Magnetoresistance in La1−xCaxMnO3 (0≤x<0.4)

The magnetic and transport properties of La_1−xCa_xMnO₃ (0≤x<0.4) have been systematically studied. The magnetoresistance (MR) maximum appears at x=0.2-0.25 and the temperature dependence of MR for x>0.25 shows a much broader profile than that of samples for x=0.2-0.25. Based on a scenario in which there is a short-range charge ordering (CO) state coexisting in the ferromagnetic state matrix for x>0.25, and the least or even no short-range CO state exists in samples for x=0.2-0.25, the above observations can be understood.     

Reply to the comment on: ‘Magnetoresistance in La1−xCaxMnO3(0≤x<0.4)’

The author of the comment objects to the characterization and the interpretation of magnetoresistance (MR) effects observed by us in La_1−xCa_xMnO₃ (0≤x<0.4) samples. In this reply, arguments are used to show that the samples' characterization and explanation of the MR by considering the role of the short-charge ordering (CO) regions and magnetic domains are reasonable and acceptable.     

The effect of grain size on electrical transport and magnetic properties of La0.9Te0.1MnO3

The effect of grain size on structural, magnetic and transport properties in electron-doped manganites La_0.9Te_0.1MnO₃ has been investigated. All samples show a rhombohedral structure with the space group at room temperature. The Mn-O-Mn bond angle decreases and the Mn-O bond length increases with the increase of grain size. All samples undergo paramagnetic (PM)-ferromagnetic (FM) phase transitions and the interesting phenomenon that both magnetization and the Curie temperature T_C decrease with increasing grain size is observed, which is suggested to mainly originate from the increase of the Mn-O bond length d_Mn-O. Additionally, ρ obviously increases with decreasing grain size due to the increase of both the height and width of tunneling barriers with decreasing grain size. The results indicate that both the intrinsic colossal magnetoresistance and the extrinsic interfacial magnetoresistance can be effectively tuned in La_0.9Te_0.1MnO₃ by changing grain size.     

On the coexistence of spin and lattice polarons in the La0.67−xEuxCa0.33MnO3 CMR system

The electrical and magnetic transport properties of the La_0.67−xEu_xCa_0.33MnO₃ system exhibit lowering of insulator to metal and paramagnetic to ferromagnetic transition temperature (T_C) with the increase of Eu concentration in addition to possessing CMR property. The temperature variation of electrical resistivity and magnetic susceptibility for x=0.21 is found to have two distinct regions in the paramagnetic state for T>T_P; one with the localization of lattice polaron in the high-temperature region (T>1.5T_P) satisfying the dynamics of variable range hopping (VRH) model and the other being the combination of the spin and lattice polarons in the region T_P<T<1.5T_P. The resistivity variation with temperature and magnetic field, the cusp in the resistivity peak and CMR phenomenon are interpreted in terms of coexistence of spin and lattice small polarons in the intermediate region (T_P<T<1.5T_P). The spin polaron energy in the La_0.46Eu_0.21Ca_0.33MnO₃ system is estimated to be 106.73±0.90 meV and this energy decreases with the increase of external magnetic field. The MR ratio is maximal with a value of 99.99% around the transition temperature and this maximum persists till T→0 K, at the field of 8 T.     

Magneto-transport and ferromagnetic resonance studies of polycrystalline La0.6Pb0.4MnO3 thin films

To understand the nature of grain boundaries in polycrystalline materials, magneto-transport and ferromagnetic resonance measurement have been performed in polycrystalline La_0.6Pb_0.4MnO₃ (LPMO) thin films prepared by pulsed laser deposition. Films are found to undergo a semiconductor to metal transition at 230 K and re-enter into the semiconducting state below 130 K. Microwave absorption measurements carried out as function of applied field show two components of resonant absorption signal. First component is in accordance with ferromagnetic transition of grains at Curie temperature and the second component shows antiferromagnetic transition of grain boundaries at 160 K. An additional non-resonant absorption signal centered at zero field has also been observed that supports transition from conducting to insulating grain boundaries at ∼160 K. Further, temperature dependence of resistance in semiconducting state at low temperatures is in accordance with coulomb blockade model indicating insulating nature of AFM grain boundaries.     

Large magnetoresistance in low temperature metallic region of manganite compounds (La0.7−2xEux)(Ca0.3Srx)MnO3 (0.05≤x≤0.15)

Magnetoresistance (MR) and magnetization (dc and ac) measurements have been carried out on the manganites, (La_0.7−2xEu_x)(Ca_0.3Sr_x)MnO₃ (0.05≤x≤0.15), in the temperature range of 5-320 K. At 5 K, an unusually large MR of almost 98% is observed in the x=0.15 sample, nearly up to fields of 4-5 T. This large high-field MR occurs in the metallic region, far below the insulator-metal transition temperature, and does not vary linearly with applied field. The unusual magnetoresistance is explained in the light of various possibilities such as phase segregation, cluster spin-glass behavior, etc.     

