Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

Magnetism due to oxygen vacancies and/or defects in undoped semiconducting and insulating oxide thin films

Room temperature ferromagnetism was observed in HfO₂, TiO₂, and In₂O₃ films grown on yttrium-stabilized zirconia, LaAlO₃, and MgO substrates, respectively. While the magnetic moment is rather modest in the case of In₂O₃ films, it is very large in the other two cases. Thin film form, which might create necessary defects and/or oxygen vacancies, must be the main reason for undoped semiconducting and insulating oxides to become ferromagnetic. From the results, a serious question arises if a transition-metal doping indeed plays any essential role in producing ferromagnetism (FM) in non-magnetic oxides.     

The role of the dopant in the magnetism of Fe-doped SnO2 films

Transparent pure and Fe-doped SnO₂ thin films were grown by pulsed laser deposition technique on LaAlO₃ substrates. X-ray diffraction shows that the films are polycrystalline and have the rutile structure. Surprisingly, the pure film presents magnetic-like behavior at room temperature with a saturated magnetization of almost one-third of the doped film (∼3.6 and 11.3 emu/g, respectively) and its magnetization could not be attributed to any impurity phase. Taking into account the magnetic moment measured in the pure film, the effective contribution of the impurity in the doped one can be inferred to be ∼2 μ_B per Fe atom. A large magnetic moment was also predicted by an ab initio calculation in the doped system, which increases if an oxygen vacancy is present near the Fe impurity.     

Magnetism in spin-coated pristine TiO2 thin films

Spin coated pristine TiO₂ thin films show magnetic behaviors that are similar to those of pulsed laser ablated TiO₂ thin films that were reported previously. It seems that in this kind of material, ferromagnetism (FM) is indeed intrinsic, and it can be achieved by various deposition techniques. The fact that oxygen annealing degrades the magnetic moment implies that the observed magnetism is likely due to defects or/and oxygen vacancies. Moreover, thick films that were deposited under the same growth conditions have the magnetic ordering degraded enormously. It is found that as for FM in undoped TiO₂ films made by the chemical solution deposition, not only do defects/oxygen vacancies play a role, but also the confinement effects seem to be important.     

A study of room-temperature ferromagnetism in transition metal and fluorine-doped spray-pyrolyzed SnO2 thin films

Room-temperature ferromagnetism has been observed in Co- or Mn-doped SnO₂ and Co- and F-co-doped SnO₂ thin films. A maximum magnetic moment of 0.80μ_B/Co ion has been observed for Sn_0.90Co_0.10O_1.925−δF_0.075 thin films, whereas in the case of Sn_1−xMn_xO_2−δ it was 0.18μ_B/Mn ion for x=0.10. The magnetization of both Sn_1−xCo_xO_2−δ and Sn_1−xCo_xO_2−y−δF_y thin films depends on the free carrier concentration. An anomalous Hall effect has been observed in the case of Co-doped SnO₂ films. However, the same was not observed in the case of Mn-doped SnO₂ thin films. Carrier-mediated interaction is convincingly proved to be the cause of ferromagnetism in the case of Co:SnO₂. It is, however, proposed that no carrier-mediated interaction exists in the case of Mn:SnO₂. Present studies indicate that dopants and hence electronic cloud-lattice interaction plays an important role in inducing ferromagnetism.     

On the origin of ferromagnetism in semiconducting TiO2−δ:Co oxide

In Co-doped TiO_2?δ oxide films deposited on SrTiO₃(100) substrates, a room-temperature ferromagnetism is found to occur only in a limited charge-carrier concentration interval from 2×10¹⁸? 5×10²² cm^?3. This indirectly testifies that ferromagnetism in the aforementioned n-type semiconductor is associated with the exchange interaction of magnetic ions via conduction electrons rather than with the formation of Co clusters in the material. The magnetic moment per Co atom is 0.8μ_B in the TiO cubic phase and 0.5μ_B in the anatase tetragonal phase of TiO₂.     

