Ce掺杂对0.9Na0.5Bi2.5Nb2O9-0.1LiNbO3高温无铅压电陶瓷性能的影响

本文采用固相法制备了Ce掺杂的0.9Na0.5Bi2.5Nb2O9-0.1LiNbO3(NBN-LN+ xwt; CeO2)层状高温无铅压电陶瓷;系统地研究了CeO2掺杂对NBN-LN陶瓷的物相、显微结构及电性能的影响;获得的样品均为居里点高于780℃的单一铋层状结构相陶瓷;当CeO2掺杂量x=0.75时,样品具有最佳电性能:d33=28 pC/N,kp=12.11;,tan δ=0.10;,Pr=9.50 μC/cm2;且该组分陶瓷样品在700℃经退极化处理后,其d33仍保持在22 pC/N以上,表明该材料在高温领域下具有良好的应用前景.     

Mn改性Na0.5Bi8.5Ti7O27铋层状陶瓷结构与电性能的研究

采用固相法制备了Na0.5Bi85Ti7O27+xmol; MnCO3(NBTO-Mn-x,x=0.00,3.00,5.00,7.00)铋层状压电陶瓷材料,系统研究了MnCO3的引入对Na0.5Bi8Ti7O27共生结构铋层状陶瓷物相结构、微观结构以及电性能的影响.结果表明:所有样品均为单一的共生结构铋层状陶瓷材料,Mn的引入没有改变其物相结构;适量的Mn掺入能明显降低Na0.5Bi8.5Ti7O27陶瓷的介电损耗tanδ,改善其电性能,当x=5.00时,其综合性能最佳:p、d33、Qm、kp和k1分别为p=6.90 g/cm3、d33=19 pC/N、Qm=3230、kp=11.00;、k11=13.40;,该组分陶瓷样品具有良好的热稳定性.     

Sr和Nb复合掺杂Bi4Ti3O12基高温压电陶瓷的研究

采用传统固相法制备了Bi4Ti3O12 +0-91wt;Nb2O5+xwt; SrCO3(BTNO-Sr,0.00≤x≤1.50)层状压电陶瓷,研究了Sr掺杂对BTNO系陶瓷微观结构与电性能的影响.结果表明所有样品均为单一的铋层状结构相陶瓷.适量引入Sr能使BTNO系陶瓷的晶粒尺寸细化与均一,表现出介电弥散性,并改善其压电、机电和铁电性能.当x=0.50时,样品性能最佳:相对密度p=98.8;,压电常数d33=22 pC/N,平面机电耦合系数kp=9.5;,机械品质因子Qm =4462,剩余极化强度Pr=13.01μC/cm2,居里温度Tc=620℃.此外,介电性能和热稳定性能研究显示材料x=0.50具有好的压电稳定性,适合于制备高温高频压电器件.     

Nb2O5掺杂对Pb(Mg1/3Nb2/3)O3-PbZrO3-PbTiO3陶瓷组织与性能的影响

采用固相烧结法制备Nb2O5掺杂的Pb(Mg1/3Nb2/3) O3-PbZrO3-PbTiO3+ 0.5mol; ZnO(PMN-PZT)压电陶瓷,研究了不同Nb2O5掺杂量对材料结构及压电介电性能的影响.实验结果表明,随着Nb2O5掺杂量的增加(0～1 mol;),PMN-PZT陶瓷的晶界强度提高,断裂模式由沿晶断裂逐渐转变为穿晶断裂,而且陶瓷的压电介电性能升高.当Nb2O5掺杂量为1mol;时,1250℃烧结的陶瓷样品性能参数为:d33=430 pC/N,Qm=60,kp=0.52,kt=0.38,εr=3620,tanδ=0.017.     

复合烧结助剂对CSLST微波介质陶瓷的性能影响

研究了复合添加12.5wt; Li2CO3-B2O3-CuO (LBC)玻璃和不同含量(0～4.0wt;) Bi2O3对(Ca0.9375Sr0.0625)0.3 (Li0.5Sm0.5)0.7TiO3 (CSLST)微波介质陶瓷烧结特性、相组成和介电性能的影响,分析了CSLST陶瓷与银的共烧行为.结果表明:复合添加LBC玻璃和Bi2O3能有效降低CSLST陶瓷烧结温度至875℃,XRD分析结果显示添加0～ 1.0wt; Bi2O3有Cu3Ti3O和CaCu3Ti4O12新相产生,当Bi2O3的添加量大于2.0wt;,杂相消失.随着Bi2O3添加量的增加,陶瓷的频率温度系数Tf向负方向偏移.复合添加12.5wt;LBC玻璃和2.0wt; Bi2O3的CSLST陶瓷,在875℃保温5h烧结后,具有优良的微波介电性能:εr=78.9,Q×f=1852 GHz,τε=3×10-6/C.该材料与银共烧界面结合状况良好,无明显扩散,适合作为LTCC的材料.     

