Synthesis of 5‐methyl‐4‐oxo‐2‐(coumarin‐3‐yl)‐N‐aryl‐3,4‐dihydrothieno[2,3‐d]‐pyrimidine‐6‐carboxamides

Possible approaches to synthesis of 5‐methyl‐4‐oxo‐2‐(coumarin‐3‐yl)‐N‐aryl‐3,4‐dihydrothieno[2,3‐d]pyrimidine‐6‐carboxamides 4 have been discussed. It is shown that the preferable approach is cyclization of 2‐iminocoumarin‐3‐carboxamides 1 , utilizing 5‐amino‐3‐methyl‐N²‐arylthiophene‐2,4‐dicarboxamides 2 as binucleophilic reagents. The proposed procedure allowed us to easily obtain 4 in two stages, using common reagents. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:341–346, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20303     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007     

Magnetic field effects on the polymerization of 6‐N,N‐dioctylamino‐1,3,5‐triazine‐2,4‐dithiol

Electrochemical polymerization of monosodium salt ( 1b ) of 6‐N,N‐dioctylamino‐1,3,5‐triazine‐2,4‐dithiol on stainless steels was investigated in zero (0T), perpendicular (5T⊥), and parallel (5T//) magnetic fields which are arranged perpendicular and parallel to the direction of electrolytic current. 5T⊥ magnetic field enhances the formation rate of poly(6‐N,N‐dioctylamino‐1,3,5‐triazine‐2,4‐disulfide) 2 films but suppresses the crystallinity of 2 . However, 5T// magnetic field enhances the formation rate and the crystallinity. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:60–64, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20257     

On the chemistry of 5‐aryl‐2‐hydrazino‐benzo[6,7]cyclohepta[1,2‐b]pyrido[2,3‐e] pyrimidin‐4‐one

Several pyrido[2,3‐e]pyrimidine fused with other rings have been prepared by intramolecular cyclization of 5‐(4‐chlorophenyl)‐2‐hydrazino‐benzo [6,7]cyclohepta‐[1,2‐b]pyrido[2,3‐e]pyrimidine‐4‐one ( 1 ) with acids, carbon disulfide to form triazole derivatives ( 2,4 ), halo‐ketones to give triazine derivative ( 5 ), β‐ketoesters, β‐cyanoesters, and β‐diketones to yield 2‐(1‐pyrazolyl) derivatives ( 7,9,10 ), and aldehydes to form arylhydrazone derivatives ( 11a,b ) which cyclized to form triazoles ( 12a,b ). Also, acyclic N‐nucleosides are prepared by heating under reflux 2‐hydrazino‐benzo[6,7]cyclohepta[1,2‐b]pyrido[2,3‐e] pyrimidin‐4‐one ( 1 ) with xylose and glucose to give the corresponding acyclic N‐nucleosides ( 13a,b ) which are cyclized to afford the corresponding protected tetra and penta–O‐acetate C‐nucleosides ( 14a,b ). Deacetylating of the latter nucleosides afforded the free acyclic C‐nucleosides ( 15a,b ). © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:34–43, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20248     

Synthesis and properties of polyimides derived from 1,4‐bis(4‐aminophenoxy)‐2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl) phenylene

A new phosphorus‐containing aromatic diamine, 1,4‐bis(4‐aminophenoxy)‐2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl) phenylene ( 3 ) was synthesized by the nucleophilic aromatic substitution of 2‐(6‐oxido‐6H‐dibenz[c,e] [1,2]oxaphosphorin‐6‐yl)‐1,4‐dihydroxy phenylene ( 1 ) with 4‐fluoronitrobenzene, followed by catalytic hydrogenation. Light color, flexible, and creasable polyimides with high molecular weight, high glass transition, high thermal stability, improved organosolubility, and good oxygen plasma resistance were synthesized from the condensation of ( 3 ) with various aromatic dianhydrides in N,N‐dimethylacetamide, followed by thermal imidization. The number‐average molecular weights of polyimides are in the range of 7.0–8.3 × 10⁴ g/mol, and the weight‐average molecular weights are in the range of 12.5–16.5 × 10⁴ g/mol. The T_gs of these polyimides range from 230 to 304 °C by differential scanning calorimetry and from 228 to 305 °C by DMA. These polyimides are tough and flexible, with tensile strength at around 100 MPa. The degradation temperatures (T_d 5%) and char yields at 800 °C in nitrogen range from 544 to 597 °C and 59–65 wt %, respectively. Polyimides 5c and 5e , derived from OPDA and 6FDA, respectively, with the cutoff wavelength of 347 and 342 μm, respectively, show very light color. These polyimides also exhibit good oxygen plasma resistance. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2897–2912, 2007     