Magnetism of single-walled silicon carbide nanotubes doped by boron,nitrogen and oxygen

We calculated, using spin polarized density functional theory, the electronic properties of zigzag (10,0) and armchair (6,6) semiconductor silicon carbide nanotubes (SiCNTs) doped once at the time with boron, nitrogen, and oxygen. We have looked at the two possible scenarios where the guest atom X (B, N, O), replaces the silicon X_Si, or the carbon atom X_C, in the unit cell. We found that in the case of one atom B @ SiCNT replacing a carbon atom position annotated by B_C exhibits a magnetic moment of 1 μ_B/cell in both zigzag and armchair nanotubes. Also, B replacing Si, (B_Si), induce a magnetic moment of 0.46 μ_B/cell in the zigzag (10,0) but no magnetic moment in armchair (6,6). For N substitution; (N_C) and (N_Si) each case induce a magnetic moment of 1 μ_B/cell in armchair (6,6), while N_Si give rise to 0.75 μ_B/cell in zigzag (10,0) and no magnetic moment for N_C. In contrast the case of O_C and O_Si did not produce any net magnetic moment in both zigzag and armchair geometries.     

Room temperature ferromagnetism behavior of Sn1−xMnxO2 powders

In this paper, we have investigated Mn-doped SnO₂ powder samples prepared by solid-state reaction method. X-ray diffraction showed a single phase polycrystalline rutile structure. The atomic content of Mn ranged from ∼0.8 to 5 at%. Room temperature M-H loops showed a ferromagnetic behavior for all samples. The ferromagnetic Sn_0.987Mn_0.013O₂ showed a coercivity H_c=545 Oe, which is among the highest reported for dilute magnetic semiconductors. The magnetic moment per Mn atom was estimated to be about 2.54 μ_B of the Sn_0.9921Mn_0.0079O₂ sample. The average magnetic moment per Mn atom sharply decreases with increasing Mn content, while the effective fraction of the Mn ions contributing to the magnetization decreases. The magnetic properties of the Sn_1−xMn_xO₂ are discussed based on the competition between the antiferromagnetic superexchange coupling and the F-center exchange coupling mechanism, in which both oxygen vacancies and magnetic ions are involved.     

In2O3/SnO2薄膜的制备及光谱反射性能研究

开展了在伪装网基布上镀In₂O₃/SnO₂薄膜的性能研究,系统分析了薄膜厚度对其光谱反射性能的影响;总结了薄膜厚度对In₂O₃/SnO₂薄膜表面形貌、光谱反射辐射性能的影响规律,为In₂O₃/SnO₂薄膜的红外伪装应用奠定了基础理论和实验依据. 关键词： 2O₃/SnO₂薄膜')" href="#">In₂O₃/SnO₂薄膜 红外反射特性 红外发射率 可见光—近红外透过率     

Synthesis and characterization of room-temperature ferromagnetism in Fe- and Ni-co-doped In2O3

Observation of room-temperature ferromagnetism in Fe- and Ni-co-doped In₂O₃ samples (In_0.9Fe_0.1−xNi_x)₂O₃ (0?x?0.1) prepared by citric acid sol-gel auto-igniting method is reported. All of the samples with intermediate x values are ferromagnetic at room-temperature. The highest saturation magnetization (0.453 μ_B/Fe+Ni ions) moment is reached in the sample with x=0.04. The highest solubility of Fe and Ni ions in the In₂O₃ lattice is around 10 and 4 at%, respectively. The 10 at% Fe-doped sample is found to be weakly ferromagnetic, while the 10 at% Ni-doped sample is paramagnetic. Extensive structure including Extended X-ray absorption fine structure (EXAFS), magnetic and magneto-transport including Hall effects studies on the samples indicate the observed ferromagnetism is intrinsic rather than from the secondary impurity phases.     

