多间隙气体开关电晕均压结构优化

电晕针均压的多间隙气体开关,其各间隙电晕电流一致性会直接影响开关的耐压稳定性。在工作气压0.1,0.2,0.3,0.4 MPa条件下,实验测量了六间隙气体开关在不同电压下的各间隙电晕电流。结果显示,针-板间隙电晕电流明显高于针-杆间隙电晕电流。对针-板间隙进行结构调整并进行三维静电场仿真。对调整结构后的针-板间隙进行电晕电流测试,测试数据的变化趋势与仿真结果相符。基于实验和仿真结果,优化了针-板间隙中电晕针的高度,充电25 kV时,开关各间隙电晕电流的相对标准偏差最大为8%。     

多间隙气体开关电晕均压结构优化

电晕针均压的多间隙气体开关,其各间隙电晕电流一致性会直接影响开关的耐压稳定性。在工作气压0.1,0.2,0.3,0.4 MPa条件下,实验测量了六间隙气体开关在不同电压下的各间隙电晕电流。结果显示,针-板间隙电晕电流明显高于针-杆间隙电晕电流。对针-板间隙进行结构调整并进行三维静电场仿真。对调整结构后的针-板间隙进行电晕电流测试,测试数据的变化趋势与仿真结果相符。基于实验和仿真结果,优化了针-板间隙中电晕针的高度,充电25 kV时,开关各间隙电晕电流的相对标准偏差最大为8%。     

750 kV变电站电晕噪声的影响与防治

电晕噪声不同于的传统的电气设备噪声,其发声位置高、频带宽、声源分散,是750 kV变电站噪声控制的薄弱环节.该文以西北某750 kV变电站为例,使用紫外成像仪定位了36处主要电晕噪声点,基于噪声实测和全站声场仿真分析,研究了电晕噪声对变电站声环境的影响.针对主要电晕点的实际情况,提出了具体的电晕噪声防治措施.治理措施在...     

雷云电场作用下长地线表面正极性辉光电晕放电的仿真研究

在雷云电场的缓慢作用下, 一种无流注的正极性辉光电晕在接地物体表面起始, 向周围空间注入大量正极性空间电荷, 从而改变雷电先导对雷击目的物的选择. 本文对雷云电场作用下起始于长地线表面的正极性辉光电晕放电进行了仿真研究; 考虑了正极性离子与其他离子的附着与碰撞作用, 建立了一种精确的二维正极性辉光电晕模型; 并通过在实验室内开展高压电晕放电试验, 测量了不同背景电场下的电晕电流; 与本文所建模型的仿真结果进行对比, 对模型的正确性进行了验证. 基于上述模型, 对正极性辉光电晕在雷云感应作用下的起始发展过程与电晕特性进行了仿真模拟, 得到了该电晕的电晕电流、正离子密度分布规律以及正离子迁移规律. 发现在雷云电场作用下, 电晕放电产生的正离子在迁移初期于垂直于地线的平面内基本呈圆对称状均匀分布, 但随着离子逐渐远离地线其分布不再均匀, 呈拉长的椭圆形分布, 多数离子最终分布于地线上方区域并逐渐向雷云方向迁移; 由于正离子在地线上方迁移区聚集形成的正空间电荷背景对行进电子束具有衰减和消耗作用, 抑制了电子崩的形成, 并降低了电子崩转化为流注的概率, 阻止了新的电子崩对流注的不断注入, 同时正空间电荷背景使气体的碰撞面增大, 增加了与电子的复合概率, 引起大量电子的消耗, 最终抑制了电子崩的形成与流注的发展, 地线表面的上行先导得到抑制.     

基于电晕放电的大功率LED散热研究

针对大功率LED芯片的散热问题,提出了一种基于电晕放电原理的离子风散热方案。通过试验,研究了电晕放电的电学性能,同时探寻了放电电压对制冷效果的影响以及温降随电晕放电功率的变化规律。结果表明,放电间距相同时,对发生器施加负电晕能够在较低的电压下产生离子风,降温效果显著。电晕电流平方根与放电电压呈线性关系。电晕放电功率为1.5 W、放电间距为10 mm时,散热效果最好。     

环形电极单间隙电晕放电伏安特性

基于用于直线变压器型驱动源的多间隙气体开关结构,提出一种环形放电间隙与电晕针并联的气体火花间隙。通过测量间隙耐压过程中电晕放电的伏安特性,研究了气体介质、气压、电晕极性、电晕针长度以及针尖对应电极结构等因素对伏安特性的影响。结果表明：以空气为绝缘气体,负极性电晕可获得较稳定的伏安特性;改变电晕针长度和针尖对应电极结构可方便地实现对电晕放电伏安特性的调节以满足开关要求。     

高灵敏度电晕放电辐射信号探测方案

为了实现复杂电磁环境下电晕放电辐射信号的探测,从信号特征入手,通过对电晕电流的计算和模拟实验,揭示了电晕放电的时、频域特征。在分析自然环境下噪声频率分布规律的基础上,设计了窄频段探测技术,通过设计特定频段的定向天线、增加高频宽带低噪声放大器、应用数字处理终端等方式,搭建了高灵敏度的微弱信号探测系统,成功探测到自然环境中600m外的电晕放电辐射信号。实验结果充分证明了电晕放电辐射信号的远距离探测的可行性,为电晕放电目标探测提供了重要的技术手段。     

