RAFT polymerization of activated 4‐vinylbenzoates

The reversible addition fragmentation chain transfer (RAFT) polymerization of five active ester monomers based on 4‐vinylbenzoic acid had been investigated. Pentafluorophenyl 4‐vinylbenzoate could be polymerized under RAFT conditions yielding polymers with very good control over molecular weight and narrow molecular weight distributions. Following the synthesis of diblock copolymers consisting of polystyrene, polypentafluorostyrene, poly(4‐octylstyrene), or poly(4‐acetoxystyrene) as an inert block and poly(pentafluorophenyl 4‐vinylbenzoate) as a reactive block was successfully performed. The diblock copolymer poly(pentafluoro styrene)‐block‐poly(pentafluorophenyl 4‐vinylbenzoate) had been analyzed by ¹⁹F NMR spectroscopy in solution, demonstrating the synthetic potential of pentafluorophenyl 4‐vinylbenzoate as an extremely valuable monomer for the synthesis of highly functionalized polymeric architectures. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1696–1705, 2009     

Microphase separation in block‐random copolymers of styrene, 4‐acetoxystyrene,and 4‐hydroxystyrene

“Block‐random” copolymers—where one or more blocks are themselves random copolymers—offer a flexible modification to the usual block copolymer architecture. For example, in a poly(A)‐poly(A‐ran‐B) diblock consisting of monomer units A and B, the interblock segregation strength can be continuously tuned through the B content of the random block, allowing the design of block copolymers with accessible order‐disorder transitions at arbitrarily high molecular weights. Moreover, the development of controlled radical polymerizations has greatly expanded the palette of accessible monomer units A and B, including units with strongly interacting functional groups. We synthesize a range of copolymers consisting of styrene (S) and acetoxystyrene (AS) units, including copolymers where one block is P(S‐ran‐AS), through nitroxide‐mediated radical polymerization. At sufficiently high molecular weights, near‐symmetric PS‐PAS diblocks show well‐ordered lamellar morphologies, while dilution of the repulsive S‐AS interactions in PS‐P(S‐ran‐AS) diblocks yields a phase‐mixed morphology. Cleavage of a sufficient fraction of the AS units in a phase‐mixed PS‐P(S‐ran‐AS) diblock to hydrogen‐bonding hydroxystyrene (HS) units yields, in turn, a microphase‐separated melt. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47:2106–2113, 2009.     

A New Route for the Modification of Halogen End Groups to Amino End‐Functionalized Poly(tert‐butyl acrylate)s

The synthesis of primary amine end‐functional poly(tert‐butyl acrylate)s has been achieved by using the Gabriel reaction. Polymerization of tert‐butyl acrylate was first achieved by atom transfer radical polymerization using ethyl‐2‐bromoisobutyrate or paramethoxyphenyl‐2‐bromoisobutyrate as initiator. Both resulting polymers, with a bromide‐end atom, were converted into phthalimido intermediates which then were successfully hydrolyzed using potassium hydroxide in tert‐butyl alcohol to result in poly(tert‐butyl acrylate)s terminated by a primary amine function. End group interconversions were followed by ¹H NMR, FT‐IR, and MALDI‐TOF MS measurements. All the results proved that quantitative transformations were achieved at each step. Moreover, the method developed is very easy to carry out.

     

Poly(paraphenylene sulfide) and Poly(metaphenylene sulfide) via Light‐Initiated SRN1‐Type Polymerization of Halogenated Thiophenols

In this work, the synthesis of various halogenated thiophenol derivatives is presented. These thiophenols are used as monomers in light‐initiated S_RN1‐type radical polymerization reactions. The method provides easy access to industrially relevant poly(paraphenylene sulfide) and poly(metaphenylene sulfide). The influence of the halide leaving group and of other substituents in the thiophenol monomer on the polymerization process is investigated.