Investigation of structure and magnetic characteristics of Ni-implanted AlGaN films

The structural, valence of elements and magnetic characteristics of Ni-implanted Al_0.5Ga_0.5N films, deposited on Al₂O₃ substrates by metalorganic chemical vapor deposition (MOCVD), were reported. Ni ions were implanted into Al_0.5Ga_0.5N films by Metal Vapor Arc (MEVVA) sources under the energy of 100 keV for 3 h. The films were annealed at 900 K in the furnace for the transference of Ni ions from interstitial sites to substitutional sites in AlGaN and activating the Ni³⁺ ions. Characterizations were carried out in situ using X-ray diffraction (XRD), X-ray photoemission spectroscopy (XPS) and Vibrating sample magnetometer (VSM), indicating that the films have wurtzite structure without forming a secondary phase after annealing. Ni ions were successfully implanted into substitutional sites of Al_0.5Ga_0.5N films and the chemical bonding states of Ni³⁺ is Ni–N. The apparent hysteresis loops prove the films exhibited ferromagnetism at 300 K. The room temperature (RT) M_s and H_c obtained were approximately 0.22 emu/g and 32.97 Oe, respectively. From the first-principles calculation, A total magnetic moment of 2.86 μB per supercell is calculated: the local magnetic moment of NiN₄ tetrahedron, 2.38 μB, makes the primary contribution. The doped Ni atom hybridizes with its four nearby N atoms in NiN₄ tetrahedron, then N atoms are spin polarized and couple with Ni atom with strong magnetization, which result in ferromagnetism. Therefore, the p-d exchange mechanism is responsible for ferromagnetism in Ni-doped AlGaN. It is expected that the room temperature ferromagnetic Ni-doped Al_0.5Ga_0.5N films can make it possible to the applications for the spin electric devices.     

Ferromagnetism in laser ablated ZnO and Mn-doped ZnO thin films: A comparative study from magnetization and Hall effect measurements

Room temperature FM was observed in pristine ZnO thin films grown by pulsed laser deposition on Al₂O₃ substrates. It seems to originate from other defects but not oxygen vacancies. Magnetization of thinner films is much larger than that of the thicker films, indicating that defects are mostly located at the surface and/or the interface between the film and the substrate. Data on the Fe:ZnO and Mn:ZnO films show that a transition-metal doping does not play any essential role in introducing the magnetism into ZnO. In the case of Mn doping, the magnetic moment could be very slightly enhanced. Hall effect measurements reveal that an incorporation of Mn does not change the carrier type, but decreases the carrier concentration, and increases the Hall mobility, resulting in more resistive Mn:ZnO films. Since no anomalous Hall effect was observed, it is understood that the observed FM is not due to the interaction between the free-carrier and the Mn impurity.     

CdTe太阳电池前电极SnO2:F/SnO2复合薄膜性能分析

减薄CdS窗口层是提高CdS/CdTe太阳电池转换效率的有效途径之一,减薄窗口层会对器件造成不利的影响,因此在减薄了的窗口层与前电极之间引入过渡层非常必要.利用反应磁控溅射法在前电极SnO₂:F薄膜衬底上制备未掺杂的SnO₂薄膜形成过渡层,并将其在N₂/O₂=4 ∶1,550 ℃环境进行了30 min热处理,利用原子力显微镜、X射线衍射仪、紫外分光光度计对复合薄膜热处理前后的形貌、结构、光学性能进行了表征,同时分析了复     

Magnetoelectric properties of Mn-substituted BiFeO3 thin films with a TiO2 barrier

Multiferroic thin films with the general formula TiO₂/BiFe_1−xMn_xO₃ (x=0.00, 0.05, 0.10 and 0.15) (TiO₂/BFMO) were synthesized on Au/Ti/SiO₂/Si substrates using a chemical solution deposition (CSD) method assisted with magnetron sputtering. X-ray diffraction analysis shows the thin films contained perovskite structures with random orientations. Compared with BFMO films, the leakage current density of the TiO₂/BFMO thin films was found to be lower by nearly two orders of magnitude, and the remnant polarizations were increased by nearly ten times. The enhanced ferroelectric properties may be attributed to the lower leakage current caused by the introduction of the TiO₂ layer. The J-E characteristics indicated that the main conduction mechanism for the TiO₂/BFMO thin film was trap-free Ohmic conduction over a wide range of electric fields (0-500 kV/cm). In addition, ferromagnetism was observed in the Mn doped BFO thin films at room temperature. The origin of ferromagnetism is related to the competition between distortion of structure and decrease of grain size and decreasing net magnetic moment in films due to Mn doping.     

