Micelles‐Encapsulated Microcapsules for Sequential Loading of Hydrophobic and Water‐Soluble Drugs

Layer‐by‐layer (LbL) assembly was conducted on CaCO₃ microparticles pre‐doped with polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles, and resulted in micelles encapsulation in the microcapsules after core removal. Distribution of the micelles in the templates and capsules was characterized by transmission electron microscopy and confocal laser scanning microscopy. The micelles inside the capsules connected with each other to form a chain and network‐like structure with a higher density near the capsule walls. The hydrophobic PS cores were then able to load small uncharged hydrophobic drugs while the negatively charged PAA corona could induce spontaneous deposition of water‐soluble positively charged drugs such as doxorubicin.

     

Defined Picogram Dose Inclusion and Release of Macromolecules using Polyelectrolyte Microcapsules

Summary: Reversible pH‐induced swelling of (PAH/PSS) polyelectrolyte microcapsules is accompanied by increased porosity, making them permeable to poly(acrylic acid) (PAA) at pH values higher than 11.2. This pH‐switchable permeability was used to encapsulate the polyanion in alkaline conditions. Relationship between starting PAA concentration in solution and amount finally being encapsulated has been established and can be used further as calibration curve. A desired amount of encapsulated polymer in the picogram range per capsule can be achieved. The loaded capsules were then used as microreactors by forming a complex between the PAA and Ca²⁺ ions.

General scheme for pH‐induced encapsulation of (PAA) in alkali condition by switching their permeability.     

A Novel Class of Betaine‐Type Polyampholytes with Stimuli‐Responsive and Complexing Properties

Linear and crosslinked betaine‐type polyampholytes based on ethyl 3‐aminocrotonate and unsaturated carboxylic acids have been synthesized by very fast polymerization in bulk and solution. Bulk polymerization occurred exothermically even at room temperature and without adding an initiator. The polyampholytes showed stimuli‐responsive properties with respect to pH, ionic strength, water/organic solvent mixtures, and metal ion complexation.

Temperature profile of the polymerization reaction for an equimolar mixture of CRO and AA with time in the absence of initiator.     

Surface‐Functionalized,Ring‐Opening Metathesis Polymerization‐Derived Monoliths for Anion‐Exchange Chromatography

Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.

     

Encapsulation of Photosensitizer into Multilayer Microcapsules by Combination of Spontaneous Deposition and Heat‐Induced Shrinkage for Photodynamic Therapy

Annealing of PDADMAC/PSS multilayer microcapsules assembled on PSS‐doped CaCO₃ particles at 80 °C for 30 min reduces their size dramatically from 6.9 ± 0.3 to 3.1 ± 0.5 µm. Methylene blue molecules are encapsulated by spontaneous deposition and post‐annealing with a concentration of 22 mg · mL^?1, which is 1000 times higher than the feeding value. The unreleased MB molecules are retained stably for a long time, which are then protected by the capsules against reductive enzymes and keep their photodynamic activity. The viability of HeLa cells incubated with the MB‐loaded capsules decreases sharply from ≈75 (dark cytotoxicity) to ≈20% after irradiation with a laser at 671 nm and 60 J · cm^?2 for 75 s.

     

Azide/Alkyne‐“Click”‐Reactions of Encapsulated Reagents: Toward Self‐Healing Materials

The successful encapsulation of reactive components for the azide/alkyne‐“click”‐reaction is reported featuring for the first time the use of a liquid polymer as reactive component. A liquid, azido‐telechelic three‐arm star poly(isobutylene) ( = 3900 g · mol⁻¹) as well as trivalent alkynes were encapsulated into micron‐sized capsules and embedded into a polymer‐matrix (high‐molecular weight poly(isobutylene), = 250 000 g · mol⁻¹). Using (Cu^IBr(PPh₃)₃) as catalyst for the azide/alkyne‐“click”‐reaction, crosslinking of the two components at 40 °C is observed within 380 min and as fast as 10 min at 80 °C. Significant recovery of the tensile storage modulus was observed in a material containing 10 wt.‐% and accordingly 5 wt.‐% capsules including the reactive components within 5 d at room temperature, thus proving a new concept for materials with self‐healing properties.

