Nanocrystals and amorphous matrix phase studies of Finemet-like alloys containing Ge

Two simple models were developed in order to determine the chemical composition of both nanocrystals and intergranular amorphous phases in nanocrystallized Fe_73.5Si_13.5B₉Nb₃Cu₁ containing Ge using data from X-ray diffraction and Mössbauer spectroscopy techniques. Saturation magnetization of the amorphous intergranular matrix (M_s^am) was calculated considering the contribution of the α-Fe(Si,Ge) nanocrystals and saturation magnetization of the alloys. The behavior of M_s^am with the iron content of the matrix was obtained and discussed. The exchange stiffness constant for the nanograins and for the amorphous phases was determined. The increment in the coercive field (H_c) with increasing Ge content was evaluated using two theoretical models for the random magnetocrystalline anisotropy constant (〈K₁〉). Results show that the magnetic hardening observed could not be attributed to an increase in 〈K₁〉 but mainly to an important increment of the magnetostriction constant of the α-Fe(Si,Ge) nanocrystals (λ_s^cr). Values for λ_s^cr are proposed.     

Coercivity of anisotropic γ-Fe2O3 particles at high temperatures

The coercivity of five different samples of anisotropic γ-Fe₂O₃ particles is studied in the temperature range 0°–600°C. It is found that their relative coercive force h _c = H _c (T)/H _c (0) is almost a linear function of the relative magnetization of the particles m _s = M _s (T)/M _s (0), where H _c (0) and M _s (0) are the values of H _c and M _s of the particles at 0°C. It is experimentally found that h _c = βm _s + α, where β = 1.103 ± 0.015 and α = ?0.114 ± 0.009. This character of the dependence of h _c on m _s suggests that, at high temperatures, H _c of anisotropic γ-Fe₂O₃ particles can depend on both their shape anisotropy and other factors. It is assumed that, as the temperature increases, anisotropic γ-Fe₂O₃ particles in a zero magnetic field are divided into small structurally and magnetically unstable nanoclusters with magnetization spontaneously changing its direction. As a result, H _c disappears near the Curie temperature, although the saturation magnetization of the particles in a field of 1 T is still retained at this temperature.     

Magnetic properties and formation of Sr ferrite nanoparticle and Zn,Ti/Ir substituted phases

Strontium hexaferrite nanoparticles are prepared by the chemical sol–gel route. Specific saturation magnetization σ_s and coercive field strength H_c are determined depending on the heat treatment of the gel and iron/strontium ratio in the starting solution. These ultrafine powders with single-domain behavior have specific saturation magnetization σ_s=74 emu/g and coercive field strength H_c=6.4 kOe. Experimental results show that it is necessary to preheat the gel between 400 and 500°C for several hours . It can prevent the formation of intermediate γ-Fe₂O₃ and help to obtain ultrafine strontium ferrite single phase with narrow size distribution at a low annealing temperature. Additionally, the magnetic properties of sol–gel derived strontium ferrite with iron substituted by Zn²⁺, Ti⁴⁺ and Ir⁴⁺ are discussed. For an amount of substitution 0<x⩽0.6, the (Zn, Ti)_x substituted strontium ferrite shows higher values of both coercive field strength and saturation magnetization than the (Zn, Ir)_x substituted phase.     

机械合金化Fe-Si合金的微结构与磁性

用机械合金化方法制备了不同成分的Fe-Si合金．其晶粒具有α-Fe结构，粒径为十几到几十纳米，且晶格存在严重畸变．它们的饱和磁化强度σ_s与Si含量近似成线性关系，只是稍小于相应的单晶和多晶Fe-Si合金，而其矫顽力H_c和有效各向异性常数K_eff却远大于相应的单晶和多晶Fe-Si合金．它们的磁谱除Fe₇₅Si₂₅外都是弛豫型的，其磁导率的大小与相应的铁氧体复合材料差不多．在它们的磁化过程中，畴壁位移 关键词：     

