Efficient Usage of Thiocarbonates for Both the Production and the Biofunctionalization of Polymers

End group modification of polymers prepared by reversible addition–fragmentation chain transfer (RAFT) polymerization was accomplished by conversion of trithiocarbonate into reactive functions able to conjugate easily with biomolecules or bioactive functionality. Polymers were prepared by RAFT, and subsequent aminolysis led to sulfhydryl‐terminated polymers that reacted in situ with an excess of dithiopyridyl disulfide to yield pyridyl disulfide‐terminated macromolecules or in the presence of ene to yield functional polymers. In the first route, the pyridyl disulfide end groups allowed coupling with oligonucleotide and peptide. The second approach exploited thiol–ene chemistry to couple polymers and model compounds such as carbohydrate and biotin with high yield.

     

Conjugation of siRNA with Comb‐Type PEG Enhances Serum Stability and Gene Silencing Efficiency

A thiol‐modified siRNA targeting the enhanced green fluorescence protein (eGFP) gene was conjugated with RAFT‐synthesized, pyridyl disulfide‐functional poly(PEG methyl ether acrylate)s (p(PEGA)s). siRNA‐p(PEGA) conjugates demonstrated significantly enhanced in vitro serum stability and nuclease resistance compared to the unmodified and thiol‐modified siRNA. The complexes of siRNA‐p(PEGA) conjugates with a fusogenic peptide, KALA ((+)/(–) = 2) inhibited the protein expression approximately 28‐fold more than the KALA complex of the unmodified siRNA. The protein inhibition caused by siRNA‐p(PEGA)‐KALA complexes (56 ± 5%–58 ± 3% of the fluorescence expressed in non‐treated cells) was comparable to the effect of the unmodified siRNA‐lipofectamine complex (77 ± 7%).

     

Novel Shape‐Memory Polymer with Two Transition Temperatures

Summary: This communication describes a novel kind of PMMA‐PEG semi‐interpenetrating network (semi‐IPN) which shows excellent shape‐memory behavior at two transition temperatures, the T_m of the PEG crystal and the T_g of the semi‐IPN. Based on a reversible order‐disorder transition of the crystals below and above the T_m of PEG, and the large difference in storage modulus below and above the T_g of the semi‐IPN, the polymer has a recovery ratio of 91 and 99%, respectively.

Shape‐memory phenomena of PMMA‐PEG2000 semi‐IPN.     

Facile Fabrication of Functional Polypyrrole Nanotubes via a Reactive Self‐Degraded Template

Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl₃ and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.

TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min.     

Thermoprecipitation of Glutathione S‐Transferase by Glutathione–Poly(N‐isopropylacrylamide) Prepared by RAFT Polymerization

Herein, we report an effective and rapid method to purify glutathione S‐transferase (GST) using glutathione (GSH)‐modified poly(N‐isopropylacrylamide) (pNIPAAm) and mild, thermal conditions. A chain transfer agent modified with pyridyl disulfide was employed in the reversible addition–fragmentation chain transfer (RAFT) polymerization of NIPAAm. The resulting polymer had a narrow molecular weight distribution (polydispersity index = 1.21). Conjugation of GSH to the pyridyl disulfide–pNIPAAm reached 95% within 30 min as determined by UV–Vis monitoring of the release of pyridine‐2‐thione. GST was successfully thermoprecipitated upon heating the GSH–pNIPAAm above the lower critical solution temperature (LCST). The pull down assay was repeated with bovine serum albumin (BSA) and T4 lysozyme (T4L), which demonstrated the specificity of the polymer for GST. Due to its simplicity and high efficiency, this method holds great potential for large‐scale purification of GST‐tagged proteins.

     

Supramolecular Network Based on the Self‐Assembly of γ‐Cyclodextrin with Poly(ethylene glycol) and its Shape Memory Effect

A novel supramolecular network has been prepared based on the formation of inclusion complexes between γ‐cyclodextrin and poly(ethylene glycol), in which the PEG chains are interlocked by γ‐CD rings. This PEG/γ‐CD network exhibits good shape memory behavior because of the crosslinked structure. The crosslinked PEG/γ‐CD inclusion complexes and PEG crystallites account for the fixing phase and reversible phase, respectively. The characteristics of the materials have been investigated by ¹H NMR spectroscopy, XRD, DSC, DMA, viscosity tests, and swelling measurements.

