Direct determination of cadmium in biological material using electrothermal atomization atomic absorption spectrometry with a metal tube atomizer and a matrix modifier

A direct determination of cadmium by electrothermal atomization atomic absorption spectrometry with a molybdenum tube atomizer has been investigated. Direct calibration method with cadmium standard solutions and ultrasonic agitation method of a solution including sample powder were used. Sulfur served as a matrix modifier for removal of interferences. Though this direct analytical method for cadmium determination in biological materials had a relatively large standard deviation, the accuracy was similar or superior to those of a sample digestion method and the direct analysis without sulfur. The advantages of this method are its simplicity, low cost, high speed of analysis, and rapid calibration.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Cloud point extraction of aluminum (III) in water samples and determination by electrothermal atomic absorption spectrometry,flame atomic absorption spectrometry and UV-visible spectrophotometry

Cloud point extraction was applied as a preconcentration step for the determination of trace level of Al(III) in water samples with electrothermal atomic absorption spectrometry (ETAAS), flame atomic absorption spectrometry (FAAS) and UV-visible spectrophotometry. The aluminum was extracted as aluminum-Eriochrome Cyanine R (ECR) complex, at pH 6 by micelles of the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). The investigations showed that the same CPE procedure can be used for different detection techniques. The results obtained from these techniques were evaluated. Under the optimal conditions, limit of detection obtained with ETAAS, FAAS and UV-visible spectrophotometry were 0.03 ng mL^?1, 0.06 µg mL^?1 and 0.01 µg mL^?1, respectively. The accuracy of the procedure was tested by analysing certified reference material. The method was successfully applied to determination of aluminum in water samples and dialysis fluid.     

Determination of arsenic in mussels by slurry sampling and electrothermal atomic absorption spectrometry (ETAAS)

A method for the determination of arsenic in slurries of mussel tissue using palladium-magnesium nitrate as modifier was optimized. The slurry was stabilized by a 0.015% (v/v) of Triton X-100. To achieve complete mineralization the slurries were ashed at 480 °C for 10s in an air flow (50 ml/min) and at 1200 °C for 15s in an argon flow (300 ml/min) in the presence of Pd—Mg(NO₃)₂ as modifier. The optimum atomization temperature was 2200 °C. The precision and accuracy of the method were studied using the Reference Material BCR n ° 278 Mussel Tissue (Mytilus edulis). The detection limit (LOD) of the final slurry solution was 1 g/l of arsenic corresponding to an arsenic level in the mussel of 1.3 g/g, for a 0.5% (m/v) slurry. Results of calibration using aqueous standards and the standard additions method were compared. The method was applied to the determination of arsenic in mussels from the Galician coast. The levels found lie between 2 and 9.3 g/g of arsenic.     

Determination of nickel in water by electrothermal atomic absorption spectrometry with preconcentration on a tungsten foil

A preconcentration method for nickel in waters involving adsorption on tungsten foil, followed by electrothermal atomic absorption spectrometry (ETAAS) with a tungsten tube atomizer is described. The most suitable pH for nickel adsorption was 5 and the optimum immersion time was 2 min. Severe interferences from co-existing elements (Al, Ca, Cu, Fe, K, Mg, Na, Pb and Zn) on the Ni AA signal were observed. Under optimal conditions, the preconcentration of nickel on W foil could eliminate interferences from these elements. The detection limit of nickel by preconcentration-ETAAS was 0.1 ng/ml (3S/N). The method with preconcentration on tungsten foil was applied to the determination of nickel in river water. The recovery of spiked nickel was 93–102%. The tungsten foil preconcentration method is sensitive, simple, and convenient. This adsorption method can be utilized inin situ-sampling of ultra-trace nickel in environmental samples (water). Furthermore, after sampling it is easy to carry and store the W-foil without contamination for long time.     

Determination of traces of silver in human scalp hair slurries by electrothermal atomic absorption spectrometry

A simple and rapid method for the determination of traces of silver in human hair by slurry sampling and electrothermal atomic absorption spectrometry was optimized. Hair pulverization and the particle size reduction were achieved using a vibrational zirconia mill ball for 20 min. Palladium nitrate, magnesium nitrate and palladium-magnesium nitrate were investigated as chemical modifiers to thermally stabilize silver. Glycerol was used as wetting agent to stabilize the hair slurries. A limit of detection of 21.6 g kg^–1 was obtained for the use of palladium nitrate as best chemical modifier. The repeatibility of the overall procedure (slurry preparation and atomic absorption spectrometric determination) corresponding to eleven measurements was 14.3%. Matrix effect was significant and so, the standard addition method was used to determine silver in hair samples from healthy people. The levels found varied between 0.10 and 1.62 mg kg^–1.     