La3+掺杂Ca1-xLaxCu3Ti4O12陶瓷的制备及性能研究

采用固相反应法制备了La3+掺杂的CaCu3Ti4O12(CCTO)陶瓷,研究了La3+掺杂量对Ca1-xLaxCu3Ti4O12(x=0;,1;,3;,5;,7;)陶瓷物相结构、微观形貌和介电性能影响,对La3+掺杂影响CCTO陶瓷介电性能的机理进行了分析.结果表明:x为3;时,开始出现杂相;x高于5;时,陶瓷晶粒开始细化;La3+掺杂可以显著提高CaCu3Ti4O12陶瓷的介电常数,同时介电损耗在高频段也相应降低,从而有助于CCTO陶瓷的综合介电性能的提升.     

Sm掺杂Bi4Ti3O12陶瓷晶体结构及电性能的研究

采用固相反应工艺制备了Sm3+掺杂层状结构无铅Bi4-xSmxTi3O12(x=0.00,0.25,0.50,0.75,1.00,1.25)介电陶瓷.利用XRD、SEM等测试方法研究了Sm掺杂量、烧结温度和保温时间对Bi4-xSmxTi3O12 (BST) 陶瓷晶体结构及电性能的影响.结果表明:所制备的Bi4-xSmxTi3O12陶瓷均具有单一正交相结构,BST陶瓷表面晶粒的显微形貌表现为随机排列的棒状结构.样品的铁电性能测试表明,Sm3+施主掺杂明显降低了BIT的电导率,随着Sm3+含量的增加,Sm3+逐渐有部分取代B位,由于Sm3+取代Ti4+大大降低了氧空位的浓度,使得氧空位对电畴的钉扎作用减弱,并且材料的剩余极化Pr也相应提高.     

Y2O3掺杂对(Ba0.85Ca0.15)Zr0.1Ti0.896Sm0.004O3无铅压电陶瓷介电弛豫与电性能的影响

采用固相法制备了(Ba0.85Ca0.15)1-xYxZr0.1Ti0.896Sm0.004O3(BCZTS-Yx)无铅压电陶瓷.研究了Y2O3含量对BCZTS-Yx无铅压电陶瓷相结构、压电与介电性能的影响.结果表明:Y3+作为施主掺杂物占据A位.当0.004≤x≤0.006时,陶瓷存在三方相与四方相共存的准同型相界结构.当x=0.006时,陶瓷具有最佳的电性能,分别为d33=384 pC/N,kp=37.2;,εr～6775,tanδ ～ 2.04;.利用Curie-Weiss定律对该实验结果进行拟合,发现x为0.006的样品的介电弛豫特征更为明显.     

Bi3Ti4O12/α-Bi2O3/TiO2复合光催化剂的制备及其可见光催化活性研究

以工业二氧化钛(TiO2)、五水合硝酸铋(Bi(NO3)3·5H2O)为原料制备了Bi3Ti4O12/α-Bi2O3/TiO2复合光催化剂.采用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT-IR)、紫外-可见吸收光谱(UV-Vis)、荧光光谱(PL)等表征方法对光催化剂结构进行分析,表明复合样品中形成了Bi3 Ti4 O12/α-Bi2 O3/TiO2异质结结构,其禁带宽度减小、吸收带边红移,光催化效率有明显提高.以亚甲基蓝为目标污染物评价其光催化活性,TiO2与Bi(NO3)3·5H2O质量比为1:2.5,煅烧温度为600℃,煅烧时间为5 h时,复合样品光催化活性最佳,在12 W LED灯下,180 min后对浓度为10 mg/L的亚甲基蓝溶液的去除率达96.8;.     