Synthesis of 3‐arylazo‐6‐oxopyridazin‐5‐carbonitriles: A versatile precursor for condensed arylazopyridazin‐6‐ones

1‐[2‐Phenyl‐1‐diazenyl]‐1‐[2‐phenylhydrazono]acetone or 1‐[‐2‐(4‐methylphenyl)‐1‐diazenyl]‐1‐[‐2‐(4‐methylphenyl)hydrazono]‐butan‐2‐one were produced via coupling the (E) 2‐oxopropanal‐1‐phenyl‐hydrazone or (E) 2‐oxobutanal‐1‐(4‐methylphenyl)hydrazone with aromatic diazonium salts. These formazanes condensed readily with ethyl cyanoacetate to yield 5‐methyl‐3‐oxo‐2‐phenyl‐6‐phenylazo‐2,3‐dihydropyridazine‐4‐carbonitrile compound ( 9a ), 5‐ethyl‐3‐oxo‐2‐p‐tolyl‐6‐p‐tolylazo‐2,3‐dihydro‐pyridazine‐4‐carbonitrile and/or 5‐ethyl‐3‐oxo‐2,6‐di‐p‐tolyl‐2,3‐dihydropyridazine‐4‐carbonitrile that reacted with sulphur in presence of piperidine to yield the aminothienopyridazinones. The latter reacted with electron poor olefins and acetylenes to yield aminophthalazines. Compound ( 9a ) reacted also with benzylidenemalononitrile to yield the arylazophthalazinone.     

Facile Synthesis of Novel 3‐(4‐phenylisothiazol‐5‐yl)‐2H‐chromen‐2‐one Derivatives as Potential Anticancer Agents

A series of 3‐(4‐phenylisothiazol‐5‐yl)‐2H‐chromen‐2‐one ( 6a – l ) derivatives has been efficiently synthesized by straightforward sequential reactions. Tandem Vilsmeier Hack reaction/cyclization/bromination/Suzuki cross‐coupling reactions were successfully applied to the preparation of title compounds in good‐to‐high yields. In the synthetic sequences, 3‐chloro‐3‐(2‐oxo‐2H‐chromen‐3‐yl)acrylaldehydes ( 2 ) were found to react with ammonium thiocyanate to yield the corresponding 3‐(isothiazol‐5‐yl)‐2H‐chromen‐2‐ones ( 3 ). These derivatives were brominated with N‐bromo succinamide to yield the corresponding regioselective 3‐(4‐bromoisothiazol‐5‐yl)‐2H‐chromen‐2‐one ( 4 ). Finally, compound 4 was treated with various phenyl/pyrazole/7H –pyrrolo[2,3‐d]pyrimidinyl boronic acids 5a – l in the presence of K₂CO₃ and Pd catalyst in dimethylformamide to yield the corresponding title derivatives 6a – l . All the synthesized compounds were characterized by analytical and spectral studies. All the final compounds were screened against different cancer cell lines (A549, PC3, SKOV3, and B16F10), and among these compounds, 6b , 6g , 6h , and 6l displayed moderate cytotoxic activity against the tested cell lines.     

