Enzymatic degradation of polylactic acid is studied experimentally and analytically. Gel permeation chromatography profiles obtained before and after the enzymatic degradation of polylactic acid (PLA) were introduced into the analysis based on a mathematical model. Previously developed techniques were successfully adapted to the analysis of an initial value problem consisting of an endogenous depolymerization model and an initial condition, and an inverse problem to determine the degradation rate for which the solution of the initial value problem also satisfies a final condition. Those problems were solved numerically and numerical results are introduced. Degradabilities of PLA and polyvinyl alcohol are compared.
Two emerging material classes are combined in this work, namely polymeric carbon nitrides and microporous polymer networks. The former, polymeric carbon nitrides, are composed of amine‐bridged heptazine moieties and showed interesting performance as a metal‐free photocatalyst. These materials have, however, to be prepared at high temperatures, making control of their chemical structure difficult. The latter, microporous polymer networks have received increasing interest due to their high surface area, giving rise to interesting applications in gas storage or catalysis. Here, the central building block of carbon nitrides, a functionalized heptazine as monomer, and tecton are used to create microporous polymer networks. The resulting heptazine‐based microporous polymers show high porosity, while their chemical structure resembles the ones of carbon nitrides. The polymers show activity for the photocatalytic production of hydrogen from water, even under visible light illumination.
Summary: Two series of hyperbranched conjugated polymers were synthesized via an A3 + B2 type Wittig reaction. The molecular weights of the polymers were successfully tuned by simply changing the feed ratio of the monomers. Polymers with higher molecular weights presented more efficient photoluminescence, higher thermal stability and higher performance of LEDs.
Mixing a bis‐hydrophilic, cationic miktoarm star polymer with a linear polyanion leads to the formation of unilamellar polymersomes, which consist of an interpolyelectrolyte complex (IPEC) wall sandwiched between poly(ethylene oxide) brushes. The experimental finding of this rare IPEC morphology is rationalized theoretically: the star architecture forces the assembly into a vesicular shape due to the high entropic penalty for stretching of the insoluble arms in non‐planar morphologies. The transmission electron microscopy of vitrified samples (cryogenic TEM) is compared with the samples at ambient conditions (in situ TEM), giving one of the first TEM reports on soft matter in its pristine environment.
Block copolymers were prepared via RAFT polymerization with P(PEGMEMA) as the hydrophilic block to form micelles for the controlled delivery of ABZ. The group contribution method was used to estimate the partial solubility parameters for ABZ and various polymers as potential core‐forming block to achieve optimum compatibility. Different ratios between MMA and LMA, a non‐compatible monomer, were prepared. Cytotoxicity tests revealed a high toxicity of the ABZ‐loaded micelle resulting in 80% cell deaths at a micelle concentration of 10 µg · mL?1. Cellular uptake of micelles has been studied using fluorescently labeled micelles, showing that a large fraction of micelles is readily taken up by OVCAR‐3 cells. RGD‐conjugated micelles were prepared and showed an increased cellular uptake.
Monodispersed polystyrene beads incorporated with Fe3O4 nanoparticles are prepared via dispersion polymerization. The resultant magnetic beads present well‐defined composite structures, excellent colloidal stability, and strong magnetic response. The formation mechanism for the monodispersed composite beads, incorporated with preformed Fe3O4 nanocrystals, was investigated. The potential applications of the monodispersed magnetic beads in bacteria capturing were demonstrated. After being coated with anti‐Salmonella CSA‐1 antibody, the magnetic beads show capturing efficiencies of >99.4% in isolating Salmonella sp.
A class of cationic bottle‐brush polymers that show ionic strength‐dependent stimuli responsiveness is prepared. Brush polymers with norbornene as backbone and quaternary ammonium (QA)‐containing polycaprolactone copolymers as side chains are synthesized by a combination of ring‐opening metathesis polymerization, ring‐opening polymerization, and click reaction. In water with low ionic strength, brush polymers are soluble due to the strong electrostatic repulsion between cationic QA groups. As the addition of salt to increase ionic strength, single brush polymers undergo a transition from extended conformation to collapsed state and finally become insoluble in solution due to the screening effect of salts that yield the once‐dominant electrostatic interactions among QA species to hydrophobic–hydrophobic interactions.
