MCM-41和HZSM-5协同催化对油菜秸秆热解的影响

以油菜秸秆为原料,采用两种方案分层布置催化剂(HZSM-5/MCM-41和MCM-41/HZSM-5),并与MCM-41和HZSM-5单独催化进行对比,从生物油品质和催化剂耐久性两个角度探究协同催化作用机理;对精制生物油有机相进行理化特性分析,采用FT-IR和GC-MS进行成分分析,对催化剂进行耐久性分析。结果表明,与单独催化相比,协同催化所得精制生物油液相产率略有降低,气相产率升高,精制生物油有机相理化特性进一步提高,其中,MCM-41/HZSM-5协同催化所得精制生物油有机相热值较高,为34.31 MJ/kg;精制生物油有机相中含有多种芳香族类物质和少量的羰基类物质,协同催化较单独催化能产生较多的烃类物质及较少的含氧芳香族类物质,其中,MCM-41/HZSM-5协同催化所得精制生物油有机相中烃类物质含量较高,且以单环芳香烃为主;HZSM-5分子筛在300-800℃有两个失重峰,MCM-41分子筛在300-800℃仅有一个失重峰,表明MCM-41催化剂上沉积的焦炭成分单一,较易去除,且协同催化后分子筛表面沉积的焦炭总含量较少。     

Catalytic Transformation of Bio-oil to Olefins with Molecular Sieve Catalysts

Catalytic conversion of bio-oil into light olefins was performed by a series of molecular sieve catalysts, including HZSM_-5, MCM_-41, SAPO_-34 and Y_-zeolite. Based on the light olefins yield and its carbon selectivity, the production of light olefins decreased in the following order:HZSM_-5>SAPO_-34>MCM_-41>Y_-zeolite. The highest olefins yield from bio-oil using HZSM_-5 catalyst reached 0.22 kg/kg_bio-oil with carbon selectivity of 50.7% and a nearly complete bio-oil conversion. The reaction conditions and catalyst characterization were investigated in detail to reveal the relationship between the catalyst structure and the production of olefins. The comparison between the pyrolysis and catalytic pyrolysis of bio-oil was also performed.     

Production of Low-carbon Light Olefins from Catalytic Cracking of Crude Bio-oil

Low-carbon light olefins are the basic feedstocks for the petrochemical industry. Catalytic cracking of crude bio-oil and its model compounds (including methanol, ethanol, acetic acid, acetone, and phenol) to light olefins were performed by using the La/HZSM-5 catalyst. The highest olefins yield from crude bio-oil reached 0.19 kg/(kg crude bio-oil). The reaction conditions including temperature, weight hourly space velocity, and addition of La into the HZSM-5 zeolite can be used to control both olefins yield and selectivity. Moderate adjusting the acidity with a suitable ratio between the strong acid and weak acid sites through adding La to the zeolite effectively enhanced the olefins selectivity and improved the catalyst stability. The production of light olefins from crude bio-oil is closely associated with the chemical composition and hydrogen to carbon effective ratios of feedstock. The comparison between the catalytic cracking and pyrolysis of bio-oil was studied. The mechanism of the bio-oil conversion to light olefins was also discussed.     

在Ni/HZSM-5催化剂上低温水蒸汽重整生物油制氢

We investigated high catalytic activity of Ni/HZSM-5 catalysts synthesized by the impregna-tion method, which was successfully applied for low-temperature steam reforming of bio-oil. The influences of the catalyst composition, reforming temperature and the molar ratio of steam to carbon fed on the stream reforming process of bio-oil over the Ni/HZSM-5 catalysts were investigated in the reforming reactor. The promoting effects of current passing through the catalyst on the bio-oil reforming were also studied using the electrochemical catalytic re-forming approach. By comparing Ni/HZSM-5 with commonly used Ni/Al₂O₃ catalysts, the Ni₂₀/ZSM catalyst with Ni-loading content of about 20% on the HZSM-5 support showed the highest catalytic activity. Even at 450 oC, the hydrogen yield of about 90% with a near complete conversion of bio-oil was obtained using the Ni₂₀/ZSM catalyst. It was found that the performance of the bio-oil reforming was remarkably enhanced by the HZSM-5 supporter and the current through the catalyst. The features of the Ni/HZSM-5 catalysts were also investigated via X-ray diffraction, inductively coupled plasma and atomic emission spectroscopy, hydrogen temperature-programmed reduction, and Brunauer-Emmett-Teller methods.     

