Synthesis and self‐assembly behavior study of α,ω‐dicarboxyl‐poly(ethylene glycol)–permethyl‐6‐amino‐6‐deoxy‐β‐cyclodextrin‐monoamide: A new β‐cyclodextrin conjugate

A new type of amphiphilic macromolecule was synthesized through the attachment of a poly(ethylene glycol) chain to a permethyl‐amino‐β‐cyclodextrin ring. The structure of the product was studied with 1D and 2D NMR experiments and with MALDI‐TOF MS. The resulting comet‐shaped molecule showed self‐assembly behavior in polar solvents. The presence of supramolecular structures in aqueous media was detected with dynamic light scattering and proven also by 2D NOESY and DOSY experiments. The supramolecular structures that formed could serve as starting materials for new types of drug delivery bioconjugates containing two independent dopable sites, that is, the cyclodextrin ring and the core of the supramolecular structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5149–5155, 2007     

Crosslinkable Vesicles Self‐Assembled by Amphiphilic Hyperbranched Polyester

Summary: Amphiphilic hyperbranched polyester (H20‐AM) with methacrylate end groups was synthesized based on hyperbranched aliphatic polyester (Boltorn™ H20). Narrow‐dispersed crosslinkable vesicles were obtained by dissolving H20‐AM in water, and characterized by laser light scattering and TEM. The hollow structural vesicle is composed of around 350 H20‐AM molecules, having a radius of around 40 nm and of 1.9 × 10⁶ g · mL⁻¹. The vesicles were fixed by crosslinking of methacrylate groups to form shape‐persistent structures.

TEM images of the crosslinked vesicles at lower magnification.     

Fabrication of Mussel‐Inspired Highly Adhesive Honeycomb Films Containing Catechol Groups and Their Applications for Substrate‐Independent Porous Templates

Porous surface patterns are used in a wide variety of practical applications. Honeycomb‐patterned porous polymer films are good templates for preparing porous surfaces due to their simple fabrication and the arrangement of pores on the surface. Catechol groups include in adhesive protein of mussels have attracted much attention due to their highly and substrate‐independent adhesive properties. In this paper, highly and substrate‐independent adhesive honeycomb‐patterned porous polymer films are prepared by using amphiphilic copolymer having catechol moieties. Furthermore, porous surface patterns are transferred on various organic or inorganic substrates by wet etching with using adhesive honeycomb films as templates.

     

Synthesis of double‐hydrophilic block copolymers via combination of oxyanion‐initiated polymerization and polymer reaction for fabricating magnetic target gene carrier

In this work, we have synthesized a polycation and a polyanion via a combination of oxyanion‐initiated polymerization and polymer reaction, and then developed a novel approach to prepare a controlled magnetic target gene carrier with magnetic Fe₃O₄ nanoparticles as core and poly(ethylene glycol) (PEG) segment as corona via layer‐by‐layer (LbL) assembly and shell‐crosslinking. Magnetic nanoparticles (MNPs) were first modified by poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) via radical polymerization. The resulting MNPs were used to compact deoxyribonucleic acid (DNA) through LbL assembly, involving four steps: ( 1 ) the binding of DNA to the polycation PDMAEMA on the surface of MNPs; ( 2 ) the produced particles in Step 1 with negative charge interacting with additional polycation ethoxy group end‐capped PDMAEMA (EtO‐PDMAEMA) homopolymer, leading to a positive charge surface; ( 3 ) using carboxyl group (‐COO^‐) of poly(methacrylic acid) (PMAA) in a diblock copolymer (MePEG2000‐b‐PMAA_SH) as polyanion, which has partial mercapto groups (‐SH) in PMAA segment, to interact with the particles produced in Step 2; ( 4 ) the shell of the composite nanoparticle was crosslinked by oxidizing the ‐SH groups of the MePEG2000‐b‐PMAA_SH to form disulfide linkage (S? S). All the processes of LbL assembly were investigated by agarose gel retardation assay and zeta potential measurements. The in vitro cytotoxicity analysis proves that polyions/DNA MNPs have excellent properties and potential applications as gene carriers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Crosslinkable poly(p‐phenylenevinylene) derivative

To simplify the fabrication of multilayer light‐emitting diodes, we prepared a p‐phenylenevinylene‐based polymer capped with crosslinkable styrene through a Wittig reaction. Insoluble poly(p‐phenylenevinylene) derivative (PPVD) films were prepared by a thermal treatment. The photoluminescence and ultraviolet–visible (UV–vis) absorbance of crosslinked films and noncrosslinked films were studied. We also studied the solvent resistance of crosslinked PPV films with UV–vis absorption spectra and atomic force microscopy. Double‐layer devices using crosslinked PPVD as an emitting layer, 2‐(4‐tert‐butylphenyl)‐5‐phenyl‐1,3,4‐oxadiazole (PBD) in poly(methyl methacrylate) as an electron‐transporting layer, and calcium as a cathode were fabricated. A maximum luminance efficiency of 0.70 cd/A and a maximum brightness of 740 cd/m² at 16 V were demonstrated. A 12‐fold improvement in the luminance efficiency with respect to that of single‐layer devices was realized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2124–2129, 2004     