Chemoselective synthesis of thieno[3,2‐c][1,8]naphthyridin‐4(5H)‐ones by tandem cyclization

A number of the thieno[3,2‐c][1,8]‐naphthyridin‐4(5H)‐ones are chemoselectively synthesized from 4‐(4′‐aryloxybut‐2′‐ynylthio)‐1‐phenyl‐1,8‐naphthyridin‐2(1H)‐ones in 82–90% yield by the formation of sulfoxide, followed by [2,3] and [3,3]sigmatropic rearrangement and an intramolecular Michael addition. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:87–92, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20234     

Fabrication of poly(2‐oxy‐6‐naphthoyl) particles by direct polycondensation of 2‐hydroxy‐6‐naphthoic acid

Morphology control of poly(2‐oxy‐6‐naphthoyl) (PON) was examined by using reaction‐induced crystallization of oligomers during direct polycondensation of 2‐hydroxy‐6‐naphthoic acid with p‐toluenesulfonyl chloride and N,N‐dimethylformamide in pyridine. PON particles were obtained of which the diameter was in the range of 8.0–8.3 µm. The particles were comprised of many lamellae and exhibited spherulitic morphology. They possessed high crystallinity evaluated from wide‐angle X‐ray scattering (WAXS). Formation mechanism of the particles was clarified from the results of morphology observation, yield, density and WAXS. When the number average degree of polymerization of the oligomers exceeded a critical value of ca. 4–5, they were precipitated to form lamellae. The lamellae grew to spherulites through screw dislocation with continuous precipitation of the oligomer from the solution. Finally, further polymerization occurred gradually in the precipitates. Copyright © 2005 John Wiley & Sons, Ltd.     

The First Synthesis of (4S,5R,6R)‐5,6‐Dihydroxy‐4‐(prop‐1‐en‐2‐yl)cyclohex‐1‐ene‐1‐carboxylic Acid

A putative acid metabolite of a novel highly effective antiparkinsonian agent, (4S,5R,6R)‐5,6‐dihydroxy‐4‐(prop‐1‐en‐2‐yl)cyclohex‐1‐ene‐1‐carboxylic acid ( 5 ), was synthesized for the first time. Several synthetic approaches based on different transformations of O‐bearing monoterpenoids of the pinane and p‐menthane series were developed and tested in the course of the study. Acid 5 was synthesized starting from a commercially available monoterpenoid, (?)‐verbenone, in a total yield of 4.4% over eight steps.     

5‐Chloro‐3‐methylthio‐1,2,4‐thiadiazol‐2‐ium chlorides as useful synthetic precursors to a variety of 6aλ4‐thiapentalene systems

Title salts 3 were easily obtained by treatment of formimidoyl isothiocyanates 1 with a twofold excess of methanesulfenyl chloride. They showed interesting chemical behavior toward several nitrogen and carbon nucleophiles. Substitution reactions with isothioureas and acetamide in the presence of triethylamine gave the 1H, 6H‐6aλ⁴‐thia‐1,3,4,6‐tetraazapentalenes 7 and 6H‐6aλ⁴‐thia‐1‐oxa‐3,4,6‐triazapentalene 9 , respectively. Addition of p‐toluidine furnished the 5‐imino‐thiadiazole derivatives 10 , which reacted further with diverse heterocumulenes to yield the corresponding thiatriaza‐ and tetraazapentalene species 11 . The N,N′‐bis(1,2,4‐thiadiazol‐5‐ylidene)diaminobenzenes 13 were also prepared and reacted with phenyl isothiocyanate. Two stable rotational isomers were separated for the 1,2‐phenylene product 14b . Other π‐hypervalent sulfur compounds 16 were synthesized under similar conditions from salts 3 and methyl cyanoacetate or dimethyl malonate. The structural assignments were discussed on the basis of IR and NMR spectroscopic data and received additional support from X‐ray analysis of substrate 16a . © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:95–105, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10106     

Simple synthesis,photophysics, and electroluminescent properties of poly[2,7‐bis(4‐tert‐butylstyryl)fluorene‐9, 9‐diyl‐alt‐alkane‐α,ω‐diyl]

