Thickness dependence of the magnetic properties and magnetoimpedance effect in CoFeAlO thin films

The change of the magnetic properties and magnetoimpedance effect of Co–Fe–Al–O thin films with film thicknesses 50–1200 nm has been investigated. The coercivity and the anisotropy field changed strongly with increase of film thickness, while the saturation induction almost remained unchanged. The maximum value of GMI effect obtained about 33% for a film thickness of 1200 nm.     

The effect of strain and interfaces on the orbital moment in Fe/V superlattices

The dependence of the Fe orbital moment on strain and interfaces in Fe/V superlattices has been investigated by X-ray magnetic circular dichroism (XMCD). The orbital moment was determined to be lower at the interfaces than in the bulk, which we attribute to Fe–V hybridization. An enhancement of the orbital moment with increasing strain in the Fe layers was observed. This enhancement is attributed to an unquenching of the orbital moment. Consequently, the orbital moment of Fe in Fe/V is concluded to be influenced by two competing parameters. It is lowered by increasing interface density, and enhanced by increasing strain.     

Process-dependent magnetic properties of Co-doped ZnO in bulk and thin film form

Structural, optical and magnetic studies of Co-doped ZnO have been carried out for bulk as well as thin films. The magnetic studies revealed the superparamagnetic nature for low-temperature synthesized samples, indicating the presence of cobalt metallic clusters, and this is supported by the optical studies. For the high-temperature sintered samples one obtains paramagnetism. The optical studies reveal the presence of Co²⁺ ions in the tetrahedral sites indicating proper doping. Interestingly, the films deposited by laser ablation from the paramagnetic target showed room temperature ferromagnetism. It appears that the magnetic nature of this system is process dependent.     

Field dependence of spin and orbital moments of Fe in L10 FePt magnetic thin films

The field dependence of spin and orbital magnetic moments of Fe in L1₀ FePt magnetic thin films was investigated using X-ray magnetic circular dichroism (XMCD). The spin and orbital moments were calculated using the sum rules; it was found that the spin and orbital moment of Fe in L1₀ FePt films are ∼2.5 and 0.2 μ_B, respectively. The relative XMCD asymmetry at Fe L₃ peak on the dependence of applied field suggested that the majority magnetic moment of L1₀ FePt films resulted from Fe.     

Pre-edge features in X-ray absorption structure of Mn in GaMnN,GaMnAs and GeMn

_Ga1-xMnxN${\mathrm{Ga}}_{1-x}{\mathrm{Mn}}_x\mathrm{N}$ samples with a wide range of concentrations, from x=0.003$x=0.003$ to 0.057, were grown by molecular beam epitaxy. X-ray diffraction and the simulation of the extended X-ray absorption fine structure (EXAFS) confirmed the wurtzite structure of the samples, without any secondary phase, and the location of Mn in the gallium sublattice of GaN. The valence state of Mn was studied using the X-ray absorption near-edge structure (XANES) at the K-edge of Mn. The shape of the measured XANES spectra does not depend on the Mn concentration: that implies the same valence state and local atomic structure around the Mn atom in all samples. A calculation of the electronic band structure of GaMnN, GaMnAs, GeMn and the XANES spectra of Mn in GaMnN was performed using the linearized augmented plane wave (LAPW) method. The calculated spectra fit well our experimental data. In particular, the comparison demonstrates that a peak in the pre-edge structure is directly related to the 3+$3+$ valence state of Mn. This was confirmed experimentally by measurements of the Mn K-edge in GaMn²⁺As${\mathrm{GaMn}}^{2+}\mathrm{As}$ and ZnMn²⁺Te${\mathrm{ZnMn}}^{2+}\mathrm{Te}$. An application of proposed interpretation for GeMn is discussed.     

Nd composition dependence of microstructure and magnetic properties for gradient sputtered NdFeB films

NdFeB films with Nd compositions varied from 13.34 to 24.30 at% were deposited by DC gradient sputtering using targets Nd_12.5Fe_71.5B₁₆ and Nd. The hard magnetic properties, grain growth direction and magnetic domain structures were dramatically influenced by Nd composition. The samples with intermediate Nd concentrations exhibited optimal magnetic properties and microstructures, such as large squareness ratio over 0.9, large energy product up to 174 kJ/m³, and vertical domain structure. However, the samples with higher and lower Nd compositions showed almost isotropic loops. (0 0 l) as main X-ray diffraction peaks in the optimal Nd composition region indicated most of Nd₂Fe₁₄B grains with c-axis perpendicular to the film plane, while NdFeB grains in other region are almost random growth. The good magnetic properties can be attributed to the vertical growth of Nd₂Fe₁₄B grains.     