Chlorine‐functionalized TEMPO‐capped polystyrenes were investigated using the matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) technique. Amine‐ and acrylate‐functionalized agents and bifunctional TEMPO‐capped polystyrene were also analyzed to demonstrate the applicability of this method. Using this technique allowed to analyze the conversion of the chlorine function to an acrylate function, which was previously difficult to detect with other methods.
MALDI‐TOF mass spectrum of a polystyrene described in this article, as obtained with DHB as the matrix. 相似文献
A simple method using water‐soluble conjugated polymers and a DNA intercalator has been proposed for single base pair mismatch detection with enhanced detection efficiency. Fluorescence resonance energy transfer (FRET) was used as an indicator for unwinding of dsDNA due to base pair mismatch at elevated temperatures. The optical amplification effect of the CPs helps to achieve enhanced detection efficiency.
Summary: Amphiphilic cylindrical brush‐coil block copolymers consisting of a polystyrene coil and a cylindrical brush block with poly(acrylic acid) side chains are prepared by ATRP of t‐butylacrylate from a block comacroinitiator. Upon acidolysis of the poly(t‐butylacrylate), water‐soluble polymers were obtained that were observed to form micelles consisting of 4–5 block copolymers on average in aqueous solution. The star‐like nature of such micelles was clearly visualized by scanning force microscopy.
Schematic of coil‐cylindrical brush block copolymer PS‐b‐(PiBEMA‐g‐PAA), its AFM image clearly showing the main chain and the PAA corona of the cylindrical brush block. 相似文献
Some new water‐soluble bis‐porphyrins, constituted of two porphyrin units spaced by means of aliphatic bridges of different lengths, were synthesized and characterized by MALDI‐TOF mass spectrometry, 1H NMR and UV‐vis spectroscopy. The hydrosolubility of these uncharged compounds was guaranteed from the presence of six long PEG chains bound on the peripheral positions of the two porphyrins. Cobalt and zinc derivatives were also prepared. In the case of Co‐bis‐porphyrin, the appearance of induced circular dichroism (ICD) signals in water solution confirmed the formation of stable complexes with some amino acids, in which the bis‐porphyrin behaves like molecular tweezers.
The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.
A facile two‐step synthesis for branched poly(isoprene)s (PI) based on polyaddition of ABn‐type macromonomers is described. The synthesis of the macromonomers was achieved by anionic polymerization of isoprene and subsequent end‐capping of the polymers by addition of chlorodimethylsilane to the living carbanions. This led to PI‐based macromonomers with narrow polydispersity ( / < 1.15) and molecular weights in the range of 1 700 – 22 100 g · mol−1. Synthesis of the branched polymers was carried out by a hydrosilylation‐based polymerization of the macromonomers. Characterization via SEC, SEC‐MALLS, coupled SEC‐viscosimetry and 1H‐NMR‐spectroscopy supported the formation of branched structures. Interestingly, these branched polymers exhibited α‐values that were similar to those reported for hyperbranched polymers based on AB2‐monomers.
Summary: Oligo(acrylic acid)s, produced by RAFT polymerization, have been separated and analyzed for the first time by capillary zone electrophoresis. The resolution obtained by capillary electrophoresis in borate buffers is far higher than that currently achieved using size exclusion chromatography. This work demonstrates that capillary electrophoresis is the technique of choice for the characterization of oligomers of acrylic acid and of other water‐soluble monomers involved in emulsion polymerization processes.
Electropherograms of different acrylic acid (AA) oligomers obtained by CZE. 相似文献
Nonlinear optical vinyl polymers with high glass transition temperature (Tg) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.
The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here. 相似文献
Novel conjugated carbazole polymers based on the alkyne‐linked 1,8‐carbazole structure are synthesized in high yield by the Sonogashira cross‐coupling reaction and acetylenic oxidative coupling reaction. The polymers are thermally stable and highly soluble in common organic solvents such as CHCl3, CH2Cl2, and THF. As compared to ethynylene‐linked polymer, the butadiynylene‐linked polymer display a bathochromic shift in the absorption maximum and end absorption position. In addition, the fluorescence behaviors in CH2Cl2 are almost identical for both polymers. Electrochemical measurements indicate that the ethynylene‐linked polymer possesses a lower first oxidation potential than the butadiynylene‐linked one.
