Transparent film materials with excellent mechanical and thermal properties were elaborated by drying a latex suspension of armored polymer/Laponite composite particles. Low‐temperature TEM observation of ultrathin cross‐sections of the films indicated a unique network morphology characterized by a “honeycomb” distribution of the Laponite platelets remindful of the original particles morphology.
A new route to synthesize amphiphilic core–shell particles that consist of well‐defined hydrophobic polymer cores and poly(vinylamine) (PVAm) shells has been developed. The PVAm was treated with a small amount of tert‐butyl hydroperoxide to generate free radicals that subsequently initiated both graft‐ and homo‐polymerization of vinyl monomer such as n‐butyl acrylate, methyl methacrylate, and styrene. Stable particles in the range from 100 to 250 nm in diameter with very narrow size distributions (polydispersity index between 1.08 and 1.15) were produced in high yields. TEM images of the particles revealed that they had well‐defined core–shell nanostructures with thick and hairy PVAm shells. The structures of the vinyl monomer and water‐soluble polymer were found to strongly influence the formation of particles and their sizes.
Specific losses of water are observed from the molecular anions of monoximes of α-diketones. Labelling studies, kinetic energy release values and the +E spectra of ions have been used to aid in the elucidation of the fragmentation pathways. It is proposed that the majority of ions have α-keto nitrile structures. 相似文献
The use of a photocatalyst (tris(2‐phenylpyridine)iridium [Ir(ppy)3]) being able to generate both radicals and cations to initiate free radical polymerization and ring opening polymerization is presented. Remarkably, under soft irradiations (fluorescence bulb, sunlight), excellent cationic polymerization profiles and final conversions are obtained. The involved mechanisms are investigated by ESR experiments.
Dissipative mechanisms occurring at the interface between multiwall nanotubes (MWCNT) and an elastomeric matrix are investigated and quantitatively predicted through analytical equations derived from a micromechanical model. The effects of MWCNT aspect ratio on dissipative properties of the reinforced system are investigated at high strains (100–300%). Cyclic tensile tests illustrate that the fraction of dissipated strain energy increases with the amount of MWCNT and varies with their aspect ratio. Lower mean diameter MWCNT are able to dissipate a higher amount of strain energy. The model developed on the basis of the shear lag theory correctly predicts the dissipated strain energy at high strains, taking into account the different contributions to the mechanical behavior of nanotubes' different aspect ratios.
The polymerization behavior of phenolic azosulfonates and triazene by means of enzymatic polymerization using horseradish peroxidase was studied. While for the latter one, only oligomerization was observed, sodium 4‐hydroxybenzenediazosulfonate was successfully homopolymerized. The obtained polymer had an average molecular weight of Mn = 3 000 with a polydispersity index of 1.51. This is the first example of a homopolymer bearing an azosulfonate function in every monomer unit.
Summary: The interactions between poly{(2,6‐pyridinylenevinylene)‐co‐[(2,5‐dioctyloxy‐p‐phenylene)vinylene]} (PPyPV) and SWNTs have been investigated using UV‐Vis absorption spectroscopy. The SWNTs promoted polymer organization. PPyPV is a Lewis base and can be doped by strong and weak Lewis acids. The basicity strength of the PPyPV depended on the polymer interchain interactions, which were enhanced by the presence of SWNTs. As the SWNT concentration was increased, an increment in the Kb of PPyPV was observed.
Water‐soluble single‐ and multi‐walled carbon nanotubes (CNTs) were prepared by grafting polyacrylamide chains from the graphitic surface via ceric ion‐induced redox radical polymerization. The reducing functionalities were covalently attached to the tubes by peroxide‐assisted radical reaction. The results showed that polymer chains were grafted onto CNTs by the redox process. The redox radical polymerization initiated by carbon nanotube‐bearing functionalities not only provides a powerful strategy for modifying the carbon nanostructures but also gives us the knowledge of their sidewall chemistry.
Sixteen parallel polymerization reactions of 2‐ethyl‐2‐oxazoline have been performed at different temperatures in an automated synthesizer that allowed individual heating of each reactor. During the reactions samples were taken automatically, which were characterized by means of both online GPC and offline GC, in order to optimize the reaction temperature and to determine the activation energy of the polymerization.
A novel method of macromolecule encapsulation using micron‐sized polymeric shells constructed with a photoactive azobenzene containing polyelectrolyte is discussed. Fluorescently labeled dextran molecules were encapsulated using light to remotely shrink and change the wall permeability of new polymeric hollow shells. We observed that the proportion of shells with dye encapsulated increased along with the duration of irradiation. Electron microscopy imaging illustrated significant changes in the surface roughness of shells after being exposed to light. Finally, this new system was shown to possess a high thermal stability.
This article provides a comprehensive review of the synthesis, properties and applications of organometallic polymers of the transition metals. The different classes of organometallic polymers are described according to their structural make‐up, as well as by their methods of synthesis. A number of examples of each class are given to emphasize the richness and diversity in these areas of research. In addition to linear polymers, hyperbranched, crosslinked, star and dendritic polymers are also described. The properties that transition metal‐containing organometallic polymers possess, as well as the applications that these materials have found in various domains are highlighted.
A branched copolymer containing a degradable polyperoxide linkage at a branching point was synthesized by the radical copolymerization of dienyl‐functionalized polystyrene and polyisoprene macromonomers with molecular oxygen. The ternary mixture of the branched copolymer and the macromonomers showed phase‐separated structure after annealing at 45 and 90 °C. The adjacent spacing of the phase‐separated structure was in the order of submicron to micrometer, which is larger than that of general microphase separated structures, due to the presence of homopolymers (macromonomers). Annealing at 110 °C induced thermal decomposition of the polyperoxide followed by in‐situ collapse and a drastic morphology change in the phase‐separated structure.
An amylose‐grafted chitosan has been synthesized by a chemoenzymatic method according to the following two reactions. First, maltoheptaose is introduced to chitosan by a reductive amination using sodium cyanotrihydroborate in a mixed solvent of 1.0 mol · L−1 aqueous acetic acid and methanol at room temperature to produce a maltoheptaose‐grafted chitosan that has a well‐defined molecular structure. A phosphorylase‐catalyzed enzymatic polymerization of α‐D ‐glucose 1‐phosphate is then performed from the maltoheptaose‐grafted chitosan to obtain the amylose‐grafted chitosan. This material does not dissolve in any solvent, e.g., aqueous acetic acid and dimethyl sufoxide, which are good solvents for chitosan and amylose, respectively.
The effect of the molar volume on the mechanical properties of three polymers is computed using molecular mechanics. It is demonstrated that elastic properties significantly depend on the molar volume. To be reproducible they must be determined for a series of “stable” glassy configurations for which the potential energy is minimized not only according to the coordinates but also to the molar volume. If these conditions are not fulfilled, a great disparity in values between experiment and simulation is observed. The procedure is first applied to PVC. It is then argued that coherent results stemming from the application of this approach to both tacticities of PMMA justifies its application toward other polymers.