     

Synthesis of fac‐Ir(ppy)3 end‐functionalized poly(1,3‐cyclohexadiene): single monomer addition of fac‐Ir(ppy)2(vppy) for well‐controlled polymer synthesis

Synthesis of the polymer whose end is functionalized by fac‐Ir(ppy)₃ (ppy = 2‐phenylpyridyl) was achieved by using (living) anionic polymerization of 1,3‐cyclohexadiene: the reaction of poly(1,3‐cyclohexadienyl)lithium (PCHDLi) with fac‐Ir(ppy)₂(vppy) [vppy = 2‐(4‐vinylphenyl)pyridyl] resulted in nucleophilic attack of the carbanion in PCHDLi on the vinyl group of fac‐Ir(ppy)₂(vppy) selectively. Complexation of the pyridyl ring protected the α‐carbons of fac‐Ir(ppy)₂(vppy) from the reaction of the anionic polymer. The homopolymerization of fac‐Ir(ppy)₂(vppy) did not occur, and only one molecule of fac‐Ir(ppy)₂(vppy) reacted with the carbanion of PCHDLi and was selectively incorporated into an end of poly(1,3‐cyclohexadiene) (PCHD). Thus, the PCHD with fac‐Ir(ppy)₃ end‐group was obtained with a well‐controlled and defined polymer structure and molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functionalization of an ethylene–propylene copolymer with allyl(3‐isocyanate‐4‐tolyl) carbamate

An ethylene–propylene copolymer (EPM) was functionalized with an iso cyanate‐bearing unsaturated monomer, allyl(3‐isocyanate‐4‐tolyl) carbamate (TAI), with dicumyl peroxide as an initiator in a xylene solution. Fourier transform infrared (FTIR) was used to confirm the formation of EPM‐g‐TAI. The peak at 2273 cm^?1, characteristic of ? NCO groups in EPM‐g‐TAI, revealed evidence of grafting. The grafting degree was determined with both chemical titration and FTIR. The grafting degree could be adjusted, and the maximum was over 6 wt % without any gelation. The molar mass distribution of EPM‐g‐TAI was narrower than that of EPM. The rheological behavior of both EPM‐g‐TAI and EPM was investigated with a rotational rheometer. The apparent viscosity of EPM‐g‐TAI was higher than that of EPM and increased with an increasing grafting degree of TAI. Surface analysis by contact‐angle measurements showed that contact angles of EPM‐g‐TAI samples to a given polar liquid decreased with an increasing grafting degree of TAI. We also obtained the dispersion component of the surface free energy (γ), the polar component of the surface free energy (γ), and the total surface free energy (γ_S = γ + γ) of the grafted EPM. These parameters increased with the enhancement of the grafting degree, which gave us a quantitative estimation of the polar contribution of the grafted TAI to the total surface free energy of EPM‐g‐TAI. The adhesive property of EPM‐g‐TAI with aluminum foil was studied. The peeling strength between EPM‐g‐TAI plate and aluminum foil increased dramatically with an increasing content of grafted TAI in EPM‐g‐TAI. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 387–402, 2003     

9‐Bromoanthracene photodimers as initiators in controlled radical polymerization: Silane radical atom abstraction coupled with nitroxide mediated polymerization

Slow initiation relative to propagation has previously prevented photodimers of 9‐bromoanthracene or 9‐chloroanthracene, formed by [4 + 4] photocyclization reactions of the analogous 9‐haloanthracene, from being viable initiators in atom transfer radical polymerization (ATRP) reactions. The resulting polymers were found to possess high polydispersity index (PDI) values, much higher than expected number average molecular weight (M_n) values, with the reaction displaying a nonlinear relationship between monomer conversion and M_n. We report here the use of silane radical atom abstraction (SRAA) to create initiating bridgehead radicals in the presence of 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) to mediate the polymerization. When using SRAA coupled with nitroxide mediated polymerization, a dramatic decrease in PDI values was observed compared with analogous ATRP reactions, with M_n values much closer to those anticipated based on monomer‐to‐initiator ratios. Analysis using UV‐Vis spectroscopy indicated only partial anthracene labeling (～ 25%) on the polymers, consistent with thermolysis of the anthracene photodimer coupled with competition between initiation from the bridgehead photodimer radical and silane‐based radical. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6016–6022, 2008     

