Measurement uncertainty from physical sample preparation: estimation including systematic error

A methodology is proposed, which employs duplicated primary sampling and subsequent duplicated physical preparation coupled with duplicated chemical analyses. Sample preparation duplicates should be prepared under conditions that represent normal variability in routine laboratory practice. The proposed methodology requires duplicated chemical analysis on a minimum of two of the sample preparation duplicates. Data produced from the hierarchical design is treated with robust analysis of variance (ANOVA) to generate uncertainty estimates, as standard uncertainties ('u' expressed as standard deviation), for primary sampling (ssamp), physical sample preparation (sprep) and chemical analysis (sanal). The ANOVA results allow the contribution of the sample preparation process to the overall uncertainty to be assessed. This methodology has been applied for the first time to a case study of pesticide residues in retail strawberry samples. Duplicated sample preparation was performed under ambient conditions on two consecutive days. Multi-residue analysis (quantification by GC-MS) was undertaken for a range of incurred pesticide residues including those suspected of being susceptible to loss during sample preparation procedures. Sampling and analytical uncertainties dominated at low analyte concentrations. The sample preparation process contributed up to 20% to the total variability and had a relative uncertainty (Uprep%) of up to 66% (for bupirimate at 95% confidence). Estimates of systematic errors during physical sample preparation were also made using spike recovery experiments. Four options for the estimation of measurement uncertainty are discussed, which both include and exclude systematic error arising from sample preparation and chemical analysis. A holistic approach to the combination and subsequent expression of uncertainty is advised.     

Electron probe microanalysis (EPMA) measurement of thin-film thickness in the nanometre range

The thickness of thin films of platinum and nickel on fused silica and silicon substrates has been determined by EPMA using the commercial software STRATAGEM for calculation of film thickness. Film thickness ranged in the order 10 nm. An attempt was made to estimate the confidence range of the method by comparison with results from other methods of analysis. The data show that in addition to the uncertainty of the spectral intensity measurement and the complicated fitting routine, systematic deviation caused by the underlying model should be added. The scattering in the results from other methods does not enable specification of a range of uncertainty, but deviations from the real thickness are estimated to be less than 20%.     

Orientation Imaging Microscopy for the Transmission Electron Microscope

The resolution limit of Orientation Imaging Microscopy in the Scanning Electron Microscope is between 20 nA and 80 nA depending on the basic resolution/beam current performance of the SEM, the sample atomic number and the level of residual strain within it. The newer technique of orientation imaging in the transmission electron microscope, TEM, improves on this resolution limit by a factor of five to ten. The new technique is based on a novel procedure for determining the crystallography of separate small volumes in the sample by examination of a large series of dark field images. Each image is recorded for a different diffraction condition. This is achieved by using a computer to direct the electron beam onto the same area of the sample so that it covers all directions within a cone of semi-apex angle 3 degrees. Analysis of the intensity of the same point in each of the dark field images permits reconstruction of a diffraction pattern for that point providing the data to calculate its crystal orientation. The process is repeated for each point in the image. The Orientation Image Micrograph is constructed from the orientations so determined. The technique is shown to be capable of producing orientation micrographs of high spatial resolution for unstrained samples. For highly strained samples difficulties are encountered in accurately indexing the complicated diffraction patterns that are observed. Methods to improve the indexing procedures involve determining the sub-cell structure first from a comparison of patterns from adjacent pixels and then summing all patterns belonging to a single sub-cell. The resultant improvement in pattern quality permits more reliable determination of orientation. Examples of this procedure are taken from studies of deformed aluminum.     

Consequences of Strain for the Structure of Aliphatic Molecules

The chemist is accustomed to deriving structures and preferred conformations of organic compounds from rigid molecular models and standard values for bond lengths, bond angles, and torsional profiles. In the case of strained compounds, this rigid structural model has to be abandoned and replaced by a flexible one which takes individual conditions of strain into consideration. It is shown, on the basis of new experimental structure data, that the force field method is suitable and highly reliable for the calculation of structural parameters and preferred conformations of strained compounds. It is, therefore, capable of replacing the rigid molecular model. Furthermore, the systematic analysis of strain induced angle and bond deformation gives a new pivot for the development of a qualitative discussion of deformation in strained molecules and hence for improved conformational analysis. — In the course of this work we were able to isolate two rotamers of D,L -3,4-di(1-adamantyl)-2,2,5,5-tetramethylhexane; this is the first isolation of a rotamer pair of an aliphatic hydrocarbon.     