具有宽过冷液相区的Fe62Co8-x(Cr,Mo)xNb4Zr6B20非晶态合金的热稳定性与磁性

根据制备块状非晶态合金的三条经验准则,选择了成分为Fe₆₂Co_8-xCr_xNb₄Zr₆B₂₀和Fe₆₂Co_8-xMo_xNb₄Zr₆B₂₀(x=0,2,4)的合金系.利用单辊急冷法制备出厚为30μm宽为5mm左右的条带,并用差热分析、X射线衍射以及 关键词： 过冷液相区 铁磁性 非晶态合金     

Magnetic properties of metastable Gd-Cr alloys

We report on the magnetization, magnetocaloric effect, magnetic ordering temperatures, saturation magnetic moments and anisotropy of sputter-deposited Gd_xCr_1−x alloys with Gd atomic concentrations, x, ranging from 0.13 to 0.52. The complex magnetic nature of the Gd-Cr films was revealed from the M×H isotherms, which do not show saturation even at an applied field of 70 kOe and a temperature of 2 K and do not exhibit a linear behavior at higher temperatures. For some of the samples, the isotherms were used to determine the isothermal entropy variation as a function of temperature, for a change of 50 kOe in the applied magnetic field. The saturation magnetic moment varies with x and follows the dilution law, implying that the Cr atoms do not contribute to the total moment of the Gd-Cr alloys. Both static magnetization and dynamic susceptibility measurements reveal the existence of a magnetic glassy behavior in the alloys, which occurs below a freezing temperature. The existence of anisotropy at low temperatures for all samples was revealed by their M×H hysteresis loops from which the in-plane coercive fields, H_c, were determined. A monotonical increase in H_c with increasing Gd concentration was observed.     

Magnetic properties of Fe<Subscript>3</Subscript>C ferromagnetic nanoparticles encapsulated in carbon nanotubes

The low-temperature dependences of magnetic characteristics (namely, the coercive force H _c , the remanent magnetization M _r , local magnetic anisotropy fields H _a, and the saturation magnetization M _s ) determined from the irreversible and reversible parts of the magnetization curves for Fe₃C ferromagnetic nanoparticles encapsulated in carbon nanotubes are investigated experimentally. The behavior of the temperature dependences of the coercive force H _c (T) and the remanent magnetization M _r (T) indicates a single-domain structure of the particles under study and makes it possible to estimate their blocking temperature T _B = 420–450 K. It is found that the saturation magnetization M _s and the local magnetic anisotropy field H _a vary with temperature as ～T ^5/2.     

Influence of annealing on magnetic properties of Co-based metallic glasses

The influence of low-temperature annealing on the magnetic hysteresis loop parameters of magnetostrictive Co-Si-B and nonmagnetostrictive Co-Fe-Si-B glasses was studied. The dependence of Curie temperature (T_C), crystallization temperature (T_x), full-stress-relaxation temperature, saturation magnetostriction constant, saturation magnetization and coercive field H_c on metalloids contents for as quenched Co_100-x(Si_0.5B_0.5)_x glasses was determined.It was found that annealing enhances remanence magnetization for all investigated Co-Si-B glasses. The coercive field of these glasses is influenced by annealing owing to: stress relaxation (resulting in an H_c decrease) and domain structure stabilization (resulting in an H_c increase). Significant H_c reduction for both magnetostrictive and non-magnetostrictive glasses was observed, after annealing above T_C. For glasses with T_C<>T_x, it was necessary to apply an external magnetic field in ord er to decrease H_c.It was found that non-magnetostrictive metallic glasses with low Curie temperatures (T_C ? 450 K) exhibit the most stable magnetic hysteresis loop parameters.     

Effect of a high magnetic field on the morphology and magnetic properties of the MnBi compound during the Mn1.08Bi-MnBi phase transformation process

Effect of a 10 T high magnetic field on the morphology and magnetic properties of the MnBi compounds during the Mn_1.08Bi-MnBi phase transformation has been investigated. Results indicate that the field has split the MnBi crystal along the (0 0 1)-crystal plane during the Mn_1.08Bi-MnBi phase transformation process and the split MnBi crystals align and aggregate along the magnetic field direction. Along with the change of the MnBi phase morphology, the magnetic property changes greatly. Indeed, with the alignment and aggregation of the spit MnBi phases, the saturation magnetization M_s and the magnetic susceptibility χ increase, and the coercive field H_c and the remnant magnetization M_r decrease. This implies that a high magnetic field may have caused the magnetic property of the MnBi phase to transform towards soft magnetism. Above results may be attributed to the enhancement of the magnetization and the Mn_1.08Bi-MnBi phase transformation in a high magnetic field.     