Synthesis,Characterization, and thermoresponsive properties of Helical Polypeptides Derivatized from Poly(γ−4‐(3‐chloropropoxycarbonyl)benzyl‐L‐glutamate)

A series of side‐chain‐functionalized α‐helical polypeptides, i.e., poly(γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamate) (6) have been prepared from n‐butylamine initiated ring‐opening polymerization (ROP) of γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamic acid‐based N‐carboxyanhydride. Polypeptides bearing oligo‐ethylene‐glycol (OEG) groups or 1‐butylimidazolium salts were prepared from 6 via copper‐mediated [2+3] alkyne‐azide 1,3‐dipolar cycloaddition or nuleophilic substitution, respectively. CD and FTIR analysis revealed that the polymers adopt α‐helical conformations both in solution and the solid state. Polymers bearing OEG (m = 3) side‐chains showed reversible LCST‐type phase transition behaviors in water while polymers bearing 1‐butylimidazolium and I^? counter‐anions exhibited reversible UCST‐type transitions in water. Variable‐temperature UV‐vis analysis revealed that the phase transition temperatures (T_pts) were dependent on the main‐chain length and polymeric concentration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2469–2480     

Controlled synthesis and chemical modification of unsaturated aliphatic (Co)polyesters based on 6,7‐dihydro‐2(3H)‐oxepinone

A pure unsaturated cyclic ester, 6,7‐dihydro‐2(3H)‐oxepinone (DHO2), was prepared by a new synthetic route. The copolymerization of DHO2 with ?‐caprolactone (?CL) was initiated by aluminum isopropoxide [Al(OⁱPr)₃] at 0 °C as an easy way to produce unsaturated aliphatic polyesters with nonconjugated C?C double bonds in a controlled manner. The chain growth was living, as certified by the agreement between the experimental molecular weight at total monomer conversion and the value predicted from the initial monomer/initiator molar ratio. The polydispersity was reasonably low (weight‐average molecular weight/number‐average molecular weight ≤ 1.2). The homopolymerization of DHO2 was, however, not controlled because of fast intramolecular transesterification. Copolymers of DHO2 and ?CL were quantitatively oxidized with the formation of epoxides containing chains. The extent of the epoxidation allowed the thermal properties and thermal stability of the copolyesters to be modulated. The epoxidized copolyesters were successfully converted into thioaminated chains, which were then quaternized into polycations. No degradation occurred during the chemical modification. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2286–2297, 2002     

Construction of hydroxyl‐terminated poly(N‐isopropylacrylamide) brushes on silicon wafer via surface‐initiated atom transfer radical polymerization

Surface‐initiated atom transfer radical polymerization (SI‐ATRP) of N‐isopropylacrylamide (NIPAM) on silicon wafer in the presence of 2‐mercaptoethanol (ME) chain transfer agent was conducted in attempt to create controllable hydroxyl‐terminated brushes. The initiator‐immobilized substrate, was prepared by the esterification of hydroxyl groups on silicon wafer with 2‐bromopropionyl bromide (2‐BPB); followed by the ATRP of NIPAM using a catalyst system, that is, Cu(I)Br/2,2′‐bipyridine (2,2′‐bpy) and a chain transfer agent, that is, ME. The formation of homogeneous tethered poly(N‐isopropylacrylamide) (poly(NIPAM) brushes with hydroxyl end‐group, whose thickness can be tuned by chancing ME concentration, is evidenced by using the combination of grazing angle attenuated total reflectance‐Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, ellipsometry, atomic force microscopy, gel permeation chromatography, and water contact‐angle measurements. The calculation of grafting parameters from experimental measurements indicated the synthesis of densely grafted poly(NIPAM) films with hydroxyl end‐group on silicon wafer and allowed us to predict a ME concentration for forming a “brush” conformation for the chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3880–3887, 2010     

