Abstract A hybrid nanocomposite based on ethylene propylene diene monomer/carboxylated styrene-butadiene rubber (EPDM/XSBR) blend with different concentrations (0–7 phr) of multiwall carbon nanotube (MWCNT) was prepared on a two-roll mill. The role of grafted maleic anhydride (EPDM-g-MA) as compatibilizer and the effect of different concentrations of MWCNT on mechanical properties, morphology, rheological and curing characteristics of nanocomposites were investigated. The curing behavior of the prepared nanocomposites was studied using a rheometer. Also, the microstructure of nanocomposites was observed using TEM. By increasing the MWCNT concentration in the compatible blends, the curing time and scorch time of the blends decreased, while the maximum and minimum torque increased. Failure surface morphology studies showed that the existence of EPDM-g-MAH compatibilizer improved the distribution of MWCNT within the polymer matrix and uniform distribution of MWCNT with a small amount of aggregation was obtained. On the other hand, the presence of MWCNT in the matrix led to a sharper surface of the fracture. Also, mechanical properties such as modulus, tensile strength, hardness, fatigue, resilience and elongation-at-break for compatible EPDM/XSBR nanocomposite showed better results than those for incompatible composite. 相似文献
A thermoplastic elastomer (TPE) of ethylene propylene diene terpolymer (EPDM) and nylon with excellent mechanical properties was prepared by dynamic vulcanization. The effects of the curing systems, compatibilizer, nylon content and reprocessing on the mechanical properties of EPDM/nylon TPEs were investigated in detail. Experimental results indicate that maleic anhydride (MAH) grafted EPR has a better performance in compatibilizing the EPDM/nylon blends compared with other compatibilizers containing acid group. Tensile strength and elongation at break go through a maximum value at a compatibilizer resin content (on total rubber dosage) of 20%. EPDM/nylon TPE using sulfur as curative has higher tensile strength and elongation than that of TPE using phenolic resin or peroxide as curatives. Tensile strength and elongation at break increase with increasing nylon content. Scanning electron microscopy results show that rubber particles distributed at an average size of 1 μm in dynamic vulcanized EPDM/MAH-g-EPR/nylon TPE. 相似文献
The study deals with the morphological and thermal analysis of binary rubber blends of acrylonitrile-co-butadiene rubber (NBR)
with another polymer. Either ethylene propylene diene terpolymer (EPDM), ethylene vinyl acetate (EVA), chlorosulphonated polyethylene
(CSM), or polyvinyl chloride (PVC) has been selected for the second phase. Depending on the relative polarity and interaction
parameter of the components, the binary blends showed development of a bi-phasic morphology through scanning electron microscopy
(SEM). Use of different types of thermal analysis techniques revealed that these blends are generally incompatible excepting
one of NBR and PVC. Derivative differential scanning calorimetry (DDSC), in place of conventional DSC, has been used to characterize
the compatibility behavior of the blends. NBR–PVC shows appearance of only one glass transition temperature (Tg) averaging the individual Tg’s of the blend components. The partially missible blend of NBR and CSM shows a broadening of Tg interval between the phase components, while the immiscible blends of either NBR–EPDM or NBR–EVA do not show any change in
Tg values corresponding to the individual rubbers of their blend. The experimental Tg values were also compared with those calculated theoretically by Fox equation and observed to match closely with each other.