Effect of magnetic field on the TC and magnetic properties for the aligned MnBi compound

In the compound MnBi, a first-order transition from the paramagnetic to the ferromagnetic state can be triggered by an applied magnetic field and the Curie temperature increases nearly linearly with an increase in magnetic field by ∼2 K/T. Under a field of 10 T, T_C increases by 20 and 22 K during heating and cooling, respectively. Under certain conditions a reversible magnetic field or temperature induced transition between the paramagnetic and ferromagnetic states can occur. A magnetic and crystallographic H-T phase diagram for MnBi is given. Magnetic properties of MnBi compound aligned in a Bi matrix have been investigated. In the low temperature phase MnBi, a spin-reorientation takes place during which the magnetic moments rotate from being parallel to the c-axis towards the basal plane at ∼90 K. A measuring Dc magnetic field applied parallel to the c-axis of MnBi suppresses partly the spin-reorientation transition. Interestingly, the fabricated magnetic field increases the temperature of spin-reorientation transition T_s and the change in magnetization for MnBi. For the sample solidified under 0.5 T, the change in magnetization is ∼70% and T_s is ∼91 K.     

Growth temperature dependence of the hysteretic behavior of Ni0.5Zn0.5Fe2O4 thin films

Herein, a discussion of the effect of deposition temperature on the magnetic behavior of Ni_0.5Zn_0.5Fe₂O₄ thin films. The thin films were grown by r.f. sputtering technique on (1 0 0) MgO single-crystal substrates at deposition temperatures ranging between 400 and 800 °C. The grain boundary microstructure was analyzed via atomic force microscopy (AFM). AFM images show that grain size (φ∼70-112 nm) increases with increasing deposition temperature, according to a diffusion growth model. From magneto-optical Kerr effect (MOKE) measurements at room temperature, coercive fields, H_c, between 37and 131 Oe were measured. The coercive field, H_c, as a function of grain size, reaches a maximum value of 131 Oe for φ ∼93 nm, while the relative saturation magnetization exhibits a minimum value at this grain size. The behaviors observed were interpreted as the existence of a critical size for the transition from single- to multi-domain regime. The saturation magnetization (21 emu/g<M_s<60 emu/g) was employed to quantify the critical magnetic intergranular correlation length (L_c≈166 nm), where a single-grain to coupled-grain behavior transition occurs. Experimental hysteresis loops were fitted by the Jiles-Atherton model (JAM). The value of the k-parameter of the JAM fitted by means of this model (k/μ_o∼50 A m²) was correlated to the domain size from the behavior of k, we observed a maximum in the density of defects for the sample with φ∼93 nm.     

Magnetic Properties of Composite Materials Based on a Solid Solution of Type (CuInSe<Subscript>2</Subscript>)<Subscript>1 – <Emphasis Type="Italic">x</Emphasis></Subscript>(MeSe)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> (Me = Mn,Fe) and Polyethylene

Basic magnetic characteristics (coercive force H_c, residual magnetization M_r, magnetization M, and saturation magnetization M_s) of solid solutions of type (CuInSe₂)_1–x(MeSe)_x (Me = Mn, Fe) have been investigated in a wide temperature interval (100–300 K). The existence of a magnetic phase transition has been established for all studied solid solutions at low temperatures, and the Néel temperatures have been determined from the temperature dependences of the magnetization. It is shown that the temperature dependences of coercive force H_c and of magnetization M can be described using the thermal relaxation (fluctuation) theory.     

Fabrication and characterization of magnetic Fe3O4-CNT composites

Carbon nanotubes (CNTs) decorated with magnetite nanoparticles on their external surface have been fabricated by in situ solvothermal method, which was conducted in benzene at 500 °C with ferrocene and CNTs as starting reagents. The as-prepared composites were characterized using XRD, FTIR, SEM and TEM. It has been found that the amount of magnetite nanoparticles deposited on the CNTs can be controlled by adjusting the initial mass ratio of ferrocene to CNTs. The Fe₃O₄-CNT composites display good ferromagnetic property at room temperature, with a saturation magnetization value (M_s) of 32.5 emu g⁻¹ and a coercivity (H_c) of 110 Oe.     

