Energetic Salts Based on an Oxygen‐Containing Cation: 2,4‐Diamino‐1,3,5‐triazine‐6‐one

A family of energetic salts with high thermal stability and low impact sensitivity based on an oxygen‐containing cation, 2,4‐diamino‐1,3,5‐triazine‐6‐one, were synthesized and fully characterized by IR and multinuclear (¹H, ¹³C) NMR spectroscopy, elemental analysis, and differential scanning calorimetry. Insights into their sensitivities towards impact, friction, and electrostatics were gained by submitting the materials to standard tests. The structures of 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate, 2,4‐diamino‐1,3,5‐triazine‐6‐one sulfate, 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, 2,4‐diamino‐1,3,5‐triazine‐6‐one 5‐nitrotetrazolate were determined by single‐crystal X‐ray diffraction; their densities are 1.691, 1.776, 1.854, and 1.636 g cm^?3, respectively. Most of the salts decompose at temperatures over 180 °C; in particular, the salts 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate and 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, which decompose at 303.3 and 336.4 °C, respectively, are fairly stable. Furthermore, most of the salts exhibit excellent impact sensitivities (>40 J), friction sensitivities (>360 N), and are insensitive to electrostatics. The measured densities of these energetic salts range from 1.64 to 2.01 g cm^?3. The detonation pressure values calculated for these salts range from 14.6 to 29.2 GPa, and the detonation velocities range from 6536 to 8275 m s^?1; these values make the salts potential candidates for thermally stable and insensitive energetic materials.     

Nanostructures from Self‐Assembling Triazine Tertiary Amine N‐Oxide Amphiphiles

A new set of amphiphilic tertiary amine N‐oxides has been prepared and their self‐assembly properties observed in aqueous solution by tensiometry, dynamic and static light scattering. X‐ray crystallographic analysis of parent amines and sulfoxide congeners indicates the formation of hydrogen‐bonded dimers as the primary assembly unit for formation of vesicles in preference to the compact micelles typical of lauryl dimethylamine N‐oxide (LDAO). 6‐Benzyloxy‐N,N′‐bis(5‐diethylaminopentylamine oxide)[1,3,5]triazine‐2,4‐diamine forms a 1 μm vesicle observed to entrap fluorescein. The [1,3,5]triazine core thus allows variation of the new self‐assembled structures from nano‐ to micrometre length scales.     

Cocrystals of 2,6‐dichloroaniline and 2,6‐dichlorophenol plus three new pseudopolymorphs of their coformers

The structures of cocrystals of 2,6‐dichlorophenol with 2,4‐diamino‐6‐methyl‐1,3,5‐triazine, C₆H₄Cl₂O·C₄H₇N₅, (III), and 2,6‐dichloroaniline with 2,6‐diaminopyrimidin‐4(3H)‐one and N,N‐dimethylacetamide, C₆H₅Cl₂N·C₄H₆N₄O·C₄H₉NO, (V), plus three new pseudopolymorphs of their coformers, namely 2,4‐diamino‐6‐methyl‐1,3,5‐triazine–N,N‐dimethylacetamide (1/1), C₄H₇N₅·C₄H₉NO, (I), 2,4‐diamino‐6‐methyl‐1,3,5‐triazine–N‐methylpyrrolidin‐2‐one (1/1), C₄H₇N₅·C₅H₉NO, (II), and 6‐aminoisocytosine–N‐methylpyrrolidin‐2‐one (1/1), C₄H₆N₄O·C₅H₉NO, (IV), are reported. Both 2,6‐dichlorophenol and 2,6‐dichloroaniline are capable of forming definite synthon motifs, which usually lead to either two‐ or three‐dimensional crystal‐packing arrangements. Thus, the two isomorphous pseudopolymorphs of 2,4‐diamino‐6‐methyl‐1,3,5‐triazine, i.e. (I) and (II), form a three‐dimensional network, while the N‐methylpyrrolidin‐2‐one solvate of 6‐aminoisocytosine, i.e. (IV), displays two‐dimensional layers. On the basis of these results, attempts to cocrystallize 2,6‐dichlorophenol with 2,4‐diamino‐6‐methyl‐1,3,5‐triazine, (III), and 2,6‐dichloroaniline with 6‐aminoisocytosine, (V), yielded two‐dimensional networks, whereby in cocrystal (III) the overall structure is a consequence of the interaction between the two compounds. By comparison, cocrystal–solvate (V) is mainly built by 6‐aminoisocytosine forming layers, with 2,6‐dichloroaniline and the solvent molecules arranged between the layers.     

