Concentration‐dependent surface‐enhanced Raman scattering and molecular dynamic study of dimethyl formamide

A concentration‐dependent Raman study of dimethyl formamide (DMF) in Ag nanocolloidal solution was carried out in order to observe the effect of concentration on the surface enhancement mechanism. The Raman spectra in the region 900–2200 cm⁻¹ comprising four prominent Raman modes were measured experimentally and analyzed at five different concentrations: 1, 3, 5, 7, 10 mM , and in neat DMF. In order to find the possible configurations of DMF + Ag complexes, density functional theory (DFT) calculations were carried out taking one, three and five Ag atom clusters. The Raman spectra of unconjugated DMF, DMF + Ag and DMF + 3Ag complexes were calculated theoretically to assign the vibrational modes under consideration more accurately and to understand the wavenumber shift and change in intensity observed in experimental measurements. Water present in the colloidal solution may also conjugate with DMF and its complexes with Ag. In order to see the influence of water on the wavenumber shift and intensity changes, we have also obtained the optimized structures and Raman modes of DMF + water and DMF + water + Ag complexes. Good agreement between the experimental and theoretical wavenumber shifts has been obtained by using B3LYP functional theory and CEP‐31G basis set for the DMF + Ag complex. The experimental results suggest that the SERS enhancement is concentration‐dependent. The concentration‐dependent linewidth shows the existence of the phenomena of motional narrowing and diffusion dynamics in the colloidal solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of protoberberine alkaloids

Quaternary protoberberine alkaloids are a class of natural dyes characterized by bright colors ranging from yellow to orange. As they present a strong fluorescence emission, their analysis by Raman spectroscopy is limited to specific techniques such as Fourier transform (FT)‐Raman and spectral shift Raman techniques such as shifted subtracted Raman difference spectroscopy (SSRDS) and shifted excitation Raman difference spectroscopy (SERDS). In a previous article, we successfully used surface‐enhanced Raman scattering (SERS) in the analysis of the alkaloid dye berberine in an ancient textile. The examination of the Raman and SERS spectra of berberine in combination with density functional theory (DFT) calculations indicated a flat adsorption geometry of the molecule on the Ag surface. In this article we extend that work to the study of related protoberberine alkaloids, palmatine, jatrorrhizine, and coptisine. The same adsorption geometry as in berberine was deduced. We found that the four alkaloids, although minimally different in their chemical structures, could be differentiated by the position of marker bands. Those bands are the most enhanced ones in the SERS spectra, which appear in the 700–800 cm⁻¹ region. Copyright © 2008 John Wiley & Sons, Ltd.     

Direct observation of surface‐enhanced Raman scattering in ZnO nanocrystals

We have been able to observe the surface‐enhanced Raman scattering (SERS) from 4‐mercaptopyridine (4‐Mpy) molecules adsorbed on ZnO nanocrystals, which display 10³ enhancement factors (EFs). An excitation wavelength‐dependent behavior is clearly observed. Another molecule BVPP is also observed to have surface‐enhanced Raman signals. The chemical enhancement is most likely responsible for the observed enhancement, since plasmon resonances are ruled out. The research is important not only for a better understanding of the SERS mechanism, but also for extension of the application of Raman spectroscopy to a variety of adsorption problems on a semiconductor surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Application of surface‐enhanced Raman scattering in cell analysis

In surface‐enhanced Raman scattering (SERS), the scattered intensity is drastically increased due to a resonant interaction with surface plasmons of coin metals. SERS is a nondestructive spectroscopic method applied also to biomedical samples. It inherits the advantages of normal Raman spectroscopy and at the same time overcomes the inherent low sensitivity problem. These properties endow SERS with exciting opportunities to be a successful analytical tool for cell analysis. SERS can be used to detect only molecules located on or close to the metallic nanostructures which can support surface plasmon resonances for the enhancement of the Raman signals. Therefore, these metallic nanostructures play a key role in the application of SERS in cell analysis. By incorporating the SERS substrates into the biosamples, molecular structural probing and cellular imaging become possible. In the past decade, analysts worldwide have developed many schemes to study the chemical changes and component distribution in cells by using SERS. In this paper, the application of SERS in cell analysis is reviewed. Copyright © 2011 John Wiley & Sons, Ltd.     

Silver‐coated inverse opals formed from polystyrene spheres for surface‐enhanced Raman scattering

We have developed a new substrate for surface‐enhanced Raman scattering (SERS) measurements involving a thin silver layer deposited over an ion‐etched TiO₂ inverse opal. The latter is formed by chemically infiltrating a polystyrene opal array with TiO₂ followed by a thermal decomposition of the spheres. The SERS response of the these substrates is examined for several sphere sizes and lasers wavelengths; the results show that such substrates yield high enhance factors, comparable to substrates involving a silver layer deposited directly on a polystyrene opal array. Copyright © 2010 John Wiley & Sons, Ltd.     