ROLE OF Ga AND Pt-Ga IN THE CONVERSION OF PROPANE OVER Ga/HZSM-5 AND Pt-Ga/HZSM-5

为获得较高的Ｃ２选择性，在加水（水蒸气）条件下，研究了添加ＣａＯ对甲烷氧化偶联Ｌａ２Ｏ３催化剂的影响。发现ＣａＯ的添加提高了Ｌａ２Ｏ３催化剂的活性，同时水的添加明显地提高了催化剂的Ｃ２选择性。在加水条件下，Ｌａ２Ｏ３－ＣａＯ催化剂获得了较好的结果，其ＣＨ４转换率为２０％，Ｃ２选择性超过８０％。利用ＸＲＤ和ＸＰＳ技术对催化剂进行了表征，并对加水和不加水条件下的催化剂性能与结构变化的关系进行了讨论     

Integration of zeolite@metal–organic framework: a composite catalyst for isopropyl alcohol conversion to aromatics

In this study, a Zn-based metal-organic framework (MOF)-zeolite composite ZSM-5@IRMOF-1 was synthesized for the alternative production of BTX from isopropyl alcohol (IPA). Incorporation ensured the capacity to tune the Lewis acidity at a framework level and design accessible pore structures, making composites highly attractive to be used as catalysts. The combination of monodispersed HZSM-5 zeolites on and within acidic IRMOF-1 provided the highly selective production of lower aromatics from IPA. The interaction of IPA with catalysts was investigated at different temperatures in a fixed-bed continuous flow reactor. The obtained product was analyzed using a standard test method ASTM D6730 through gas chromatography-detail hydrocarbon analyser. The results indicated that the reaction between IPA and MOF-supported zeolite occurred without substantial participation of MOFs. The maximum aromatic (BTEX) selectivity of 38.2% was achieved among all hydrocarbons at 92.3% carbon conversion. In addition, the gas yield was <20% for this catalyst system. The appropriate density of Brønsted and Lewis acidic sites and hierarchical pore structures provided the composite catalyst with outstanding aromatic selectivity yield and high stability.     

Aromatic Compounds Production from Sorbitol by Aqueous Catalytic Reforming

The rules on regulating aromatic compounds production was investigated by aqueous cat-alytic reforming of sorbitol. It was found that aromatics, ketones, furans, organic acids were main compounds in organic phase. The obvious e ect of metal content showed that the highest carbon selectivity of aromatics was 34.36% when 3wt% Ni content was loaded on HZSM-5 zeolite modi ed by MCM-41. However, it was decreased only to 4.82% when Ni content was improved to 20wt%. Meanwhile, di erent reaction parameters also displayed important impacts on carbon selectivity. It was improved with the increase of temperature, while it was decreased as liquid hourly space velocity and hydrogen pressure was increased. The results showed that appropriate higher temperature, longer contact time and lower hy-drogen pressure were in favor of aromatics information, which suggested a feasible process to solve energy crisis.     

木质素催化转化制取苯、甲苯和二甲苯

对HZSM-5、HY和MCM-22三种催化剂进行了比较,其中HZSM-5催化裂解木质素制备苯、甲苯和二甲苯（BTX）的结果最优．确定了木质素催化裂解的最佳反应条件,包括反应温度、载气流速、催化剂／木质素配比．当反应温度为550-600℃,载气流速为300mL／min,催化剂／木质素配比为2时,使用HZSM-5催化裂解制备BTX的最高C产率和芳香选择性分别可达25．3％和90．9％。     