Studies have also been made to evaluate the thermal stability of these blends by thermo-gravimetric analysis (TG) and evaluation
of activation energy of respective decomposition processes by Flynn and Wall method. Thermo-mechanical analysis (TMA) was
found to be effective for comparison of creep recovery and dimensional stability of the blends both at sub-ambient as well
as at elevated temperatures. 相似文献
Blends of poly(2,6-dimethyl-1,4-phenylene oxide)/nylon 6 alloys based on ethylene-propylene-diene elastomer (EPDM) grafted with maleic anhydride (MA) (EPDM-g-MA), EPDM grafted with glycidyl methacrylate (EPDM-g-GMA), and styrene-ethylene-butadiene-styrene block copolymer grafted with MA (SEBS-g-MA) were prepared via melt extruction, and morphology, mechanical properties, and rheology were studied. The compatibilizing effects of functionalized elastomers on the PPO/nylon 6 alloys were proved by DSC analysis and confirmed by the significant improvement in the notched Izod impact strength. Toughening was resulted from the smaller particle size and finer dispersion of EPDM in the PPO/nylon 6 matrix as well as a novel network structure of SEBS-g-MA domain in matrix. The notched Izod impact strength of the blends exhibited an optimum value when the extent of MA or GMA graft ratio of EPDM varied, which was an order of magnitude higher than the non-toughened alloys. The morphology revealed that the size of EPDM particles decreased with an increase in graft ratio of MA or GMA onto EPDM. Rheology investigation indicated that the MA or GMA moieties on EPDM reacted with the amine groups of nylon 6, which increased the molecular weight and the degree of branching, and thus resulted in an increase in the viscosity of the blends. This proved the reactive compatibilization between functionalized EPDM and PPO/nylon 6 matrix. 相似文献
A novel graft copolymer of vinyltriethoxysilane onto ethylene propylene diene terpolymer has been developed by grafting varying contents of VTES using dicumyl peroxide as an initiator in a twin-screw extruder. Grafting of VTES and EPDM has been ascertained using FTIR. The EPDM-g-VTES developed has been blended with different weight percentage of linear low density polyethylene [LLDPE] by melt mixing. Thermal, thermal ageing and morphological behaviour of the blends are studied with respect to the effect of blend composition, static vulcanization and dynamic vulcanization with varying quantities of VTES and LLDPE. The incorporation of silane moiety onto EPDM raises the inception and final decomposition temperature. The stability EPDM-g-VTES/LLDPE blend increases with increase in concentration of EPDM-g-VTES due to thermally stable Si-O-Si linkage. It was ascertain from SEM micrograph that EPDM-g-VTES/LLDPE blends lead to formation of interpenetrating crosslinked network during hot water treatment and by treatment with DCP, respectively. The linear, statically vulcanized, dynamically vulcanized and filled blends of EPDM-g-VTES/LLDPE have been characterized to assess the suitability of the blends for high performance applications. In addition, it is also observed that the incorporation of fillers improves thermal stability of the blends. 相似文献
Polymeric methylene diphenyl diisocyanate (PMDI) was added as chain extender to a blend of recycled poly(ethylene terephthalate) (R-PET) and linear low density polyethylene (LLDPE) with compatibilizer of maleic anhydride-grafted poly(styrene-ethylene/butadiene-styrene) (SEBS-g-MA). Hydroxyl end groups of PET can react with both isocyanate groups of PMDI and maleic anhydride groups of SEBS-g-MA, which are competing reactions during reactive extrusion. The compatibility and properties of the blends with various contents of PMDI were systemically evaluated and investigated. WAXD results and SEM observations indicated that chain extension inhibits the reaction between PET and SEBS-g-MA. As the PMDI content increased, the morphology of dispersed phase changed from droplet dispersion to rodlike shape and then to an irregular structure. The DSC results showed that the crystallinity of PET decreased in the presence of PMDI, and the glass transition temperature (Tg) of PET increased with addition of 0-0.7 w% PMDI. The impact strength of the blend with 1.1 w% PMDI increased by 120% with respect to the blend without PMDI, accompanied by only an 8% tensile strength decrease. It was demonstrated that the chain extension of PET with PMDI in R-PET/LLDPE/SEBS-g-MA blends not only decreased the compatibilization effect of SEBS-g-MA but also hindered the crystallization of PET. 相似文献
