Utilization of phosphinoamide ligands in homobimetallic fe and mn complexes: the effect of disparate coordination environments on metal-metal interactions and magnetic and redox properties

A series of homobimetallic phosphinoamide-bridged diiron and dimanganese complexes in which the two metals maintain different coordination environments have been synthesized. Systematic variation of the steric and electronic properties of the phosphinoamide phosphorus and nitrogen substituents leads to structurally different complexes. Reaction of [(i)PrNKPPh(2)] (1) with MCl(2) (M = Mn, Fe) affords the phosphinoamide-bridged bimetallic complexes [Mn((i)PrNPPh(2))(3)Mn((i)PrNPPh(2))] (3) and [Fe((i)PrNPPh(2))(3)Fe((i)PrNPPh(2))] (4). Complexes 3 and 4 are iso-structural, with one metal center preferentially binding to the three amide ligands in a trigonal planar arrangement while the second metal center is ligated by three phosphine donors. A fourth phosphinoamide ligand caps the tetrahedral coordination sphere of the phosphine-ligated metal center. M?ssbauer spectroscopy of complex 4 suggests that the metals in these complexes are best described as Fe(II) centers. In contrast, treatment of MnCl(2) or FeI(2) with [MesNKP(i)Pr(2)] (2) leads to the formation of the halide-bridged species [(THF)Mn(μ-Cl)(MesNP(i)Pr(2))(2)Mn(MesNP(i)Pr(2))] (5) and [(THF)Fe(μ-I)(MesNP(i)Pr(2))(2)FeI (7), respectively. Utilization of FeCl(2) in place of FeI(2), however, leads exclusively to the C(3)-symmetric complex [Fe(MesNP(i)Pr(2))(3)FeCl] (6), structurally similar to 4 but with a halide bound to the phosphine-ligated Fe center. The M?ssbauer spectrum of 6 is also consistent with high spin Fe(II) centers. Thus, in the case of the [(i)PrNPPh(2)](-) and [MesNP(i)Pr(2)](-) ligands, zwitterionic complexes with the two metals in disparate coordination environments are preferentially formed. In the case of the more electron-rich ligand [(i)PrNP(i)Pr(2)](-), complexes with a 2:1 mixed donor ligand arrangement, in which one of the ligand arms has reversed orientation relative to the previous examples, are formed exclusively when [(i)PrNLiP(i)Pr(2)] (generated in situ) is treated with MCl(2) (M = Mn, Fe): (THF)(3)LiCl[Mn(N(i)PrP(i)Pr(2))(2)(P(i)Pr(2)N(i)Pr)MnCl] (8) and [Fe(N(i)PrP(i)Pr(2))(2)(P(i)Pr(2)N(i)Pr)FeCl] (9). Bimetallic complexes 3-9 have been structurally characterized using X-ray crystallography, revealing Fe-Fe interatomic distances indicative of metal-metal bonding in complexes 6 and 9 (and perhaps 4, to a lesser extent). All of the complexes appear to adopt high spin electron configurations, and magnetic measurements indicate significant antiferromagnetic interactions in Mn(2) complexes 5 and 8 and no discernible magnetic superexchange in Fe(2) complex 4. The redox behavior of complexes 3-9 has also been investigated using cyclic voltammetry, and theoretical investigations (DFT) were performed to gain insight into the metal-metal interactions in these unique asymmetric complexes.     

Complexes of N-thiophosphorylthioureas (HL) with copper(I). Crystal structures of [Cu3L3] and [Cu(PPh3)2L] chelates

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RC(S)NHP(S)(OiPr)(2) [R = morpholin-N-yl (HL(a)), piperidin-N-yl (HL(b)), NH(2) (HL(c)), PhCH(2)NH (HL(d))] with Cu(PPh(3))(3)I in aqueous EtOH/CH(2)Cl(2) leads to mononuclear [Cu(PPh(3))(2)L-S,S'] complexes. Using copper(i) iodide instead of Cu(PPh(3))(3)I, polynuclear complexes [Cu(n)(L-S,S')(n)] were obtained. The structures of these compounds were investigated by ES-MS, elemental analyses, 1H and 31P NMR in solution, IR and 31P solid-state MAS NMR spectroscopy. The crystal structures of [Cu(3)L(3)(a)] and [Cu(PPh(3))(2)L(b)] were determined by single-crystal X-ray diffraction.     

