New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.     

Sorbents based on calix[4]arenes for extraction of technetium(vii) from acidic and alkaline media

Sorption of Tc^VII from solutions of various compositions with new sorbents prepared by the noncovalent immobilization of (thia)calix[4]arenes on the Amberlite XAD-7™ support was studied. The sorbents studied efficiently extract technetium(vii) from both acidic and alkaline media. The sorption capacity of the sorbent with thiacalix[4]arene groups is superior to that of the sorbents with calix[4]arene groups and several times higher than that of the sorbents previously proposed for the sorption of Tc^VII. Technetium(vii) is sorbed by this sorbent as 1: 1 and 1: 2 thiacalix[4]arene—NH₄TcO₄ and 1: 1 and 1: 2 thiacalix[4]arene—NaTcO₄ complexes.     

Regularities of complexation in the series of sorbents on the polystyrene matrix and their complexes with chromium(III) and manganese(II)

The physicochemical properties of polymeric complexing sorbents with the o,o′-dihydroxy-(1-azo-1′)-functional complexing group were studied. Optimal sorption parameters for chromium(III) and manganese(II) (medium acidity, temperature, time), the sorption capacity of the sorbents, and the stability constants (pK _a′)of the complexes were determined. Correlation relations were established between the dissociation constants (pK _a′) of the sorbent functional group and pH₅₀ of the complexation of the considered elements; between and the stability of the formed complexes (logβ); and between pK _a′ and the deprotonation energy (E _depr) of the sorbent hydroxy group located in the para-position to the introduced substituent. The established correlation relations are useful for targeted prediction of the physicochemical parameters of the sorbents, their complexes, and the sorption of manganese(II) and chromium(III) aimed at recovery and pre-concentration of these ions from objects with various chemical composition.     

Amidoamine calix[4]resorcinarene-based oligomers and polymers as efficient sorbents of azo dyes from water

The sorption behaviour of three kinds of macrocyclic sorbents – amidoamine tetradodecyloxyphenylencalix[4]resorcinarene 1 and tetramethyloxyphenylencalix[4]-resorcinarene 2; composition of calix[4]resorcinarene 1+2, and novel P.1 and P.2 polymers with amidoamine calix[4]resorcinarene units towards three water-soluble azo dyes – methyl orange (MO), acid orange (AO5) and Congo red (CR) was studied. All sorbents form supramolecular complexes with the aforesaid dyes. The best sorbent for MO was shown to be polymer P.1, for the AO5 – composition 1+2 and for the CR – macrocycle 2, with high sorption capacities (373, 497 and 625 mg/g, respectively). The main factor in the binding of dyes by all studied sorbents proved to be surface electrostatic interactions. In addition to the Coulomb interactions, the most important factor for the polymers appeared to be the ‘net’ structure of the polymer with a high concentration of binding sites, providing electrostatic, hydrogen, dipole–dipole and hydrophobic interaction. Hydrophobic substituents in the sorbents exert a significant influence on the dye sorption. The increase of the sorbents' hydrophobicity leads to a lower sorption capacity for MO and CR and a higher sorption capacity for AO5. It was shown that sorption efficiency of the sorbent depends on the ‘dye–sorbent’ structure conformity.     

Solid phase selective separation and green preconcentration of Cu, Zn, Pb and Cd in drinking water by using novel functionalized resin

A new solid — phase extraction sorbent was developed based on stepwise anchoring of two ligand molecules for the determination of copper, zinc, lead and cadmium in drinking water by flame AAS. Amberlite XAD-2 functionalized with 4′-(2-hydroxyphenylazo)-3′-methyl-1′-phenyl-2′-pyrazolin-5′-one (HPAPyr) was utilized for preconcentration/separation of these elements. The sorbent was prepared by two successive azo coupling reactions. First, 2-aminophenol was anchored to the amino groups in the resin resulted from nitration followed by reduction. Then, the resulted 2-aminophenol functionalized resin was further diazotized and coupled to the pyrazolone compound and the final product HPAPyr-XAD-2 was characterized by IR and elemental analysis. The optimum pH range for sorption, shaking time, exchange capacity, sample flow rate, preconcentration factor and interference from co-existing ions were investigated. All metal ions were quantitatively desorbed from the resin by 4.5 mol L⁻¹ nitric acid solution. The sorbent provides limit of detection within the range 0.9–3.3 μg L⁻¹ and concentration factor up to 250. The procedure was validated by analysis of certified material NIST-SRM 1577b. Application to drinking water showed satisfactory results with relative standard deviation RSD ≤ 8.5%.      