Synthesis and antivirus activity of 1,3,5‐triazine derivatives

Reaction of 6‐phenyl‐4‐thioxo‐1,3,5‐triazine‐2‐one with alkyl halide in the presence of 1 equiv. of sodium hydroxide resulted in 4‐alkylthio‐6‐phenyl‐1,3,5‐triazine‐2‐one in good yield, whereas the above reaction provided 2‐alkoxyl‐4‐alkylthio‐6‐phenyl‐1,3,5‐triazine in the presence of 2 equiv. of sodium hydroxide. 6‐Phenyl‐4‐thioxo‐1,3,5‐triazine‐2‐one was oxidized with hydrogen peroxide to give 6‐phenyl‐1,3,5‐triazine‐2,4‐dione. Further treatment with ethyl bromoacetate or (substituted) benzyl bromides yielded 2,4‐dialkoxy‐6‐phenyl‐1,3,5‐triazines. At the same time, a small amount of 2‐dimethylamino‐4‐alkoxy‐6‐phenyl‐1,3,5‐triazines were isolated. Preliminary bioassays indicate that the title compounds possess good activities against tobacco mosaic virus. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:542–545, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10189     

Synthesis,Characterization, and Energetic Properties of 6‐Amino‐tetrazolo[1,5‐b]‐1,2,4,5‐tetrazine‐7‐N‐oxide: A Nitrogen‐Rich Material with High Density

The synthesis and energetic properties of a novel N‐oxide high‐nitrogen compound, 6‐amino‐tetrazolo[1,5‐b]‐1,2,4,5‐tetrazine‐7‐N‐oxide, are described. Resulting from the N‐oxide and fused rings system, this molecule exhibits high density, excellent detonation properties, and acceptable impact and friction sensitivities, which suggests potential applications as an energetic material. Compared to known high‐nitrogen compounds, such as 3,6‐diazido‐1,2,4,5‐tetrazine (DiAT), 2,4,6‐tri(azido)‐1,3,5‐triazine (TAT), and 4,4′,6,6′‐tetra(azido)azo‐1,3,5‐triazine (TAAT), a marked performance and stability increase is seen. This supports the superior qualities of this new compound and the advantage of design strategy.     

A Hybrid statistical mechanics—quantum chemical model for proton transfer in 5‐azauracil and 6‐azauracil in water solution

A hybrid statistical physics—quantum‐chemical methodology was implemented to study the water‐assisted intramolecular proton‐transfer processes in 5‐ and 6‐azauracils in aqueous solutions. The solvent effects were included in the model by explicit inclusion of two pairs of water molecules, which model the relevant part of the first hydration shell around the solute. The position of these water molecules was initially estimated by carrying out a classical Metropolis of dilute water solutions of the title compounds and subsequently analyzing solute–solvent intermolecular interactions in the Monte Carlo‐generated configurations. Sequentially to the statistical physics simulation, ab initio quantum mechanical (QM) level of theory was implemented. The effects of the water as solvent (at ab initio QM level) were introduced at two different levels—using solute–solvent clusters (four‐water molecules) and using the same clusters embedded in an external continuum. Full geometry optimizations of these complexes were carried out at MP2/6–31 + G(d, p) and conductor‐polarizable continuum model (C‐PCM)/MP2/6–31 + G(d, p). Single point calculations were performed at CCSD(T)/6–31 + G(d, p)//MP2/6–31 + G(d, p) computational level to obtain more accurate energies. According to our calculations hydrated azauracils should exist in three forms: mainly dioxo form and two hydroxy forms. The calculated proton transfer activation energies for tautomeric reactions of 5‐azauracil and 6‐azauracil show different pictures for these two compounds. According to C‐PCM/MP2/6–31 +G(d, p) data, water‐assisted proton transfer in 5‐azauracil realizes through two parallel reactions: 1,3,5‐triazine‐2,4(1H,3H)‐dione → 6‐hydroxy‐1,3,5‐triazin‐2(1H)‐one and 1,3,5‐triazine‐2,4(1H,3H)‐dione → 4‐hydroxy‐1,3,5‐triazin‐2(1H)‐one. Tautomeric equilibrium in 6‐azauracil in water could occur by two contiguous reactions: 1,2,4‐triazine‐3,5(2H,4H)‐dione → 5‐hydroxy‐1,2,4‐triazin‐3(2H)‐one and 5‐hydroxy‐1,2,4‐triazin‐3(2H)‐one → 3‐hydroxy‐1,2,4‐triazin‐5(2H)‐one. The proton transfer investigated reactions in 5‐ and 6‐azauracils involve concerted atomic movement. © 2015 Wiley Periodicals, Inc.     