碱处理HZSM-5分子筛在线催化提质生物油

采用NaOH溶液对HZSM-5分子筛进行碱处理,利用XRD、SEM、BET、Py-FTIR四种方法表征改性HZSM-5分子筛,对生物原油有机相、未改性HZSM-5制得生物油有机相与改性HZSM-5制得生物油有机相进行理化特性及成分分析,研究了碱处理HZSM-5分子筛对生物油有机相产物的影响;对使用了120 min的三种失活催化剂进行了热重分析,并对焦炭峰面积进行了积分计算。结果表明,经过碱处理后的HZSM-5分子筛保留了典型的MFI拓扑结构,形成了一定数量的介孔;同时,经碱处理1 h的HZSM-5分子筛催化制得的生物油有机相产物的产率有所增加且理化特性得到提高,其产物中烃类物质的含量显著增加,达到了37.67%,且以单环芳香烃为主;同时改性HZSM-5分子筛对生物油有机相中的酸、醛及酮类物质均有较好的脱除效果,有效地降低了生物油的腐蚀性并提升了生物油的稳定性,热值达到了35.32 MJ/kg;经1 h碱处理的HZSM-5分子筛的总结焦量明显降低。     

Synthesis of Cumene from Lignin by Catalytic Transformation

Cumene is an important intermediate and chemical in chemical industry.In this work,directional preparation of cumene using lignin was achieved by a three-step cascade process.The mixture aromatics were first produced by the catalytic pyrolysis of lignin at 450℃ over 1% Zn/HZSM-5 catalyst,monocyclic aromatics with the selectivity of 85.7 wt% were obtained.Then,the catalytic dealkylation of heavier aromatics resulted in benzene-rich aromatics with 93.6 wt% benzene at 600℃ over Hβ catalyst.Finally,the cumene synthesis was performed by the aromatic alkylation,giving cumene selectivity of 91.6 C-mol% using the[bmim]Cl-2AlCl₁₃ ionic liquid at room temperature for 15 min.Besides,adding a small amount of methanol to the feed can efficiently suppress the coke yield and enhance the aromatics yield.The proposed transformation potentially provides a useful route for production of cumene using renewable lignin.     

Bio-oil from Jackfruit Peel Waste

Fossil fuels such as petroleum, charcoal, and natural gas sources are the main energy sources at present, but considering their natural limitation in availability and the fact that they are not renewable, there exists a growing need of developing bio-fuel production. Biomass has received considerable attention as a sustainable feedstock that can replace diminishing fossil fuels for the production of energy, especially for the transportation sector. JackfruitwasteisabundantinIndonesiamake itpotentiallyas one of thegreenrefineryfeedstockforthe manufacture ofbio-fuel.As intermediate of bio-fuel,jackfruitpeelsisprocessed intobio-oil. Pyrolysis, a thermochemical conversion process under oxygen-absent condition is an attractive way to convert biomass into bio- oil.In this study, the pyrolysis experiments were carried out ina fixed-bedreactor at a range of temperature of400-600 °C, heating rate range between 10-50 °C/min, and a range of nitrogen flow between 2-4litre/min. The aims of this work were to explore the effects of pyrolysis conditions and to identify the optimum condition for obtaining the highest bio-oil yield.The effect of nitrogen flow rate and heating rate on the yield of bio-oil were insignificant. The most important parameter in the bio-oil production was the temperature of the pyrolysis process.The yield of bio-oil initially increased with temperature (up to 550 °C) then further increase of temperature resulting in the decreased of bio-oil yield. Results showed that the highest bio-oil yield (52.6%)wasobtainedat 550 °C with nitrogen flow rate of 4L/min and heating rate of 50 °C/min. The thermal degradation of jackfruit peel was also studied using thermogravimetric analysis (TGA). Gas chromatography (GC-MS) was used to identify the organic fraction of bio-oil. The water content in the bio-oil product was determined by volumetric Karl-Fischer titration. The physicochemical properties of bio-oil produced from pyrolysis of jackfruit peels such as gross calorific value, pH, kinematic viscosity, density, sulfur content, ash content, pour point and flash point were determined and compared to ASTM standard of bio-oil (ASTM 7544).     