Synthesis,kinetic study,and application of Ti[O(CH2)4OCHCH2]4 in ring‐opening polymerization of ε‐caprolactone and radical polymerization

Ti[O(CH₂)₄OCH?CH₂]₄, used for the ring‐opening polymerization (ROP) of ε‐caprolactone, was synthesized through the ester‐exchange reaction of titanium n‐propoxide and 1,4‐butanediol vinyl ether, and its chemical structure was confirmed by nuclear magnetic resonance (¹H NMR) and thermogravimetric analysis (TGA). The mechanism and kinetics of Ti[O(CH₂)₄OCH?CH₂]₄‐initiated bulk polymerization of ε‐caprolactone were investigated. The results demonstrate that Ti[O (CH₂)₄OCH?CH₂]₄‐initiated polymerization of ε‐caprolactone proceeds through the coordination‐insertion mechanism, and all the four alkoxide arms in Ti[O (CH₂)₄OCH?CH₂]₄ share a similar activity in initiating ROP of ε‐caprolactone. The polymerization process can be well predicted by the obtained kinetic parameters, and the activation energy is 106 KJ/mol. Then, the rheological method was employed to investigate the feasibility of producing the crosslinked poly(ε‐caprolactone)‐poly (n‐butyl acrylate) network by using Ti[O(CH₂)₄OCH?CH₂]₄ as the ROP initiator. The tensile test demonstrates that the in situ generated crosslinked PCL‐PBA network in PMMA matrix provides the possibility of ameliorating the tensile properties of PMMA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7773–7784, 2008     

Perfluorophenyl azide functionalization of electrospun poly(para‐dioxanone)

Strategies to surface‐functionalize scaffolds by covalent binding of biologically active compounds are of fundamental interest to control the interactions between scaffolds and biomolecules or cells. Poly(para‐dioxanone) (PPDO) is a clinically established polymer that has shown potential as temporary implant, eg, for the reconstruction of the inferior vena cava, as a nonwoven fiber mesh. However, PPDO lacks suitable chemical groups for covalent functionalization. Furthermore, PPDO is highly sensitive to hydrolysis, reflected by short in vivo half‐life times and degradation during storage. Establishing a method for covalent functionalization without degradation of this hydrolyzable polymer is therefore important to enable the surface tailoring for tissue engineering applications. It was hypothesized that treatment of PPDO with an N‐hydroxysuccinimide ester group bearing perfluorophenyl azide (PFPA) under UV irradiation would allow efficient surface functionalization of the scaffold. X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier‐transformed infrared spectroscopy investigation revealed the successful binding, while a gel permeation chromatography study showed that degradation did not occur under these conditions. Coupling of a rhodamine dye to the N‐hydroxysuccinimide esters on the surface of a PFPA‐functionalized scaffold via its amine linker showed a homogenous staining of the PPDO in laser confocal microscopy. The PFPA method is therefore applicable even to the surface functionalization of hydrolytically labile polymers, and it was demonstrated that PFPA chemistry may serve as a versatile tool for the (bio‐)functionalization of PPDO scaffolds.     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Synthesis of Poly(ethylene oxide)s with 1,2,4‐Triazol‐4‐yl End Groups – Macroligands for Bistable Metal‐Polymer Complexes

Summary: Poly(ethylene oxide) methyl ether 4H‐1,2,4‐triazol‐4‐yl ( 1 ) has been synthesized as a novel macroligand. ESI‐MS (electrospray ionisation mass spectrometry), MALDI‐TOF (matrix‐assisted laser desorption ionisation time‐of‐flight) MS as well as NMR spectroscopy were used for the accurate determination of number‐average molecular weights ( ), the crucial parameter for subsequent synthesis of metal‐polymer complexes of four different samples 1a – d . Reaction of polymer 1a with [Fe(H₂O)₆](nps)₂ (nps = 3‐nitrophenylsulfonate) gave [Fe( 1a )₃](nps)₂, a bistable metal‐polymer complex that exhibited low‐spin (LS) to high‐spin (HS) transitions around T_1/2 = 257 K, accompanied by a change in colour from violet (LS) to slightly yellow (HS).

