligand ratio. and react with free PP(3) in solution to generate the ionic compounds and , respectively. Complexes and , with four linear PAuX fragments per molecule, were shown by X-ray diffraction to consist of dimeric aggregates via close intermolecular gold(I)gold(I) contacts of 3.270 A () and 3.184 A (). The resultant octanuclear systems have an inversion center with two symmetry-related gold(I) atoms being totally out of the aurophilic area and represent a new form of aggregation compared to that found in other halo complexes of gold(I) containing polyphosphines. The luminescence properties of the ligand and complexes, in the solid state, have been studied. Most of the gold systems display intense luminescent emission at room and low temperature. The influence of the halogen on the aurophilic contacts of compounds with a 4:1 metal to ligand ratio results in different photophysical properties, while and are luminescent complex is nonemissive. The luminescence increases with increasing the phosphine/metal ratio affording for complexes , without aurophilic contacts, the stronger emissions. Silver complexes and are nonemissive at room temperature and show weaker emissions than gold(I) species at 77 K.     

Thermochemical studies on copper(II) and nickel(II) complexes of the Schiff base derived from 2-(2-aminophenyl)benzimidazole and salicylaldehyde

Microcalorimetric measurements were made on copper(II) and nickel(II) complexes of the Schiff base (L) derived from 2-(2-aminophenyl)benzimidazole and salicylaldehyde. The complexes were of the general type MX₂L₂ with M = Cu or Ni, and X = Cl, Br, NO₃ or ClO₄. The enthalpies of decomposition of the solid complexes to solid products, MX₂ and L, were derived. Despite showing some variation depending on the anion, the average binding enthalpy of the ligand to nickel was 47.5 ± 7.3 kJ mol⁻¹, greater than that to copper, 16.8 ± 3.5 kJ mol⁻¹ by 30.7 ± 8.1 kJ mol⁻¹.     

Reactivity studies of [Pd2(μ-X)2(PBu3)2] (X = Br, I) with CNR (R = 2,6-dimethylphenyl), H2 and alkynes

Improved syntheses for the dimeric compounds [Pd₂(μ-X)₂(PBu^t₃)₂] (X = Br, I) have been developed and the X-ray crystal structure for the dimer with X = 1 is reported. The reactions of these dimers with CNR (R = 2,6-dimethylphenyl), H₂ and a series of terminal and substituted alkynes are also reported. The dimer with X = Br is an initiator for the catalytic polymerisation of phenylacetylene. The product of the dimers with disubstituted alkynes results in the synthesis of trimeric species with formula [Pd₃(μ-X){ν²-C₄(CO₂R)₄}₂][PBu^t₃)Me]₂ (X = Br, I; R = Me, Et). The X-ray crystal structure of one of these compounds (when R = Et and X = I) is presented, demonstrating that the palladium dimers assist the C---C coupling of the alkynes.     

The reactivity of cationic [trioxo-(1,4,7-triazacyclononane) rhenium(VII)] and oxorhenium(V) complexes containing triazamacrocycles

The reduction of colourless [LRe^VIIO₃]Br in an acetone-water mixture (6: 1) with zinc amalgam affords green, air-sensitive [LRe^VO₂Br] which forms a violet complex [LReO(μ-O)₂ReOBr₂]in aqueous solution (L = 1,4,7-triazacyclononane; C₆H₁₅N₃). From a similar reduction of [LReO₃]ReO₄ the violet neutral complex [LReO(μ-O)₂ReO(ReO₄)₂] was obtained. [LReO₃]⁺ is deprotonated in alkaline solution (pK_a = 10.3 + 0.2, 25°C) and [(C₆H₁₄N₃)ReO₃] was isolated as a yellow solid. The latter amido rhenium(VII) compound reacted in dimethylformamide with R---X (R = CH₃, benzyl; X = Cl), affording at the cyclic amine, N,N′,N″-trisalkylated complexes of the type [L′ReO₃]X. The monomeric rhenium(V) complexes [LReOX₂]X (X = Cl, Br, I) were obtained from the reaction of [n-Butyl₄N]ReOX₄ and L in acetonitrile. IR, UV-vis, ¹⁷O NMR spectra of these compounds are reported.     

