Acid–base interactions between formamide and tetrahydrofuran molecules: Raman investigation of speciation in a binary system of biological interest

Raman spectra of formamide (FA) and tetrahydrofuran (THF) mixtures at different compositions were obtained. The appearance of new bands at 897 and 1612 cm⁻¹, whose intensities show large dependence on the FA concentration, are assigned to an FA–THF adduct. This assignment is supported by the Lewis acid–base theory, where the two H‐bond donor sites of FA and the strong donor character of THF became the environment propitious for the donor‐acceptor reaction. Quantitative measurements performed in the band envelope at ∼915 cm⁻¹ allowed to determine the stoichiometry of the Lewis acid–base adduct. The experimental evidence of the 2:1 FA–THF adduct is presented for the first time using Raman spectroscopy and our results show an excellent agreement with similar systems. The present work also shows hydrogen interactions which can be involved in systems containing peptide groups and constituents of nucleic acids. Copyright © 2008 John Wiley & Sons, Ltd.     

Preferential interactions in the formamide/ tetrahydrofuran/dioxane system: a study by Raman spectroscopy

Significant changes observed in the Raman spectra of formamide (FA)–tetrahydrofuran (THF)–dioxane (DX) mixtures have been interpreted in terms of preferential interactions. The Gutmann's donor (DN) and acceptor (AN) number values of these solvents give a good interpretation for the differences observed. In the ternary system, THF behaves as a stronger base than DX and the band at ∼442 cm⁻¹, recently assigned to the FA–DX adduct is only observed at the highest FA concentration. Quantitative analyses performed at the C (FA) and C O (THF) stretching regions show that the extent of the association for the [FA]_n adduct is significantly larger than for the FA THF adduct. Electrostatic parameters, such as dipole moment and dielectric constant, are also regarded as a better interpretation of these associations. The good correlation between DN and electrostatic parameters indicates that the basic strength increases in the order DX < THF < FA. Copyright © 2008 John Wiley & Sons, Ltd.     

Investigating the formation of an adduct of formamide with dioxane by means of Raman spectroscopy

Raman experiments of formamide (FA) and p‐dioxane (DX) mixtures at different compositions were carried out. A red shift of the C O stretching band of DX was observed upon dilution, while blue shifts were observed for the C H stretching and C O C bending bands. In this latter region, the new band at ∼441 cm⁻¹, whose intensity shows large dependence on the FA concentration, has been assigned to an FA–DX adduct and it is reported for the first time in the literature. The spectral changes observed in the C O C bending region allowed to determine a proportion of 4:1 FA–DX and this experimental evidence is also presented for the first time by Raman spectroscopy. The present work shows an excellent agreement with our previous investigation, where the 2:1 FA—THF (tetrahydrofuran) adduct was characterized. Copyright © 2008 John Wiley & Sons, Ltd.     

FT‐Raman,FTIR and density functional theory studies of a hydrogen‐bonded formamide:pyridine complex

Raman and IR experiments have been carried out on formamide (FA) and pyridine (Py) mixtures at different compositions. The appearance of a new Raman band at 996 cm⁻¹ (ν₁ region of Py), whose intensity depends on the FA concentration, is assigned to an FA:Py adduct and this result is in excellent agreement with those of other authors who employed noisy light‐based coherent Raman scattering spectroscopy (I⁽²⁾ CARS). Another band at 1587 cm⁻¹ (ν₈ region of Py) has been observed for the first time by using Raman and IR spectroscopies. Its intensity shows the same dependence on the FA concentration and this fact allows us to also attribute it to an FA:Py adduct. The good relationship between the Raman and IR data demonstrates the potential of the vibrational spectroscopy for this kind of study. Owing to higher absolute Raman scattering cross section, the ν₁ region of Py has been chosen for the quantitative analysis and a stoichiometry of 1:1 FA:Py is reported. The experimental data are very well supported by the density functional theory (DFT) calculation, which was employed for the first time to the present system. Furthermore, the actual investigation shows an excellent agreement with those reported from computational calculations for similar systems. A comparison with our previous studies confirms that the solvent dielectric constant determines the stoichiometry of a given Lewis acid–base adduct in the infinite dilution limit. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of sodium alginate and its block fractions by surface‐enhanced Raman spectroscopy