     

Computational Studies of RAFT Polymerization–Mechanistic Insights and Practical Applications

Summary: Computational chemistry is a valuable complement to experiments in the study of polymerization processes. This article reviews the contribution of computational chemistry to understanding the kinetics and mechanism of reversible addition fragmentation chain transfer (RAFT) polymerization. Current computational techniques are appraised, showing that barriers and enthalpies can now be calculated with kcal accuracy. The utility of computational data is then demonstrated by showing how the calculated barriers and enthalpies enable appropriate kinetic models to be chosen for RAFT. Further insights are provided by a systematic analysis of structure‐reactivity trends. The development of the first computer‐designed RAFT agent illustrates the practical utility of these investigations.

     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Generation of Hierarchical Topologies from Photocrosslinkable,Particle‐Stabilized Emulsions

Summary: We describe a way to obtain biomimetic, hierarchical surface morphologies. In order to mimic natural surfaces more accurately such as lotus leaves and gecko feet, we employ a strategy that bears many of the attractive characteristics of natural materials synthesis. The system in question consists of a photocurable monomer and water. To this quasi‐two‐component system we add polymer latex spheres. The monomer–water interface is then manipulated according to the well‐established science of complex fluids. Drawing from the rich phase behavior of particle‐stabilized emulsions, we demonstrate the creation of complex biomimetic morphologies over many length scales. The resulting structures are then solidified by crosslinking the monomer with UV light.

Comparison of an AFM image of a PMMA colloidosome assembly with that of the textured surface of a superhydrophobic Hygoryza aristata leaf (inset).     

Patterning Proteins on Surfaces of Cross‐Sectioned Multilayer Polymer Films

Summary: A new approach is introduced to create submicrometer patterned surfaces using multilayer polymer films that contain alternating layers of two polymers, linear low‐density polyethylene (LLDPE) and ethylene‐co‐(acrylic acid) copolymer (EAA). Patterned templates have been prepared by microtoming the multilayer molded sheets. Regionally confined chemical functionality is confirmed by grafting an amine‐terminated biotin and adsorbing streptavidin specifically on the alternating layers of EAA.

Fluorescence micrograph of the Alexa488‐streptadivin patterned polymer surface.     

RAFT Polymerization and Thiol Chemistry: A Complementary Pairing for Implementing Modern Macromolecular Design

Reversible addition fragmentation chain transfer (RAFT) polymerization is one of the most extensively studied reversible deactivation radical polymerization methods for the production of well‐defined polymers. After polymerization, the RAFT agent end‐group can easily be converted into a thiol, opening manifold opportunities for thiol modification reactions. This review is focused both on the introduction of functional end‐groups using well‐established methods, such as thiol‐ene chemistry, as well as on creating bio‐cleavable disulfide linkages via disulfide exchange reactions. We demonstrate that thiol modification is a highly attractive and efficient chemistry for modifying RAFT polymers.

     

Preparation of a Rapidly Forming Poly(ferrocenylsilane)‐Poly(ethylene glycol)‐based Hydrogel by a Thiol‐Michael Addition Click Reaction

The synthesis of a rapidly forming redox responsive poly(ferrocenylsilane)‐poly(ethylene glycol) (PFS‐PEG)‐based hydrogel is described, achieved by a thiol‐Michael addition click reaction. PFS bearing acrylate side groups (PFS‐acryl) was synthesized by side group modification of poly(ferrocenyl(3‐iodopropyl)methylsilane) (PFS‐I) and characterized by ¹H NMR, ¹³C NMR, and FT‐IR spectroscopy. The equilibrium swelling ratio, morphology, rheology, and redox responsive properties of the PFS‐PEG‐based hydrogel are reported.

     

Electrostatic Assembly of Poly(ethylene glycol) Nanotubes

Poly(ethylene glycol) (PEG)‐based films, nanotubes, and nanotube arrays were successfully made using layer‐by‐layer (LbL) assembly ion‐containing PEO derivatives on porous templates and planar substrates. PEG nanotubes are challenging to produce because PEG dissolves into solutions and solvents used during nanotube processing, but our techniques circumvent the issue. Nanotube dimensions were verified using microscopy and the average observed diameter was 155 nm. The PEG‐based structures showed remarkable stability in water, salt water, and sodium hydroxide solution.