On the chemistry of 5‐aryl‐2‐hydrazino‐benzo[6,7]cyclohepta[1,2‐b]pyrido[2,3‐e] pyrimidin‐4‐one

Several pyrido[2,3‐e]pyrimidine fused with other rings have been prepared by intramolecular cyclization of 5‐(4‐chlorophenyl)‐2‐hydrazino‐benzo [6,7]cyclohepta‐[1,2‐b]pyrido[2,3‐e]pyrimidine‐4‐one ( 1 ) with acids, carbon disulfide to form triazole derivatives ( 2,4 ), halo‐ketones to give triazine derivative ( 5 ), β‐ketoesters, β‐cyanoesters, and β‐diketones to yield 2‐(1‐pyrazolyl) derivatives ( 7,9,10 ), and aldehydes to form arylhydrazone derivatives ( 11a,b ) which cyclized to form triazoles ( 12a,b ). Also, acyclic N‐nucleosides are prepared by heating under reflux 2‐hydrazino‐benzo[6,7]cyclohepta[1,2‐b]pyrido[2,3‐e] pyrimidin‐4‐one ( 1 ) with xylose and glucose to give the corresponding acyclic N‐nucleosides ( 13a,b ) which are cyclized to afford the corresponding protected tetra and penta–O‐acetate C‐nucleosides ( 14a,b ). Deacetylating of the latter nucleosides afforded the free acyclic C‐nucleosides ( 15a,b ). © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:34–43, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20248     

Synthesis of 5‐methyl‐4‐oxo‐2‐(coumarin‐3‐yl)‐N‐aryl‐3,4‐dihydrothieno[2,3‐d]‐pyrimidine‐6‐carboxamides

Possible approaches to synthesis of 5‐methyl‐4‐oxo‐2‐(coumarin‐3‐yl)‐N‐aryl‐3,4‐dihydrothieno[2,3‐d]pyrimidine‐6‐carboxamides 4 have been discussed. It is shown that the preferable approach is cyclization of 2‐iminocoumarin‐3‐carboxamides 1 , utilizing 5‐amino‐3‐methyl‐N²‐arylthiophene‐2,4‐dicarboxamides 2 as binucleophilic reagents. The proposed procedure allowed us to easily obtain 4 in two stages, using common reagents. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:341–346, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20303     

Tris(2‐cyanoethyl) isocyanurate

The title compound, 1,3,5‐tris(2‐cyano­ethyl)‐1,3,5‐triazine‐2,4,6(1H,3H,5H)‐trione, C₁₂H₁₂N₆O₃, forms a layered structure stabilized by C—H?O and C—H?N hydrogen bonds.     

