大孔吸附树脂处理含磺胺废水的研究

利用大孔吸附树脂处理含磺胺废水。实验表明，DRHⅢ树脂对磺胺具有良好的吸附－解吸效果。原废水中磺胺浓度约为17.2g/L,COD约为13750mg/L，经树脂吸附处理后，废水中COD去除率约86％，磺胺的吸附率88．2％，树脂的解吸率为97．5％，磺胺的回收率约86．0％，其纯度达99．8％。在废水有效处理的同时实现了废物资源化，具有良好的环境效益和较高的经济效益。     

大孔树脂吸附苯肼的静态相平衡研究

比较3种了大孔吸附树脂对废水中苯肼的吸附能力，证明Hz-841大孔树脂的吸附效果最佳．根据实验建立了Hz-841大孔树脂静态吸附容量与温度、苯肼浓度、以及离子强度间的相平衡关系．     

大孔树脂吸附法处理模拟邻苯二酚生产废水的研究

本文采用ＮＫＡ－２大孔径树脂吸附法处理模拟邻苯二酚废水,室温下以６ＢＶ／ｈ流速吸附便能达到国家的排放标准。废水中酚的含量≤５．０ｍｇ／Ｌ;系统地研究了温度、流速、废水ｐＨ值等因素对树脂吸附性能的影响;提出分析废水中邻苯二酚含量的高效液相色谱（ＨＰＬＣ）法。     

大孔树脂对大豆乳清废水中异黄酮的吸附特性研究

通过比较10种大孔吸附树脂对大豆乳清中异黄酮的吸附特性发现，弱极性和非极性吸附树脂有利于大豆乳清中异黄酮的吸附．研究结果表明，D312和AB-8树脂对异黄酮的吸附量大，解吸容易、可以应用于大豆乳清废水资源化工艺之中．适宜的操作条件为温度20℃左右、pH值7．5左右．     

大孔吸附树脂的吸附机理

大孔吸附树脂(macroprous adsorption resin, MAR)是近几十年发展起来的一种具有多孔立体结构、人工合成的有机高分子聚合物。由于其特殊的理化性质和吸附性能,已被广泛应用于化学、医药、环保和食品等领域。本文介绍了近年来国内外对大孔吸附树脂在吸附机理研究方面的进展,重点介绍了不同温度条件下大孔吸附树脂对靶标分子的吸附热力学行为模式,靶标分子在大孔吸附树脂表面及孔内的吸附扩散行为模式。此外,大孔吸附树脂性能参数和靶标分子结构参数之间构效关系也对其吸附选择性规律具有重要的影响。因此,大孔吸附树脂与底物间构效关系的匹配程度及其对选择性的影响是大孔吸附树脂分离理论研究的核心。本文最后介绍了可以准确客观描述吸附过程并具有一定使用范围的大孔吸附树脂吸附模型的建立和评价。     

大孔吸附树脂技术应用于复方中成药制备工艺的研究

本文报告了用非极性大孔吸附树脂法从复方中药中提取分离有效成分的研究。结果表明，正确地选择大孔吸附树脂及吸附和解吸条件，可得到高纯度的有效组分，其粘度低，有利于制剂。     

大孔树脂对对硝基苯胺的吸附行为及其应用研究

研究了溶液中无机盐、pH值对氨基修饰超高交联大孔树脂NDA-99、氧修饰超高交联大孔树脂NDA-150和大孔树脂XAD-4吸附对硝基苯胺的影响。结果表明,无机盐对吸附影响不大;NDA-99、NDA-150在中性范围吸附量最大,XAD-4的吸附量随pH增大而增大;3种树脂的吸附等温线都能很好的利用Freundlich方程进行拟合,吸附皆为放热反应且为优惠吸附;3种树脂的饱和吸附量大小依次为NDA-150>NDA-99>XAD-4。依据上述结论,采用NDA-150处理对硝基苯胺生产母液废水,每批次处理量为40BV,废水中对硝基苯胺浓度由2130mg/L降至9.6mg/L,去除率达99.5%,吸附后的树脂采用95%的乙醇可完全再生,高浓度对硝基苯胺乙醇再生溶液经蒸馏可回收对硝基苯胺和脱附剂,实现了废水治理与资源化的统一。     

大孔吸附树脂对大豆皂苷的吸附研究

比较了5种大孔吸附树脂对大豆皂苷的吸附等温线、吸附容量、解吸率和吸附动力学。发现ZTC-1树脂对大豆皂苷吸附量大、解吸容易、吸附速度快，是一种良好的大豆皂苷吸附荆，AB-8树脂次之．选择ZTC-l树脂纯化大豆皂苷粗提液，得到大豆皂苷产品纯度为78．2％(干物质)，回收率为93．1％．     