     

Synthesis of Oligosaccharide‐Branched Ribofuranan by Ring‐Opening Polymerization of a New Anhydroribo Trisaccharide Monomer

A new anhydroribotrisaccharide monomer, A2B3LR ( 1 ), was synthesized and ROP was carried out to elucidate the polymerizability and to obtain oligosaccharide‐branched polysaccharides with defined structures. The new trisaccharide monomer was found to be polymerized readily with BF₃ · OEt₂ as a catalyst at ?40 °C to give a lactose‐branched polymer. Copolymerization with ADBR gave the corresponding copolymers in good yields. After removal of protective benzyl groups, D ‐lactose‐branched ribofuranans with free hydroxyl groups were obtained in good yields. The structure of polymers was analyzed by ¹H, ¹³C, and two‐dimensional NMR measurements, suggesting that D ‐lactose‐branched ribofuranans had (1 → 5)‐α stereoregularity.

     

Silica‐Protected Micron and Sub‐Micron Capsules and Particles for Self‐Healing at the Microscale

A generalized silica coating scheme is used to functionalize and protect sub‐micron and micron size dicyclopentadiene monomer‐filled capsules and polymer‐protected Grubbs' catalyst particles. These capsules and particles are used for self‐healing of microscale damage in an epoxy‐based polymer. The silica layer both protects the capsules and particles, and limits their aggregation when added to an epoxy matrix, enabling the capsules and particles to be dispersed at high concentrations with little loss of reactivity.

     

Layer‐by‐Layer Spin Self‐Assembled Hole Injection Layers Containing a Perfluorinated Ionomer for Efficient Polymer Light‐Emitting Diodes

Deposition of hole injection layers including a perfluorinated ionomer has been demonstrated using layer‐by‐layer spin self‐assembly for enhanced device efficiency and lifetime in PLEDs. We show that the LBL spin self‐assembled thin films enable to control work functions of indium‐tin oxide anodes by changing the PFI concentration and that a resulting green‐emitting device has an enhanced luminescence efficiency and 18 times longer half lifetime than a device using a conventional HIL. We also fabricate a gradient of energy levels by the LBL self‐assembly of the PFI that results in a work function of 5.74 eV, which can be used to improve carrier injection even for an emitting layer whose ionization potential is over 5.7 eV.

     

Acid‐Degradable Core‐Crosslinked Micelles Prepared from Thermosensitive Glycopolymers Synthesized via RAFT Polymerization

A thermoresponsive block copolymer, namely poly(acryloyl glucosamine)‐block‐poly(N‐isopropylacryamide) (PAGA₁₈₀‐b‐PNIPAAM₃₅₀) was simultaneously self‐assembled and crosslinked in aqueous medium via RAFT polymerization at 60 °C to afford core‐crosslinked micelles exhibiting a glycopolymer corona and a PNIPAAM stimuli‐responsive core. An acid‐labile crosslinking agent, 3,9‐divinyl‐2,4,8,10‐tetraoxaspiro[5.5]undecane, was employed to generate thermosensitive and acid‐degradable core‐shell nanoparticles. Stable against degradation at pH = 6 and 8.2, the resulting core crosslinked micelles readily hydrolyzed into well‐defined free block copolymers at lower pH (30 min and 12 h respectively at pH = 2 and 4).

     

Tunable Metal‐Enhanced Fluorescence by Stimuli‐Responsive Polyelectrolyte Interlayer Films

In this paper, we report on the tunable metal‐enhanced fluorescence (MEF) of Ag nanostructures. Because of the good MEF properties of the highly dendritic Ag nanostructures, we obtained an increase of up to 25 times for the weak fluorescence of porphyrin molecules (Por^4–). More importantly, by the introduction of a stimulus‐responsive PAA/PDDA multilayer film as an interlayer, the distance between the fluorophores and the Ag nanostructures could be tuned by immersing the substrates into solutions of different ionic strength or pH. The MEF behavior of the composite films could thus be tuned in a controlled manner, because of the distance dependent nature of the MEF effects.

     

pH‐Responsive PEG‐Poly(β‐amino ester) Block Copolymer Micelles with a Sharp Transition

Summary: A pH‐sensitive block copolymer is synthesized by step polymerization and its pH‐sensitive micellization‐demicellization behavior is studied. This polymer has a hydrophilic MPEG (shell) and hydrophobic but pH‐sensitive poly(β‐amino ester) (core), which can form a self‐assembled micelle. As confirmed by fluorescence spectroscopy and dynamic light scattering (DLS), this polymer shows a sharp pH‐sensitive micellization‐demicellization behavior. It is confirmed that the pH sensitivity is affected by the molecular weight ratio between the MPEG and poly(β‐amino ester).