原子荧光法测定土壤中总汞不确定度的评定

评定了原子荧光法测定土壤中总汞的不确定度.分析了样品从制备到测试的整个过程中各环节对测定结果不确定度的影响,结果表明,影响测定结果相对标准不确定度的最大因素是样品制备过程,其次是重复性条件下的标准偏差,标准物质引入的不确定度最小.在规定条件下,测定结果为(0.146±0.012) mg/kg(k=2).     

Temperature effects,energy shifts,and band entropies of Si semiconductors

Understanding the electronic properties of silicon semiconductors is important for the preparation of high-performance semiconductor materials. We calculated the band entropies, electronic structures, and bonding properties of a silicon semiconductor using density functional theory and the binding-energy and bond-charge model. The relationship between Si energy and temperature was studied using the tight binding (TB) approximation and bond-order-length-strength (BOLS) theory (BOLS-TB), with the Si (111) surface as an example. The specific binding energies and bonding properties of Si atoms in different surface atomic layers are discussed by analyzing the X-ray photoelectron spectra of the Si (111) surface at 953 and 1493 K. This study improves our understanding of how surface properties reflect local bonding states and deepens our understanding of how atomic-relaxation-derived Hamiltonian perturbations and temperature influence the binding energy of the surface region. It also contributes to the development of Si-based semiconductor materials by providing new ideas and methods.     

具有SiC缓冲层的Si衬底上直接沉积碳原子生长石墨烯

石墨烯是近年发现的一种新型多功能材料.在合适的衬底上制备石墨烯成为目前材料制备的一大挑战.本文利用分子束外延(MBE)设备,在Si 衬底上生长高质量的SiC 缓冲层,然后利用直接沉积C原子的方法生长石墨烯,并通过反射式高能电子衍射(RHEED)、拉曼(Raman)光谱和近边X 射线吸收精细结构谱(NEXAFS)等实验技术对不同衬底温度(800、900、1000、1100 °C)生长的薄膜进行结构表征.实验结果表明,在以上衬底温度下都能生长出具有乱层堆垛结构的石墨烯薄膜.当衬底温度升高时,碳原子的活性增强,其成键的能力也增大,从而使形成的石墨烯结晶质量提高.衬底温度为1000 °C时结晶质量最好.其原因可能是当衬底温度较低时,碳原子活性太低不足以形成有序的六方C-sp2环.但过高的衬底温度会使SiC 缓冲层的孔洞缺陷增加,衬底的Si 原子有可能获得足够的能量穿过SiC薄膜的孔洞扩散到衬底表面,与沉积的碳原子反应生成无序的SiC,这一方面会减弱石墨烯的生长,另一方面也会使石墨烯的结晶质量变差.     

Nano Silicon from Nano Silica Using Natural Resource (Rha) for Solar Cell Fabrication

Abstract

High purity (～99%) nano silica with an average particle size of ～100 nm was extracted at pH 3 at 650°C from a natural resource, rice husk, using alkaline extraction followed by acid precipitation method. Using nano silica as a precursor, silicon (Si) nanoparticles have been synthesized by high-temperature magnesiothermic reduction method. The prepared sample was characterized by X-ray diffraction, particle size analyzer, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray fluorescence analyzer, and UV–Vis spectroscopy. The comprehensive characterization studies indicate the pure phase formation of Si and the variation of particle size from 70 nm to 100 nm for samples synthesized at different sintering temperatures. Moreover, the silicon nanoparticles produced at 850°C have pure phase formation, high purity, and good absorption peaks. The efficiency calculated through IV characteristics is found to be increasing in silicon and ruthenium combination (2.67%), which is better than that achieved from the conventional solar cells. The produced silicon nanoparticles could be applied as an anode material for solar cell fabrication.     