大孔树脂吸附法处理含苯肼工业废水的研究

以Hz-841大孔树脂为吸附剂,95%乙醇为脱附剂处理含苯肼4000~5000mg/L的工业废水,取得了理想的分离效果,苯肼吸附率>99.8%,树脂工作吸附量40~50g/L。     

用大孔吸附树脂分离利血平

以利血平的吸附量和解吸率为指标,筛选大孔吸附树脂.研究吸附和解吸的优化条件,并考察选定树脂的吸附等温线、吸附动力学、吸附和解吸性能.结果表明,将催吐萝芙木根粉浸提液蒸去乙醇且不调pH(pH 1)进行吸附,HZ-818型大孔吸附树脂对利血平的吸附量可达到9.34mg/mL.使用工业乙醇-水(80:20,pH 1.0)为解吸剂,解吸率可达99.3%.该树脂的吸附符合Langmuir吸附等温方程.吸附前期,吸附速度较快,以后速度减慢.HZ-818型树脂对利血平的吸附量大,解吸率高,通过大孔树脂吸附和解吸,利血平浓度提高50倍以上,适宜于工业化生产.     

Preparation of porous/hollow particles of phenolic resin

Porous/hollow polymer microparticles were prepared by suspension polymerization from a resol, water‐soluble phenolic resin in a multiple emulsion system oil‐in‐water‐in‐oil(O/W/O). The porous/hollow structures of phenolic resin microparticle were characterized by optical microscopy (OM) and scanning electron microscopy (SEM). It is shown that the porous/hollow structure is related to a dispersion and curing process of the resol resin. It was indicated that it is low‐cost and simple to prepare porous/hollow phenolic resin micr‐particles from resol in an O/W/O system. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation method of porous polymer materials by radiation technique and its application

The radiation polymerization of hydrophilic hydroxyethyl methacrylate monomer solution at temperatures below 0 °C leads to the formation of a porous structure in the polymers. The melting peak of the eutectic water–monomer composition at the eutectic point (above ?24 °C) could be distingushed and a glass transition temperature was observed at ?96 °C. The porous structure was developed after melting small ice pieces in the polymers after polymerization. The porous structure formed above 0 °C contained discontinuous pores and that formed below 0 °C had continuous pores leading to reticular structure. In a mixture of water –dioxane –monomer, the pore diameter decreased with increasing monomer concentration. Replacing dioxane with decane led to a maximum pore diameter at 70% monomer concentration. The pore diameter in 70% monomer concentration using water and dioxane was 1～4 µm, maximum activity in immobilized enzyme tablets was observed at this diameter. The porous structure was also varied by controlling the polymerization temperature. The durability of the immobilized enzyme tablets was demonstrated by the retention of high enzyme activities after repeated batch enzyme reactions. Copyright © 2001 John Wiley & Sons, Ltd.     

Phase separation,porous structure,and cure kinetics in aliphatic epoxy resin containing hyperbranched polyester

Thermosetting blends of an aliphatic epoxy resin and a hydroxyl‐functionalized hyperbranched polymer (HBP), aliphatic hyperbranched polyester Boltorn H40, were prepared using 4,4′‐diaminodiphenylmethane (DDM) as the curing agent. The phase behavior and morphology of the DDM‐cured epoxy/HBP blends with HBP content up to 40 wt % were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The cured epoxy/HBP blends are immiscible and exhibit two separate glass transitions, as revealed by DMA. The SEM observation showed that there exist two phases in the cured blends, which is an epoxy‐rich phase and an HBP‐rich phase, which is responsible for the two separate glass transitions. The phase morphology was observed to be dependent on the blend composition. For the blends with HBP content up to 10 wt %, discrete HBP domains are dispersed in the continuous cured epoxy matrix, whereas the cured blend with 40 wt % HBP exhibits a combined morphology of connected globules and bicontinuous phase structure. Porous epoxy thermosets with continuous open structures on the order of 100–300 nm were formed after the HBP‐rich phase was extracted with solvent from the cured blend with 40 wt % HBP. The DSC study showed that the curing rate is not obviously affected in the epoxy/HBP blends with HBP content up to 40 wt %. The activation energy values obtained are not remarkably changed in the blends; the addition of HBP to epoxy resin thus does not change the mechanism of cure reaction of epoxy resin with DDM. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 889–899, 2006     

大孔吸附树脂提取银杏黄酮

银杏叶;黄酮类化合物;大孔吸附树脂提取银杏黄酮     

Preparation of MBHA resin by benzotriazole-mediated amidoalkylation

MBHA (4-methylbenzhydrylamine) resin is widely used as a solid support for the synthesis of carboxamides or peptide C-terminal amides. Herein, we report a new method for synthesizing MBHA resin by benzotriazole-mediated amidoalkylation. MBHA resin was efficiently prepared with N-[(benzotriazol-1-yl)(p-tolyl)methyl]formamide or N-[formamido(p-tolyl)methyl]formamide, and it showed excellent properties as a solid support.     