Photo‐triggered microgel aggregation using o‐nitrobenzaldehyde as aggregating power source

In this work, cationic and anionic microgels which are mainly formed from thermal responsive polymer, poly(N‐isopropylacrylamide), are prepared and mixed in water. These microgels interact with each other due to the electrostatic interaction, and aggregate voluntarily. By applying the microgel aggregating system, photo‐responsive aggregating system is constructed by using o‐nitrobenzaldehyde (NBA), which reacts and releases hydrogen triggered by photo stimuli. The microgel aggregates in an aqueous solution of NBA re‐disperse depending on the irradiation time of UV light. In addition, by masking the UV irradiated area, the resultant shapes of microgel aggregates are controlled. The aggregated microgel shows rapid and drastic volume changes in response to heat. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1317‐1322     

Self‐assembly of di‐ and triblock PEG‐pentavaline amphiphiles

Nanoparticles formed from amphiphilic block copolymers can be used as drug delivery vehicles for hydrophilic therapeutics. Poly(ethylene glycol) (PEG)‐peptide copolymers were investigated for their self‐assembling properties and as consequent potential delivery systems. Mono‐ and dihydroxy PEGs were functionalized with a pentavaline sequence bearing Fmoc end groups. The molecular weight of the PEG component was varied to evaluate copolymer size and block number. These di‐ and tri‐block copolymers readily self‐assemble in aqueous solution with critical aggregation concentrations (CACs) of 0.46–16.29 μM. At concentrations above the CAC, copolymer solutions form spherical assemblies. Dynamic light scattering studies indicate these aggregates have a broad size distribution, with average diameters between 33 and 127 nm. The copolymers are comprised β‐conformations that are stable up to 80 °C, as observed by circular dichroism. This peptide secondary structure is retained in solutions up to 50% MeOH as well. The triblock copolymers proved to be the most stable, with copolymers synthesized from 10 kDa PEG having the most stable particles. Loading of carboxyfluorescein at 2–5 mol % shows that these copolymers have the potential to encapsulate hydrophilic drugs for delivery applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chemistry of Crosslinking Processes for Self‐Healing Polymers

Recent developments in material design have seen an exponential increase of polymers and polymer composites that can repair themselves in response to damage. In this review, a distinction is made between extrinsic materials, where the self‐healing property is obtained by adding healing agents to the material to be repaired, and intrinsic materials, where self‐healing is achieved by the material itself through its chemical nature. An overview of the crosslinking chemistries used in self‐healing materials will be given, discussing the advantages and drawbacks of each system. The review is not only aiming to enable researchers to compare their ongoing research with the state‐of‐the‐art but also to serve as a guide for the newcomers, which allows for a selection of the most promising self‐healing chemistries.     

Photo‐alignment material with azobenzene‐functionalized polymer linked in film

Application of a new azo‐polymer as a photo‐alignment material for liquid crystals (LCs) was demonstrated. 4‐(Vinyloxyethyloxy)azobenzene (VAZO), which has thermally reactive vinyl ether groups, reacted with the ? OH groups of poly(4‐hydroxystyrene) (PHS) during the baking process. The azo‐attached polymer (PHS‐VAZO) film showed anisotropic spectra after exposure to 365‐nm linear polarized light (LPL) unlike the VAZO‐doped poly(methylmethacrylate) (PMMA) film. The anisotropy of the film was small at high concentration of the azo‐chromophore because of thermal randomization of the polarized state. In the evaluation of photo‐alignment of the LC, the LC hybrid cell using the PHS‐VAZO film achieved high LC alignment. The azo‐attached polymer using the thermal reaction of vinyl ethers is useful for a photo‐alignment material. Copyright © 2002 John Wiley & Sons, Ltd.     

Fabrication of a Metal Particle Array Based on a Self‐Assembled Template from a Two‐Armed Polymer

A two‐armed polymer with a crown ether core self‐assembles to produce macroporous films with pores perpendicularly reaching through the film down to the substrate. A possible assembling mechanism is discussed. The pore size can be conveniently adjusted by changing the solution concentration. These through‐hole macroporous films provide a template for fabricating an array of Cu nanoparticle aggregates.

     

Towards the Generation of Self‐Healing Materials by Means of a Reversible Photo‐induced Approach

Photo‐induced reversibility as a tool for self‐healing: a reversible photo‐induced dendritic macromonomer was synthesized and proven to form networks with different features depending on the crosslinking conditions. While networks formed from aqueous systems exhibited a reversible change in their crosslinking degree, networks generated in bulk underwent fully reversibility. The latter was then exploited for generating self‐healing materials by means of a photo‐induced treatment.