BBZS掺杂对BaO-Sm2O3-TiO2系微波介质陶瓷性能的影响

利用固相法制备BaO-Sm2O3-TiO2系微波介质陶瓷.通过复合添加氧化物ZnO、CuO和玻璃料Bi2O3-B2O3-ZnO-SiO2(BBZS),系统的烧结温度降至900℃.研究了玻璃料的添加量对介电性能的影响.按BaSm2Ti4O12+1wt;ZnO+1wt;CuO+xwt;BBZS(0相似文献   

Elastic properties of the dithionates Na2S2O6 · 2 H2O,K2S2O6, Rb2S2O6, CaS2O6 · 4H2O and SrS2O6 · 4 H2O

Single crystals of the title compounds having optical quality and dimensions of several cm were grown from aqueous solutions. The elastic and thermoelastic constants were determined from ultrasonic resonance frequencies of thick plates. The true point symmetry of K₂S₂O₆ and Rb₂S₂O₆, which is screened by a hexagonal hypermorphy, could be clearly revealed to be trigonal (32) by the existence of the elastic constant c₁₄. In the case of CaS₂O₆ · 4H₂O and SrS₂O₆ · 4H₂O the constant c₁₄ of the specimens appeared too small to confirm the trigonal symmetry group required from electrooptic and non-linear optic effects unambiguously. The isotypy of K₂S₂O₂ and Rb₂S₂O₆ as well as that of CaS₂O₆ · 4H₂O and SrS₂O₆ · 4H₂O is confirmed by their elastic behaviour. The mean elastic stiffness of dithionates is closely related to that of the corresponding sulphates. In the vicinity of the second-order phase transition of K₂S₂O₆ near 235 K weak anomalies of the temperature derivatives of the longitudinal elastic stiffnesses are observed.     

CaO-MgO-Al2O3-Fe2O3-B2O3-SiO2系微晶釉的制备

通过引入B2O3以降低烧成温度,利用赤泥中的Fe2O3为着色剂,在1150℃左右低温烧成制备了CaO-MgO-Al2O3-Fe2O3-B2O3-SiO2系微晶釉.赤泥的加入量为20;左右时,釉面具有良好的装饰效果和显微硬度.利用XRD、SEM研究了釉的物相及显微组织.结果表明,釉中析出的微晶是普通辉石,微晶的含量随MgO及CaO的含量增加而增加,而提高Al2O3含量则抑制微晶的析出.     

R2O-RO-SiO2-Al2O3-Fe2O3-P2O5系分相釉的研究

针对铁红分相釉的配方特点,采用L8(4 ×24)正交实验研究了钠长石、牛骨灰、滑石、方解石、石英加入量对R2O-RO-SiO2-Al2O3-Fe2O3-P2O5系统分相釉釉面效果的影响,采用扫描电子显微镜(SEM)和能谱分析(EDS)对釉层的微观结构进行了表征.研究发现:牛骨灰对釉面是否出现“柿红”效果影响最显著,而方解石影响最不明显.Si/P摩尔比对铁红色釉面的产生起关键作用,当Si/P摩尔比小于2O,出现铁红釉面效果的概率极高.随着滑石加入量从9份变化到18份,出现铁红色釉面的趋势反而降低.经SEM和EDS分析发现,“柿红色”、“酒红色”釉面效果的产生很大程度上是由于釉层液液分相促进Fe2O3富集或偏析造成,且特别容易在高钠、低镁、低铝处聚集,最终连成雪花状结晶.     

Evolution of nanocrystalline BaBi2Nb2O9 in Li2B4O7–BaO–Bi2O3–Nb2O5 glass system

Transparent glasses and glass nano crystal composites (GNCs) of various compositions in the system (100 − x)Li₂B₄O₇–x(BaO–Bi₂O₃–Nb₂O₅) (where x = 10, 20, and 30 in molar ratio) were fabricated via splat-quenching technique. The glassy nature of the as-quenched samples was established by differential thermal analyses. X-ray powder diffraction and transmission electron microscopic (TEM) studies confirmed the formation of layered perovskite BBN via a fluorite like phase. TEM studies revealed the presence of 10 nm sized spherical crystallites of fluorite like BaBi₂Nb₂O₉ phase in the glassy matrix of Li₂B₄O₇ (LBO). The influence of composition on the dielectric and the optical properties (transmission, optical band gap) of these samples has been investigated.     

Pr2O3对含Cr2O3辉石系矿渣微晶玻璃晶化行为的影响

以白云鄂博西尾矿和粉煤灰为主要原料,分别制备了添加0,2.0wt;,4.0wt;和6.0wt; Pr2O3的辉石系矿渣微晶玻璃;综合采用基于DSC/DTA结果的析晶活化能Ek、Avrami指数以及粘流活化能Eη和背散射电子SEM显微形貌分析研究了Pr2O3对析晶的影响.结果表明在所研究范围内,Pr2O3含量的提高在整体上抑制了辉石相的析出.其原因除了与富Pr颗粒相对辉石相在析晶过程中的“钉扎”有关外,还与Pr2O3含量提高后使基础玻璃网络聚合程度加大,从而增大了辉石相形成所需离子扩散的阻力有关.     