Single‐molecule surface‐enhanced Raman scattering of fullerene C60

We achieved single‐molecule surface‐enhanced Raman scattering (SM‐SERS) spectra from ultralow concentrations (10⁻¹⁵ M) of fullerene C₆₀ on uniformly assembled Au nanoparticles. It was found that resonant excitation at 785 nm is a powerful tool to probe SM‐SERS in this system. The appearance of additional bands and splitting of some vibrational modes were observed because of the symmetry reduction of the adsorbed molecule and a relaxation in the surface selection rules. Time‐evolved spectral fluctuation and ‘hot spot’ dependence in the SM‐SERS spectra were demonstrated to result from the single‐molecule Raman behavior of the spherical C₆₀ on Au nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.     

pH‐sensing nanostar probe using surface‐enhanced Raman scattering (SERS): theoretical and experimental studies

Local pH environment has been considered to be a potential biomarker for tumor diagnosis because solid tumors contain highly acidic environments. A pH‐sensing nanoprobe based on surface‐enhanced Raman scattering (SERS) using nanostars under near‐infrared excitation has been developed for potential biomedical applications. To theoretically investigate the effect of protonation state on SERS spectra of p‐mercaptobenzoic acid (pMBA), we used the density functional theory (DFT) with the B3LYP functional to calculate Raman vibrational spectra of pMBA‐Au/Ag complex in both protonated and deprotonated states. Vibrational spectral bands were assigned with DFT calculation and used to investigate SERS spectral changes observed from experiment when varying pH value between five and nine. The SERS peak position of pMBA at ~1580 cm⁻¹ was identified to be a novel pH‐sensing index, which has small but noticeable downshift with pH increase. This phenomenon is confirmed and well‐explained with theoretical simulation. The study demonstrates that SERS is a sensitive tool to monitor minor structural changes due to local pH environment, and DFT calculations can be used to investigate Raman spectra changes associated with minor differences in molecular structure. Copyright © 2013 John Wiley & Sons, Ltd.     

Microstructured polymer‐based substrates with broadband absorption for surface‐enhanced Raman scattering

Large area (3 × 3 cm²) substrates for surface‐enhanced Raman scattering were fabricated by combining femtosecond laser microstructuring and soft lithography techniques. The fabrication procedure is as follows: (i) femtosecond laser machining is used to create a silicon master copy, (ii) replicates from polydimethylsiloxane are made, and (iii) a 50‐nm‐thick gold film is deposited on the surface of the replicates. The resulting substrates exhibit strongly enhanced absorption in the spectral region of 350 ∼ 1000 nm and generate enhanced Raman signal with enhancement factor of the order of 10⁷ for 10^{‐ 6} M rhodamine 6G. The main advantages of our substrates are low cost, large active area, and possibility for mass replication. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering on colloid gels originated from low molecular weight gelator

Surface‐enhanced Raman scattering (SERS) on silver and gold colloid gels formed by a low molecular weight organic gelator, bis‐(S‐phenylalanine) oxalyl amide, was obtained. Strong Raman signals dominate in the SERS spectra of hydrogels containing silver nanoparticles prepared by citrate and borohydride reduction methods, whereas broad bands of low intensity are detected in the spectra of gold colloid gels. Resemblance between Raman spectrum of the crystalline substance and the SERS spectra of the silver nanoparticle–hydrogel composites implies the electromagnetic nature of the signal enhancement. A change in Raman intensity of the benzene and amide II bands caused by an increase in temperature and concentration indicates that the gelling molecules are strongly attached through the benzene moieties to the metal nanoparticles while participating in gel formation by intermolecular hydrogen bonding between the adjacent oxalyl amide groups. Transmission electron microscopy reveals a dense gel structure in the close vicinity of the enhancing metal particles for both silver colloid gels. Copyright © 2008 John Wiley & Sons, Ltd.     

