Regio‐ and Stereochemistry in Propylene Polymerization Catalyzed with Bis(phenoxy‐imine) Zr and Hf Complexes/MAO Systems

End‐group analyses of the oligo‐ and polypropylenes produced with bis(phenoxy‐imine) Zr and Hf complexes with methylaluminoxane (MAO) indicate that the polymerization is initiated by two consecutive 1,2‐insertions and is terminated by a β‐H transfer following a 2,1‐insertion. Our data indicate that chain propagation occurs with prevailing 1,2‐regiochemistry but with considerable regioerrors, and with virtually no stereoselectivity.

The polymerization of propylene mediated by bis(phenoxy‐imine) Zr and Hf complexes with MAO.     

Bis(Phenoxy‐Imine) Zr Complexes/Et3Al/Heteropoly Compound Catalyst Systems for Ethylene Polymerization

Bis(phenoxy‐imine) Zr complexes upon activation with Et₃Al/(Ph₃C)_mH_n[PMo₁₂O₄₀] · 8 H₂O (average: m/n = 2:1) were demonstrated to be highly active catalysts for the polymerization of ethylene. One of the complexes formed narrow‐molecular‐weight distributed polyethylene ( 1.45) with a very high activity (5640 kg‐PE · mol‐cat⁻¹ · h⁻¹), representing the first example of a MAO‐ and borate‐free, highly active, single‐site catalyst system based on a Group 4 transition metal complex and a heteropoly compound.

Catalysis of ethylene with bis(phenoxy‐imine) Zr complexes activated with Et₃Al/(Ph₃C)_mH_n[PMo₁₂O₄₀] · 8 H₂O.     

Propylene Polymerization with Bis(phenoxy‐imine) Group‐4 Catalysts Using iBu3Al/Ph3CB(C6F5)4 as a Cocatalyst

The catalytic behavior of three bis(phenoxy‐imine) group‐4 transition‐metal complexes (M = Ti, Zr, Hf), with ⁱBu₃Al/Ph₃CB(C₆F₅)₄ cocatalyst systems towards propylene polymerization was investigated under atmospheric pressure at 25 °C. The Ti complex produced ultrahigh‐molecular‐weight atactic poly(propylene), whereas Zr and Hf complexes formed high‐molecular‐weight isotactic poly(propylene)s via a site‐control mechanism. The isotactic poly(propylene) obtained with the Hf complex displayed a high melting temperature of 123.8 °C.

     

Synthesis and characterization of Ni (II) complexes supported by phenoxy/naphthoxy‐imine ligands with pendant N‐ and O‐donor groups and their use in ethylene oligomerization

A series of new Ni(II) complexes of general formula Ni{ZNO} Br ( 2a‐i ) (ZNO = phenoxy/naphthoxy‐imine with pendant N‐ and O‐donor groups) were prepared and characterized by elemental analysis, IR spectroscopy, ESI‐HRMS, and by X‐ray crystallography for 2e . In the solid state, 2e features a monomeric structure with κ³ coordination of the monoanionic naphthoxy‐imine‐quinoline ligand onto the nickel center. Upon activation with MAO, both classes of nickel catalysts were able to produce selectively 1‐butene (81.5–92.1 wt%) with turnover frequencies (TOFs) varying from 3,100 to 24,300 mol(C₂H₄) mol (Ni)^?1 h^?1. Nickel precatalysts bearing phenoxy‐imine ligands were much more active than its naphthoxy analogous under the same conditions. The use of a mixture of cocatalysts (MAO/TMA or MAO/TiBA) resulted in poor activities; however the presence of TiBA in the milieu led to a significant improvement on selectivity for 1‐hexene (25.5 wt%). Under optimized conditions ([Ni] = 10 μmol, 30 °C, oligomerization time = 5 min, 20 bar ethylene, [Al]/[Ni] = 600), precatalyst 2c led to TOF = 59,900 mol(C₂H₄) mol(Ni)^?1 h^?1 and selectivity for 1‐butene of 89.5 wt%.     

Routes to Hydrogen Bonding Chain‐End Functionalized Polymers

The contribution of supramolecular chemistry to polymer science opens new perspectives for the design of polymer materials exhibiting valuable properties and easier processability due to the dynamic nature of non‐covalent interactions. Hydrogen bonding polymers can be used as supramolecular units for yielding larger assemblies that possess attractive features, arising from the combination of polymer properties and the responsiveness of hydrogen bonds. The post‐polymerization modification of reactive end‐groups is the most common procedure for generating such polymers. Examples of polymerizations mediated by hydrogen bonding‐functionalized precursors have also recently been reported. This contribution reviews the current synthetic routes toward hydrogen bonding sticker chain‐end functionalized polymers.     

