聚苯胺共价接枝碳纳米管复合材料的制备及其超电容性能的研究

以氨基化的碳纳米管为基体, 通过低温原位聚合的方法将聚苯胺共价接枝于碳纳米管表面, 通过透射电镜(TEM)、X射线衍射(XRD)、紫外可见光(UV-vis)、傅里叶红外(FT-IR)、拉曼(Raman)及电化学方法对复合材料进行了表征. 结果表明通过低温原位聚合的方法可以使聚苯胺均匀接枝于碳纳米管表面. 电化学测试结果表明, 碳纳米管共价接枝聚苯胺作为超级电容器材料在0.5 A/g条件下聚苯胺的电容贡献值为754.8 F/g, 同时其倍率性能以及循环稳定性方面都明显优于聚苯胺非共价修饰的碳纳米管复合材料.     

聚乙酰苯胺修饰碳纳米管载铂催化剂对甲醇电催化氧化

以原位化学聚合的聚乙酰苯胺/多壁碳纳米管(PAANI-MWCNTs)复合纳米材料作为载体,采用硼氢化钠还原法将Pt纳米粒子担载到PAANI-MWCNTs复合纳米材料表面,制备了Pt/PAANI-MWCNTs复合纳米催化剂.样品的结构和形貌用紫外-可见(UV-Vis)光谱、拉曼光谱、扫描电镜(SEM)、透射电镜(TEM)和X射线衍射(XRD)进行了表征.结果表明,聚乙酰苯胺与碳纳米管之间存在较强的π-π相互作用,使其能牢固地吸附于多壁碳纳米管表面,对碳纳米管的结构完整性和导电性有一定的改善作用.同时,金属Pt纳米颗粒较为均匀地分散在PAANI-MWCNTs表面,粒径分布范围较窄.采用循环伏安法和计时电流法在酸性溶液中研究了Pt/PAANI-MWCNTs催化剂对甲醇的电催化氧化活性,结果表明Pt/PAANI-MWCNTs复合纳米催化剂比用混酸处理的碳纳米管载铂催化剂对甲醇呈现出更高的电催化氧化活性和更好的抗中毒能力及稳定性.     

聚氨酯接枝多壁碳纳米管的制备及表征

采用两步法成功地将聚氨酯分子链以共价键连接到碳纳米管表面. 首先将聚丙烯酰氯通过与强酸氧化后多壁碳纳米管表面产生的羟基及少量羧基之间的化学反应共价接枝到碳纳米管表面; 然后将接枝到碳纳米管表面的聚丙烯酰氯与端羟基聚氨酯发生酯化反应, 实现了聚氨酯对碳纳米管的表面共价接枝. 采用傅里叶变换红外光谱(FTIR)、透射电镜(TEM)、扫描电镜(SEM) 和热重分析(TGA)等对接枝后的产物进行了表征, 结果表明, 聚氨酯已共价接枝到碳纳米管表面, 被接枝的聚合物的含量接近90%.     

Pt-CeO_2/聚苯乙烯磺酸盐功能化碳纳米管复合物的制备及对甲醇的电催化氧化性能

通过阴离子聚合物聚苯乙烯磺酸钠(PSS)对碳纳米管(CNTs)进行非共价功能化修饰得到PSS功能化的碳纳米管(PSS-CNTs),利用带负电的PSS和Ce3+之间的静电作用将Ce3+组装到CNTs表面,再利用Ce3+与Pt Cl2-4之间存在的静电作用和氧化还原反应实现CeO_2和Pt纳米粒子在CNTs表面的原位沉积,得到复合催化剂Pt-CeO_2/PSS-CNTs.采用透射电子显微镜(TEM)、X射线衍射仪(XRD)、能谱仪(EDS)及拉曼光谱仪(Raman)等对催化剂进行了表征.电化学性能测试结果表明,由于PSS-CNTs表面原位沉积的Pt纳米粒子相对于在原始CNTs上沉积的Pt纳米粒子具有更小的粒径、更好的分散均匀性和稳定性,同时Pt与CeO_2之间存在良好的协同效应,Pt-CeO_2/PSS-CNTs催化剂对甲醇电催化氧化具有较好的催化活性和化学稳定性,当nPt/nCe=2/3时催化性能最优.     

Pt 纳米颗粒在聚二甲基二烯丙基氯化铵功能化碳纳米管上的自发沉积及其对甲醇的电氧化性能

利用聚二甲基二烯丙基氯化铵(PDDA)非共价修饰的碳纳米管(CNTs)与PtCl₆^2-之间的自发氧化还原作用, 制备了Pt 纳米颗粒(Pt NPs)/CNTs-PDDA复合催化剂. PDDA在该催化剂中具有三种作用: (1) 作为金属前驱体PtCl₆^2-还原为Pt NPs 的还原剂; (2) 作为原位产生的Pt NPs 的稳定剂; (3) 在CNTs 表面形成保护膜抑制CNTs 在甲醇电催化氧化过程中的腐蚀. 采用傅里叶变换红外(FTIR)光谱、热重分析和拉曼光谱对CNTs-PDDA进行了表征, 表明PDDA通过π-π作用已成功覆盖在CNTs 表面, 并且修饰过程没有导致CNTs 结构的破坏. 采用透射电子显微镜(TEM)对Pt NPs/CNTs-PDDA 催化剂进行了表征, 结果表明, Pt NPs 均匀地分散在CNTs上, 平均粒径约2 nm, 且粒径分布范围窄. 用循环伏安法、计时电流法进一步考察了Pt NPs/CNTs-PDDA催化剂在酸性介质中对甲醇的电催化氧化的性能. 电化学测试结果表明, 与原始CNTs 负载的Pt NPs催化剂相比,Pt NPs/CNTs-PDDA催化剂具有更高的电化学活性表面积、电催化质量比活性和稳定性.     