The structure and magnetotransport properties of La2/3Sr1/3MnO3/Ba(La)TiO3 composites

The effect of Ba(La)TiO₃ doping on the structure and magnetotransport properties of La_2/3Sr_1/3MnO₃(LSMO)/xBa(La)TiO₃ (x=0.0, 1.0, 5.0 mol%) have been investigated. The X-ray diffraction patterns and microstructural analysis show that BaTiO₃ and LSMO phases exist independently in BaTiO₃-doped composites. The metal-insulator transition temperature (T_MI) decreases whereas the maximum resistivity increases very quickly by the increase of BaTiO₃ doping level. The partial substitution of Ba by La(0.35 mol%) results in a decrease in resistivity of LSMO/xBa(La)TiO₃ composites. Magnetoresistance of BaTiO₃-doped composites decreases monotonously in the temperature range 200-400 K in a magnetic field of 5 T, which is completely different from that of LSMO compound. The value of MR decreases at low field (H<1 T) and increases at high fields (H>1 T) with increasing the BaTiO₃ doping level at low temperatures below 280 K. These investigations reveal that the magnetotransport properties of LSMO/xBa(La)TiO₃ composites are dominated by spin-dependent scattering and tunneling effect at the LSMO/BaTiO₃/LSMO magnetic tunnel junction.     

Synthesis of magnetoresistive La0.7Sr0.3MnO3 nanoparticles by an improved chemical coprecipitation method

La_0.7Sr_0.3MnO₃ nanoparticles were prepared by a simple chemical coprecipitation route. Structural, magnetoresistance (MR), and magnetic properties were investigated. Rietveld refinement of X-ray powder diffraction result shows that the sample is single-phase with the space group of R3¯C. The result of field-emission scanning electronic microscopy shows that most of the grain sizes are distributed from 50 to 200 nm. The composition determined by energy-dispersive spectroscopy is the stoichiometry of La_0.7Sr_0.3MnO₃. The ferromagnetic to paramagnetic transition is sharp with Curie temperature T_C=367 K, which further confirms that the sample is single-phase. The steep change in MR at low fields is attributed to the alignment of the magnetization, while the high-field MR is due to the grain boundary effect.     

Magnetic properties and charge ordering in Pr0.75Na0.25MnO3 manganite

The structural and magnetic properties of Pr_0.75Na_0.25MnO₃ have been investigated experimentally. At room temperature, the compound shows paramagnetic characteristic. Along with decreasing temperature, a peak appears in the magnetization versus temperature curve around 220 K. To clarify whether this peak is associated with the ordering arrangement of Mn³⁺ and Mn⁴⁺ ions, electron diffraction experiments were carried out below and above 220 K respectively. Only basic Brag diffraction spots can be observed at high temperatures, however, superlattice diffraction appears below 220 K. This provides direct evidence for the existence of charge ordering in Pr_0.75Na_0.25MnO₃. We find the Mn³⁺ and Mn⁴⁺ cations form zigzag chains in a-c plane by analyzing the diffraction patterns. Combining with the magnetization measurements and the results of electron spin resonance, we confirm the antiferromagnetic phase and ferromagnetic component coexist in Pr_0.75Na_0.25MnO₃ below 120 K.     

Large magnetoresistance induced by surface ferromagnetism in A-type antiferromagnetic La0.4Sr0.6MnO3 nanoparticles

Grain size effects on magnetic and transport properties for heavily Sr-doped A-type antiferromagnetic La_0.4Sr_0.6MnO₃ ceramics were studied. It was observed that with decrease in grain size, surface ferromagnetism could be introduced due to bond-breaking at surfaces. With decrease in grain size, the surface ferromagnetism was enhanced, and the phase transition order distinguished from the Arrott plot was a second one. The surface-induced ferromagnetism was insulating as judged from transport properties. With decrease in grain size, magnetoresistance was largely improved for both high magnetic and low magnetic fields. Under a 500 Oe magnetic field, the magnetoresistance is improved from 0.2%, 0.1%, 0.03% and 0.02% for the sample with grain size of 150 nm at 10, 100, 200 and 300 K, respectively, to 3%, 2.3%, 0.43% and 0.12% for the sample with grain size of 20 nm at 10, 100, 200 and 300 K. It was interesting to find that large magnetoresistance could be induced due to the surface ferromagnetism in A-type antiferromagnetic La_0.4Sr_0.6MnO₃ nanoparticles, which suggested that it was possible to search for manganites with relatively high low-field magnetoresistance in nanostructured A-type antiferromagnetic materials.     