Prediction of a domain-drag effect in uniaxial,non-compensated,ferromagnetic metals

An electric current is predicted to exert a dragging force on ferromagnetic domain walls. The effect arises from the non-uniform current distribution, recently predicted and observed at 4·2 K in the neighborhood of a wall in metals (Co, Ni) with large Hall angle. When the average current density j? exceeds a certain “coercive” value j?_c, the domains are set into motion in the same direction as the charge carriers. When j?j?_c, the wall speed approaches the drift speed of the carriers. Ohm's law fails when the walls move. The limits of very small and of very large Hall angle are both considered, using the single-wall model of Williams, Shockley and Kittel, and also the stratified-medium model of Herring. We assume B = M_s inside each domain; this is appropriate if the sample thickness t in the direction of the saturation magnetization M_s, and the wall spacing a, obey t > a. Materials with large anisotropy field H_A (h.c.p. Co, Gd) are necessary if the field H of the current is not to remove all walls normal to the current. For similar reasons, the sample should be in the shape of a flat ribbon (or rod) normal to M_s, of thickness (or diameter) t obeying t < dH_A/H_c, where H_c is the coercive field and d the wall length in the direction normal to the current and to M_s.     

Magnetic properties of CoFeP films prepared by electroless deposition

Structure and magnetization of CoFeP films prepared by the electroless deposition were systematically investigated by varying the bath composition and deposition parameters to optimize soft magnetic properties. The cobalt content in the CoFeP films varies from 40.4 to 94.9 wt% by controlling the bath composition. Increase of the metallic ratio FeSO₄·7H₂O/(CoSO₄·7H₂O+FeSO₄·7H₂O) affects the films’ microstructure, which switches from amorphous to crystalline structure. The magnetic properties of CoFeP films reveal that the coercivity (H_c) values range from 80 up to 185 A/m and the saturation magnetization (M_s) from 82 to 580 eum/g depending on the bath composition, deposition parameters and heat-treatment conditions. Increase of M_s and remanent magnetization (M_r) as well as decrease of H_c are observed for the CoFeP films with bath pH, temperature and the metallic molar ratio increasing. It is also found that the H_c is enhanced with the increase of NaH₂PO₂·H₂O concentration. CoFeP films showing good soft magnetic properties with coercivities less than 140 A/m and M_s close to 600 emu/g can be obtained in high pH bath and thereafter heat treatment. The deposit is found to be suitable as soft magnetic materials for core materials.     

Green function theory of Curie and order—order transitions in ferromagnetic systems

Dipolar critical temperatures in ferromagnetic systems with isotropic bilinear and biquadratic exchange are investigated by means of the Green function technique. Expressions are found for both the familiar Curie temperature, T_c, and the less well known order-order transition temperature, T_o, at which, under appropriate conditions, the magnetic ordering undergoes a change between fully aligned and canted ferromagnetism. At T = 0, a fully aligned state has <s_i^z = s for spin s and all lattice sites i, while a canted state has 〈s_i^z〉<s. It is shown independently of the Green function analysis that the T = 0 ground state is fully aligned if α, the ratio of biquadratic to bilinear exchange integrals, obeys ?[2s(s?1)]^?1<α< [2s²?2s+1]^?1. The region below the lower limit is identified as the range in which canted ferromagnetism can occur and is a range that does not appear to have been considered previously via the Green function formalism.The temperature dependence of the magnetic ordering is investigated by means of the double-time temperature-dependent Green function formalism. A new decoupling scheme is derived and used to reduce higher order Green functions to lowest order. It is found that a canted state, occuring at low temperatures, undergoes a transition to a fully aligned state at a temperature T₀ and subsequently becomes disordered at temperature T_c. Transitions to paramagnetism are found to be second order for α<α_c and first order for α?α_c where α_c is a critical value that depends on the atomic spin and weakly on the lattice structure. A phase diagram is given to illustrate the results, and a comparison is made with the corresponding results found in mean field theory.     