Plots of the intensity ratio I₃₃₇/I₃₃₄ (from pyrene excitation spectra): a) vs. pH for copolymer samples and b) vs. log (concentration) for M1.     

A Novel Type of Vesicles Based on Ionic and π–π Interactions

Electrostatic self‐assembly can be used to form supramolecular vesicles in aqueous solution. Vesicles consist of cationic G8 poly(amidoamine) dendrimers and the trivalent sulfonate dye Ar27. No classical amphiphiles are present but the interplay of electrostatics, π–π interaction and geometric factors influences the structure formation. Labeled guest molecules, both small molecules and peptides, can be included inside these vesicles and vesicles imaged by fluorescence techniques. The structure was studied by dynamic and static light scattering, small‐angle neutron scattering, confocal laser scanning microscopy, and fluorescence correlation spectroscopy. The study indicates the prospect of constructing functional nanoobjects by the self‐assembly of charged molecules in aqueous solution.

     

Polyaniline Microtubes with a Hexagonal Cross‐Section and pH‐Sensitive Fluorescence Properties

Polyaniline (PANI) microtubes with a hexagonal cross‐section are successfully synthesized by a self‐assembly process in the presence of 8‐hydroxyquinoline‐5‐sulfonic acid (HQS) as a dopant and FeCl₃ as an oxidant. The wall thickness of the PANI/HQS microtubes can be adjusted by the content of the oxidant. It is proposed that the aniline/HQS salts serve as a hard template for the formation of the hexagonal‐cross‐section microtubes. Moreover, PANI/HQS microtubes combined with ZnSO₄ show pH‐dependent fluorescence. PANI hexagonal‐cross‐section microtubes combined with a pH‐sensitive fluorescence may promise potential applications in fields such as chemical sensors and confined reaction vessels.

     

pH‐Disintegrable Polyelectrolyte Multilayer‐Coated Mesoporous Silica Nanoparticles Exhibiting Triggered Co‐Release of Cisplatin and Model Drug Molecules

We report on the fabrication of pH‐disintegrable polyelectrolyte multilayer‐coated mesoporous silica nanoparticles (MSN) capable of triggered co‐release of cisplatin and model drug molecules. The outer polyelectrolyte multilayer was assembled from permanently cationic polyelectrolyte, poly(allyl amine hydrochloride) (PAH), and negatively charged polyelectrolyte, P(DMA‐co‐TPAMA), consisting of N,N‐dimethylacrylamide (DMA) and 3,4,5,6‐tetrahydrophthalic anhydride‐functionalized N‐(3‐aminopropyl)methacrylamide (TPAMA) monomer units, which exhibits pH‐induced charge conversion characteristics. Thus, the subtle alteration of solution pH from 7.4 to ≈5–6 can lead to the disintegration of outer polyelectrolyte multilayers, accompanied with the co‐release of cisplatin and RhB.

     

Enzyme‐Catalyzed Ring‐Opening Polymerization of Unsubstituted β‐Lactam

The synthesis of poly(β‐alanine) by Candida antarctica lipase B immobilized as novozyme 435 catalyzed ring‐opening of 2‐azetidinone is reported. After removal of cyclic side products and low molecular weight species pure linear poly(β‐alanine) is obtained. The formation of the polymer is confirmed with ¹H NMR spectroscopy and MALDI‐TOF mass spectrometry. The average degree of polymerization of the obtained polymer is limited to = 8 by its solubility in the reaction medium. Control experiments with β‐alanine as a substrate confirmed that the ring structure of the 2‐azetidinone is necessary to obtain the polymer.

     

Heparin-like macromolecules for the modification of anticoagulant biomaterials

A heparin‐like structured macromolecule (HLSM) is synthesized by RAFT polymerization using carboxyl‐terminated trithiocarbonate as the RAFT agent. The HLSM can be directly blended with PES in DMAC to prepare flat‐sheet membrane by means of a liquid–liquid phase separation technique. The synthesized polymeric material retard blood clotting and the modified membrane exhibits good anticoagulant ability due to the existence of the important functional groups ? SO₃H, ? COOH and ? OH. The anionic groups on the membrane surface may bind coagulation factors and thus improve anticoagulant ability. The results indicate that the HLSM has potential to improve the anticoagulant properties of biomaterials and to be applied in blood purification including hemodialysis and bioartificial liver supports.

     

Gold Nanoparticles Functionalized by a Dextran‐Based pH‐ and Temperature‐Sensitive Polymer

A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.