Chlorinated nitrile rubber (Cl-NBR) has been blended with chlorinated ethylene propylene diene rubber (Cl-EPDM) in different ratios by a conventional mill mixing method. The effect of the blend ratio on processing characteristics, mechanical properties (such as tensile and tear strength, elongation at break, hardness, abrasion resistance, heat build-up and resilience), structure, morphology, glass transition temperature (Tg), thermal stability, flame retardancy, oil resistance, AC conductivity, dielectric properties and transport behavior of petrol, diesel and kerosene were investigated. The shift in absorption bands of blends studied from FTIR spectra, single Tg from DSC analysis and decrease in amorphous nature from XRD showed the molecular miscibility in Cl-NBR/Cl-EPDM blends. SEM images showed the uniform mixing of both Cl-NBR and Cl-EPDM in a 50/50 blend ratio. The TGA curves indicated the better thermal stability of the polymer blend. The elongation at break, heat build-up, resilience and hardness of the polymer blend decreases with an increase in Cl-NBR content in the blend whereas the flame and oil resistance were increased with increase in Cl-NBR content. Among the polymer blends, the maximum torque, tensile strength, tear and abrasion resistance was obtained for the 50/50 blend ratio because of the effective interfacial interactions between the blend components. AC conductivity and dielectric properties of polymer blend increased with increase in the ratio of Cl-NBR in the blend. Different transport properties such as diffusion, permeation and sorption coefficient were measured with respect to nature of solvent and different blend ratios. Temperature dependence of diffusion was used to estimate the activation parameters and the mechanism of transport found to be anomalous. 相似文献
Polylactic acid (PLA) was toughened by 5–20 wt % of natural rubber (NR). Two different compatibilizers maleated PLA (PLA-g-MA) and maleated NR (NR-g-MA) were used as coupling agent. The blends were prepared using twin screw extruder at varying levels of NR. Mechanical, thermal and morphological analyses were carried out to study the effect of compatibilizer on PLA/NR blends compatibility. 相似文献
Summary: The present communication reports the first use of electron tomography in reconstructing the three‐dimensional morphology in thermoplastic elastomer blends. The blends investigated were dynamically vulcanized blends of ethylene‐propylene‐diene (EPDM) rubber/poly(propylene)/oil and polystyrene‐block‐(ethylene‐co‐butylene)‐block‐polystyrene (SEBS)/poly(propylene)/oil. An easy identification of blend morphology could be carried out at blend compositions, where conventional transmission electron microscopic imaging gives misleading information. This technique gives a higher resolution than any other microscopic technique, and is applicable to blends with dispersed as well as co‐continuous morphologies.
Example of a tomographic model of partially co‐continuous SEBS phases in a SEBS/PP/oil thermoplastic blend. Only the contours of the SEBS phase are shown. 相似文献
Graft copolymer and graft terpolymer were prepared by solution grafting of maleic anhydride (MAH) or acrylonitrile (AN) alone and mixture of MAH and AN on to ethylene–propylene–diene terpolymer (EPDM) using benzoyl peroxide (BPO) as an initiator. The resulting EPDM-g-MAH, EPDM-g-AN and EPDM-g-(MAH-co-AN) have been used to obtain a binary blend of Nylon 6/functionalized EPDM and a ternary blend of polyethylene/Nylon 6/functionalized EPDM by melt blending. The effects of the nature and the amount of the grafted species on the phase morphology, crystallization behavior and mechanical properties of the blends were characterized through scanning electron microscopy, optical microscopy, infrared spectroscopy and using a dynamic mechanical analyzer. From the morphological study, it can clearly be seen that the presence of the functionalized EPDMs in these blends resulted in an improvement of the dispersion degree in incompatible polyethylene/Nylon 6 blends. 相似文献
The need for a low-cost and weather, high-temperature and oil-resistant rubber is well-established in the market place. Such products have the potential to replace high cost rubbers and/or oil-resistant rubbers that lack weather and high-temperature resistance. The present study aims at increasing the polarity of EP(D)M rubber by chemical modification and cross-linking of EPM copolymer grafted with maleic anhydride (EPM-g-MA). First, it is shown that the oil resistance of rubbers can be predicted using calculated solubility parameters. Next, a variety of modified EPMs has been designed, directed at a high polarity in combination with a relatively low glass transition temperature, and have subsequently been prepared to validate the concepts experimentally. The various modification approaches resulted in (significantly) improved oil resistance and are in fair agreement with the calculated oil swell data. It is concluded that new rubber materials based on EPM-g-MA can be developed, that may replace existing oil-resistant elastomers. 相似文献