Theoretical Investigation of 4,4′,6,6′‐Tetra(azido)azo‐1,3,5‐triazine‐N‐oxides and the Effects of N→O Bonding on Organic Azides

A family of 4,4′,6,6′‐tetra(azido)azo‐1,3,5‐triazine‐N‐oxides was designed and investigated by theoretical method. The effects of the N→O bond on the properties of TAAT‐N‐oxides, such as density, heat of formation, and detonation performance, were discussed. By comparison with the bond‐dissociation energy of the weakest bond and the electrostatic potentials, the effects of the N→O bond on the stability and impact sensitivity of organic azides were also discussed. The results show that the introduction of N→O bonds at the appropriate positions increases the oxygen balance and density of the compounds, while it has little effect on the stability and impact sensitivity. Consequently, their introduction results in energetic compounds with improved detonation performances.     

Linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit: Synthesis and optical properties

Some linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit were synthesized via Sonogashira or Suzuki reaction for the first time and characterized by IR, NMR, and GPC. Because of the introduction of 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit into π‐conjugated system, all polymers exhibited good thermal stability with high decomposition temperature. Their optical and electrochemical properties were investigated. Based on the 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit linked with different aromatic rings, the polymers showed the tunable fluorescence from blue to blue‐green emission with satisfied quantum yield. Cyclic voltammetry measurement indicated that the LUMO and HOMO levels of the polymers could be adjustable through the main‐chain structural modification. All polymers had low LUMO level (?2.86 to ?3.06 eV) due to the high‐electron affinity of triazine unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 702–712, 2008     

Three‐dimensional hydrogen‐bonded framework in bis(melamin‐1‐ium) naphthalene‐1,5‐disulfonate melamine pentahydrate

Crystals of the title compound, 2C₃H₇N₆⁺·C₁₀H₆O₆S₂²⁻·C₃H₆N₆·5H₂O, are built up of neutral 2,4,6‐triamino‐1,3,5‐triazine (melamine), singly protonated melaminium cations, naphthalene‐1,5‐disulfonate dianions and water molecules. Two independent anions lie across centres of inversion in the space group P. The melamine molecules are connected by N—H...N hydrogen bonds into two different one‐dimensional polymers almost parallel to the (010) plane, forming a stacking structure along the b axis. The centrosymmetric naphthalene‐1,5‐disulfonate anions interact with water molecules via O—H...O hydrogen bonds, forming layers parallel to the (001) plane. The cations and anions are connected by N—H...O and O—H...N hydrogen bonds to form a three‐dimensional supramolecular framework.     

The ESI CAD fragmentations of protonated 2,4,6‐tris(benzylamino)‐ and tris(benzyloxy)‐1,3,5‐triazines involve benzyl–benzyl interactions: a DFT study

The electrospray ionization collisionally activated dissociation (CAD) mass spectra of protonated 2,4,6‐tris(benzylamino)‐1,3,5‐triazine (1) and 2,4,6‐tris(benzyloxy)‐1,3,5‐triazine (6) show abundant product ion of m/z 181 (C₁₄H₁₃⁺). The likely structure for C₁₄H₁₃⁺ is α‐[2‐methylphenyl]benzyl cation, indicating that one of the benzyl groups must migrate to another prior to dissociation of the protonated molecule. The collision energy is high for the ‘N’ analog (1) but low for the ‘O’ analog (6) indicating that the fragmentation processes of 1 requires high energy. The other major fragmentations are [M + H‐toluene]⁺ and [M + H‐benzene]⁺ for compounds 1 and 6, respectively. The protonated 2,4,6‐tris(4‐methylbenzylamino)‐1,3,5‐triazine (4) exhibits competitive eliminations of p‐xylene and 3,6‐dimethylenecyclohexa‐1,4‐diene. Moreover, protonated 2,4,6‐tris(1‐phenylethylamino)‐1,3,5‐triazine (5) dissociates via three successive losses of styrene. Density functional theory (DFT) calculations indicate that an ion/neutral complex (INC) between benzyl cation and the rest of the molecule is unstable, but the protonated molecules of 1 and 6 rearrange to an intermediate by the migration of a benzyl group to the ring ‘N’. Subsequent shift of a second benzyl group generates an INC for the protonated molecule of 1 and its product ions can be explained from this intermediate. The shift of a second benzyl group to the ring carbon of the first benzyl group followed by an H‐shift from ring carbon to ‘O’ generates the key intermediate for the formation of the ion of m/z 181 from the protonated molecule of 6. The proposed mechanisms are supported by high resolution mass spectrometry data, deuterium‐labeling and CAD experiments combined with DFT calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Three 4,7‐diaryl‐2‐ethylsulfanylpyrazolo[1,5‐a][1,3,5]triazines