CH_4在Mo/HZSM-5及其改性催化剂上的无氧芳构化(英文)

运用微型固定床反应器装置,研究了Mo/HZSM-5催化剂的Mo载量、金属助剂改性、载体模数对甲烷无氧芳构化反应性能的影响。结果表明,Ni/Mo摩尔比为0.1的Mo-Ni/HZSM-5(SiO2/Al2O3=25)催化性能最好,其稳定性较好,芳烃收率最高可达15.74%;此时甲烷转化率60.24%,芳烃选择性26.13%。     

在反应温度下以1％O2对Mo／MCM－22催化剂的原位再生

In recent years, the catalytic dehydroaromatization of methane to yield aromatics has been a challenging and intriguing topic in heterogeneous catalysis. Until now, the two effective methane dehydroaromatization catalysts are Mo/HZSM-5[1] and Mo/MCM-22[2]. However, this reaction suffers from rapid catalyst deactivation due to coking[3].     

正丁烷在Au,Zn组合改性纳米HZSM-5上的催化转化

采用沉积沉淀和浸渍法制备了Au-Zn组合改性HZSM-5催化剂.并且对比研究了HZSM-5,Au/HZSM-5,Zn/HZSM-5和Au-Zn/HZSM-5催化剂的性质和催化性能.采用UV-Vis和XPS表征揭示出Au-Zn/HZSM-5催化剂中Au物种与Zn物种的相互作用.正丁烷探针反应结果表明,在Zn/HZSM-5催化剂中引入Au有效地提高了正丁烷的脱氢芳构化性能,同时抑制了正丁烷在Zn活性中心上的氢解副反应.在相同条件下,与Zn/HZSM-5催化剂相比,正丁烷转化率由49.1%增加到70.8%,烯烃和芳烃产物总选择性由57%增加到61.98%,干气的选择性由31%降低至28.4%.上述结果表明,Au-Zn/HZSM-5催化剂在轻烃芳构化反应中具有良好的催化性能.     

生物油模型化合物催化裂化制备芳香烃的实验研究

通过HZSM-5分子筛催化剂对生物油典型模型化合物(乙酸、愈创木酚、正庚烷和环己烷等)在550℃进行了催化裂化反应,研究模型化合物催化裂化特性和反应机理以及催化剂性质。结果表明,正庚烷和环己烷裂化产物主要是芳香烃(53%和91%,均为积分面积分数),对于此类不含氧的模型化合物,催化裂化反应过程更容易进行;随着催化剂用量的增加,可以有效增加乙酸裂化产物中芳香烃含量(12%到90%,均为积分面积分数);愈创木酚结构比较复杂,HZSM-5催化剂主要脱除了甲氧基,催化剂用量的增加可以使芳香烃类稳定物质更容易形成。     

Coking kinetics and influence of reaction-regeneration on acidity,activity and deactivation of Zn/HZSM-5 catalyst during methanol aromatization

The coking kinetics and reaction-regeneration on Zn/HZSM-5(Zn/HZ) catalyst in the conversion of methanol to aromatics were investigated.The highest initial benzene, toluene and xylene(BTX) yield of ca. 67.7% was obtained on fresh Zn/HZ catalyst, which showed the worst catalytic stability. The cycle of reaction-regeneration significantly modified the texture and acidity of Zn/HZ catalyst, which in turn affected its catalytic performance and coking behavior in methanol conversion to BTX. The residual carbon located on the surface of Zn/HZ catalyst led to the decrease of acid sites and the change on the acid sites distribution, which played an important roles on its activity and deactivation. It was found that the high B/L ratio and the low total acid sites concentration of the Zn/HZ catalyst favored to the high BTX yield and good catalytic stability in methanol conversion.     