Transfer of a quadridentate N2S2 ligand from M2+ (M=Cr,Mn, Fe,Co or Ni) to Cu2+: Unexpected reactivities of bimetallic intermediates

A series of complexes of stoichiometry [MX2(dipyS)] {dipyS = bis(2–picolyl)-1,3–dithiopropane); M=Cr, Mn, Fe, Co, Ni, X=Cl; M=Ni or Cu, X=NO3} and [VOCl(dipyS)]Cl have been prepared and characterised, including the X-ray crystal structure of [Ni(ONO2)2(dipyS)]. The kinetics of the transfer of dipyS from these complexes (M=Cr, Mn, Fe, Co or Ni) to Cu2+, to form [Cu(dipyS)]2+, have been studied in MeOH. For M=Ni, the kinetics are consistent with a mechanism involving rate-limiting dissociation of the initial pyridyl—M bond. Subsequent binding of Cu2+ to the pendant pyridyl-residue (or binding Cl– to the vacant site on M) is followed by the complete transfer of dipyS from M to Cu. For M=Cr, Mn or Co, the same mechanism is believed to operate, but in these cases intermediates in the dipyS transfer to Cu2+ have been detected spectroscopically. Evidence is presented that these intermediates have Cu2+ bound to a pendant pyridyl-group on [MCl2(dipyS)] and that the subsequent complete transfer of dipyS involves rate-limiting dissociation of a M—S bond. For M=Fe, e.p.r. spectroscopy shows that the complex is a dimer in solution. However, the transfer reaction with Cu2+ involves an analogous intermediate to that with M=Cr, Mn or Co, but only at high concentrations of Cu2+. Unexpectedly, the binding of Cu2+ inhibits the transfer of dipyS from Fe to Cu. The electronic factors which give rise to this behaviour are discussed.     

Monodentate coordination of N-[di(phenyl/ethyl)carbamothioyl]benzamide ligands: synthesis, crystal structure and catalytic oxidation property of Cu(I) complexes

New four-coordinated tetrahedral copper(I) complexes have been synthesized from the reactions between [CuCl(2)(PPh(3))(2)] and N-(diphenylcarbamothioyl)benzamide (HL1) or N-(diethylcarbamothioyl)benzamide (HL2) in benzene. These complexes have been characterized by elemental analyses, IR, UV/Vis, (1)H, (13)C and (31)P NMR spectroscopy. The molecular structure of both the complexes, [CuCl(HL1)(2)(PPh(3))] (1) and [CuCl(HL2)(PPh(3))(2)] (2) were determined by single-crystal X-ray diffraction, which reveals distorted tetrahedral geometry around each Cu(I) ion. The combination of 2 (0.005 mmol) with hydrogen peroxide (2.5 mmol) in acetonitrile is found to be an active catalyst for the oxidation of primary and secondary alcohols (0.5 mmol) to their corresponding acids and ketones, respectively, at room temperature.     

Synthesis and characterization of homo- and heterodinuclear M(II)-M'(III) (M(II) = Mn or Fe, M'(III) = Fe or Co) mixed-valence supramolecular pseudo-dimers. The effect of hydrogen bonding on spin state selection of M(II)

Reaction of H(3)L(1), the Schiff base condensate of tris(2-aminoethyl)amine with three equivalents of 5-methyl-1H-pyrazole-3-carboxaldehyde, with manganese(II)perchlorate or iron(II)tetrafluoroborate results in the isolation of [MH(3)L(1)]X(2) (M = Mn and X = ClO(4) and M = Fe and X = BF(4)). These complexes are high spin d(5) and d(6), respectively, as inferred from the long M-N bond distances obtained by single crystal X-ray diffraction for both and variable temperature magnetic susceptibility and M?ssbauer spectroscopy for the iron complex. Aerobic treatment of a solution of [CoH(3)L(1)](2+) with three equivalents of potassium hydroxide produced [CoL(1)]. Homonuclear pseudo-dimers were prepared by the aerobic reaction of [FeH(3)L(1)](BF(4))(2) with 1.5 equivalents of potassium hydroxide to give {[FeH(1.5)L(1)](BF(4))}(2) or by the metathesis reaction of [FeH(2)L(1)][FeHL(1)](ClO(4))(2) with sodium hexafluorophosphate to give [FeH(3)L(1)][FeL(1)](PF(6))(2). The complexes were characterized by EA, IR, ESI-MS, variable temperature single crystal x-ray diffraction and M?ssbauer spectroscopy. The iron(III) atom is low spin while the iron(II) atom is spin crossover. Heteronuclear pseudo-dimers were prepared by the 1:1 reaction of [FeH(3)L(1)](BF(4))(2) or [MnH(3)L(1)](ClO(4))(2) with [CoL(1)]. [MH(3)L(1)][CoL(1)](X)(2) (M = Fe and X = BF(4) or M = Mn and X = ClO(4)), were characterized by IR, EA, variable temperature single crystal X-ray diffraction and M?ssbauer spectroscopy in the iron case. The data support a spin crossover and high spin assignment for the iron(II) and manganese(II), respectively. DFT calculations demonstrate that the spin state of the iron(II) atom in {[FeH(3)L(1)][FeL(1)]}(2+) changes from high spin to low spin as the iron(II)-iron(III) distance decreases. This is supported by experimental results and is a result of hydrogen bonding interactions which cause a significant compression of the M(II)-N(pyrazole) bond distances.     