     

Parametric Analysis of the Intermediate Concentration in a RAFT Polymerization and its Influence upon the Polymerization Kinetics

Summary: A kinetic analysis of living/controlled radical polymerizations in bulk mediated by RAFT is presented. The main objective is to show how the kinetics of the RAFT process and, in particular, of the RAFT intermediate radical is affecting the overall polymerization rate. Namely, three different cases are analyzed: (i) slow fragmentation of the RAFT intermediate; (ii) cross‐termination of the RAFT intermediate with other radicals; and (iii) slow re‐initiation of the RAFT agent leaving group. Simplified analytical formulas are derived for the time‐dependent concentrations of the involved species as well as for conversion. They are supported by numerical simulations and are qualitatively compared to literature experimental findings. Criteria are also given to judge the influence of the RAFT reaction kinetic rate constants on the different phenomena observed experimentally in RAFT polymerization, namely inhibition and retardation. Since these criteria are given by using non‐dimensional groups, they can be readily applied to a broad spectrum of experimental conditions.

Logarithmic non‐dimensional concentration for the radicals (r) and intermediate radicals (q) versus the non‐dimensional polymerization time ( ).     

Microwave‐Assisted Synthesis of Crosslinked Poly(vinyl alcohol) Nanocomposites Comprising Single‐Walled Carbon Nanotubes,Multi‐Walled Carbon Nanotubes,and Buckminsterfullerene

We report a facile method to accomplish the crosslinking reaction of PVA with SWNTs, MWNTs, and C‐60 using MW irradiation. Nanocomposites of PVA crosslinked with SWNT, MWNT and C‐60 were prepared expeditiously by reacting the respective carbon nanotubes with 3 wt.‐% PVA under MW irradiation, maintaining a temperature of 100 °C, representing a radical improvement over literature methods to prepare such crosslinked PVA composites. This general preparative procedure is versatile and provides a simple route to manufacture useful SWNT, MWNT and C‐60 nanocomposites.

     

Combining RAFT Radical Polymerization and Click/Highly Efficient Coupling Chemistries: A Powerful Strategy for the Preparation of Novel Materials

This paper highlights the powerful combination of reversible addition–fragmentation chain transfer (RAFT) radical polymerization and various click/coupling chemistries. This is not an exhaustive review but rather an overview demonstrating the impressive possibilities that the “marriage” of these two synthetic approaches offers in modern macromolecular design and synthesis.

     

Poly(2,5‐thienylene vinylene) in Nano Shapes by CVD Polymerization

Poly(2,5‐thienylene vinylene) (PTV), an insoluble conjugated polymer, can be readily prepared in various shapes of different nanodimensions by the chemical vapor deposition polymerization of 2,5‐bis(chloromethyl)thiophene. The bischloromethyl monomer in the vapor phase is activated at 600 °C. The activated monomer vapor is deposited at room temperature on the surface of various substrates to prepare polymeric films, fibers, tubes etc., which are then thermally converted into PTV. PTV thin films can be carbonized thermally to produce graphitic compositions that contain sulfur atoms. Electrical conductivities of FeCl‐doped PTV and carbonized films are reported.

     

Monte Carlo Simulation of the Reactive Formation of Co‐Continuous Nanostructured Polymers

Structure formation during high‐temperature reactive blending of randomly functionalized poly‐disperse backbone polymers (such as polyethylene) with end‐functionalized graft polymers (such as polyamide 6) forming co‐continuous nanostructured microphases was investigated by means of MC simulations using the bond fluctuation algorithm. We compared reacted and non‐reacted systems under the same conditions. For the non‐reacted system at low temperatures, phase separation was observed. In the system with grafting reactions, macroscopic phase separation was inhibited even if the consumption of reactive sites was only 50%. The calculated structure factor indicates a distinct difference between the two simulation states in accordance with the 3D visualization of the system and the box‐counting method.

     

Non‐Fouling Character of Poly[2‐(methacryloyloxy)ethyl Phosphorylcholine]‐Modified Gold Surfaces Fabricated by the ‘Grafting to’ Method: Comparison of its Protein Resistance with Poly(ethylene glycol)‐Modified Gold Surfaces

Poly[2‐(methacryloyloxy)ethyl phosphorylcholine] ‐modified gold surfaces, which have been newly prepared by a ‘grafting to’ method using a series of monosulfanyl‐terminated PMPC, are characterized by protein adsorption experiments based on surface plasmon resonance spectroscopy and ellipsometry measurements. The extent of BSA adsorption on PMPC‐modified surfaces was systematically reduced for thicker PMPC layers, thus the number of MPC units on the gold surface appears to be an important factor for the excellent protein resistance offered by PMPC‐modified gold surfaces fabricated by the ‘grafting to’ method, which is sharp contrast to that of PEG tethered chains.