Effect of Co layer thickness on the magnetic properties of Tb30Co70/SiNx/Co thin films

The SiN_x (20 nm)/Tb₃₀Co₇₀ (90 nm)/SiN_x (5 nm)/Co (3–37 nm)/SiN_x (10 nm)/Si multilayer films are deposited on naturally oxidized Si wafer by magnetron sputtering. The saturation magnetization (M_s) of the multilayer films is increased with the thickness of high M_s ferromagnetic Co layer. The perpendicular coercivity (_Hc⊥$H_{{\mathrm{c}}^{\perp }}$) value is increased with Co layer thickness as the thickness of the Co layer is lower than 15 nm and then decreases drastically when the thickness of the Co layer further increased. The increase of the _Hc⊥$H_{{\mathrm{c}}^{\perp }}$ value is owing to the interlayer exchange effect [Li Zhang, Physica B 390 (2007) 373] between TbCo and Co layers. Co under-layer with in-plane magnetic anisotropy would pin the magnetic moment of the TbCo layer near by the Co layer and cause the value of _Hc⊥$H_{{\mathrm{c}}^{\perp }}$ to increase. However, as the Co layer is thicker than a critical thickness, the _Hc⊥$H_{{\mathrm{c}}^{\perp }}$ value of the multilayer film would decrease. Therefore, the Co layer with in-plane magnetic anisotropy and soft magnetic properties is expected to dominate the magnetic properties of the multilayer films.     

Growth and characterization of ferromagnetic MnAs films on different semiconductor substrates

MnAs thin films were grown by metalorganic vapour-phase epitaxy (MOVPE) on GaAs(0 0 1), Si(0 0 1) and oxidised silicon substrates. All films are crystalline and contain only the ferromagnetic α-MnAs phase. X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements show that films on GaAs(0 0 1) have strong preferential orientation, developing elongated grains parallel to [1 –1 0] GaAs while films on bare and oxidised Si are polycrystalline with irregular-shaped, randomly oriented grains. Magneto-optic Kerr effect (MOKE) measurements show good magnetic properties for films on GaAs, such as strong in-plane anisotropy and squareness of the hysteresis loop in the easy direction. A Curie temperature of 340 K, remarkably higher than the bulk material (315 K), was found for a 65 nm thick film on GaAs. Films grown on bare and oxidised silicon wafers had lower Curie temperature and were magnetically isotropic.     

Soft magnetic properties of FeCo films with Co underlayer

Bilayered Fe₆₅Co₃₅ (=FeCo)/Co films were prepared by facing targets sputtering with 4πM_s∼24 kg. The soft magnetic properties of FeCo films were induced by a Co underlayer. H_c decreased rapidly when the Co underlayer was 2 nm or more. The films showed well-defined in-plane uniaxial anisotropy with the typical values of H_ce=10 Oe and H_ch=3 Oe, respectively. High frequency characteristics of the films show the films can work at 0.8 GHz with real permeability as high as 250.     

Magnetic properties of electroplated wires coated by ferrofluid

Low-frequency magnetic properties of ferromagnetic composite wires were studied with and without coating by ferrofluid. Non-magnetic CuBe wires of 0.1 mm diameter were electroplated with FeCoNi layer of 1 μm thickness. Magnetization curves were measured in the frequency range of 10 Hz–3 kHz. The composite CuBe/FeCoNi/ferrofluid material shows a hysteretic behaviour in a small field. The hysteresis loop of ferrofluid covered electroplated wire is not a simple sum of the ferrofluid “wire” plus non-covered wire signals. It indicates an interaction between magnetic wire and ferrofluid which can be revealed by low-frequency measurements. The combination “electroplated wire/ferrofluid” can be considered as a new type of composite magnetic material consisting of solid magnetic core coated by complementary liquid magnetic material. Low-frequency measurements in presence of ferrofluid can be a useful method to study magnetic properties of ferromagnets.     