Reaction of lead ions with hydroxylapatite granules

In the effort to improve the performance of hydroxylapatite (HA) in removing lead ions from aqueous solutions, millimeter-sized granules with 50 % porosity were synthesized. Such HA particles, after drying at 100°C, or heating at 800°C or 1100°C, exhibited the specific surface areas of 50 m² g⁻¹, 25 m² g⁻¹, and 5 m² g⁻¹, respectively. It was found that heavy metal sorption capacity of HAs can be related to their surface area. Non-calcined granules were difficult to handle and easy to crush. Hardened granules showed heavy metal absorption on their outer surfaces. Absorption capacity of sintered HA particles towards lead was lower but adsorbed lead ions were spread inside the porous structure of HA granules more evenly. Under flow conditions, lead ions were captured by HA at a rate of 0.5 mg g⁻¹ min⁻¹. Small lead phosphate aggregates were released from the HA sorbent together with calcium ions. Size of the aggregates depended on the lead concentration and ranged from 1–50 μm in diameter; the aggregates could be removed by ultrafiltration. Results show that porous hardened HA granules can be used as an efficient phosphate source for the immobilization of lead ions from aqueous media. Organic ligands tend to interfere with the water purification procedure.     

Application of a new nanoporous sorbent for extraction and pre-concentration of lead and copper ions

The authors describe a method for the trace determination of copper (II) and lead (II) in water and fish samples using solid-phase extraction via siliceous mesocellular foam functionalised by dithizone. Siliceous mesocellular was functionalised with dithizone, and the resulting sorbent was characterised by scanning electron microscopy, surface area analysis, thermogravimetric/differential thermal analysis and FTIR. Following solid-phase extraction of target ions by the sorbent, copper and lead ions were quantified by flame atomic absorption spectrometry. Factors affecting the sorption and desorption of target ions by the sorbent were evaluated and optimised. The calibration plot is linear in the 1 – 500 μg L^?1 copper (II) and 3–700 μg L^?1 lead (II) concentration range. The relative recovery efficiency in real sample analysis is in the range from 96 to 102%, and precision varies between 1.7 and 2.8%. It is should be noted that the limits of detection for the copper and lead analysis were 0.8 and 1.6 μg L^?1, respectively. Also, the adsorption capacities for copper and lead ions were 120 and 160 mg g^?1, respectively. The obtained pre-concentration factor for the lead and copper ions by the proposed solid-phase extraction was 75. The method was successfully applied to the determination of low levels of copper (II) and lead (II) in tap, Caspian sea, Persian gulf and lake water and also their detection in fish samples.     

Sorption-Catalytic Determination of Imazapyr on a Copper-Containing Sorbent

 Sorption of copper on filter-paper with chemically attached hexamethylenediamino-groups (HMDA-filter) allows to obtain the sorbent (Cu/HMDA-filter) stable in respect to desorption of copper. A nitrogen-containing herbicide imazapyr (imaz) is retained on Cu/HMDA-filters at pH 5.5–7.0 forming a relatively stable complex. Imazapyr is determined directly on the sorbent by its activating effect in the oxidation of hydroquinone with H₂O₂ catalyzed by Cu(II) with the formation of a product absorbing at 490 nm. The copper ions serve both to preconcentrate imazapyr and to catalyze the indicator reaction. The use of 1-μL sample aliquots pipetted onto the Cu/HMDA-filters allows to determine 1 × 10⁻³–0.03 μmol of imazapyr, whereas preconcentration of the analyte by pumping of its solution through the same sorbent expands the linear range to 1 × 10⁻⁴–1 × 10⁻¹ μmol of imazapyr. When the indicator reaction is carried out in solution, the range of activating action of imazapyr is narrower (0.06–0.1 μmol a for a solution volume of 10 mL). The determination is selective: 5–100-fold amounts of amines, aminoacids, carboxylic acid derivatives and other model compounds do not interfere. Soil extracts and carrot juice samples spiked with imazapyr have been analyzed. Received January 10, 2000. Revision July 28, 2000.     