The molecular dimensions of 2‐ethylsulfanyl‐7‐(4‐methylphenyl)‐4‐phenylpyrazolo[1,5‐a][1,3,5]triazine, C₂₀H₁₈N₄S, (I), 7‐(4‐chlorophenyl)‐2‐ethylsulfanyl‐4‐phenylpyrazolo[1,5‐a][1,3,5]triazine, C₁₉H₁₅ClN₄S, (II), and 4,7‐bis(4‐chlorophenyl)‐2‐(ethylsulfanyl)pyrazolo[1,5‐a][1,3,5]triazine, C₁₉H₁₄Cl₂N₄S, (III), show evidence for some aromatic delocalization in the pyrazole rings. The conformations adopted by the ethylsulfanyl substituents are different in all three compounds. There are no hydrogen bonds in any of the crystal structures, but pairs of molecules in (II) and (III) are linked into centrosymmetric dimers by π‐stacking interactions.     

Sulfur as hydrogen‐bond acceptor in cocrystals of 2‐thio‐modified thymine

Doubly and triply hydrogen‐bonded supramolecular synthons are of particular interest for the rational design of crystal and cocrystal structures in crystal engineering since they show a high robustness due to their high stability and good reliability. The compound 5‐methyl‐2‐thiouracil (2‐thiothymine) contains an ADA hydrogen‐bonding site (A = acceptor and D = donor) if the S atom is considered as an acceptor. We report herein the results of cocrystallization experiments with the coformers 2,4‐diaminopyrimidine, 2,4‐diamino‐6‐phenyl‐1,3,5‐triazine, 6‐amino‐3H‐isocytosine and melamine, which contain complementary DAD hydrogen‐bonding sites and, therefore, should be capable of forming a mixed ADA–DAD N—H…S/N—H…N/N—H…O synthon (denoted synthon 3s_{N·S;N·N;N·O}), consisting of three different hydrogen bonds with 5‐methyl‐2‐thiouracil. The experiments yielded one cocrystal and five solvated cocrystals, namely 5‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine (1/2), C₅H₆N₂OS·2C₄H₆N₄, (I), 5‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylformamide (2/2/1), 2C₅H₆N₂OS·2C₄H₆N₄·C₃H₇NO, (II), 5‐methyl‐2‐thiouracil–2,4‐diamino‐6‐phenyl‐1,3,5‐triazine–N,N‐dimethylformamide (2/2/1), 2C₅H₆N₂OS·2C₉H₉N₅·C₃H₇NO, (III), 5‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–N,N‐dimethylformamide (2/2/1), (IV), 2C₅H₆N₂OS·2C₄H₆N₄O·C₃H₇NO, (IV), 5‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–N,N‐dimethylacetamide (2/2/1), 2C₅H₆N₂OS·2C₄H₆N₄O·C₄H₉NO, (V), and 5‐methyl‐2‐thiouracil–melamine (3/2), 3C₅H₆N₂OS·2C₃H₆N₆, (VI). Synthon 3s_{N·S;N·N;N·O} was formed in three structures in which two‐dimensional hydrogen‐bonded networks are observed, while doubly hydrogen‐bonded interactions were formed instead in the remaining three cocrystals whereby three‐dimensional networks are preferred. As desired, the S atoms are involved in hydrogen‐bonding interactions in all six structures, thus illustrating the ability of sulfur to act as a hydrogen‐bond acceptor and, therefore, its value for application in crystal engineering.     