新型多级微/介孔固态胺吸附剂的制备及其CO2吸附性能研究

将HZSM-5与MCM-41按不同质量比混合得到复合分子筛载体,以四乙烯五胺(TEPA)为改性剂,采用浸渍法将其负载到复合分子筛上,制备了一系列新型的具有多级微/介孔结构的固态胺吸附剂。采用N₂吸脱附、傅里叶变换红外光谱(FT-IR)、热重分析(TGA)等手段对吸附剂进行表征。在固定床反应器中考察了HZSM-5和MCM-41的质量比、TEPA负载量、吸附温度、进气流量和CO₂分压等因素对CO₂吸附性能的影响。结果表明,当HZSM-5与MCM-41的质量比为1:1、TEPA负载量为30%、吸附温度为55℃、进气流量为30 mL/min时,平衡吸附量高达3.57 mmol/g,且经10次吸脱附循环后,吸附量仅下降8.1%。HZSM-5/MCM-41-30%TEPA对CO₂的吸附过程包括快速的穿透吸附和相对缓慢的逐渐平衡阶段,且穿透吸附量接近于平衡吸附量的80%。HZSM-5/MCM-41-30%TEPA对CO₂的吸附过程符合Avrami动力学模型,表明CO₂吸附是物理吸附和化学吸附的结果。     

镁改性对HZSM-5分子筛催化乙烯制丙烯的影响

采用等体积浸渍法制备了一系列不同Mg含量(0–1.0%)的HZSM-5分子筛。利用X射线衍射(XRD)、N_2吸附/脱附、铝魔角旋转固体核磁共振(~(27)AlMASNMR)、~(29)SiMASNMR、氨-程序升温脱附(NH_3-TPD)和吡啶吸附傅里叶变换红外(Pyridine-IR)光谱等技术对改性前后样品的结构和酸性进行了详细表征,在常压连续流动固定床反应器上考察其对乙烯转化制丙烯(ETP)反应的催化性能,评价了反应条件和Mg改性的影响。结果表明,在温度为550°C、乙烯体积空速GHSV=3000 h~(-1)的适宜反应条件下,0.5%适量镁改性HZSM-5导致乙烯转化率有所下降,但丙烯选择性增加到45%以上,而副产物芳烃的选择性降到8%以下。反应前样品的酸性表征和反应后积碳样品的TPO及~(13)CCP/MASNMR谱图分析表明适量镁改性使HZSM-5分子筛的总酸量和强B酸量减少而中强酸量增加,从而提高了丙烯的选择性,但是过量的镁改性使分子筛的总酸量明显减少,导致催化剂的活性显著下降。     

在Ni-B非晶态催化剂作用下生物油水相加氢制备饱和醇

采用化学还原法制备了Ni-B和Ni-Co-B非晶态催化剂, 并采用X射线衍射(XRD)、BET比表面积、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和电感耦合等离子体光谱(ICP)进行了结构表征. 结果表明, 在110 ℃及氢冷压4.0 MPa时, 在Ni-B或Ni-Co-B催化下, 丙酮、糠醛和苯酚的转化率和饱和醇的选择性分别达到99.99% 和95.00%以上. 对于Ni-B催化生物油真实体系, 在150 ℃及氢冷压4.0 MPa下, 饱和醇的收率达到47.54%. 温度过高易导致催化剂转晶从而降低反应活性. 为生物油的有效利用和饱和多元醇的制备提供了新思路.     

Maximum Hydrogen Production by Autothermal Steam Reforming of Bio-oil With NiCuZnAl Catalyst

Autothermal steam reforming (ATR) of bio-oil, which couples the endothermic steam reform-ing reaction with the exothermic partial oxidation, offers many advantages from a technical and economic point of view. Effective production of hydrogen through ATR of bio-oil was performed at lower temperature with NiCuZnAl catalyst. The highest hydrogen yield from bio-oil reached 64.3% with a nearly complete bio-oil conversion at 600 oC, the ratio of steam to carbon fed (S/C) of 3 and the oxygen to carbon ratio (O/C) of 0.34. The reaction con-ditions in ATR including temperature, O/C, S/C and weight hourly space velocity can be used to control both hydrogen yield and products distribution. The comparison between the ATR and common steam reforming of bio-oil was studied. The mechanism of the ATR of bio-oil was also discussed.