The structure of [Fe( 1a )₃](nps)₂ and its magnetic properties.     

Synthesis and characterization of novel biodegradable block copolymer poly(ethylene glycol)‐block‐poly(L‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylene carbonate)

An amphiphilic block copolymer, poly(ethylene glycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate) [PEG‐b‐P(LA‐co‐MBC)], was synthesized in bulk by the ring‐opening polymerization of L ‐lactide with 2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate (MBC) in the presence of poly(ethylene glycol) as a macroinitiator with diethyl zinc as a catalyst. The subsequent catalytic hydrogenation of PEG‐b‐P(LA‐co‐MBC) with palladium hydroxide on activated charcoal (20%) as a catalyst was carried out to obtain the corresponding linear copolymer poly(ethyleneglycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylenecarbonate) [PEG‐b‐P(LA‐co‐MCC)] with pendant carboxyl groups. DSC analysis indicated that the glass‐transition temperature (T_g) of PEG‐b‐P(LA‐co‐MBC) decreased with increasing MBC content in the copolymer, and T_g of PEG‐b‐P(LA‐co‐MCC) was higher than that of the corresponding PEG‐b‐P(LA‐co‐MBC). The in vitro degradation rate of PEG‐b‐P(LA‐co‐MCC) in the presence of proteinase K was faster than that of PEG‐b‐P(LA‐co‐MBC), and the cytotoxicity of PEG‐b‐P(LA‐co‐MCC) to chondrocytes from human fetal arthrosis was lower than that of poly(L ‐lactide). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4771–4780, 2005     

Synthesis of polymeric 1‐iminopyridinium ylides as photoreactive polymers

Two synthetic routes to polymeric 1‐imino pyridinium ylides as new photoreactive polymeric architectures were investigated. In the first approach, polymerization of newly synthesized 1‐imino pyridinium ylide containing monomers yielding their polymeric analogues was achieved by free radical polymerization. Alternatively, reactive precursor polymers were synthesized and converted into the respective 1‐imino pyridinium ylide polymers by polymer analogous reactions on reactive precursor polymers. Quantitative conversion of the reactive groups was achieved with pentafluorophenyl ester containing polymers and newly synthesized photoreactive amines as well as by the reaction of poly(4‐vinylbenzoyl azide) with a photoreactive alcohol. The polymers obtained by both routes were examined regarding their photoreaction products and kinetics in solution as well as in thin polymer films. Contact angle measurements of water on the polymer films before and after irradiation showed dramatic changes in the hydrophilicity of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 832–844, 2010     

New Strategy Targeting Well‐Defined Polymethylene‐block‐Polystyrene Copolymers: The Combination of Living Polymerization of Ylides and Atom Transfer Radical Polymerization

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by ¹H NMR and DSC.

     

Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386     

Easy synthesis and ring‐opening polymerization of 5‐Z‐amino‐δ‐valerolactone: New degradable amino‐functionalized (Co)polyesters

Novel 5‐Z‐amino‐δ‐valerolactone (5‐NHZ‐VL) was synthesized with an aim to prepare degradable polyesters and copolyesters having amino pendant groups. Following a straightforward and efficient synthetic pathway, 5‐NHZ‐VL was obtained in only two steps and up to 50% yield. The monomer was fully characterized by ¹H NMR, ¹³C NMR, ESI mass spectrometry, and HPLC. Various conventional conditions were tested for this lactone ring‐opening polymerization and led to the novel corresponding poly(5‐NHZ‐VL) (M_n = 7000 g/mol; PD = 1.2). Following this homopolymerization, 5‐NHZ‐VL was copolymerized with ε‐caprolactone to generate a family of copolyesters with an amino‐group content ranging from 10 to 80%. Finally, the polyelectrolyte poly(5‐NH₃⁺‐VL) was recovered by removal of the protecting group under acidic conditions, and integrity of the polyester backbone was confirmed by ¹H NMR. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010