Highly cation-deficient manganese perovskite, La1−xMn1−yO3 with x=y

Oxidative (δ>0) nonstoichiometry in the perovskite ‘LaMnO_3+δ’ has been known to be manifested not with O interstitials but rather with cation vacancies of equal amounts at the two cation sites, La and Mn, i.e. La_1−xMn_1−yO₃ with x=y. Here, we report the fabrication of samples with record-high cation-vacancy concentrations (x>0.12 or δ>0.4) by means of a variety of high-pressure oxygenation techniques. Linear (negative) dependence of the cell volume on x was observed within the whole x range investigated, down to 56.9 Å³ (per formula unit) for a sample oxygenated at 5 GPa and 1100 °C using Ag₂O₂ as an excess oxygen source. With increasing degree of cation deficiency in La_1−xMn_1−xO₃, the ferromagnetic transition temperature was found to follow a bell shape with respect to x exhibiting a maximum of ∼250 K about x≈0.1. For moderately oxygenated samples large magnetoresistance effect was evidenced.     

Low-field transport properties of (1−x)La0.7Ca0.2 Sr0.1MnO3+x(ZnO) composites

Composite samples (1−x)La_0.7Ca_0.2Sr_0.1MnO₃(LCSMO)+x(ZnO) with different ZnO doping levels x have been investigated systematically. The structure and morphology of the composites have been studied by the X-ray diffraction (XRD) and scanning electronic microscopy (SEM). The XRD and SEM results indicate that no reaction occurs between LCSMO and ZnO grains, and that ZnO segregates mostly at the grain boundaries of LCSMO. The magnetic properties reveal that the ferromagnetic order of LCSMO is weakened by addition of ZnO. The results also show that ZnO has a direct effect on the resistance of LCSMO/ZnO composites, especially on the low-temperature resistance. With increase of the ZnO doping level, T_P shifts to a lower temperature and the resistance increases. It is interesting to note that an enhanced magnetoresisitance (MR) effect for the composites is found over a wide temperature range from low temperature to room temperature in an applied magnetic field of 3 kOe. The maximum MR appears at x=0.1. The low field magnetoresistance (LFMR) results from spin-polarized tunneling. However, around room temperature, the enhanced MR of the composites is caused by magnetic disorder.     

Correlation between extrinsic magnetoresistance and electroresistance in La0.6Pb0.4MnO3 thin films as revealed from current-voltage and ferromagnetic resonance studies

We have investigated magnetoresistance (MR) and electroresistance (ER) of well characterized La_0.6Pb_0.4MnO₃ (LPMO) films having two different crystallinity (i) (00l) oriented single-crystalline, SC, i.e. without any grain boundaries, and (ii) nanocrystalline, NC, with an average grain size of 17 nm. Both MR and ER were remarkably different for the two films, that is, (i) NC films exhibited a highest MR of ∼100% near the metal-insulator transition temperature; while for SC films the MR was in the range of 40-60%, (ii) NC films exhibited a finite ER, which increased monotonically with decreasing temperature; while in SC films ER was completely absent. Using current-voltage characteristic and ferromagnetic resonance studies we demonstrate that both enhanced MR and ER in NC films are extrinsic in nature and originate due to the presence of spin glassy grain boundaries.     

Room temperature magnetoresistance in Ln2/3A1/3MnO3 manganites

The investigation of the manganites La_2/3−xPr_xSr_1/3MnO₃, La_2/3Sr_1/3−xCa_xMnO₃ and La_2/3+xCa_1/3−2xAg_xMnO₃, which all exhibit Mn³⁺:Mn⁴⁺=2, shows that it is possible to reach high magnetoresistance at room temperature, up to 21% under 1.2 T. These materials are compared to La_5/6Ag_1/6MnO₃ which corresponds to the same Mn³⁺:Mn⁴⁺ ratio and exhibits a magnetoresistance of 25% in this field. An interesting feature deals with the value of the insulator-metal transition temperature T_IM, often higher than T_C, especially for Ag-based compounds. It is suggested that the latter results either from a better oxygenation of the surface of the grains or from a migration of silver toward the surface.     