Nine non-symmetric pyrazine-pyridine imide-based complexes: reversible redox and isolation of [M(II/III)(pypzca)2](0/+) when M = Co, Fe

The non-symmetric imide ligand Hpypzca (N-(2-pyrazylcarbonyl)-2-pyridinecarboxamide) has been deliberately synthesised and used to produce nine first row transition metal complexes: [M(II)(pypzca)(2)], M = Zn, Cu, Ni, Co, Fe; [M(III)(pypzca)(2)]Y, M = Co and Y = BF(4), M = Fe and Y = ClO(4); [Cu(II)(pypzca)(H(2)O)(2)]BF(4), [Mn(II)(pypzca)(Cl)(2)]HNEt(3). These are the first deliberately prepared complexes of a non-symmetric imide ligand. X-ray crystal structures of [Cu(II)(pypzca)(2)]·H(2)O, [Co(II)(pypzca)(2)], [Co(III)(pypzca)(2)]BF(4), [Cu(II)(pypzca)(H(2)O)(2)]BF(4)·H(2)O and [Mn(II)(pypzca)Cl(2)]HNEt(3) show that each of the (pypzca)(-) ligands binds in a meridional fashion via the N(3) donors. In the first three complexes, two such ligands are bound such that the 'spare' pyrazine nitrogen atoms are positioned approximately orthogonally to one another and also to the imide oxygen atoms. In MeCN the [M(II/III)(pypzca)(2)](0/+) complexes, where M = Ni, Co or Fe, exhibit one reversible metal based M(II/III) process and two distinct, quasi-reversible ligand based reduction processes, the latter also observed for M(II) = Zn. [Mn(II)(pypzca)Cl(2)]HNEt(3) displays a quasi-reversible oxidation process in MeCN, along with several irreversible processes. Both copper(II) complexes show only irreversible processes. Variable temperature magnetic measurements show that [Fe(III)(pypzca)(2)]ClO(4) undergoes a gradual spin crossover from partially high spin at 298 K (3.00 BM) to fully low spin at 2 K (1.96 BM), and that [Co(II)(pypzca)(2)] remains high spin from 298 to 4 K. All of the complexes are weakly coloured, other than [Fe(II)(pypzca)(2)] which is dark purple and absorbs strongly in the visible region.     

Mono- and dinuclear complexes of chiral tri- and tetradentate Schiff-base ligands derived from 1,1'-binaphthyl-2,2'-diamine