First order spin flop transition in yttrium iron garnet (YIG)

We have studied the field dependence of the sublattice magnetization of ferrimagnetic yttrium iron garnet (YIG) using neutron scattering. In contrast to the macroscopic spontaneous magnetization that shows the normal field dependence of a soft ferromagnet (sudden saturation at the demagnetization field and no hysteresis) in neutron scattering a field induced first order spin flop transition with considerable hysteresis is observed at a critical field of H_c∼580 G (external field). Considering that with neutron scattering the antiferromagnetic component of ∼4/5 of the total moment is detected preferentially while in the macroscopic magnetization samples the ferromagnetic component of ∼1/5 exclusively it becomes clear that ferromagnetic and antiferromagnetic component have a completely independent field (and temperature) dependence. This indicates that the two magnetic structures have to be viewed as two weakly coupled order parameters. In the zero field ground state the moment orientations of the two ordering structures are orthogonal. Only for fields H₀>H_c a nearly collinear ferrimagnetic order is established by the field.     

Synthesis of α-Fe2O3 nanobelts and nanoflakes by thermal oxidation and study to their magnetic properties

α-Fe₂O₃ nanobelts and nanoflakes have been successfully synthesized by oxidation of iron-coated ITO glass in air. The X-ray diffraction, Raman spectrum and scanning electron microscopy are carried out to characterize the nanobelts and nanoflakes. The formation mechanism has been presented. Significantly, the magnetic investigations show that the magnetic properties are strongly shape-dependent. The magnetization measurements of belt-like and flake-like α-Fe₂O₃ in perpendicular exhibit ferromagnetic feature with the coercivity (H_c) and saturation magnetization (M_s) of 334.5 Oe and 1.35 emu/g, 239.5 Oe and 0.12 emu/g, respectively. For the parallel, belt-like and flake-like α-Fe₂O₃ also exhibit ferromagnetic feature with the H_c and M_s of 205.5 Oe and 1.44 emu/g, 159.6 Oe and 0.15 emu/g, respectively.     

MAGNETIC PROPERTIES AND CRYSTALLIZATION OF THE RAPIDLY QUENCHED (Fe1-xNdx) 81.5B18.5 ALLOYS

Magnetic properties and crystallization behaviors of amorphous (Fe_1-xNd_x) _81.5B_18.5 alloys were studied. The crystallization temperature is found to rise at first and then drop monotonically with x, having a maximum value of 976K at x=0.11 (9at% Nd). The (Fe_1-xNd_x) _81.5B_18.5 alloys prepared at a quenching rate of v_s = 6.6m /s are amorphous, and exhibit good glass formability. Both the coercive field H_c and energy product (BH)_max depend strongly on Nd concentration. Amorphous (Fe_1-xNd_x) _81.5B_18.5 alloys with higher Nd concentration have a high coercive field at low temperature, due to the large random uniaxial anisotropy of Nd. The room-temperature H_c and (BH)_max obtained on optimal annealing con-ditions show two maxima as a function of Nd concentration x. The highest room-temperature coercive field H_c =22 kOe within the Nd concentrations around x=0.368 and the maximum energy product(RH)_max= 13.3 MG·Oe at x =0.055 are observed. The hard magnetic properties of these crystallized samples are related to the presence of the bard magnetic Nd₂Fe₁₄B phase.     

Microstructure evolution in the rapidly quenched Fe78Si9B13 ribbons

We report microstructure evolution in as-spun Fe₇₈Si₉B₁₃ ribbons under various wheel speeds (s), which was investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). With decreasing s, the volume fraction of the residual amorphous phase (V_a) in the as-spun ribbons decreases gradually, and the total exothermic heat of the crystallization in the DSC curves also decreases, but the ratio of the exothermic heat of the second crystallization to the first one is on the contrary. α-Fe is found in the ribbon with s of 32.9 m/s, while α-Fe, eutectic α-Fe+Fe₂B, and Fe₃Si phases are found in ribbons with s of 25.6 and 18.3 m/s. The phase precipitating behavior in cooling processes is well consistent with the annealing process in the literatures.