Au/Si 载体负载单层Pt 催化剂的制备及其电催化性能的研究

以Si 纳米粉为载体, 通过化学镀的方法在其表面部分沉积纳米Au 颗粒后, 再通过欠电位的方法在Au 颗粒表面沉积了单层及亚单层的Pt. 通过透射电子显微镜(TEM), 循环伏安(CV)等方法对所制备的Pt/Au/Si 催化剂进行了形貌及电化学性能的表征. 结果表明, 该单层Pt 覆盖的Au/Si 催化剂对于甲醇的质量电催化活性是商业E-TEK(Pt/C)的8 倍,相比于不同层数的Pt, 单层覆盖时Pt 的利用率最高, 该单层Pt 负载Au/Si 催化剂对于抑制CO 的中毒的性能也比商业E-TEK(Pt/C)有明显的提高.     

基于碳纳米管－聚苯胺纳米复合物的超级电容器研究

为了提高碳纳米管的比容, 采用化学原位聚合的方法在碳纳米管的表面包覆聚苯胺, 制备碳纳米管-聚苯胺纳米复合物. 运用TEM和IR对样品进行了表征. 通过循环伏安研究样品的电化学特性. 利用恒流充放电考察基于碳纳米管-聚苯胺复合物超级电容器的性能. 在相同实验条件下, 对碳纳米管进行了比较分析. 实验结果表明, 在电流密度为10 mA/cm²时, 碳纳米管和碳纳米管-聚苯胺复合物的比容分别为52和201 F/g. 基于碳纳米管-聚苯胺纳米复合物的超级电容器的能量密度达到6.97 Wh/kg, 并且具有良好的功率特性.     

有限域聚合法制备碳纳米管-聚苯胺复合材料及其电化学性能

通过有限域聚合法将聚苯胺(PANI)均匀地生长在碳纳米管(CNTs)表面, 得到CNTs-PANI纳米复合材料. 通过透射电子显微镜(TEM)、扫描电子显微镜(SEM)、傅立叶变换红外(FTIR)光谱对样品的形貌及成分进行表征. 将得到的复合材料组装成电化学超级电容器, 进行电化学的循环伏安和恒流充放电测试. 结果显示, 运用此有限域聚合法所制备的复合材料中PANI 可以非常均匀地包裹在CNTs表面, 复合材料的比容量可以达到117.7 F·g-1(有机电解液), 远远高于所用纯碳纳米管(25.0 F·g-1)和纯聚苯胺(65.0 F·g-1)的比容量, 从而表明有限域聚合法是一良好的纳米复合材料的制备方法.     

以切短多壁碳纳米管为载体制备高活性Pt/SCNT及PtRu/SCNT燃料电池催化剂

采用乙醇为助磨剂,利用球磨的方法将5-15μm长的多壁碳纳米管切短成长度约为200nm,并且分布较为均匀的短碳纳米管(SCNT).以SCNT为载体,采用有机溶胶法制得了含铂20%(w)的Pt/SCNT及PtRu/SCNT催化剂.实验发现:对于甲醇的阳极电氧化过程,以切短碳纳米管为载体的Pt/SCNT催化剂具有比相同条件制得的Pt/CNT催化剂高得多的催化活性,前者甲醇氧化峰电流密度是后者的1.4倍,并且远远高于商品的Pt/C催化剂.同时我们发现添加了钌的PtRu/SCNT具有比不含钌的催化剂更好的活性.采用X射线衍射(XRD)、透射电镜(TEM)、比表面积分析(BET)等方法对催化剂进行表征,结果表明,切短碳纳米管的晶相结构并未改变,但Pt/SCNT和PtRu/SCNT催化剂的比表面积和电化学活性得到了显著的提高.     

纳米三氧化钨修饰碳纳米管载铂催化剂对甲醇氧化的电催化性能

采用表面修饰技术将碳纳米管(CNT)表面羧基化, 通过羧基将钨离子基团修饰到碳纳米管的外表面, 再通过高温焙烧处理将钨离子基团氧化成WO₃, 成功合成了纳米WO₃/CNT复合物, 进一步还原Pt 的前驱体而得到Pt-WO₃/CNT复合催化剂. 采用X射线粉末衍射(XRD)和透射电镜(TEM)对样品的形貌和晶型结构进行了表征, 结果表明, Pt纳米粒子为面心立方晶体结构, 均匀地分布在WO₃修饰的碳纳米管表面. 采用循环伏安(CV)和计时电流法研究了在酸性溶液中Pt-WO₃/CNT催化剂对甲醇的电催化氧化活性, 结果表明WO₃修饰的碳纳米管载铂催化剂比用混酸处理的碳纳米管载铂催化剂对甲醇呈现出更高的电催化氧化活性和更好的稳定性.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.