Properties and Application of a Chelating Sorbent Prepared by Modification of LiChroprep-NH<Subscript>2</Subscript> with Calcon

A new chelating sorbent for metal ions was prepared by modification of chemically modified silica – LiChroprep-NH₂ with Calcon. The molecular mechanism of binding this reagent to the surface of the applied carrier is presented. The properties of this sorbent were compared to analogous sorbents with a plain silica carrier and chemically modified silicas – LiChroprep-RP containing Calcon. The advantages of the new sorbent compared to the silica and LiChroprep-RP chelating sorbents are demonstrated. The sorbent obtained was applied as stationary phase in solid-phase extraction (SPE) for separations of some chosen mixtures of metal ions and for additional purification of aqueous solutions of salts of alkali metals from trace amounts of heavy metals. The multiple use of the sorbent based on LiChroprep-NH₂ in sorption-desorption processes of metal ions without deterioration of its sorption capacity is demonstrated.     

Thiocarbamoyl chitosan as a novel sorbent with high sorption capacity and selectivity for the ions of gold(III), platinum(IV), and palladium(II)

Thiocarbamoyl chitosan (TCC) was synthesized by grafting thiourea on chitosan backbone in eutectic composition of ammonium thiocyanate—thiourea. Insoluble products with the amno group functionalization degree of 0.3–1.1 can be prepared by varying the conditions of polymer-analogous (synthesis in a gel) transformation. Structure of the synthesized chitosan derivatives was characterized by elemental analysis, diffuse reflectance infrared spectroscopy, and the solid state ¹³C NMR. Study of sorption properties of TCC shows high sorption capacity and selectivity for the ions of gold(III), platinum(IV), and palladium(II) as evidenced by results obtained at pH 2 in the presence of 100–1000-fold excess of iron(III), copper(II), zinc(II), and nickel(II). Sorption capacity of TCC for all ions increases with the increase in the degree of substitution and changes in the series: Au^III > Pd^II > Pt^IV.     

Microwave-Assisted Minutes Synthesis of Bioactive Phenylbutanoids Occurring in <Emphasis Type="Italic">Zingiber cassumunar</Emphasis>

Microwave-assisted condensation of benzaldehyde (3a,b) with acetone in aqueous sodium hydroxide adsorbed on basic alumina provides phenylbutenone (4a–4b) in 68–71% yield within 4 min, which upon further reduction with sodium borohydride and basic alumina gives phenylbutenol (5a,b) in 91–94% yield within 2 min. Dehydration of 5 with anhydrous copper (II) sulfate gives phenylbutadiene (1a,b), a metabolite of Zingiber cassumunar, within 3 min in 42–48% yield, respectively. All the steps involve environmental friendly solvents and reagents, mild reaction conditions, and overall formation of product 1a,b from 3a,b in 34–38% yield within 9 min under microwave irradiation. __________ Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 300–302, July–August, 2005.     

Different coordination modes and supramolecular aggregations in copper(II) pentane-2,4-dionato compounds with 2-pyridone and 3-hydroxypyridine

Abstract  

Copper(II) bis(pentane-2,4-dionato-κ² O,O′) compounds with 2-pyridone (1) and 3-hydroxypyridine (2) were prepared by the reaction of bis(pentane-2,4-dionato-κ² O,O′)copper(II) with selected ligands. The coordination of Cu(II) in both compounds is square pyramidal with the fifth coordination site occupied by the carbonyl oxygen atom of the 2-pyridone ligand in 1 and by the nitrogen atom of 3-hydroxypyridine in 2. The X-ray crystallographic studies revealed different crystal aggregation influenced by the ability of the 2-pyridone ligand to act as a hydrogen bond donor and acceptor, and 3-hydroxypyridine acting only as a hydrogen bond donor. Intermolecular N–H···O hydrogen bonding forms dimers in 1 and infinite chains in 2. Three-dimensional aggregation is achieved by π–π interactions and C–H···π (arene) hydrogen bonding.     