EFFECT OF ZnFe22O4 DOPING ON THE OPTICAL PROPERTIES OF TiO2 THIN FILMS

Amorphous TiO₂ thin films and ZnFe₂O₄ doped TiO₂ composite films were deposited by radio frequency magnetron sputtering. The effect of ZnFe₂O₄ doping on the optical properties of TiO₂ thin films was reported. Our results show that the absorption edge of TiO₂ thin films and composite films exhibits a blue shift with decreasing annealing temperature. The absorption edge of composite films has moved to visible spectrum range, and a very large red shift occurs in comparison with TiO₂ thin film. An enhanced photoluminescence in ZnFe₂O₄ doped anatase TiO₂ thin film at room temperature.     

Electronic and magnetic properties of Mn-doped WSe2 monolayer under strain

Electronic and magnetic properties of Mn-doped WSe₂ monolyer subject to isotropic strain are investigated using the first-principles methods based on the density functional theory. Our results indicate that Mn-doped WSe₂ monolayer is a magnetic semiconductor nanomaterial with strong spontaneous magnetism without strain and the total magnetic moment of Mn-doped system is 1.038μ_B. We applied strain to Mn-doped WSe₂ monolayer from -10% to 10%. The doped system transforms from magnetic semiconductor to half-metallic material from −10% to −2% compressive strain and from 2% to 6% tensile strain. The largest half-metallic gap is 0.450 eV at −2% compressive strain. The doped system shows metal property from 7% to 10%. Its maximum magnetic moment comes to 1.181μ_B at 6% tensile strain. However, the magnetic moment of system decreases to zero sharply when tensile strain arrived at 7%. Strain changes the redistribution of charges and arises to the magnetic effect. The coupling between the 3d orbital of Mn atom, 5d orbital of W atom and 4p orbital of Se atom is analyzed to explain the strong strain effect on the magnetic properties. Our studies predict Mn-doped WSe₂ monolayers under strain to be candidates for thin dilute magnetic semiconductors, which is important for application in semiconductor spintronics.     

The influence of interfacial barrier engineering on the resistance switching of In2O3：SnO2/TiO2/In2O3：SnO2 device

The I-V characteristics of In2O3：SnO2/TiO2/In2O3：SnO2 junctions with different interracial barriers are inves- tigated by comparing experiments. A two-step resistance switching process is found for samples with two interfacial barriers produced by specific thermal treatment on the interfaces. The nonsynchronous occurrence of conducting filament formation through the oxide bulk and the reduction in the interracial barrier due to the migration of oxygen vacancies under the electric field is supposed to explain the two-step resistive switching process. The unique switching properties of the device, based on interracial barrier engineering, could be exploited for novel applications in nonvolatile memory devices.     

First principles study of the magnetism driven by cation defects in CeO2: the important role of O2p states

The magnetism driven by cation defects in undoped CeO2 bulk and thin films is studied by the density functional theory corrected for on-site Coulomb interactions （DFT＋U） with U = 5 eV for the Ce4f states and U = 7 eV for the O2p states. It is found that the Ce vacancies can induce a magnetic moment of the -4 gB/supercell, which arises mainly from the 2p hole state of the nearest neighbouring O atom （-1μB on per oxygen） to the Ce vacancy. The effect of the methodology is investigated, indicating that U = 7 eV for the O2p state is necessary to obtain the localized O2p hole state in defective ceria with cation vacancies.     

超薄Fe(4?)膜磁特性极化中子反射研究

Ultrathin Fe film 200  V/4  Fe/900  V/MgO（100） has been prepared by molecular beam epitaxy （MBE）. The structure parameters, such as the surface and interface roughness and the thickness of each layer, were obtained by X-ray and neutron reflectivity mea 关键词： 超薄Fe膜 磁特性 极化中子反射 分子束外延