Synthesis, structural and transport properties of nanocrystalline La1−xBaxMnO3 (0.0≤x≤0.3) powders

Nanocrystalline La_1−xBa_xMnO₃ (0.0≤x≤0.3) manganites have been prepared by a simple and instantaneous solution combustion method, which is a low temperature initiated synthetic route to obtain fine-grained powders with relatively high surface area. The phase purity and crystal structure of the combustion products are carried out by powder X-ray diffraction. The as-made nanopowders are in cubic phase. On calcination to 900 °C, barium doped manganites retain cubic phase, whereas barium free manganite transformed to rhombohedral phase. The scanning electron microscope (SEM) results revealed that the combustion-derived compounds are agglomerated with fine primary particles. The doped manganites have surface area in the range 24-44 m²/g. The surface area of the manganites increases with barium content, whereas it decreases on calcination. Both undoped and doped lanthanum manganites show two active IR vibrational modes at 400 and 600 cm⁻¹. The low temperature resistivity measurements have been carried out by four-probe method down to 77 K. All the samples exhibit metal-insulator behaviour and metal-insulator transition temperature (T_M-I) in the range 184-228 K and it is interesting to note that, as the barium content increases the T_M-I shifts to lower temperature side. The maximum T_M-I of 228 K is observed for La_0.9Ba_0.1MnO₃ sample.     

Emission Mössbauer studies of the magnetoresistive compound, La0.7Sr0.3MnO3

The magnetic behavior of the Sr_0.3 manganite is studied using a local microprobe, ⁵⁷Co. In contrast with Ca substituted manganites, a much larger fraction of the material exhibits short-range order with superparamagnetic-like behavior even at 80 K. The differences in behavior are attributed to the large mismatch between the ionic radii of La⁺³ and the divalent substituent Sr⁺², which introduces anharmonicity in local vibrations. In common with all other compounds exhibiting negative bulk magnetoresistivity, the Sr_0.3 compound also exhibits very marked softening of lattice as one approaches T_c from below. Application of an external magnetic field results in coalescing of nanosized magnetic clusters to form larger ones with better alignment of spins.     

Investigation of the electrical and magnetic properties of electron-doped Ruddlesden-Popper phases, CaO(Pr0.08Ca0.92MnO3)n (n=1, 2, 3 and ∞)

The electrical and magnetic properties of Pr^3±-doped Ruddlesden-Popper manganates with the formula, CaO(Pr_0.08Ca_0.92MnO₃)_n (n=1,2,3 and ∞) have been investigated. The electrical conductivity of the samples increases with the number of perovksite slabs sandwiched between the rock-salt-like CaO layers. Magnetic susceptibility measurements show an anomalous behavior for the n=1 composition which is attributed to the near absence of ferromagnetic correlations in a two-dimensional system. The magnetic behavior of other members can, however, be understood on the basis of a ‘ferromagnetic-droplet’ model. Since the number of electrons per perovskite slab is invariant across the series, the electronic properties are readily correlated to the phase space available for exchange interactions.     

Electron spin resonance study of bulk and nanosized La0.875Sr0.125MnO3

The structural, transport and electron spin resonance properties of bulk and nanosized La_0.875Sr_0.125MnO₃ prepared by a sol-gel method have been investigated. The bulk sample has an orthorhombic structure and a ferromagnetic insulating ground state. The ESR spectra indicate the coexistence of the ferromagnetic insulating and ferromagnetic metallic phases below T_C. In addition to a sharp peak in the vicinity of T_C, another sharp peak close to is clearly observed in the intensity of the spectra, which may be correlated with the structural transition and orbital ordering at this temperature. For the nanosized sample, a drastically different behavior is found. With a rhombohedral structure down to 70 K, the nanosized sample shows a ferromagnetic metallic ground state. The ESR studies reveal the coexistence of the paramagnetic and ferromagnetic resonance signals. The resonance intensity shows a broad peak around 200 K, which may be due to the wide ferromagnetic transition in the nanoparticle.     

Effect of magnetic film thickness on rectifying properties of La0.8Sr0.2MnO3/TiO2 heterostructures

The La_0.8Sr_0.2MnO₃ (LSMO)/ TiO₂ heterostructures with different thicknesses of the LSMO films were successfully synthesized using the RF magnetron sputtering technique. Excellent rectifying characteristics are presented in all heterostructures in a wide temperature range. The differences of the diffusive potentials for three heterojunctions are very little at 300 K. The samples exhibit a high resistance that plays an important role on their rectifying properties. The diffusive potential decreases with increasing temperature. The result is attributed to both the reduction of the thickness of the deletion layer due to the thermal diffusion and the modulation of the interfacial electronic structure of the heterostructures. The metal-insulator (M-I) transition is observed clearly from the single LSMO layers and the LSMO/ TiO₂ p-n heterojunctions.