Detection and quantitative analysis of carbendazim herbicide on Ag nanoparticles via surface‐enhanced Raman scattering

Carbendazim (MBC) is a fungicide widely used in agriculture, and there are serious concerns regarding the health risks that could be caused by this fungicide. Here, we explore its ultrasensitive detection by surface‐enhanced Raman scattering (SERS). First, to obtain maximum SERS signal, the adsorption of the target molecule onto metallic surface is essential. Therefore, we study the adsorption of the MBC onto the nanoparticle surface by SERS under different experimental conditions, such as different synthesis methods of nanoparticle, variable excitation wavelength, and fungicide concentration with the aim to detect MBC at low concentrations. Experiments are carried out with three kinds of colloidal nanoparticles: Ag and Au reduced by citrate and Ag reduced by hydroxylamine. However, mainly Ag colloids are highly efficient in the SERS detection of MBC. In addition, theoretical calculations of MBC Raman spectrum and that of the surface complex are used to help with the understanding the mechanisms responsible for the interaction between MBC and Ag. Ultraviolet–visible absorption spectroscopy showed displacement to the red of the plasmon resonance of Ag colloid in the presence of MBC. Copyright © 2015 John Wiley & Sons, Ltd.     

Ultrathin silver‐coated gold nanoparticles as suitable substrate for surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) is an extremely powerful tool for the analysis of the composition of bimetallic nanoparticle (BNP) surfaces because of the different adsorption schemes adopted by several molecules on different metals, such as Au and Ag. The preparation of BNPs normally implies a change in the plasmonic properties of the core metal. However, for technological applications it could be interesting to synthesize core–shell structures preserving these original plasmonic properties. In this work, we present a facile method for coating colloidal gold nanoparticles (NPs) in solution with a very thin shell of silver. The resulting bimetallic Au@Ag system maintains the optical properties of gold but shows the chemical surface affinity of silver. The effectiveness of the coating method, as well as the progressive silver enrichment of the outermost part of the Au NPs, has been monitored through the SERS spectra of several species (chloride, luteolin, thiophenol and lucigenin), which show different behaviors on gold and silver surfaces. A growth mechanism of the Ag shell is proposed on the basis of the spectroscopic and microscopic data consisting in the formation and deposit of Ag clusters on the Au NP surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Revealing the invisible: using surface‐enhanced Raman spectroscopy to identify minute remnants of color in Winslow Homer's colorless skies

The fading of pigments in items of importance to cultural heritage, such as paintings, works of art on paper, and textiles, is a ubiquitous problem. Tools currently available that can detect and identify organic colorants in severely degraded works of art are rare, given the heavy deterioration and restricted availability of the sample. Recently, however, surface‐enhanced Raman scattering (SERS) spectroscopy has shown great promise in detecting and identifying mass‐limited samples. The art conservation field has seized upon the opportunity opened up by this powerful analytical technique to enable the identification of microscopic amounts of organic molecules used as artists' colorants in complex matrices, such as biomaterials (i.e. dyed natural textiles, linseed oil biofilms present in oil paintings, etc.), a possibility that was previously precluded due to interfering fluorescence and small sample size. Here, we report SERS spectra recorded directly on single particles of red lake pigments from an important historical watercolor by the American master Winslow Homer (1836–1910) that suffered some degree of fading. The accurate colorant identification provided by SERS, enhanced by comparison with reference samples of historical watercolors, has thus enabled important discoveries regarding the materials and intended meanings behind artworks from one of the most influential American watercolor painters. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of surface‐enhanced Raman scattering‐active ZnO/Ag composite microspheres

We show in this paper how zinc oxide (ZnO)/silver (Ag) composite microspheres can be prepared by the reduction of Ag(NH₃)₂⁺ with the reducing agent formaldehyde in aqueous solution on the surface of ZnO microspheres. During the preparation, Sn²⁺ was absorbed on the surface of ZnO microspheres for sensitization and activation, and then Ag(NH₃)₂⁺ was reduced to Ag nanoparticles by the reducing agent to obtain ZnO/Ag composite microspheres. SEM and TEM images revealed silver nanoparticles with a diameter ranging from tens to 100 nm. X‐Ray photoelectron spectra (XPS), X‐ray diffraction (XRD) patterns and UV‐vis spectra were used to characterize the structure of the ZnO/Ag composite microspheres. The origin of the surface‐enhanced Raman scattering properties was traced to the surface of the ZnO/Ag composite microspheres. The enhancement factor was estimated in detail, and the enhancement mechanism for the SERS effect was also investigated. Copyright © 2007 John Wiley & Sons, Ltd.     

Cross‐section and selection rules in surface‐enhanced hyper Raman scattering

The expression for the surface‐enhanced hyper Raman scattering (SEHRS) cross‐section of symmetrical molecules within the framework of the dipole–quadrupole theory is presented. It is formed by contributions that depend on various dipole and quadrupole moments. The enhancement coefficients for the quadrupole enhancement mechanism in some limited cases can reach a value 10³⁰. It is demonstrated that the contributions follow some selection rules. Qualitative classification of the contributions based on the enhancement degree is given. It is demonstrated that the SEHR spectra of pyrazine and pyridine can be explained by the presented theory. Copyright © 2011 John Wiley & Sons, Ltd.     