Ethylene and Ethylene/Propylene Polymerization Behavior of Bis(phenoxy‐imine) Zr and Hf Complexes with Perfluorophenyl Substituents

The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.

Structures of complexes 1 – 4 .     

端基功能化聚烯烃的合成与应用

端基功能化聚烯烃（Cef-PO）在聚烯烃改性和构筑复杂结构聚合物方面有着重要应用。可通过控制烯烃配位聚合过程中的自发链转移反应,得到端基不饱和聚烯烃;或通过引入硼烷、磷烷、苯乙烯及其衍生物/氢气等链转移剂得到不同反应性基团封端的聚烯烃;再经进一步基团转化反应,得到多种不同性能的Cef-PO。另外,活性配位聚合过程中,通过对活性增长聚烯烃链选择性封端处理,或使用功能化的催化剂,也可以用来制备Cef-PO。通过配位链转移聚合,即聚烯烃链在催化剂金属中心和烷基金属链转移剂之间快速可逆链转移的聚合过程,可以直接得到具有高度反应活性的碳-金属键封端的聚烯烃,经化学转化得到Cef-PO。此外,叶立德活性聚合、共轭二烯烃的阴离子活性聚合和环烯烃的开环易位聚合也可以用来制备Cef-PO。向其他聚合方式（活性自由基聚合、活性阴离子聚合等）的转换及与点击化学的结合是Cef-PO应用的明显特点。Cef-PO的应用包括作为聚合物的改性剂以及用于合成具有复杂结构的聚合物。     

Synthesis,structural characterization,and olefin polymerization behavior of vanadium(III) complexes bearing bidentate phenoxy‐phosphine ligands

Vanadium(III) complexes bearing phenoxy‐phosphine ligands ( 2a–g ) (2‐R₁‐4‐R₂‐6‐PPh₂‐C₆H₂O)VCl₂(THF)₂ ( 2a : R₁ = R₂ = H; 2b : R₁ = F, R₂ = H; 2c : R₁ = Ph, R₂ = H; 2d : R₁ = tBu, R₂ = H; 2e : R₁ = R₂ = Me; 2f : R₁ = R₂ = tBu; 2g : R₁ = R₂ = CMe₂Ph) were prepared from VCl₃(THF)₃ by treating with 1.0 equiv of the ligand in tetrahydrofuran (THF) in the presence of excess triethylamine (TEA). The reaction of VCl₃(THF)₃ with 2.0 equiv of the ligand in THF in the presence of excess TEA afforded vanadium(III) complexes bearing two phenoxy‐phosphine ligands ( 3c–f ). These complexes were characterized by FTIR and mass spectrum as well as elemental analyses. Structures of 2f and 3c were further confirmed by X‐ray crystallographic analyses. Complexes 2a–g and 3c–f were employed as the catalysts for ethylene polymerization under various reaction conditions. On activation with Et₂AlCl, these complexes exhibited high catalytic activities (up to 41.3 kg PE/mmol_V·h·bar) even at high temperature (70°C), and produced high molecular weight polymer with unimodal molecular weight distributions, indicating the polymerization took place in a single‐site nature. Complexes 3c–f displayed better thermal stability than the corresponding complexes 2a–g under similar conditions. In addition, copolymerizations of ethylene and 1‐hexene with precatalysts 2a–g were also explored in the presence of Et₂AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A Bis(phenoxy‐imine)Zr Complex for Ultrahigh‐Molecular‐Weight Amorphous Ethylene/Propylene Copolymer

A new bis(phenoxy‐imine)Zr complex has been developed. This complex in conjunction with ⁱBu₃Al/Ph₃CB(C₆F₅)₄ at 70°C produces ultrahigh‐molecular‐weight amorphous ethylene/propylene copolymer with a weight‐average molecular weight of 10 200 000 g/mol versus polystyrene standards, which represents the highest molecular weight known for linear, synthetic copolymers to date.     

Ethylene polymerization and copolymerization with 10‐undecen‐1‐ol using the catalyst system DADNi(NCS)2/MAO

The catalyst DADNi(NCS)₂ (DAD = (ArN?C(Me)? C(Me)?ArN); Ar = 2,6‐C₆H₃), activated by methylaluminoxane, was tested in ethylene polymerization at temperatures above 25 °C and variable Al/Ni ratio. The system was shown to be active even at 80 °C and when supported on silica. However, catalyst activity decreased. The catalyst system was also tested in ethylene and 10‐undecen‐1‐ol copolymerization at different ethylene pressures. The best activities were obtained at low polar monomer concentration (0.017 mol/L), using triisopropylaluminum (Al‐i‐Pr₃) to protect the polar monomer. The incorporation of the comonomer increased with the increase of polar monomer concentration. According to ¹³C NMR analyses, all the resulting polyethylenes were highly branched and the polar monomer incorporation decreased as ethylene pressure increased. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5199–5208, 2007     