Solid complexes of iron(II) and iron(III) with rutin

Solid complex compounds of Fe(II) and Fe(III) ions with rutin were obtained. On the basis of the elementary analysis and thermogravimetric investigation, the following composition of the compounds was determined: (1) FeOH(C₂₇H₂₉O₁₆)·5H₂O, (2) Fe₂OH(C₂₇H₂₇O₁₆)·9H₂O, (3) Fe(OH)₂(C₂₇H₂₉O₁₆)·8H₂O, (4) [Fe₆(OH)₂(4H₂O)(C₁₅H₇O₁₂)SO₄]·10H₂O. The coordination site in a rutin molecule was established on the basis of spectroscopic data (UV–Vis and IR). It was supposed that rutin was bound to the iron ions via 4C=O and 5C—oxygen in the case of (1) and (3). Groups 5C–OH and 4C=O as well as 3′C–OH and 4′C–OH of the ligand participate in binding metals ions in the case of (2). At an excess of iron(III) ions with regard to rutin under the synthesis conditions of (4), a side reaction of ligand oxidation occurs. In this compound, the ligands’ role plays a quinone which arose after rutin oxidation and the substitution of Fe(II) and Fe(III) ions takes place in 4C=O, 5C–OH as well as 4′C–OH, 3′C–OH ligands groups. The magnetic measurements indicated that (1) and (3) are high-spin complexes.     

Palladium and platinum sorption using chitosan-based hydrogels

Two chitosan hydrogels (prepared by NaOH neutralization and by polyphosphate ionotropic gelation) have been tested in the dry state for Pd(II) and Pt(IV) sorption at pH 2. Similar sorption isotherms with maximum sorption capacities close to 190 mg Pd g⁻¹ and 235 mg Pt g⁻¹ were achieved. The sorption mechanism involves electrostatic attraction of the chloro-anionic species onto protonated amine groups; the drastic decrease of sorption capacity with the addition of chloride ions supports this hypothesis. SEM-EDAX analysis suggests that sorption proceeds, in kinetic terms, through a shrinking core mechanism. Metal ions can diffuse throughout all the sorbent volume. The main differences between the sorbents are revealed by kinetics. The hydrogels prepared by ionotropic gelation in polyphosphate (C-PPh) allows reaching equilibrium much faster than the hydrogels prepared by the neutralization process (C-NaOH). While for C-PPh sorbent the chemical reaction rate seems to control sorption profiles, in the case of C-NaOH a combination of mechanisms including intraparticle diffusion resistance controls uptake kinetics. Metal desorption from loaded sorbents is possible using thiourea alone or in association with HCl solutions. The recycling of the sorbents is possible but for a limited number of cycles.     

Photochromic crown ethers

An amphiphilic crown-containing styryl dye (1) was synthesized, and the effects of irradiation, temperature, and alkali and alkali-earth metal ions on the conductivity and optical spectra of its solutions in dioctyl phthalate were studied. Compound1 in thetrans-form almost completely exists as ion pairs (IP). Irradiation at a long-wavelength absorption maximum (λ_max) results in a reversible increase in the conductivity and, hence, a degree of dissociation of IP (α); these parameters decrease when complexes with metal ions are formed. The relaxation times for the photoinduced conductivity coincide with a decrease in the extinction within experimental error in the 20–60°C temperature range. The photoinduced increase in α is caused bytrans—cis-isomerization and an increase in steric hindrances for the interaction of the ClO₄ ⁻ anion with the N⁺ atom of benzothiazolium in thecis-form of1. The activation energies for the darkcis—trans-relaxation, absolute α values, and thermodynamic parameters of dissociation of IP in thetrans-form, as well as the α values in a photostationary mixture ofcis—trans-isomers, were estimated. The decrease in α after binding with metal ions is likely caused by the redistribution of the positive charge to benzothiazolium through the conjugated system of1. Correlations between the decrease in conductivity (decrease in α) and the hypsochromic shift Δλ_max after the formation of complexes between1 and metal ions were observed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1296–1301, July, 1997.     

Capillary complexation gas chromatography in analysis of cyclic and aromatic hydrocarbons

Summary Results of studies on stationary phases containing copper(II), nickel(II) and cobalt(II) chloride chemically bonded via cyano—or thiol groups are presented. The retention parameters—i.e. retention factor (k), retention index (I) and molecular retention index (ΔMe) and specific retention volume (Vg)-enabled the characteristics of specific interaction between aromatic and cyclic hydrocarbons and metal complexes chemically bonded to stationary phases to be determined. Presented at Balaton Symposium on High Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Supramolecular systems of amphiphilic derivatives of calix[4]resorcinarenes and surfactants in chloroform