A simple synthetic route was used for the synthesis of a novel series of alternating copolymers based on substituted 2,7‐distyrylfluorene bridged through alkylene chains. First, 2,7‐dibromofluorene was reacted with 2 equiv of butyllithium, and this was followed by a treatment with 1 equiv of α,ω‐dibromoalkane to yield the intermediate, poly(2,7‐dibromofluorene‐9,9‐diyl‐alt‐alkane‐α,ω‐diyl). ( 1 ) Heck coupling of the latter with 1‐tert‐butyl‐4‐vinylbenzene afforded the target, poly[2,7‐bis(4‐tert‐butylstyryl)fluorene‐9,9‐diyl‐alt‐alkane‐α,ω‐diyl] ( 2 ). The two versions of 2 ( 2a and 2b which have hexane and decane, respectively, as alkane groups) were readily soluble in common organic solvents. Their glass‐transition temperature was relatively low (52 and 87 °C). An intense blue photoluminescence emission with maxima at about 408 and 409 nm was observed in tetrahydrofuran solutions, whereas thin films exhibited an orange emission with maxima at 569 and 588 nm. Very large redshifts of the photoluminescence maxima and Stokes shifts in thin films indicated strong aggregation in the solid state. Both polymers oxidized and reduced irreversibly. Single‐layer light‐emitting diodes with hole‐injecting indium tin oxide and electron‐injecting aluminum electrodes were fabricated. They emitted orange light with external electroluminescence efficiencies of 0.52 and 0.36% photon/electron, as determined in light‐emitting diodes made of 2a and 2b , with alkylenes of (CH₂)₆ and (CH₂)₁₀, respectively. An increase in the external electroluminescence efficiency up to 1.5% was reached in light‐emitting diodes made of polymer blends consisting of 2a and poly(9,9‐dihexadecylfluorene‐2,7‐diyl), which emitted blue‐white light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 809–821, 2007.     

Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

Polymerization of conjugated 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine with rhodium and palladium complexes

The monomer 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine was satisfactory obtained through the heterocoupling reaction of 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine and 4‐(5‐iodo‐1‐naphthyl)‐2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system, followed by acetone elimination. Poly{5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine} was obtained through the reaction of the acetylene monomer with homogeneous rhodium and palladium catalyst complexes. The structure of the polymers always showed a trans–cisoidal chain configuration on the basis of IR and NMR spectra. Moreover, only for the rhodium catalyst complex in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The mass determination of the polymers, by osmometry and gel permeation chromatography techniques, showed low average molecular weights. The kinetics of the catalyzed polymerization were analyzed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2038–2047, 2007     

Synthesis of polyallene‐based graft copolymer via 6‐methyl‐1,2‐heptadien‐4‐ol and styrene

A series of well‐defined graft copolymers with a polyallene‐based backbone and polystyrene side chains were synthesized by the combination of living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol and atom transfer radical polymerization (ATRP) of styrene. Poly(alcohol) with polyallene repeating units were prepared via 6‐methyl‐1,2‐heptadien‐4‐ol by living coordination polymerization initiated by [(η³‐allyl)NiOCOCF₃]₂ firstly, followed by transforming the pendant hydroxyl groups into halogen‐containing ATRP initiation groups. Grafting‐from route was employed in the following step for the synthesis of the well‐defined graft copolymer: polystyrene was grafted to the backbone via ATRP of styrene. The cleaved polystyrene side chains show a narrow molecular weight distribution (M_w/M_n = 1.06). This kind of graft copolymer is the first example of graft copolymer via allene derivative and styrenic monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5509–5517, 2007     

Synthesis and NMR characteristics of N‐acetyl‐4‐nitro,N‐acetyl‐5‐nitro,N‐acetyl‐6‐nitro and N‐acetyl‐7‐nitrotryptophan methyl esters

N‐acetyl‐4‐nitrotryptophan methyl ester (2), N‐acetyl‐5‐nitrotryptophan methyl ester (3), N‐acetyl‐6‐nitrotryptophan methyl ester (4) and N‐acetyl‐7‐nitrotryptophan methyl ester (5) were synthesized through a modified malonic ester reaction of the appropriate nitrogramine analogs followed by methylation with BF₃‐methanol. Assignments of the ¹H and ¹³C NMR chemical shifts were made using a combination of ¹H–¹H COSY, ¹H–¹³C HETCOR and ¹H–¹³C selective INEPT experiments. Copyright © 2008 Crown in the right of Canada. Published by John Wiley & Sons, Ltd     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