Influence of heat treatment on the structure and magnetic properties of the Co/Zr and Co/Hf multilayer amorphous films

The influence of annealing on the structure and magnetic properties of amorphous Co/Zr and Co/Hf multilayer films was studied with particular attention to the dependence of the magnetic properties, thermal stability and crystallization process on layer composition and thickness. The temperature at which crystallization commences increases from 400 to 460 °C as the layer thickness d_Zr or d_Hf increases from 6 to 18 Å, and decreases from 450 to 400 °C as d_Co increases from 12 to 18 Å. Multilayers containing 19–60 at% Zr were studied. The specific magnetization was found to increase even below the temperature at which crystallization commences. Our data are compared with non-multilayer Co–Zr amorphous films and rapidly quenched metallic glasses.     

Ferromagnetism of epitaxially grown CaRu1−xMxO3 (M=Ti, Mn) films

Epitaxial thin films of CaRu_1−xM_xO₃ (M=Ti, Mn) were fabricated on a (0 0 1)-SrTiO₃ substrate by spin-coat method using organometallic solutions (metal alkoxides). Results of X-ray diffraction and transmission electron microscopy indicate that the epitaxial films were grown pseudomorphically so as to align the [0 0 l] axis of the CaRu_1−xM_xO₃ films perpendicular to the (0 0 1) plane of the SrTiO₃ substrate. Ferromagnetism and metal-insulator transition are induced by the substitution of transition metal ions. The occurrence of ferromagnetism was explained qualitatively assuming a TiRu₆ cluster model for CaRu_1−xTi_xO₃ film and a mixed valence model for CaRu_1−xMn_xO₃ film. Ferromagnetism was also observed for layered CaRuO₃/CaMnO₃ film and CaRuO₃/CaMnO₃/CaRuO₃/CaMnO₃ multilayer film and the magnetism was explained by an interfacial exchange interaction model with magnetic Mn³⁺, Mn⁴⁺, and Ru⁵⁺ ions.     

Microstructure evolution and magnetic properties of Co-B coatings electrolessly plated on hollow microspheres

The composites of Co-B coatings on hollow microspheres (Co-B/HMSs) have been successfully synthesized through electroless plating in this paper. The time-dependent microstructure evolution and magnetic properties of the composites were carefully investigated by scanning electron microscope (SEM), energy dispersive X-ray (EDX), and X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM). It was found that small Co-B clusters appeared on the surface of hollow microspheres at catalytic nuclei during the initial stage. Further growth, they converged to form continuous coatings, which were actually stacking of Co-B nuclei. Interestingly, there was an increment of B content in the coating as time wore on, this phenomenon could be interpreted by electrochemical mechanism. Besides, the composites showed magnetic properties, which might be potentially important for the novel materials as magnetic carriers.     

Intermittent deposition and interface formation on the microstructure and magnetic properties of NiFe/Cu composite wires

In this work, magnetron sputtering in the form of continuous deposition or intermittent deposition modes was used to obtain NiFe/Cu composite wires. Based on the results, intermittent deposition mode led to the formation of an interface between deposited layers. A better crystallite and a little grain growth were found for the intermittently deposited wire. Good soft magnetic properties and large giant magneto-impedance (GMI) effect were exhibited by both composite wires. The GMI profile for the intermittently deposited composite wire was characterized by two peaks, which could be attributed to the difference in the magnetic properties of the inner and the outer magnetic layers. Annealing was introduced to the intermittently deposited wire so that the inherent stresses were partially relaxed. As a result, its GMI effect was enhanced and the magnetic properties of the two magnetic layers became similar. Hysteresis loops of the composite wires displayed different magnetic behaviors and hence further affirmed the GMI results.     

Epitaxial MnP thin films: epitaxial growth,magnetic and electrical properties

We have grown 500 Å MnP on undoped GaAs(1 0 0) substrate using solid-source molecular beam epitaxy. In order to characterize the crystal structure of MnP, we performed in-situ reflection high energy electron diffraction and θ–2θ XRD X-ray diffraction studies. From the measurements of superconducting quantum interference device, Quantum Design, MnP thin film shows ferromagnetic ordering at around 291.5 K. It shows a metallic resistivity in MnP thin film.     