The surface‐enhanced Raman scattering (SERS) of sodium alginates and their hetero‐ and homopolymeric fractions obtained from four seaweeds of the Chilean coast was studied. Alginic acid is a copolymer of β‐D ‐mannuronic acid (M) and α‐L guluronic acid (G), linked 1 → 4, forming two homopolymeric fractions (MM and GG) and a heteropolymeric fraction (MG). The SERS spectra were registered on silver colloid with the 632.8 nm line of a He Ne laser. The SERS spectra of sodium alginate and the polyguluronate fraction present various carboxylate bands which are probably due to the coexistence of different molecular conformations. SERS allows to differentiate the hetero‐ and homopolymeric fractions of alginic acid by characteristic bands. In the fingerprint region, all the poly‐D ‐mannuronate samples present a band around 946 cm⁻¹ assigned to C O stretching, and C C H and C O H deformation vibrations, a band at 863 cm⁻¹ assigned to deformation vibration of β‐C₁ H group, and one at 799–788 cm⁻¹ due to the contributions of various vibration modes. Poly‐L ‐guluronate spectra show three characteristic bands, at 928–913 cm⁻¹ assigned to symmetric stretching vibration of C O C group, at 890–889 cm⁻¹ due to C C H, skeletal C C, and C O vibrations, and at 797 cm⁻¹ assigned to α C₁ H deformation vibration. The heteropolymeric fractions present two characteristic bands in the region with the more important one being an intense band at 730 cm⁻¹ due to ring breathing vibration mode. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the antimonate mineral brandholzite Mg[Sb2(OH)12]·6H2O

Raman spectra of brandholzite Mg[Sb₂(OH)₁₂]·6H₂O were studied, complemented with infrared spectra, and related to the structure of the mineral. An intense Raman sharp band at 618 cm⁻¹ is attributed to the SbO symmetric stretching mode. The low‐intensity band at 730 cm⁻¹ is ascribed to the SbO antisymmetric stretching vibration. Low‐intensity Raman bands were found at 503, 526 and 578 cm⁻¹. Corresponding infrared bands were observed at 527, 600, 637, 693, 741 and 788 cm⁻¹. Four Raman bands observed at 1043, 1092, 1160 and 1189 cm⁻¹ and eight infrared bands at 963, 1027, 1055, 1075, 1108, 1128, 1156 and 1196 cm⁻¹ are assigned to δ SbOH deformation modes. A complex pattern resulting from the overlapping band of the water and hydroxyl units is observed. Raman bands are observed at 3240, 3383, 3466, 3483 and 3552 cm⁻¹; infrared bands at 3248, 3434 and 3565 cm⁻¹. The Raman bands at 3240 and 3383 cm⁻¹ and the infrared band at 3248 cm⁻¹ are assigned to water‐stretching vibrations. The two higher wavenumber Raman bands observed at 3466 and 3552 cm⁻¹ and two infrared bands at 3434 and 3565 cm⁻¹ are assigned to the stretching vibrations of the hydroxyl units. Observed Raman and infrared bands in the OH stretching region are associated with O‐H···O hydrogen bonds and their lengths 2.72, 2.79, 2.86, 2.88 and 3.0 Å (Raman) and 2.73, 2.83 and 3.07 Å (infrared). Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the magnesium carbonate mineral hydromagnesite (Mg5[(CO3)4(OH)2]· 4H2O)

Magnesium minerals are important for understanding the concept of geosequestration. One method of studying the hydrated hydroxy magnesium carbonate minerals is through vibrational spectroscopy. A combination of Raman and infrared spectroscopy has been used to study the mineral hydromagnesite. An intense band is observed at 1121 cm⁻¹, attributed to the CO₃²⁻ν₁ symmetric stretching mode. A series of infrared bands at 1387, 1413 and 1474 cm⁻¹ are assigned to the CO₃²⁻ν₃ antisymmetric stretching modes. The CO₃²⁻ν₃ antisymmetric stretching vibrations are extremely weak in the Raman spectrum and are observed at 1404, 1451, 1490 and 1520 cm⁻¹. A series of Raman bands at 708, 716, 728 and 758 cm⁻¹ are assigned to the CO₃²⁻ν₂ in‐plane bending mode. The Raman spectrum in the OH stretching region is characterized by bands at 3416, 3516 and 3447 cm⁻¹. In the infrared spectrum, a broad band is found at 2940 cm⁻¹, which is assigned to water stretching vibrations. Infrared bands at 3430, 3446, 3511, 2648 and 3685 cm⁻¹ are attributed to MgOH stretching modes. Copyright © 2011 John Wiley & Sons, Ltd.     