环形电极单间隙电晕放电伏安特性

基于用于直线变压器型驱动源的多间隙气体开关结构,提出一种环形放电间隙与电晕针并联的气体火花间隙。通过测量间隙耐压过程中电晕放电的伏安特性,研究了气体介质、气压、电晕极性、电晕针长度以及针尖对应电极结构等因素对伏安特性的影响。结果表明:以空气为绝缘气体,负极性电晕可获得较稳定的伏安特性;改变电晕针长度和针尖对应电极结构可方便地实现对电晕放电伏安特性的调节以满足开关要求。     

高灵敏度电晕放电辐射信号探测方案

为了实现复杂电磁环境下电晕放电辐射信号的探测,从信号特征入手,通过对电晕电流的计算和模拟实验,揭示了电晕放电的时、频域特征。在分析自然环境下噪声频率分布规律的基础上,设计了窄频段探测技术,通过设计特定频段的定向天线、增加高频宽带低噪声放大器、应用数字处理终端等方式,搭建了高灵敏度的微弱信号探测系统,成功探测到自然环境中600 m外的电晕放电辐射信号。实验结果充分证明了电晕放电辐射信号的远距离探测的可行性,为电晕放电目标探测提供了重要的技术手段。     

电晕均压多间隙串联气体开关特性实验

研制了一种电晕放电均压的小型多间隙串联气体开关,分析了电晕放电在开关工作过程中的作用,开展了开关自击穿特性、电晕放电伏安特性、针尖烧蚀以及开关寿命测试等特性实验。结果表明:老练后开关自击穿电压标准偏差小于3.5%,电晕均压效果明显;随着放电次数增加,电晕针尖逐渐钝化,触发性能变化不大;开关电晕放电电流随耐受电压升高增大,增长趋势逐渐变快;开关充400 kPa干燥空气,100 kV工作电压下开关放电50 000次以上,触发性能稳定,触发击穿时延抖动约4.3 ns,自放电概率低于110-4。     

Experimental and modelling study of the dependence of corona discharge on electrode geometry and ambient electric field

The results of experimental observations and mathematical modeling of corona formation on the tips of grounded rods are presented as a function of their tip height, curvature radius, the magnitude and polarity of the applied electric field producing corona. The investigations demonstrate that corona current depends on the active volume of zone in which electric field strength exceeds the breakdown criteria for air. The mathematical model was verified with the experimental data, enabling dependence of corona current on rod tip height, tip radius and applied electric field strength to be quantified with the need for a plethora of experiments.     

Study on both discharge and charging of the earthed atomizing corona discharge and the influence of magnetic fields on them

In the paper, the influences of water flux on both discharge current and onset voltage were studied. Both charging and capturing particles of atomizing corona discharges were investigated when the magnetic field was used or not. The charge number of droplets and their sizes were calculated after some parameters were measured by Millikan oil drop instrument. In addition, the capturing ability of atomizing corona discharge pre-charger with magnetic field was compared with the traditional pre-charger. Eventually, the charging mechanism of atomizing corona discharge with magnetic field was analyzed through the above-mentioned experimentation and comparison. The result shows that the smallest onset voltage will appear with water flow increase in the atomizing corona discharge, and that the ion concentration between electrodes is the highest in the atomizing corona discharge charger with magnetic field than any other pre-charger, which is conducive for charging dust particles. Hence the new pre-charging technique is promising for capturing fine aerosol particles in electrostatic precipitators.     

Effect of relative humidity on current–voltage characteristics of monopolar DC wire-to-plane system

This paper deals with the DC monopolar corona discharge in wire-to-plane geometry under variable humid air conditions. The classical formulas of Townsend commonly used for the current–voltage characteristics were used to determine the various corona parameters for the both polarities of the corona discharge. A circular biased probe has been adapted to the plane and is used to measure the ground plane current density and electric field during the monopolar corona discharge. A new approach to the problem of corona discharge in transmission system has been described in this paper. The effect of varying the humidity and wires diameter is also investigated. The values of the electric field and the current density are maximum beneath the corona wire and decrease when moving away from them and the current–voltage characteristics follow the quadratic Townsend's law. The experimental results show that the monopolar corona discharge is strongly affected by the air humidity. The current density and the electric field are measured and compared with the computed values. The agreement between the calculated values and those obtained experimentally is satisfactory. The per unit electric field and current density are also represented by a unique function.     