Optical properties of the germanate melilites Sr2MgGe2O7, Sr2ZnGe2O7 and Ba2ZnGe2O7

Refractive indices and their dispersion in the wavelength range from 365 nm to 2325 nm and transmission ranges of the tetragonal melilite‐type germanates Sr₂MgGe₂O₇, Sr₂ZnGe₂O₇ and Ba₂ZnGe₂O₇ were determined. The uniaxial positive crystals Sr₂MgGe₂O₇ and Ba₂ZnGe₂O₇ both offer the possibility for phase matched second harmonic generation, a detailed analysis of phase matching conditions is given. The refractive indices of Sr₂ZnGe₂O₇ show an isoindex (isotropic) point at 467 nm. The investigation was performed on Czochralski grown large single crystals. The crystal structure of all three germanates were determined by means of X ‐ray diffraction. The results corroborate unmodulated melilite‐type structures at room temperature. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Oxygen-conducting compounds with La2Mo2O9 structure in the ternary system La2Mo2O9-Sm2W2O9-Sm2Mo2O 9 + : Synthesis and properties

Polycrystalline samples in the ternary system La₂Mo₂O₉-Sm₂W₂O₉-Sm₂Mo₂O ₉ ⁺ were synthesized in air. The region of the existence of compounds with the lanthanum molybdate (La₂Mo₂O₉) structure in this system was determined. The polymorphism of the synthesized compounds was studied. Doping with samarium or with samarium and tungsten was shown to lead to the suppression of the transition between the monoclinic and cubic phases α → β and the appearance of the transition β _ms → β between two cubic phases. In samples with a high samarium content, the phase transition β _ms → β manifests itself as significant anomalies in the temperature dependences of the dielectric permeability and electric conductivity. An increase in the concentration of samarium in the samples leads to a substantial decrease in the conductivity compared with the nondoped compound La₂Mo₂O₉.     

Yb2O3-Y2O3-Gd2O3-ZrO2热障涂层制备及性能研究

以Yb2O3、Y2O3 、Gd2O3稀土氧化物粉末和ZrOCl2·8H2O粉末为原料,采用化学共沉淀法制备了Yb2O3-Y2O3-Gd2O3-ZrO2 (YYGZO)热喷涂用粉末,采用大气等离子喷涂技术制备了YYGZO涂层,利用场发射扫描电镜(FESEM)、X射线衍射(XRD)研究了YYGZO粉末及涂层的微观组织形貌、相结构.结果表明,制备的热喷涂YYGZO粉末大部分呈规则实心球体状,且球形度良好,颗粒粒径均匀,大部分颗粒粒径分布为30～60μm,流动性能较好,满足大气等离子喷涂的要求.YYGZO涂层具有较好的高温相结构稳定性.所制备YYGZO热障涂层组织结构比较致密,涂层各个界面结合紧密,孔隙率约为9.23;,结合强度为35.2 MPa.     

Fe2O3-CO3O4共掺杂MgO-Al2O3-SiO2体系的红外辐射性能研究

采用固相反应法制备Fe2O3-Co3O4共掺杂MgO-Al2O3-SiO2体系的复合陶瓷材料,并通过XRD、SEM、XPS以及红外辐射测试等方法研究了样品的结晶行为与红外辐射性能.结果表明:Fe2 O3和Co3 O4共掺杂MgO-Al2 O3-SiO2体系后离子分布改变并生成混合尖晶石,从而引起品格畸变,从而有效提高材料的红外辐射性能.材料的红外发射率与其晶格畸变程度具有相同的变化趋势,并随Fe2 O3与Co3O4质量之比(R)的增加呈非线性变化.当R=3∶2时,材料在8 ～ 14 μm波段的辐射率可达0.92.     

Vacuum-ultraviolet absorption of interstitial O2 and H2O molecules in SiO2 glass

Vacuum-ultraviolet (VUV) absorption of O₂ and H₂O molecules incorporated in interstitial voids in SiO₂ glass by thermal annealings was examined. Interactions of the interstitial molecules with the surrounding SiO₂ glass network lead to a redshift of the VUV absorption band of interstitial O₂, while a blueshift of that of interstitial H₂O, both accompanied by an increase in the intensity of the absorption bands. The Coulomb repulsion, London dispersion, and hydrogen bonding are the main interactions responsible for the modification of the VUV absorption bands.