Microstructure, magnetic and optical properties of sputtered polycrystalline ZnO films with Fe addition

Microstructure, magnetic and optical properties of polycrystalline Fe-doped ZnO films fabricated by cosputtering with different Fe atomic fractions (x_Fe) have been examined systematically. Fe addition could affect the growth of ZnO grains and surface morphology of the films. As x_Fe is larger than 7.0%, ZnFe₂O₄ grains appear in the films. All the films are ferromagnetic. The ferromagnetism comes from the ferromagnetic interaction activated by defects between the Fe ions that replace Zn ions. The average moment per Fe ion reaches a maximum value of 1.61 μ_B at x_Fe = 4.8%. With further increase in x_Fe, the average moment per Fe ion decreases because the antiferromagnetic energy is lower than the ferromagnetic one due to the reduced distance between the adjacent Fe ions. The optical band gap value decreases from 3.245 to 3.010 eV as x_Fe increases from 0% to 10%. Photoluminescence spectra analyses indicate that many defects that affect the optical and magnetic properties exist in the films.     

Structure, magnetic and optical properties of polycrystalline Co-doped TiO2 films

Co-doped TiO₂ films were fabricated under different conditions using reactive facing-target magnetron sputtering. Co doping improves the transformation of TiO₂ from anatase phase to rutile phase. The chemical valence of doped Co in the films is +2. All the films are ferromagnetic with a Curie temperature above 340 K. The average room-temperature moment per Co of the Co-doped TiO₂ films fabricated at 1.86 Pa decreases from 0.74 μ_B at x=0.03 to 0.02 μ_B at x=0.312, and decreases from 0.54 to 0.04 μ_B as x increases from 0.026 to 0.169 for the Co-doped TiO₂ films fabricated at 0.27 Pa. The ferromagnetism originates from the oxygen vacancies created by Co²⁺ dopants at Ti⁴⁺ cations. The optical band gaps value (E_g) of the Co-doped TiO₂ films fabricated at 1.86 Pa decreases linearly from 3.35 to 2.62 eV with the increasing x from 0 to 0.312. For the Co-doped TiO₂ films fabricated at 1.86 Pa, the E_g decreases linearly from 3.26 to 2.53 eV with increasing x from 0 to 0.350.     

The growth of soft magnetic FeNiN thin films under different experimental procedures

FeNiN thin films with good soft magnetic properties were synthesized on Si (1 0 0) substrates at 473 K by RF magnetron sputtering. The dependence of phase structure and magnetic properties on nitrogen partial pressure, nickel concentrations, film thickness and substrate temperature were systematically investigated. The phase evolution from α-(Fe,Ni)N to ξ-(Fe,Ni)₂N with increase of nitrogen partial pressure was seen. The addition of Ni caused FeNiN films to turn from BCC structure to FCC structure. Clear reproducible striped domains appeared at the film surfaces when X_Ni=19.6%, which is explained by the high enough perpendicular anisotropy and the small stress in the film. All films show smooth surfaces and good soft magnetic properties compared to corresponding FeN compounds. The magnetic properties depended dramatically on the phase structure. Optimum soft magnetic properties with H_C of <1 Oe are obtained between 5.0%?X_Ni?10.0%.     

Optical and magnetic properties of laser-deposited Co-doped ZnO thin films

We report the optical and magnetic properties of laser-deposited Zn_1−xCo_xO (x=0.06-0.3) thin films with no intentional electrical carrier doping. The analysis of the high-temperature magnetization data provides an unambiguous evidence that antiferromagnetic superexchange interaction is the dominant mechanism of the exchange coupling between Co ions in Zn_1−xCo_xO alloy, yielding the value of the effective exchange integral J₁/k_B to be about −27 K. The low-temperature magnetization data reveals a spin glass transition in Zn_1−xCo_xO alloy for the Co content x>0.15, giving the value of the spin freezing temperature T_f to be ∼8 and ∼12 K for x=0.2 and 0.25, respectively. Optical spectra analysis shows a linear increase of the band gap E_g with the increase of the Co content following E_g=3.231+1.144x eV.