Synthesis of phenanthroline‐terminated polymers and their Fe(II)‐complexes

Well‐defined mono‐ and bifunctional, phenanthroline‐terminated poly(ethylene glycol) and polyisobutylene capable of polymer network formation were synthesized. The starting materials mono‐ and bi‐phenanthroline‐ (phen) terminated poly(ethylene glycols) (mPEG‐phen, phen‐PEG‐phen) and polyisobutylenes (PIB‐phen, phen‐PIB‐phen) were prepared by the Williamson synthesis and characterized by means of ¹H NMR and MALDI‐TOF mass spectrometry. According to UV–Vis spectrophotometry and ESI‐TOF mass spectrometry, the phenanthroline‐terminated polymers underwent quantitative complex formation with ferrous ions in solution. The aqueous solution of mPEG‐phen shows self‐assembly behavior. Important parameters, such as critical micelle concentration and hydrodynamic radius of the aggregates were also determined. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2709–2715, 2010     

Zirconium complexes bearing bis(phenoxy‐imine) ligands with bulky o‐bis(aryl)methyl‐substituted aniline groups: synthesis,characterization and ethylene polymerization behavior

A series of bis(phenoxy‐imine) zirconium complexes bearing bulky o‐bis(aryl)methyl‐substituted aryl groups on the aniline moiety have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as a single chiral C₂‐symmetric isomer in the solution. X‐ray crystallographic analysis of the resulting biszwitterionic‐type adduct complex C1 · 2HCl reveals that the phenoxy‐imine groups function as a monodentate phenoxy ligand and the oxygen atoms are oriented trans to each other at the central metal atom. Using modified methylaluminoxane (MMAO) as co‐catalyst, C1 · 2HCl, C2–C6 exclusively produce linear aluminium‐terminated polyethylenes (Al‐PEs) with high activity (up to 16.89 × 10⁶ g PE (mol Zr h)^?1, suggesting that chain transfer to aluminum is the predominant termination mechanism. It is noteworthy that the introduction of an excessively bulky o‐bis(aryl)methyl substituent adjacent to the imine‐N produces low molecular‐weight Al‐PEs (M_v 1.6–10.1 × 10³) due to the enhanced rate of chain transfer to alkylaluminium groups during polymerization. Copyright © 2013 John Wiley & Sons, Ltd.     

End‐group functionalization and postpolymerization modification of helical poly(isocyanide)s

This contribution presents the synthesis of helical alkyne‐terminated polymers using a functionalized Nickel complex to initiate the polymerization of menthylphenyl isocyanides. The resulting polymers display low dispersities and controlled molecular weights. Copper‐catalyzed azide/alkyne cycloadditions (CuAAC) are performed to attach various azide‐containing compounds to the polymer termini. After azido‐phosphonate moiety attachment the polymer displays a signal at 25.4 ppm in the ³¹P NMR spectrum demonstrating successful end‐group functionalization. End‐group functionalization of a fluorescent dye allows to determine the functionalization yield as 89% (±8). Successful ligation of an azide‐functionalized peptide sequence (M_KLA = 1547 g/mol) increases the M_n from 5100 for the parent polymer to 6700 for the bioconjugate as visualized by GPC chromatography. Analysis by CD spectroscopy confirms that the helical conformation of the poly(isocyanide) block in the peptide–polymer conjugate is maintained after postpolymerization modification. These results demonstrate an easy, generalizable, and versatile strategy toward mono‐telechelic helical polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2766–2773     

Synthesis of Ultrahigh‐Molecular‐Weight Ethylene‐1‐Hexene Copolymers with High Hexene Content via Living Polymerization with Fluorinated Bis(phenoxy–imine) Titanium(IV)

The fluorinated FI–Ti catalyst bis[N‐(3‐propylsalicylidene)‐pentafluoroanilinato] titanium(IV) dichloride (PFI) combined with dried methylaluminoxane (dMAO) is investigated for ethylene/1‐hexene copolymerization at 50 °C under atmospheric pressure. The reaction shows good livingness and has a high activity at high [H]/[E] molar ratios up to 14. Ultrahigh molecular weight (>1.4 × 10⁶ g mol⁻¹) copolymers with high 1‐hexene content (>25 mol%) are prepared. Kinetic parameters of the copolymerization with PFI are determined. The first‐order Markov statistics applies and the product of the reactivity ratios r₁r₂ is close to 1, giving random unit distributions.