OctTES/TEOS system for hybrid coatings: real‐time monitoring of the hydrolysis and condensation by Raman spectroscopy

The hybrid organic–inorganic system Tetra‐ethyl‐ortho‐silicate functionalized with Octyl‐triethoxy‐silane, studied as protective coating for the preservation of historical glasses from the environmental weathering agents, has been characterized by Raman spectroscopy by monitoring the sol‐gel reactions over time through characteristic features in the spectrum. In particular, for the hydrolysis reaction the disappearance of the 653 cm⁻¹ (Si‐O symmetric breathing) and 810 cm⁻¹ (CH₂ rocking in Si‐alkoxides) peaks and the growth of the 710 cm⁻¹ band, because of hydrolyzed alkyl‐silane, and of the 881 cm⁻¹ peak (ethanol C–C symmetric stretching) have been checked. Moreover, the condensation reaction can be tracked by the disappearance of the two main peaks of the alcohols at 816 and 881 cm⁻¹, going along with the growth of the broad band between 250 and 500 cm⁻¹ (Si–O–Si symmetric bending) and of the feature at 840 cm⁻¹ (Si–O–Si stretching). At the end of the condensation process the Raman spectrum still displays spectral bands unique to the alkyl chain in Octyl‐triethoxy‐silane, in the 1330–1450 cm⁻¹ and 2725–3000 cm⁻¹ ranges. Copyright © 2016 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the antimonate mineral bottinoite Ni[Sb2(OH)12]·6H2O and in comparison with brandholzite Mg[Sb5+2(OH)12]·6H2O

Raman spectroscopy was used to study the mineral bottinoite and a comparison with the Raman spectra of brandholzite was made. An intense sharp Raman band at 618 cm⁻¹ is attributed to the SbO symmetric stretching mode. The low intensity band at 735 cm⁻¹ is ascribed to the SbO antisymmetric stretching vibration. Low intensity Raman bands were found at 501, 516 and 578 cm⁻¹. Four Raman bands observed at 1045, 1080, 1111 and 1163 cm⁻¹ are assigned to δ SbOH deformation modes. A complex pattern resulting from the overlapping band of the water and hydroxyl units is observed. Raman bands are observed at 3223, 3228, 3368, 3291, 3458 and 3510 cm⁻¹. The first two Raman bands are assigned to water stretching vibrations. The two higher wavenumber Raman bands observed at 3466 and 3552 cm⁻¹ and two infrared bands at 3434 and 3565 cm⁻¹ are assigned to the stretching vibrations of the hydroxyl units. Observed Raman and infrared bands are connected with O H···O hydrogen bonds and their lengths 2.72, 2.79, 2.86, 2.88 and 3.0 Å (Raman) and 2.73, 2.83 and 3.07 Å (infrared). Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the magnesium‐carbonate minerals—artinite and dypingite

Magnesium minerals are important in the understanding of the concept of geosequestration. The two hydrated hydroxy magnesium‐carbonate minerals artinite and dypingite were studied by Raman spectroscopy. Intense bands are observed at 1092 cm⁻¹ for artinite and at 1120 cm⁻¹ for dypingite, attributed ν₁ symmetric stretching mode of CO₃²⁻. The ν₃ antisymmetric stretching vibrations of CO₃²⁻ are extremely weak and are observed at 1412 and 1465 cm⁻¹ for artinite and at 1366, 1447 and 1524 cm⁻¹ for dypingite. Very weak Raman bands at 790 cm⁻¹ for artinite and 800 cm⁻¹ for dypingite are assigned to the CO₃²⁻ν₂ out‐of‐plane bend. The Raman band at 700 cm⁻¹ of artinite and at 725 and 760 cm⁻¹ of dypingite are ascribed to CO₃²⁻ν₂ in‐plane bending mode. The Raman spectrum of artinite in the OH stretching region is characterised by two sets of bands: (1) an intense band at 3593 cm⁻¹ assigned to the MgOH stretching vibrations and (2) the broad profile of overlapping bands at 3030 and 3229 cm⁻¹ attributed to water stretching vibrations. X‐ray diffraction studies show that the minerals are disordered. This is reflected in the difficulty of obtaining Raman spectra of reasonable quality, and explains why the Raman spectra of these minerals have not been previously or sufficiently described. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopy of smithsonite