针板型电晕稳定开关的电晕稳定性

设计了一款可用于触发和自触发的针板型电晕稳定开关,其中针电极直径为2 mm,主间隙距离为10 mm,触发间隙为5 mm。通过静电场的模拟得知其场强的不均匀系数大于7,并且通过大量实验数据得出:开关起晕电压和击穿电压分别为6.8 kV和19.3 kV,由此得知电晕稳定开关的电晕稳定因子为0.55,这说明开关具有较好的电晕稳定性。     

针板型电晕稳定开关的电晕稳定性

设计了一款可用于触发和自触发的针板型电晕稳定开关,其中针电极直径为2 mm,主间隙距离为10 mm,触发间隙为5 mm。通过静电场的模拟得知其场强的不均匀系数大于7,并且通过大量实验数据得出：开关起晕电压和击穿电压分别为6.8 kV和19.3 kV,由此得知电晕稳定开关的电晕稳定因子为0.55,这说明开关具有较好的电晕稳定性。     

Effect of air flow on corona discharge in wire-to-plate electrostatic precipitator

This paper analyses corona discharge in ambient air with laboratory-scaled wire-to-plate electrostatic precipitator (WPESP). The electric field is behind the electro hydrodynamic (EHD) flow in air. Its measurements provide complementary results for the corona discharge study because the classical theory based on the current and voltage data is unsatisfactory. Taking into account the dynamic air flow velocity is perpendicular to the active wires, measurement method of the positive and negative DC corona current density and electric field, has been introduced. It has been shown also that the dynamic air flow velocity modifies the current density and the electric field distributions on the planes surfaces of the WPESP.     

Negative corona discharge from a water droplet under the pulsating DC field

Corona discharge from a fine water droplet always involves deformation of the droplet shape or Taylor-cone formation, emission of fine water jets or disruption of droplet. Therefore, corona discharge from a water droplet always manifests complicated aspects. In addition, disruption of Taylor cone simultaneously affects not only discharge current but also motion of water droplet. To confirm corona discharge phenomena from a water droplet protruded from a tip of a metal capillary tube with a diameter of 1 mm, negative corona discharge was investigated by using a water droplet located at a tip of grounded rod electrode facing a ring electrode with positive dc voltage superimposed by ac one. Since the droplet has inherent resonant vibrating frequency defined by the size or volume, the volume of water droplet was adjusted at 20 nL where the corresponding resonant frequency was 500 Hz. The period of the event of successive corona discharge is exactly consistent with resonant frequency defined by the size of the water droplet. As a result, corona pulse trains with a definite duration appeared intermittently corresponding to its resonant vibration. When dc voltage superimposed by ac voltage with resonant frequency of 500 Hz was applied to the water droplet, corona pulse trains appeared at the period corresponding to the frequency. The maximum value of corona current reasonably increased with the applied voltage. Even when the frequency of ac field superimposed on dc field was varied from the resonant frequency, corona pulse trains occur corresponding to not only the superimposed field frequency but also resonant frequency.     

电磁场辐照诱发真空电晕放电模拟试验系统

为研究真空环境下电磁场诱发针-板电晕放电特性,研制了电磁场发生器、真空系统、高压静电源、动态电位测试仪等组成的电磁场辐照诱发真空电晕放电模拟试验系统。该系统可实现真空管内气压为80 Pa的低真空环境,并利用此系统进行在电磁场的作用下的电晕放电试验,初步得到了电磁场辐照诱发电晕放电的阈值电压的变化规律。试验结果表明:当温度、湿度等其他环境因素基本不变,真空管内气压为80 Pa时, 正常放电阈值为-590 V, 利用负极性高压静电放电, 电压取值范围10~20 kV, 产生的电磁脉冲辐射作用于真空管内充电区域,可使放电阈值降低90~180 V。     

电磁场辐照诱发真空电晕放电模拟试验系统

为研究真空环境下电磁场诱发针-板电晕放电特性,研制了电磁场发生器、真空系统、高压静电源、动态电位测试仪等组成的电磁场辐照诱发真空电晕放电模拟试验系统。该系统可实现真空管内气压为80 Pa的低真空环境,并利用此系统进行在电磁场的作用下的电晕放电试验,初步得到了电磁场辐照诱发电晕放电的阈值电压的变化规律。试验结果表明：当温度、湿度等其他环境因素基本不变,真空管内气压为80 Pa时, 正常放电阈值为-590 V, 利用负极性高压静电放电, 电压取值范围10~20 kV, 产生的电磁脉冲辐射作用于真空管内充电区域,可使放电阈值降低90~180 V。     

Formation Mechanism of the So-Called Corona Figure

A dense radial array of chromium microneedles is formed on a field-emission cathode interacting with a negative corona discharge in ambient Cr(CO)6 of the order of 10-2 torr. The article discusses physical and chemical processes which underlie the formation of this so-called corona figure, based on extensive electron microscope observations. The overall shape of a corona figure is a function of the substrate geometry, indicating that field electrons emitted from the substrate play a vital role in nucleating the figure. A negative electric field curves the growth direction of the needles that compose the figure, and a high magnetic fileld applied externally well aligns them along magnetic-field lines. These facts support strongly the hypothesis that the figure is formed as the electron avalanches, originating at the substrate, propagate outward. The technical term "field-emission corona" is proposed for the present corona discharge, because the discharge is initiated and sustained by field-emitted electrons.