Formation of (η-R5C5)Ru(NO)X2 by the nitrosylation of (η-R5C5)Ru(CO)2X under irradiation

The ruthenium(II) complexes (η-R₅C₅)Ru(CO)₂X with R = H, CH₃ and X = Cl, Br, I undergo a facile reaction with nitric oxide under UV irradiation to afford ruthenium(IV) nitrosyl derivatives of the general type (η-R₅C₅)Ru(NO)X₂.     

Synthesis and characterisation of nickel(II) complexes with tripodal ligand tris[4-(3-(5-methylpyrazolyl)-3-aza-3-butenyl] amine (MPz3tren): X-ray crystal structure of [Ni(MPz3tren)](BF4)2·0.5H2O

Nickel(II) complexes of the tripodal ligand (MPz₃tren) of the general formula [Ni(MPz₃tren)]X₂·nH₂O (X=Cl, Br, NO₃, ClO₄ and BF₄; n=0 for Cl and Br; n=0.5 for NO₃, ClO₄ and BF₄) have been prepared by template methodology and characterised by elemental analyses, magnetic susceptibility and conductivity measurements at RT, IR and electronic spectra. The molar conductivities measured in MeOH for all the complexes show them to be 1:2 electrolytes. The hexadentate character of the ligand in all the complexes is inferred from IR spectral studies. The electronic spectra in solid state and in MeOH solution suggest octahedral geometry for all the complexes. The structure of [Ni(MPz₃tren)](BF₄)₂·0.5H₂O has been determined by single-crystal X-ray diffraction studies (monoclinic, c2/c). Nickel(II) is in a trigonal antiprismatic N₆ donor environment and the crystal structure is stabilised by a network of strong H-bonding.     

Übergangsmetall-carbin-komplexe : LXXXIII. Neue anionische mer-dihalogeno-tricarbonyl-dialkylamino-carbin-komplexe des wolframs

The reaction of trans-X(CO)₄WCNR₂ (X = Br, R = ^c hex (cyclohexyl); X = Cl, R = ^c hex, ⁱpr (isopropyl) with M⁺X⁻ (M⁺ = NEt₄⁺, X⁻ = Br⁻; M⁺ = PPN⁺, X⁻ = Cl⁻) leads under substitution of one CO ligand to new anionic dihalo(tricarbonyl)carbyne-tungsten complexes of the type M⁺ mer-[(X)₂(CO)₃WCNR₂]⁻ (M⁺ = NEt₄⁺, X = Br, R = ^c hex; M⁺ = PPN⁺, X = Cl, R = ^c hex, ⁱ pr), whose composition and structure were determined by elemental analysis as well as by IR, ¹H and ¹³C NMR spectroscopy. In the anionic carbyne complexes the entered halogen ligand, coordinated in a cis position relative to the carbyne ligand on the metal, can be easily substituted by neutral nucleophiles, as the reaction of PPN⁺ mer-[(Cl)₂(CO)₃WCN^chex₂]⁻ with PPh₃ demonstrates yielding the neutral carbyne complex mer-[Cl(CO)₃(PPh₃)WCN^chex₂].     

Komplexkatalyse : XXII. Elektronenstoss-induzierter zerfall der dimeren η-allylnickel(II)-halogenide (C3H5NiX)2 (X = Cl, Br, I)

The EI-mass spectra of the dimeric η³-allylnickel(II) halides (C₃H₅NiX)₂ (X = Cl, Br, I) were recorded. Besides the successive splitting-off of the C₃H₅ groups and the elimination of C₃H₅X, the formation of NiX₂ leading to (C₃H₅)₂Ni is the predominating fragmentation path. Cleavage of the dimeric structure is observed only in the case where X = I.