     

Solid‐State Scrolls from Hierarchical Self‐Assembly of T‐Shaped Rod–Coil Molecules

On a roll : Attachment of flexible coils to the middle of a rigid rod generates T‐shaped rod–coil molecules that self‐assemble into layers that roll up to form filled cylindrical and hollow tubular scrolls, depending on the coil length, in the solid state (see picture); the rods are arranged parallel to the layer plane.

     

Quadrangular Prism: A Unique Self‐Assembly from Amphiphilic Hyperbranched PMA‐b‐PAA

The novel hyperbranched poly(methyl acrylate)‐block‐poly(acrylic acid)s (HBPMA‐b‐PAAs) are successfully synthesized via single‐electron transfer‐living radical polymerization (SET‐LRP), followed with hydrolysis reaction. The copolymer solution could spontaneously form unimolecular micelles composed of the hydrophobic core (PMA) and the hydrophilic shell (PAA) in water. Results show that the size of spherical particles increases from 8.18 to 19.18 nm with increased pH from 3.0 to 12.0. Most interestingly, the unique regular quadrangular prisms with the large microstructure (5.70 μm in length, and 0.47 μm in width) are observed by the self‐assembly of unimolecular micelles when pH value is below 2. Such self‐assembly behavior of HBPMA‐b‐PAA in solution is significantly influenced by the pH cycle times and concentration, which show that increased polymer concentration favors aggregate growth.

     

Electrically driven self‐healing polymers based on reversible guest–host complexation of β‐cyclodextrin and ferrocene

A multifunctional ferrocene‐modified poly(glycidyl methacrylate) (PGMA‐Fc) and a difunctional β‐cyclodextrin derivative (bis‐CD) has been prepared for the construction of an electrically driven removable and self‐healing polymeric materials based on the complexation reaction between ferrocene and β‐CD groups. The chemical structures of PGMA‐Fc and bis‐CD have been characterized with Fourier transform infrared, ¹H nuclear magnetic resonance, and X‐ray photoelectron spectroscopy. The effects of electrical voltages and medium conductivity on the decrosslinking efficiency of the crosslinked PGMA‐Fc/CD polymer have been examined. The PGMA‐Fc/CD network has shown removable feature and properties for application as a reworkable crosslinked material. Moreover, the crosslinked PGMA‐Fc/CD sample has shown electrically driven self‐healing behavior. The self‐healing performance could be enhanced with wetting the sample to increase the electrical conductivity. As a result, the material could serve as a self‐healing agent for commercial painting products. Preparation and application of a novel and efficient self‐healing polymer have been demonstrated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3395–3403     

Biocompatible Micelles Based on Comb‐like PEG Derivates: Formation,Characterization, and Photo‐responsiveness

A novel comb‐like derivative CPEG‐g‐DNQ was prepared by incorporating light responsive 2‐diazo‐1,2‐naphthoquinone (DNQ) groups into the structure of comb‐like poly(ethylene glycol) (CPEG). DLS and TEM results showed that CPEG‐g‐DNQ self‐assembled into spherical micelles with an average size of about 135 nm in water. Upon exposure to light, the micelles could be disrupted because of the conversion of hydrophobic DNQ to hydrophilic 3‐indenecarboylic acid. Additionally, hydrophobic coumarin 102 was successfully loaded into the micelles and photo‐induced ON‐OFF release was demonstrated by fluorescence spectroscopy. MTT assay revealed that the micelles are biocompatible. These photo‐responsive micelles might have great potential for controlled release of hydrophobic drugs.

     

Dual Photo‐functionalized Amphiphile for Photo‐reversible Liquid Crystal Alignments

Without the conventional polymer‐based liquid crystal (LC) alignment process, a newly synthesized dual photo‐functionalized amphiphile (abbreviated as ADMA₁) was successfully applied as a robust photo‐reversible LC alignment layer by self‐assembly and photo‐polymerization. The LC alignment layer constructed by directly adding dual photo‐functionalized amphiphiles into LC media significantly cuts the manufacturing cost as well as opens new doors for the fabrication of novel electro‐optical devices.     

An Efficient and Modular Route to Sequence‐Defined Polymers Appended to DNA

Inspired by biological polymers, sequence‐controlled synthetic polymers are highly promising materials that integrate the robustness of synthetic systems with the information‐derived activity of biological counterparts. Polymer–biopolymer conjugates are often targeted to achieve this union; however, their synthesis remains challenging. We report a stepwise solid‐phase approach for the generation of completely monodisperse and sequence‐defined DNA–polymer conjugates using readily available reagents. These polymeric modifications to DNA display self‐assembly and encapsulation behavior—as evidenced by HPLC, dynamic light scattering, and fluorescence studies—which is highly dependent on sequence order. The method is general and has the potential to make DNA–polymer conjugates and sequence‐defined polymers widely available.