Strained cyclophane macrocycles: impact of progressive ring size reduction on synthesis and structure

The synthesis, X-ray crystal structures, and calculated strain energies are reported for a homologous series of 11- to 14-membered drug-like cyclophane macrocycles, representing an unusual region of chemical space that can be difficult to access synthetically. The ratio of macrocycle to dimer, generated via a copper catalyzed azide-alkyne cycloaddition macrocyclization in flow at elevated temperature, could be rationalized in terms of the strain energy in the macrocyclic product. The progressive increase in strain resulting from reduction in macrocycle ring size, or the introduction of additional conformational constraints, results in marked deviations from typical geometries. These strained cyclophane macrocyclic systems provide access to spatial orientations of functionality that would not be readily available in unstrained or acyclic analogs. The most strained system prepared represents the first report of an 11-membered cyclophane containing a 1,4-disubstituted 1,2,3-triazole ring and establishes a limit to the ring strain that can be generated using this macrocycle synthesis methodology.     

Uncertainty limits for certified values of standard reference materials

Summary Uncertainty limits usually employ the 95% confidence limits and should include allowances for the uncertainty of known sources of systematic errors of the measurements. But in many cases, when an interlaboratory comparison study is used for certification purposes of standard reference materials, only the 95% confidence limits are considered and given as the uncertainty limit. In this work, we shall show the results as the number of mean values (n) reported vary and only the 95% confidence limits are considered, using as an example the intercomparison study on IAEA/SL-3/lake sediment sample. And finally, we shall compare the results if only the 95% confidence limits are considered with those of the standard deviation and propose when n is large that the standard deviation should be employed instead of the 95% confidence limits as the uncertainty limits, if the other systematic and random errors are not included.     

Steric Repulsion Induced Conformational Switch in Supramolecular Structures

Inspired by the rigidified architecture of ‘picket-fence’ systems, we propose a strategy utilizing strain to impose intramolecular tension in already peripherally overcrowded structures leading to selective atropisomeric conversion. Employing this approach, tuneable shape-persistent porphyrin conformations were acquired exhibiting distinctive supramolecular nanostructures based on the orientation of the peripheral groups. The intrinsic assemblies driven by non-covalent bonding interactions form supramolecular polymers while encapsulating small molecules in parallel channels or solvent-accessible voids. The developed molecular strain engineering methodologies combined with synthetic approaches have allowed the introduction of the pivalate units creating a highly strained molecular skeleton. Changes in the absorption spectrum indicated the presence of severe steric repulsions between the peripheral groups which were confirmed by single crystal X-ray analysis. To release the steric strain introduced by the peripheral units, thermal equilibration strategies were used to selectively convert the most abundant atropisomer to the desirable minor one.     

Microdetermination of silicon in blood, serum, urine, and milk using furnace atomic absorption spectrometry

A simple, direct microanalytical method for quantitative determination of silicon in human whole blood, serum, urine, and milk by furnace atomic absorption technique has been developed. The method employs standard additions and combines the inherent specificity and simplicity of atomic absorption analysis with the greatly increased sensitivity possible with a heated graphite tube atomizer for the determination of silicon in microliter samples. The sensitivity of the method is 1.3 ng. The method is suitable for the direct analysis of silicon with no sample preparation other than dilution with deionized water, thereby minimizing contamination due to sample preparation. The relative standard deviation for 10 μl of blood (1:1), serum (1:1), urine (1:7), and milk (1:1) was 3.45% or less.     

Oxidation of siliconsilicon and siliconhydrogen bonds with molecular oxygen and bis(trimethylsilyl) peroxide

The siliconsilicon bond which is either strained or substituted with more than two fluorine atoms is easily oxidized with molecular oxygen and bis-(trimethylsilyl) peroxide (BSPO) at or below room temperature to form mainly the corresponding disiloxane. The former aerobic oxidation is inhibited by 2,4,6-tri(t-butyl)phenol, while the latter is not. Oxidation of the SiH bond with BSPO and the preparation of three new (fluoro)methyldisilanes are also described.     