Aggregation of amphiphilic calix[4]resorcinarenes (CRA) modified by carboxymethyl (1), 2-hydroxyethyl (2), methylamino acetal (3), and aminomethyl (4) fragments and their interaction with some synthetic (5, 6) and natural (7, 8) surfactants in the low-polarity solvent (chloroform) were studied by permittivity measurements and FT-IR spectroscopy. Compounds 1–4 and surfactants form aggregates at critical micelle concentrations (CMC) of 2.0·10⁻⁵–7.5·10⁻⁵ and 1.7·10⁻⁵–2.0·10⁻³ mol L⁻¹, respectively. The CMC values of CRA—surfactant mixed aggregates depend on the surfactant structure and the structure and concentration of CRA. Analysis of the IR spectra of solutions of a series of amphiphilic CRA (2–4, 9, 10) and their mixtures with the cationic surfactant N-cetyl-N,N-dimethyl-N-(2-hydroxyethyl)ammonium bromide (5) showed that an increase in the concentration of the solutions in individual and mixed systems is accompanied by a decrease in the molar integral intensities and intensities in the maxima of the absorption bands of the O—H and C—H bonds down to the CMC point, after which these values change slightly. The discovered effect, which is differently pronounced for all systems studied, indicates that both the polar “head” groups and nonpolar fragments of CRA and surfactant are involved in the formation of supramolecules of the reverse micelle type in all cases. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 459–466, March, 2007.     

Ring-expansion reaction of 1-hydroperoxy-16-oxabicyclo[10.4.0]hexadecane catalyzed by copper ions: use in the synthesis of 15-pentadecanolide

A catalytic procedure has been developed for the synthesis of 15-pentadecanolide (1) from readily available 1-hydroperoxy-16-oxabicyclo[10.4.0]hexadecane (2). The method is based on the reaction of hydroperoxide2 with copper acetate (0.15–5 mol.%). Ring expansion occurred as a result of generation of tertiary bicyclohexadecyloxyl radicals4 from hydroperoxide2 under the action of Cu¹ ions, β-scission of the radicals accompanied by regioselective cleavage of the bridge bond to form macrocyclic C-centered radicals5, and their oxidation by Cu¹¹ ions to (E)-11- and (E)-12-pentadecen-15-olides (6). The products obtained were converted into 15-pentadecanolide by subsequent catalytic hydrogenation over a Pd catalyst in a yield of more than 90% with respect to hydroperoxide2. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1197–1200, June, 1998.     

Spin exchange between transition metal complexes and nitroxyl radicals in nonaqueous media

New complexes of diaza- and tetraaza-containing crown ethers, viz., 1,10-diaza-18-crown-6 (1), 1,4,8,12-tetraazacyclopentadecane (2), 1,4,8,11-tetraazacyclotetradecane (3), and 1,4,8,11-tetraazacyclotetradecane 1,4,8,11-tetrachloride tetraacetic acid tetrahydrate (4), with the divalent copper and nickel ions and the Cl^–, Br^–, ClO₄ ^–, NO₃ ^–, and AcO^– counterions were synthesized. The exchange interactions of these compounds and paramagnetic copper and nickel salts with the TEMPO radical in MeOH—CHCl₃ binary mixtures of different compositions were studied. The plots of the linewidths of the hyperfine coupling components of TEMPO vs. concentration of the ions and temperature show that the frequency of diffusion collisions is the rate-limiting step for spin exchange (strong exchange regime). A strong dependence of the exchange rate constant (k _ex) on the crown ether and counterion structure was found. The isotropic hyperfine coupling constants (a _Cu) and g factors (g _i ) were measured for the Cu^II complexes with the crown ethers. In the case of the crown ether complexes 1—3 with CuCl₂, the a _Cu constant decreases linearly with an increase in g _i = g _i – 2.0023 in the series 3 < 2 < 1, whereas k _ex increases linearly in the same series with a decrease in the contact HFC on the Cu^II nucleus (K) and a decrease in covalence of bonding. For the complexes of 2 with Cu^II and different axial ligands (counterions), k _ex increases in the series Cl^– < ClO₄ ^– AcO^– Br^–; < NO₃ ^–. In the case of the complexes of 2 with NiCl₂, k _ex increases in the series 1 < 4 < 3 2. For the Cu^II and Ni^II salts with the Cl^–, ClO₄ ^–, and NO₃ ^– anions, the k _ex values are almost independent of the anion nature. The correlation of the k _ex values with the electron-spin parameters of the complexes is discussed.