3/4‐phenylene bisheterocycles from ring transformation reaction of sydnone derivatives: Synthesis of 3‐[3/4‐heterocyclyl]phenyl‐5‐methyl‐3H‐[1,3,4]‐oxadiazol‐2‐ones from 3/4‐acetylphenylsydnones and their biological properties

The bifunctional 3/4‐[acetyl]phenylsydnones 1a, 1b were subjected to a one‐pot ring conversion to 3‐[3/4‐acetyl]phenyl‐5‐methyl‐3H‐[1,3,4]‐oxadiazol‐2‐ones 2a, 2b , which on further bromination yielded the 3‐[3/4‐bromoacyl]phenyl‐5‐methyl‐3H‐[1,3,4]‐oxadiazol‐2‐ones 3a, 3b . Reaction of these compounds with thiourea yielded the 3‐[3/4‐(2‐aminothiazol‐4‐yl)]phenyl‐5‐methyl‐3H‐[1,3,4]‐oxadiazol‐2‐ones 4a, 4b . The other thiazole derivatives 5a, 5b–7a, 7b were prepared by using thiosemicarbazide, thioacetamide, and thiobenzamide, respectively. In another reaction of the bromoacetyl compounds ( 3a, 3b ) with 2‐aminopyridine and 2‐aminothiazole, the fused biheterocyclic compounds 3‐[3/4‐imidazo‐[1,2‐a]pyridine‐2‐yl]phenyl‐5‐methyl‐3H‐[1,3,4]‐oxadiazol‐2‐ones 8a, 8b and 3‐[3/4‐imidazo‐[2,1‐b]‐thiazol‐6‐yl]phenyl‐5‐methyl‐3H‐[1,3,4]‐oxadiazol‐2‐ones 9a, 9b were obtained. The 3‐[3/4‐(benzofuran‐2‐carbonyl)]phenyl‐5‐methyl‐3H‐[1,3,4]‐oxadiazol‐2‐ones 10a, 10b were obtained by treatment of compounds 3a, 3b with o‐hydroxy benzaldehyde. Most of these compounds exhibited antifungal activity greater than the reference drugs used. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:50–54, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20255     

Preparation and characterization of optically active and organosoluble poly(amide‐imide)s from polycondensation reaction of N,N′‐(4,4′‐sulphonediphthaloyl)‐bis‐L‐isoleucine diacid with aromatic diamines

3,3′,4,4′‐Diphenylsulfonetetracarboxylic dianhydride (1) was reacted with L ‐isoleucine (2) in acetic acid and the resulting imide‐acid (3) was obtained in high yield. The diacid chloride (4) was prepared from the diacid derivative (3) by reaction with thionyl chloride. The polycondensation reaction of diacid chloride (4) with several aromatic diamines such as 4,4′‐sulfonyldianiline (5a), 4,4′‐diaminodiphenyl methane (5b), 4,4′‐diaminodiphenylether (5c), p‐phenylenediamine (5d),m‐phenylenediamine (5e), 2,4‐diaminotoluene (5f) and 4,4′‐diaminobiphenyl (5g) was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% of radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.23 to 0.41 dl/g were obtained with high yield. All of the earlier polymers were fully characterized by IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

3‐aryl‐6‐methoxy‐2‐oxo‐1,2‐dihydroquinoline‐4‐carbonitriles as Solvent and pH Independent Green Fluorescent Dyes

Highly fluorescent and stable 3‐aryl‐6‐methoxy‐2‐oxoquinoline‐4‐carbonitriles 6 (λ_exc = 408 nm and λ_em = 510 nm) were synthesized starting from appropriate arylmalonates 2 . Ring closure reaction with p‐anisidine gave 4‐hydroxyquinolones 3 , which could be bis‐chlorinated to yield quinolines 4 . Regioselective hydrolysis produced reactive 4‐chloroquinolones 5 , which were converted to green fluorescent 4‐cyano quinolones 6 using toluenesulfinates as catalysts.