Preparation of phosphorus‐containing phenolic resin and its application in epoxy resin as a curing agent and flame retardant

For the sake of improving the flame retardancy of epoxy resin (EP), a novel phosphorus‐containing phenolic resin (PPR) synthesized in our group instead of conventional phenolic resin (PR) was used to cure EP in the present research. The curing processes and the corresponding crosslinking structure and mechanical performance were investigated by differential scanning calorimeter and dynamic mechanical thermal analysis. Because of the introduction of flame‐retarding elements including P and Si, PPR exhibited higher charring capacity in the condensed phase, which is helpful to construct a char layer of higher quality. Correspondingly, PPR‐cured EP displayed remarkably improved flame retardance as compared to conventional PR‐cured EP through the related evaluations including limiting oxygen index, vertical burning test, and microscale combustion colorimeter. As a multifunction agent, it is believable that PPR possesses potential commercial value to prepare flame‐retardant EP with high performance.     

Preparation and characterization of microencapsulated LDHs with melamine‐formaldehyde resin and its flame retardant application in epoxy resin

Layered double hydroxides (LDHs) are emerging as a new and green high‐efficient flame retardant. But LDHs aggregate seriously because of their hydrophilicity, which affect deeply the mechanical and flame retardant properties of their composites. For the first time in this paper, microencapsulated LDHs (MCLDHs) with melamine‐formaldehyde (MF) resin were prepared by microencapsulation technology to enhance their compatibility and dispersion within epoxy resin (EP). The mechanical and flame retardant performances of EP/MCLDH composite were studied by comparing with EP/LDH composite. Results showed that the water contact angle of MCLDHs increased from 8.9° to 122.1°, which indicated good compatibility. The particle size of MCLDHs decreased sharply, and more than one‐third were up to submicron scale, which can be conducive to dispersion. Moreover, the tensile strength and elongation at break of EP/MCLDHs with different flame retardant contents were higher than those of EP/LDHs. And the addition of MCLDHs increased the glass transition temperature (Tg) of EP/MCLDHs, which meant a strong interfacial interaction. Besides, compared with EP/LDHs, the limiting oxygen index values of EP/MCLDHs were higher, and its peak of heat release rate and total heat release decreased by 16.3% and 5.5% respectively. EP/MCLDHs achieved from V‐1 to V‐0 rate with the increasing content of MCLDHs from 20% to 30%, while LDHs/EP never passed tests. In the process of heating, H₂O, CO₂, and NH₃ released from MCLDHs formed gaseous phase, and the remaining dense char layers and oxides produced condensed phase, which played an important role in inhibiting combustion.     

Preparation of a core-shell type MBHA resin and its application for solid-phase peptide synthesis

MBHA (4-methylbenzhydrylamine) resin has been extensively used as a solid support for the synthesis of peptide amides. Herein, we prepared the core-shell-type MBHA resin by benzotriazole-catalyzed amidoalkylation and partial hydrolysis. The core-shell structure of the MBHA resin was confirmed by two-photon microscopy and its synthetic performance in solid-phase peptide synthesis (SPPS) was evaluated.     

应用大孔吸附树脂从农药废水中回收毕克草

毕克草为一种新型除草剂,通常情况下很难被降解,本文利用物理吸附原理通过自行制备的大孔吸附树脂从农药水中对其进行了回收,回收效果良好,同时也达到了废水处理的目的。优化的最佳实验条件:室温下,pH=1.0以及流速为5BV/h时,对COD为15000mg/L的毕克草废水吸附处理后,其出水可达《污水综合排放标准》(GB89—1996)中的一级排放标准;洗脱再生时,室温下,用95%的乙醇洗脱,流速为2BV/h,(即2倍树脂床体积/h)回收率可达98.4%,纯度达93.7%,总流程一次可处理该废水240mL。     

微流控法制备的多孔微球对Cr(Ⅵ)的吸附性能

利用玻璃毛细管搭建单级微流控装置制备单分散水包油（O/W）乳液,以乳液为模板,紫外光照射乳液引发自由基聚合,成功制备了单分散甲基丙烯酸甲酯/甲基丙烯酸二甲基氨基乙酯（MMA/DMAEMA）多孔微球。微球粒径偏差系数（CV）值小于5%,单分散性良好。研究了MMA/DMAEMA多孔微球对Cr(Ⅵ)的吸附性能、再生吸附性能、吸附机理。结果表明：pH对微球吸附Cr(Ⅵ)的量有较大影响,当pH=3时,微球对Cr(Ⅵ)吸附率达到52.9%;循环4次后微球吸附率基本不降低,循环性能好;微球吸附符合准二级动力学模型,属于化学吸附;微球等温吸附符合Langmuir模型,属于单分子层吸附。