Photodissociation effects on pulsed laser deposited silver oxide thin films: surface‐enhanced resonance Raman scattering

Temporal Raman scattering measurements with 488, 532 and 632 nm excitation wavelengths and normal Raman studies by varying the power (from 30 W/cm² to 2 MW/cm²) at 488 nm were performed on silver oxide thin films prepared by pulsed‐laser deposition. Initially, silver oxide Raman spectra were observed with all three excitation wavelengths. With further increase in time and power, silver oxide photodissociated into silver nanostructures. High‐intensity spectral lines were observed at 1336 ± 25 and 1596 ± 10 cm⁻¹ with 488 nm excitation. No spectral features were observed with 633 nm excitation. Surface‐enhanced resonance Raman scattering theory is used to explain the complex behavior in the intensity of the 1336/1596 cm⁻¹ lines with varying power of 488 nm excitation. Copyright © 2011 John Wiley & Sons, Ltd.     

Ag‐nanoparticle‐modified single Ag nanowire for detection of melamine by surface‐enhanced Raman spectroscopy

Silver nanowires synthesized by a solvothermal method were used as templates for fabricating silver‐nanoparticle‐decorated silver (AgNP/Ag) nanowires. The number density and particle size of Ag nanoparticles can be controlled by varying the concentration of Ag precursor. Single AgNP/Ag nanowire exhibited strong surface‐enhanced Raman scattering effect. Detection of melamine molecules at concentrations as low as 1.0 × 10⁻⁸ M was used as an example to show the possible applications of such AgNP/Ag nanowires. Their application in rapid detection of melamine in milk solution was further demonstrated. It was shown that melamine in milk solution at a low concentration of 5.0 × 10⁻⁸ M can be easily detected with little sample pretreatment. The results demonstrate the potential of single AgNP/Ag nanowire as a surface‐enhanced Raman scattering substrate for convenient and sensitive detection of trace amounts of melamine in a complex mixture. Copyright © 2012 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering of aromatic molecules on graphene oxide

Graphene has become an ideal substrate for surface‐enhanced Raman scattering (SERS) to study the chemical enhancement mechanism. In comparison with mechanically exfoliated graphene, graphene oxide (GO) has been found to be a better substrate due to its highly negatively charged oxygen functional groups. In this work, the pH‐dependent SERS effect of aromatic molecules on GO are investigated. The results demonstrate that the Raman enhancement of dyes deposited on GO performs differently over a wide range of pH values (2 to 10). Adsorption experiments show that the pH‐dependent SERS effect is closely related to the adsorption of aromatic molecules on GO, which is dominated by the electrostatic interaction. Thus, the influence of pH in GO‐mediated SERS should be carefully considered, especially in its biomedical application. Copyright © 2012 John Wiley & Sons, Ltd.     

Deep‐UV tip‐enhanced Raman scattering

We report for the first time the tip‐enhancement of resonance Raman scattering using deep ultraviolet (DUV) excitation wavelength. The tip‐enhancement was successfully demonstrated with an aluminum‐coated silicon tip that acts as a plasmonic material in DUV wavelengths. Both the crystal violet and adenine molecules, which were used as test samples, show electronic resonance at the 266‐nm excitation used in the experiments. With results demonstrated here, molecular analysis and imaging with nanoscale spatial resolution in DUV resonance Raman spectroscopy can be realized using the tip‐enhancement effect. Copyright © 2009 John Wiley & Sons, Ltd.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Nanogaps in 2D Ag‐nanocap arrays for surface‐enhanced Raman scattering

The surface‐enhanced Raman scattering substrate of Ag–Ag nanocap arrays are prepared by depositing Ag film onto two‐dimensional (2D) polystyrene colloidal nanosphere templates. When the original colloidal arrays are used as the substrate for Ag deposition, surface‐enhanced Raman scattering (SERS) enhancements show the strong size‐dependence behaviours. When O₂‐plasma etched 2D polystyrene templates are used as the substrate for Ag deposition to form nanogaps, the gap sizes between adjacent Ag nanocaps from 5 to 20 nm generate even greater SERS enhancements. When SiO₂ coverage is deposited to isolate the Ag nanocaps from the neighbours, the SERS signals are enhanced more. The significant SERS effects are due to the coupling between Ag nanocaps controlled by the distance, which enhances the local electric‐field intensity. Copyright © 2013 John Wiley & Sons, Ltd.