Raman spectroscopy at both 298 and 77 K has been used to study a series of selected natural smithsonites from different origins. An intense sharp band at 1092 cm⁻¹ is assigned to the CO₃²⁻ symmetric stretching vibration. Impurities of hydrozincite are identified by a band around 1060 cm⁻¹. An additional band at 1088 cm⁻¹ which is observed in the 298 K spectra but not in the 77 K spectra is attributed to a CO₃²⁻ hot band. Raman spectra of smithsonite show a single band in the 1405–1409 cm⁻¹ range assigned to the ν₃ (CO₃)²⁻ antisymmetric stretching mode. The observation of additional bands for the ν₃^g modes for some smithsonites is significant in that it shows distortion of the ZnO₆ octahedron. No ν₂ bending modes are observed for smithsonite. A single band at 730 cm⁻¹ is assigned to the ν₄ in phase bending mode. Multiple bands be attributed to the structural distortion are observed for the carbonate ν₄ in phase bending modes in the Raman spectrum of hydrozincite with bands at 733, 707 and 636 cm⁻¹. An intense band at 304 cm⁻¹ is attributed to the ZnO symmetric stretching vibration. Copyright © 2007 John Wiley & Sons, Ltd.     

Dussertite BaFe3+3(AsO4)2(OH)5—a Raman spectroscopic study of a hydroxy‐arsenate mineral

The mineral dussertite, a hydroxy‐arsenate mineral with formula BaFe³⁺₃(AsO₄)₂(OH)₅, has been studied by Raman spectroscopy complemented with infrared spectroscopy. The spectra of three minerals from different origins were investigated and proved to be quite similar, although some minor differences were observed. In the Raman spectra of the Czech dussertite, four bands are observed in the 800–950 cm⁻¹ region. The bands are assigned as follows: the band at 902 cm⁻¹ is assigned to the (AsO₄)³⁻ν₃ antisymmetric stretching mode, the one at 870 cm⁻¹ to the (AsO₄)³⁻ν₁ symmetric stretching mode, and those at 859 and 825 cm⁻¹ to the As‐OM^{2 + /3+} stretching modes and/or hydroxyl bending modes. Raman bands at 372 and 409 cm⁻¹ are attributed to the ν₂ (AsO₄)³⁻ bending mode and the two bands at 429 and 474 cm⁻¹ are assigned to the ν₄ (AsO₄)³⁻ bending mode. An intense band at 3446 cm⁻¹ in the infrared spectrum and a complex set of bands centred upon 3453 cm⁻¹ in the Raman spectrum are attributed to the stretching vibrations of the hydrogen‐bonded (OH)⁻ units and/or water units in the mineral structure. The broad infrared band at 3223 cm⁻¹ is assigned to the vibrations of hydrogen‐bonded water molecules. Raman spectroscopy identified Raman bands attributable to (AsO₄)³⁻ and (AsO₃OH)²⁻ units. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopy of halogen‐containing carbonates

Raman spectroscopy complemented with infrared spectroscopy has been used to study a series of selected natural halogenated carbonates from different origins, including bastnasite, parisite and northupite. The position of CO₃²⁻ symmetric stretching vibration varies with the mineral composition. An additional band for northupite at 1107 cm⁻¹ is observed. Raman spectra of bastnasite, parisite and northupite show single bands at 1433, 1420 and 1554 cm⁻¹, respectively, assigned to the ν₃ (CO₃)²⁻ asymmetric stretching mode. The observation of additional Raman bands for the ν₃ modes for some halogenated carbonates is significant in that it shows distortion of the CaO₆ octahedron. No ν₂ Raman bending modes are observed for these minerals. The band is observed in the infrared spectra, and multiple ν₂ modes at 844 and 867 cm⁻¹ are observed for parisite. A single intense infrared band is found at 879 cm⁻¹ for northupite. Raman bands are observed forthe carbonate ν₄ in‐phase bending modes at 722 cm⁻¹ for bastnasite, 736 and 684 cm⁻¹ for parisite and 714 cm⁻¹ for northupite. Multiple bands are observed in the OH stretching region for selected bastansites and parisites, indicating the presence of water and OH units in the mineral structure. The presence of such bands brings into question the actual formula of these halogenated carbonate minerals. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the hydrogen‐arsenate mineral pharmacolite Ca(AsO3OH)·2H2O—implications for aquifer and sediment remediation