Synthesis of new 5‐acetyl(arylmethyliden)‐4‐thiazolidones

A new approach to the synthesis of new heterocyclic compounds with triazine and 4‐thiazolidone fragments in one molecule is developed. The synthesis methods comprise [2+3]‐cyclocondensation reactions essential in the preparative synthesis of 4‐thiazolidone derivatives. The reactions of S,N‐nucleophiles with C₂‐cyclization agents for the synthesis of a number of biologically active 2‐triazin‐4‐thiazolidones were investigated. The interaction of thiosemicarbazone of sym‐triazine with derivatives of α‐halogencarboxylic acids and maleic anhydride resulted in correspondent (2‐[2‐(4,6‐dichloro‐1,3,5‐triazin‐2‐yl)hydrazino]‐5‐(3,4,5‐ R‐p‐phenyl‐methyliden)‐1,3‐thiazol‐4‐ones obtained in the one‐step synthesis. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:392–396, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20631     

Bis(1,3,5‐triazine‐2,4,6‐triamine‐κN1)silver(I) nitrate

The title compound, [Ag(C₃H₆N₆)₂]NO₃, has an alternating two‐dimensional bilayer structure supported by extensive hydrogen bonds. The [Ag(melamine)₂]⁺ cationic monomers (melamine is 1,3,5‐triazine‐2,4,6‐triamine) are connected via N—H...N hydrogen bonds to form two‐dimensional sheets. Nitrate groups are sandwiched between two sheets through N—H...O hydrogen bonds. An almost perfectly linear coordination geometry is found for the Ag^I ions. The triazine ligands are slightly distorted due to π–π interactions.     

Original recyclization of S‐phenacyl derivatives of 4‐acylamino‐2‐mercapto‐1,3‐oxazoles and their analogues

Readily accessible acylamino(chloro)acetophenones, if treated with sodium rhodanide and α‐halogenocarbonyl compounds, provide 4‐acylamino‐5‐aryl‐2‐mercapto‐1,3‐oxazole derivatives which undergo recyclization on heating in polyphosphoric acid to give substituted 1,3‐thiazol‐2(3H)‐ones or 1,3‐thiazolidin‐2,4‐diones containing 2‐alkyl(aryl)‐5‐aryl‐1,3‐oxazol‐4‐yl residues at the N³ atom. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:432–437, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20317     

Photopolymerization reactions initiated by a visible light photoinitiating system: Cyanine dye/borate salt/1,3,5‐triazine

New three‐component photoinitiating systems consisting of a cyanine dye, borate salt, and a 1,3,5‐triazine derivative were investigated by measuring their photoinitiation activities and through fluorescence quenching experiments. Polymerization kinetic studies based on the microcalorimetric method revealed a significant increase in polymerization rate when the concentration of n‐butyltriphenylborate salt or the 1,3,5‐triazine derivative were increased. The photo‐induced electron transfer process between electron donor and electron acceptor was studied by means of fluorescence quenching and SrEt change of the fluorescence intensity. The experiments performed documented that an increase of the n‐butyltriphenylborate salt concentration dramatically increases the rate of dye fluorescence quenching, whereas the increasing of the 1,3,5‐triazine derivative concentration slows down the consumption of the dye. We conclude that the primary photochemical reaction involves an electron transfer from the n‐butyltriphenylborate anion to the excited singlet state of the dye, followed by the reaction of the 1,3,5‐triazine derivative with the resulting dye radical to regenerate the original dye. This reaction simultaneously produces a triazinyl radical anion derived from the 1,3,5‐triazine, which undergoes the carbon‐halogen bond cleavage yielding radicals active in initiation of a free radical polymerization chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3626–3636, 2007     

The peptide NCbz‐Val‐Tyr‐OMe and aromatic π–π interactions

The peptide N‐benzyloxycarbonyl‐L‐valyl‐L‐tyrosine methyl ester or NCbz‐Val‐Tyr‐OMe (where NCbz is N‐benzyloxycarbonyl and OMe indicates the methyl ester), C₂₃H₂₈N₂O₆, has an extended backbone conformation. The aromatic rings of the Tyr residue and the NCbz group are involved in various attractive intra‐ and intermolecular aromatic π–π interactions which stabilize the conformation and packing in the crystal structure, in addition to N—H...O and O—H...O hydrogen bonds. The aromatic π–π interactions include parallel‐displaced, perpendicular T‐shaped, perpendicular L‐shaped and inclined orientations.