电沉积-钨丝电热原子吸收光谱法测定水样中的铅

研制了一种便携式钨丝电热原子吸收光谱分析装置,其主要包括:钨丝电热原子化器、多道微型CCD光谱仪、仪器电源系统以及控制系统。并将电沉积分离富集技术与该钨丝电热原子吸收光谱分析仪器结合,完成环境水样中铅的现场分析。并对铅的电沉积条件作了研究,最佳电沉积电位为负650 mV(vs.SCE),方法检出限:0.20μg/L,线性范围:1~15μg/L,对4μg/L Pb标准溶液10次重复测试,RSD为4.4%。     

Determination of cadmium in slurries of marine sediment samples by electrothermal atomic absorption spectrometry using palladium and phosphate as chemical modifiers

A method for the determination of cadmium in slurries of marine sediment using palladium and phosphate as chemical modifier has been optimized. To stabilize the marine sediment slurry, Triton X-100 at 0.1% was used. To obtain a complete pyrolysis of the slurry sample two mineralization steps were used, the first at 480 °C and the second at 600 °C and 700 °C for phosphate and palladium, respectively. The precision and accuracy of the method have been studied by analyzing the Reference Material PACS-1 (marine sediment) of National Research Council Canada. The detection limits (LOD) were 11.9 g kg^–1 for phosphate and 42.0 g kg^–1 when palladium was used. These methods have been applied to the determination of cadmium in marine sediment samples from the Galicia coast and the results of both methods were compared; no significant differences were found between the two procedures.     

Determination of beryllium by electrothermal atomic absorption spectrometry using tungsten surfaces and zirconium modifier

Electrothermal atomization of beryllium from graphite and tungsten surfaces was compared with and without the use of various chemical modifiers. Tungsten proved to be the best substrate, giving the more sensitive integrated atomic absorption signals of beryllium. Tungsten platform atomization with zirconium as a chemical modifier was used for the determination of beryllium in several NIST SRM certified reference samples, with good agreement obtained between the results found and the certified values. The precision of the measurements (at 10 μg L⁻¹), the limit of detection (3σ), and the characteristic mass of beryllium were 2.50%, 0.009 μg L⁻¹ and 0.42 pg, respectively.     

电热原子吸收光谱法测定恐龙化石及其围岩中的铅

电热原子吸收光谱分析法(ETAAS)灵敏度高、操作简便，是测定痕量铅的常用分析方法之一。铅及其化合物易挥发，在热解预处理阶段损失严重。对于某些样品，基体干扰较为复杂，需要选择合适的化学改进剂，如硝酸镁、磷酸、硫脲、磷酸氢二铵、磷酸二氢铵、钯盐等。现有许多测定铅     

原子吸收光谱法测定苦藠中微量元素的含量

苦藠别名小野蒜是食用地下鳞茎及嫩茎叶的野生蔬菜,属药食同源的百合科多年生草本植物.有温中散结,宽胸通阳,祛湿止痢作用~([1,2]).在食疗方面有:(1)降脂作用,且性味辛温,能温阳散结,可用来治疗高胆固醇和高血脂症.(2)降低血压的奇妙作用,常食有通阳气、宽胸的效果.     

Determination of thallium in natural waters by electrothermal atomic absorption spectrometry

Thallium is determined in natural waters by electrothermal atomic absorption Spectrometry after preconcentration. Thallium is oxidized and retained as the tetrachlorothallate (III) ion on an anion exchange column, followed by elution with ammonium sulfite solution. A concentration factor of 400 is achieved. The detection limit of the method is 3.3 ng/1.     

原子吸收和原子荧光光谱分析

本文是《分析试验室》期刊定期评述中关于原子吸收光谱(AAS)及原子荧光光谱(AFS)分析的第11篇综述文章. 文中对2004年12月～2007年4月期间我国在AAS/AFS领域所取得的主要进展进行评述. 内容包括概述、仪器装置与数据处理、火焰原子吸收光谱法、电热原子吸收光谱法、化学蒸气发生技术以及原子荧光光谱法等. 收集文献670篇.     

Determination of trace Cd and Pb in natural waters by direct single drop microextraction combined with electrothermal atomic absorption spectrometry

A new method of direct single-drop microextraction combined with electrothermal atomic absorption spectrometry (ETAAS) is presented for the determination of trace Cd and Pb with dithizone (H₂DZ) as chelating reagent. Factors influencing the microextraction efficiency and determination, such as pH, microdrop volume, stirring rate, extraction time were evaluated. Under the optimized experimental conditions, the detection limits of the method are 2 and 90 pg mL⁻¹ for Cd and Pb, and the relative standards deviations for 0.5 ng mL⁻¹ Cd and 10 ng mL⁻¹ Pb are 11 and 12.8%. After 10 min of extraction, the enrichment factors for Cd and Pb are 118 and 90, respectively. The results for the determination of Cd and Pb in tap water, spring water, river water, pond water, lake water and spiked water samples demonstrate the accuracy, recovery and applicability of the method. An environmental water certified reference material (GSBZ 50009-88) was analyzed, and the determined values are in a good agreement with the certified values. Correspondence: Bin Hu, Department of Chemistry, Wuhan University, Wuhan 430072, P.R. China     

电沉积-钨丝电热原子吸收光谱法测定地质样品中痕量金

以市售幻灯投仪卤钨灯泡钨丝为原子化器的钨丝电热原子吸收光谱分析仪(TC-AAS),功率小、仪器成本低[1,2],如用微型CCD光谱仪作检测系统,可以实现原子吸收光谱仪的小型化,甚至可用于野外现场分析[3,4].     