The removal of arsenate anions from aqueous media, sediments and wasted soils is of environmental significance. The reaction of gypsum with the arsenate anion results in pharmacolite mineral formation, together with related minerals. Raman and infrared (IR) spectroscopy have been used to study the mineral pharmacolite Ca(AsO₃OH)· 2H₂O. The mineral is characterised by an intense Raman band at 865 cm⁻¹ assigned to the ν₁ (AsO₃)²⁻ symmetric stretching mode. The equivalent IR band is found at 864 cm⁻¹. The low‐intensity Raman bands in the range from 844 to 886 cm⁻¹ provide evidence for ν₃ (AsO₃) antisymmetric stretching vibrations. A series of overlapping bands in the 300‐450 cm⁻¹ region are attributed to ν₂ and ν₄ (AsO₃) bending modes. Prominent Raman bands at around 3187 cm⁻¹ are assigned to the OH stretching vibrations of hydrogen‐bonded water molecules and the two sharp bands at 3425 and 3526 cm⁻¹ to the OH stretching vibrations of only weakly hydrogen‐bonded hydroxyls in (AsO₃OH)²⁻ units. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the antimonate mineral bahianite Al5Sb35+O14(OH)2

Raman spectroscopy has been used to characterize the antimonate mineral bahianite Al₅Sb₃⁵⁺O₁₄(OH)₂, a semi‐precious gemstone. The mineral is characterized by an intense Raman band at 818 cm⁻¹ assigned to Sb₃O₁₄¹³⁻ stretching vibrations. Other lower intensity bands at 843 and 856 cm⁻¹ are also assigned to this vibration, and this concept suggests the non‐equivalence of SbO units in the structure. Low‐intensity Raman bands at 669 and 682 cm⁻¹ are probably assignable to the OSbO antisymmetric stretching vibrations. Raman bands at 1756, 1808 and 1929 cm⁻¹ may be assigned to δ SbOH deformation modes, while the bands at 3462 and 3495 cm⁻¹ are assigned to AlOH stretching vibrations. The complexity in the low wave number region is attributed to the composition of the mineral. Copyright © 2009 John Wiley & Sons, Ltd.     

Vibrational studies of polar aprotic molecule in aromatic chemical and isotropic solvents: experimental and quantum chemical investigations

Raman spectroscopic technique has been used to study the intermolecular interactions and dynamics of SO, C―H and CSC stretching modes of dimethyl sulfoxide (DMSO) in binary mixtures using methyl benzene (MBN) and deuterated methyl benzene (MBNd) aromatic solvents. The Raman band of SO stretching mode has been deconvoluted into four distinct bands for neat DMSO as well as in binary mixtures. Deconvoluted bands in neat DMSO were assigned as monomer, cyclic out‐of‐phase, cyclic in‐phase and chain dimers having peak wavenumbers 1069.10, 1056.60, 1041.50 and 1027.30 cm⁻¹ respectively. Peak wavenumber of SO stretching mode shows red shift, while peak wavenumbers of C―H and CSC stretching modes show blue shift with the increase in solvent concentration. The vibrational relaxation phenomena for all the stretching modes have been studied as a function of solvent concentration. Quantum‐chemical calculations have been carried out to gain more insight into the self‐association of DMSO and in interacting environment with the solvents using ab initio and density functional theory method. The ab initio basis set is HF/6‐31 + G (d, p) for the interacting system. The hydrogen bond complexes of DMSO with MBN and MBNd using IEF‐PCM model have been calculated using B3LYP functional and 6‐31 + G(d,p) basis sets. Theoretical calculations have been compared with the experimental findings and we obtained good coherence of the results. Copyright © 2015 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the mineral finnemanite Pb5(As3+O3)3Cl

The arsenite mineral finnemanite Pb₅(As³⁺ O₃)₃Cl has been studied by Raman spectroscopy. The most intense Raman band at 871 cm⁻¹ is assigned to the ν₁(AsO₃)³⁻ symmetric stretching vibration. Three Raman bands at 898, 908 and 947 cm⁻¹ are assigned to the ν₃(AsO₃)³⁻ antisymmetric stretching vibration. The observation of multiple antisymmetric stretching vibrations suggest that the (AsO₃)³⁻ units are not equivalent in the molecular structure of finnemanite. Two Raman bands at 383 and 399 cm⁻¹are assigned to the ν₂(AsO₃)³⁻ bending modes. Density functional theory enabled calculation of the position of AsO₃²⁻ symmetric stretching mode at 839 cm⁻¹, the antisymmetric stretching mode at 813 cm⁻¹ and the deformation mode at 449 cm⁻¹. Raman bands are observed at 115, 145, 162, 176, 192, 216 and 234 cm⁻¹ as well. The two most intense bands are observed at 176 and 192 cm⁻¹. These bands are assigned to PbCl stretching vibrations and result from transverse/longitudinal splitting. The bands at 145 and 162 cm⁻¹ may be assigned to Cl Pb Cl bending modes. Copyright © 2009 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of the antimony mineral klebelsbergite Sb4O4(OH)2(SO4)