     

Copolymerization of norbornene with ω‐alkenylaluminum as a precursor comonomer for introduction of carbonyl moieties

Norbornene copolymers functionalized with methyl ester group or carboxy group are facilely synthesized by the copolymerization of norbornene and 7‐octenyldiisobutylaluminum (ODIBA) with ansa‐dimethylsilylene(fluorenyl)(t‐butylamido)dimethyltitanium ( 1 ) activated by Ph₃CB(C₆F₅)₄, and the sequential CO₂/methanolysis reactions or CO₂/hydrolysis reactions, respectively. The methanolysis and the hydrolysis are simply switched by engaging acidic methanol or acidic aqueous acetone as the quenching/washing solution, respectively. Meanwhile, the increase of ODIBA in the copolymerization abruptly decreases the yield and number–average molecular weight (M_n) of the product. However, the addition of triisobutylaluminum (8 mM) and the use of excess Ph₃CB(C₆F₅)₄ (twofold of 0.4 mM of 1 ) significantly increase the yield, accompanying the increase in the M_n and the narrowing of the molecular weight distribution (M_w/M_n), especially in the case of the use of excess Ph₃CB(C₆F₅)₄. The yield (g polymer/g monomers), M_n, and M_w/M_n reach up to 0.82, 341,000, and 1.46, respectively, at a copolymerization condition. The carboxy groups in the norbornene copolymers are controlled in the range of 0–1.8 mol % in high polymer yields with high M_n and narrow M_w/M_n accompanied by the decrease in the contact angle with water from 104° to 89°. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5085–5090     

Ultrahigh Branching of Main‐Chain‐Functionalized Polyethylenes by Inverted Insertion Selectivity

Branched polyolefin microstructures resulting from so‐called “chain walking” are a fascinating feature of late transition metal catalysts; however, to date it has not been demonstrated how desirable branched polyolefin microstructures can be generated thereby. We demonstrate how highly branched polyethylenes with methyl branches (220 Me/1000 C) exclusively and very high molecular weights (ca. 10⁶ g mol^?1), reaching the branch density and microstructure of commercial ethylene–propylene elastomers, can be generated from ethylene alone. At the same time, polar groups on the main chain can be generated by in‐chain incorporation of methyl acrylate. Key to this strategy is a novel rigid environment in an α‐diimine Pd^II catalyst with a steric constraint that allows for excessive chain walking and branching, but restricts branch formation to methyl branches, hinders chain transfer to afford a living polymerization, and inverts the regioselectivity of acrylate insertion to a 1,2‐mode.     

Highly active copolymerization of ethylene with 10‐undecen‐1‐ol using phenoxy‐based zirconium/methylaluminoxane catalysts

Activated with methylaluminoxane (MAO), phenoxy‐based zirconium complexes bis[(3‐^tBu‐C₆H₃‐2‐O)‐CH?NC₆H₅]ZrCl₂, bis[(3,5‐di‐^tBu‐C₆H₂‐2‐O)‐PhC?NC₆H₅] ZrCl₂, and bis[(3,5‐di‐^tBu‐C₆H₂‐2‐O)‐PhC?N(2‐F‐C₆H₄)]ZrCl₂ for the first time have been used for the copolymerization of ethylene with 10‐undecen‐1‐ol. In comparison with the conventional metallocene, the phenoxy‐based zirconium complexes exhibit much higher catalytic activities [>10⁷ g of polymer (mol of catalyst)^?1 h^?1]. The incorporation of 10‐undecen‐1‐ol into the copolymers and the properties of the copolymers are strongly affected by the catalyst structure. Among the three catalysts, complex c is the most favorable for preparing higher molecular weight functionalized polyethylene containing a higher content of hydroxyl groups. Studies on the polymerization conditions indicate that the incorporated commoner content in the copolymers mainly depends on the comonomer concentration in the feed. The catalytic activity is slightly affected by the Al_(MAO)/Zr molar ratio but decreases greatly with an increase in the polymerization temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5944–5952, 2005     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

A New Route for the Modification of Halogen End Groups to Amino End‐Functionalized Poly(tert‐butyl acrylate)s

The synthesis of primary amine end‐functional poly(tert‐butyl acrylate)s has been achieved by using the Gabriel reaction. Polymerization of tert‐butyl acrylate was first achieved by atom transfer radical polymerization using ethyl‐2‐bromoisobutyrate or paramethoxyphenyl‐2‐bromoisobutyrate as initiator. Both resulting polymers, with a bromide‐end atom, were converted into phthalimido intermediates which then were successfully hydrolyzed using potassium hydroxide in tert‐butyl alcohol to result in poly(tert‐butyl acrylate)s terminated by a primary amine function. End group interconversions were followed by ¹H NMR, FT‐IR, and MALDI‐TOF MS measurements. All the results proved that quantitative transformations were achieved at each step. Moreover, the method developed is very easy to carry out.

     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002