Determination of trace elements in seawater by electrothermal atomic absorption spectrometry with and without a preconcentration step

The determination of the trace metals Cd, Pb and Cu in seawater by electrothermal atomic absorption spectrometry (ETA-AAS) has been investigated. A combination of the platform with mixed palladium nitrate-magnesium nitrate as matrix modifier and Zeeman background correction allows Cd an Pb to be determined by aqueous standard calibration in appropriately diluted seawater samples. Copper can be determined in undiluted seawater samples without chemical modification using a standard additions method. Detection limits (3) of 2.97,5.27 and 1.1 gl^–1 are obtained for Cd, Pb and Cu respectively. A Kelex-100 impregnated silica C18 material (Kelex 100-C18) has been tried and has proved to be effective as a column packing for extraction/preconcentration of these metals from seawater. Using the column extraction method, the sensitivity of the graphite furnace technique is enhanced 50-fold using a 10 l injection volume. Thus, the determination of the studied three metals in seawater at the ng.l^–1 level could be achieved.     

Speciation of butyltin compounds by ion chromatography coupled to electrothermal atomic absorption spectrometry

A new method for the determination of butyltin species by ion-exchange chromatography linked with graphite-furnace electrothermal atomic absorption spectrometry (ETAAS) is presented. The separation is achieved on a strong cation-exchange column with a 0.18 mol dm^?3 solution of diammonium citrate at pH 6.5 with a step change to pH 4.0 in 60:40 methanol/water solvent. ETAAS detection is performed on-line using an oxidizing matrix modifier. Mono-, di- and tri-butyltin may be determined in a single experiment with detection limits of (respectively) 0.5, 1.1 and 0.8 ng (Sn). Applications to actual samples are reported.     

Thallium fractionation in polluted environmental samples using a modified BCR three-step sequential extraction procedure and its determination by electrothermal atomic absorption spectrometry

Determination of thallium in polluted environmental samples and their extracts obtained by a modified BCR three-step sequential extraction procedure was used to study thallium distribution and mobility in the monitored polluted area affected by acidification (Šobov, Central Slovakia). The results of fractionation applied to 5 soil certified reference materials and 14 environmental samples show that the vast majority of thallium occurred in the residual fraction. This means that highly toxic thallium is strongly entrapped in the parent rock materials remains immobile and its environmental toxicity is therefore reduced. The limit of detection for thallium in the studied fractions was lower than 0.050 mg kg⁻¹, the precision (RSD) of the ultratrace determination of thallium in the studied fractions was better than 17 % and the accuracy of the used method was verified by analyzing certified reference materials. Presented at the XVIIIth Slovak Spectroscopic Conference, Spišská Nová Ves, 15–18 October 2006.     

流动注射-间接原子吸收法测定乌拉地尔

研究了乌拉地尔、Bi(Ⅲ)和KI形成的离子缔合物的性质，提出了流动注射-间接原子吸收法(FI-AAS)分析乌拉地尔的新方法。它是基于乌拉地尔在适当的酸度条件下与BiI4^-反应生成不溶于水的离子缔合物，经流动注射在线过滤稀释，以AAS法测定反应后剩余铋的量来间接测定乌拉地尔的含量。本文对原子吸收、流动注射的工作条件进行了优化，并使用内填微孔滤膜的柱形过滤器收集沉淀，使灵敏度大为提高。乌拉地尔的质量浓度在5-100μg／mL范围内与吸收值呈良好的线性关系，回收率为97.2％-100.8％，采样频率为100次／h。     

石墨炉原子吸收光谱法测定锌基体物料中微量铊

采用B-HNO3-A溶解样品,硝酸钯作基体改进剂,通过优化仪器分析条件,灰化温度为500℃,原子化温度为1 800℃,成功实现了石墨炉原子吸收光谱法测定湿法冶炼锌基体物料锌精矿、锌焙砂、氧化锌、锌粉等物料中微量铊。方法对照实验结果与电感耦合等离子体质谱法(ICP-MS)测定值基本一致。方法的相对标准偏差(RSD,n≤8)为1.7%~7.8%,加标回收率为99%~103%。