Many minerals based upon antimonite and antimonate anions remain to be studied. Most of the bands occur in the low wavenumber region, making the use of infrared spectroscopy difficult. This problem can be overcome by using Raman spectroscopy. The Raman spectra of the mineral klebelsbergite Sb₄O₄(OH)₂(SO₄) were studied and related to the structure of the mineral. The Raman band observed at 971 cm⁻¹ and a series of overlapping bands are observed at 1029, 1074, 1089, 1139 and 1142 cm⁻¹ are assigned to the SO₄²⁻ν₁ symmetric and ν₃ antisymmetric stretching modes, respectively. Two Raman bands are observed at 662 and 723 cm⁻¹, which are assigned to the Sb O ν₃ antisymmetric and ν₁ symmetric stretching modes, respectively. The intense Raman bands at 581, 604 and 611 cm⁻¹ are assigned to the ν₄ SO₄²⁻ bending modes. Two overlapping bands at 481 and 489 cm⁻¹ are assigned to the ν₂ SO₄²⁻ bending mode. Low‐intensity bands at 410, 435 and 446 cm⁻¹ may be attributed to O Sb O bending modes. The Raman band at 3435 cm⁻¹ is attributed to the O H stretching vibration of the OH units. Multiple Raman bands for both SO₄²⁻ and Sb O stretching vibrations support the concept of the non‐equivalence of these units in the klebelsbergite structure. It is proposed that the two sulfate anions are distorted to different extents in the klebelsbergite structure. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the schmiederite Pb2Cu2[(OH)4|SeO3|SeO4]

Raman spectroscopy lends itself to the studies of selenites, selenates, tellurites and tellurates as well as related minerals. The mineral schmiederite Pb₂Cu₂[(OH)₄|SeO₃|SeO₄], is interesting, in that, both selenite and selenate anions occur in the structure. Raman bands of schmiederite at 1095 and 934 cm⁻¹ are assigned to the symmetric and antisymmetric mode of the (SeO₄)²⁻ anions. For selenites, the symmetric stretching mode occurs at a higher position than the antisymmetric stretching mode, as is evidenced in the Raman spectrum of schmiederite. The band at 834 cm⁻¹ is assigned to the symmetric (SeO₃)²⁻ units. The two bands at 764 and 739 cm⁻¹ are attributed to the antisymmetric (SeO₃)²⁻ units. An intense, sharp band at 398 cm⁻¹ is assigned to the ν₂ bending mode. The two bands at 1576 and 1604 cm⁻¹ are assigned to the deformation modes of the OH units. The observation of multiple OH bands supports the concept of a much distorted structure. This is based upon the four OH units coordinating the copper in a square planar structure. A single symmetric Raman band is observed at 3428 cm⁻¹ and is assigned to the symmetric stretching mode of the OH units. The observation of multiple infrared OH stretching bands supports the concept of non‐equivalent OH units in the schmiederite structure. Copyright © 2008 John Wiley & Sons, Ltd.     

Overlapping spectral features and new assignment of 2‐propanol in the C–H stretching region

The vibrational spectra of gaseous and liquid 2‐propanol in the C–H stretching region of 2800 ~ 3100 cm⁻¹ were investigated by polarized photoacoustic Raman spectroscopy and conventional Raman spectroscopy, respectively. Using two deuterated samples, that is, CH₃CDOHCH₃ and CD₃CHOHCD₃, the overlapping spectral features between the CH and CH₃ groups were identified. With the aid of depolarization ratio measurements and density functional theory calculations, a new spectral assignment was presented. In the gas phase, the band at 2884 cm⁻¹ was assigned to the overlapping of one CH₃ Fermi resonance mode and a CH stretching of gauche conformer. The bands at 2917 and 2933 cm⁻¹ were assigned to another two CH₃ Fermi resonance modes, but the latter includes weak contribution from CH stretching of trans conformer. The bands at 2950 and 2983 cm⁻¹ were assigned to CH₃ symmetric and antisymmetric stretching, respectively. The spectral features of liquid 2‐propanol are similar to those in the gas phase except for the blue shift of CH and the red shift of CH₃ band positions, which can be attributed to the intermolecular interaction in the liquid state. The new assignments not only clarify the confusions in previous studies from different spectral methods but also provide the reliable groundwork on spectral application of 2‐propanol in the futures. Copyright © 2014 John Wiley & Sons, Ltd.