Convectively assembled asymmetric dimer-based colloidal crystals

Monolayer films from polystyrene asymmetric dimer colloidal particles were formed on a silicon substrate using a heat assisted vertical deposition technique. In dilute particle suspensions of systematically varied concentrations, the system maximizes the packing efficiency within a thin meniscus region. Structures with positional order and orientational order in and out of the substrate plane were observed in surface and cross-sectional scanning electron microscopy (SEM) images. The confining effect of the meniscus height drove the formation of the resulting oblique and hexagonal lattices with controlled orientation. The crystals exhibited features similar to the planes of the boron nitride and zinc sulfide atomic structures. The diffraction properties of both colloidal crystal structures were demonstrated via selected area diffraction for laser light in the visible region.     

Experimental shift allowance in the deconvolution of SIMS depth profiles

We study the deconvolution of the secondary ion mass spectrometry (SIMS) depth profiles of silicon and gallium arsenide structures with doped thin layers. Special attention is paid to allowance for the instrumental shift of experimental SIMS depth profiles. This effect is taken into account by using Hofmann's mixing‐roughness‐information depth model to determine the depth resolution function. The ill‐posed inverse problem is solved in the Fourier space using the Tikhonov regularization method. The proposed deconvolution algorithm has been tested on various simulated and real structures. It is shown that the algorithm can improve the SIMS depth profiling relevancy and depth resolution. The implemented shift allowance method avoids significant systematic errors of determination of the near‐surface delta‐doped layer position. Copyright © 2013 John Wiley & Sons, Ltd.     

电感耦合等离子体质谱法测定酱油中铅和总砷含量的不确定度评定

根据实验过程的数学模型,分析了电感耦合等离子体质谱法测定酱油中铅和总砷含量的不确定度来源,对不确定度分量进行计算,并计算出合成不确定度及扩展不确定度。     

金属镁中杂质元素的快速测定

以盐酸溶液(1 1)溶解金属铗样品,用电感耦合等离子体原子发射光谱(ICP—AES)法同时测定金属镁样品中的杂质元素铁、硅、锰、铝、铜和镍。采用标准溶液与样品溶液基体相一致的方法消除基体干扰。对标准样品进行测定,测定结果与标准值基本一致,相对标准偏差小于7％。t检验结果证明,该方法不存在系统误差。     

Strain Release Chemistry of Photogenerated Small-Ring Intermediates

Photochemical processes, such as isomerizations and cycloadditions, have proven to be very useful in the construction of highly strained molecular frameworks. Photoinduced ring strain enables subsequent exergonic reactions which do not require the input of additional chemical energy and provides a variety of attractive synthetic options leading to complex structures. This review covers the progress achieved in the application of sequences combining excitation by ultraviolet light to form strained intermediates, which are further transformed to lower energy products in strain-release reactions. As ring strain is considerable in small ring systems, photogenerated three- and four-membered rings will be covered, mainly focusing on examples from 2000 to May 2020.     

Uncertainty assessment of environmental tritium measurements in water

The method most widely used nowadays to measure environmental tritium levels in water is electrolytic enrichment followed by liquid scintillation spectrometry. Although these techniques have been in use for many years, there is a gap in systematic analysis of the sources of uncertainty associated with this particular application. The paper presents a comprehensive assessment of the individual uncertainty components of the entire analytical process, starting from sample preparation to radioactivity measurement. Examples of the complete uncertainty budget for typical tritium levels in the analysed water samples are included. The relative importance of individual uncertainty components is given and possible ways of improving the overall quality of analyses are discussed.     

π-Relaxation of the ring strain: design of polycyclic unsaturated silicon molecules

Introduction of a double bond into cyclic silanes lowers the ring strain by the cyclic delocalization of π-electrons through the hyperconjugation with the σ bonds, which is favored by the high π-orbital energy of the SiSi bond and the low σ*-orbital energy of the Si-H bonds. The π-relaxation of strains significantly occurs in the small rings. Unsaturated small silicon ring molecules are less strained than the saturated ones and the unsaturated carbon congeners. We calculated a series of polycyclic silicon molecules to confirm the π-relaxation and suggested that some unknown molecules could be prepared due to the low strain.