The synthesis and characterization of the bis(bidentate) Schiff-base ligand [(R)-2] formed by the condensation reaction of (R)-1,1'-binaphthyl-2,2'-diamine [(R)-BINAM] with pyridine-2-carboxaldehyde is presented. The coordination chemistry of (R)-2 with Ni(ClO(4))(2).6H(2)O, Co(ClO(4))(2).6H(2)O, CuCl(2), and CuSO(4) has been investigated. Reaction of (R)-2 with the first two metal salts leads to complexes of the type [M((R)-4)(2)](ClO(4))(2) (M = Ni(II), Co(II)), where (R)-4 is a tridentate ligand resulting from the hydrolytic cleavage of one of the pyridyl groups from (R)-2. Both complexes were characterized by X-ray crystallography, which showed that the Lambda absolute configuration of the metal center is favored in both cases. (1)H NMR spectroscopy suggests that the high diastereoselectivity of Lambda-[Co((R)-4)(2)](ClO(4))(2) is maintained in solution. The reaction of (R)-2 with CuCl(2) leads to the dinuclear complex [Cu(2)((R)-2)Cl(4)], which has a [Cu(2)(mu(2)-Cl(2))] core. The reaction of CuSO(4) with (R)-2 gives a dimeric complex, [Cu((R)-4)SO(4)](2), which features a [Cu(2)(mu(2)-(SO(4))(2))] core. This complex can be prepared directly by the reaction of (R)-BINAM with pyridine-2-carboxaldehyde and CuSO(4). The use of rac-BINAM in this synthetic procedure leads to the heterochiral dimer [Cu(2)((R)-4)((S)-4)(SO(4))(2)]; that is, the ligands undergo a self-sorting (self/nonself discrimination) process based on chirality. The reaction of rac-BINAM, pyridine-2-carboxaldehyde, and Co(ClO(4))(2).6H(2)O proceeds via a homochiral self-sorting pathway to produce a racemic mixture of [Co((R)-4)(2)](2+) and [Co((S)-4)(2)](2+). The variable-temperature magnetic susceptibilities of the bimetallic complexes [Cu(2)((R)-2)Cl(4)], [Cu((R)-4)(mu(2)-SO(4))](2), and [Cu(2)((R)-4)((S)-4)(mu(2)-SO(4))(2)] all show weak antiferromagnetic coupling with J = -1.0, -0.40, and -0.67 cm(-)(1), respectively.     

Synthesis and characterization of (smif)2M(n) (n = 0, M = V, Cr, Mn, Fe, Co, Ni, Ru; n = +1, M = Cr, Mn, Co, Rh, Ir; smif =1,3-di-(2-pyridyl)-2-azaallyl)

A series of Werner complexes featuring the tridentate ligand smif, that is, 1,3-di-(2-pyridyl)-2-azaallyl, have been prepared. Syntheses of (smif)(2)M (1-M; M = Cr, Fe) were accomplished via treatment of M(NSiMe(3))(2)(THF)(n) (M = Cr, n = 2; Fe, n = 1) with 2 equiv of (smif)H (1,3-di-(2-pyridyl)-2-azapropene); ortho-methylated ((o)Mesmif)(2)Fe (2-Fe) and ((o)Me(2)smif)(2)Fe (3-Fe) were similarly prepared. Metatheses of MX(2) variants with 2 equiv of Li(smif) or Na(smif) generated 1-M (M = Cr, Mn, Fe, Co, Ni, Zn, Ru). Metathesis of VCl(3)(THF)(3) with 2 Li(smif) with a reducing equiv of Na/Hg present afforded 1-V, while 2 Na(smif) and IrCl(3)(THF)(3) in the presence of NaBPh(4) gave [(smif)(2)Ir]BPh(4) (1(+)-Ir). Electrochemical experiments led to the oxidation of 1-M (M = Cr, Mn, Co) by AgOTf to produce [(smif)(2)M]OTf (1(+)-M), and treatment of Rh(2)(O(2)CCF(3))(4) with 4 equiv Na(smif) and 2 AgOTf gave 1(+)-Rh. Characterizations by NMR, EPR, and UV-vis spectroscopies, SQUID magnetometry, X-ray crystallography, and DFT calculations are presented. Intraligand (IL) transitions derived from promotion of electrons from the unique CNC(nb) (nonbonding) orbitals of the smif backbone to ligand π*-type orbitals are intense (ε ≈ 10,000-60,000 M(-1)cm(-1)), dominate the UV-visible spectra, and give crystals a metallic-looking appearance. High energy K-edge spectroscopy was used to show that the smif in 1-Cr is redox noninnocent, and its electron configuration is best described as (smif(-))(smif(2-))Cr(III); an unusual S = 1 EPR spectrum (X-band) was obtained for 1-Cr.     

Copper(I) complex O(2)-reactivity with a N(3)S thioether ligand: a copper-dioxygen adduct including sulfur ligation, ligand oxygenation, and comparisons with all nitrogen ligand analogues

In order to contribute to an understanding of the effects of thioether sulfur ligation in copper-O(2) reactivity, the tetradentate ligands L(N3S) (2-ethylthio-N,N-bis(pyridin-2-yl)methylethanamine) and L(N3S')(2-ethylthio-N,N-bis(pyridin-2-yl)ethylethanamine) have been synthesized. Corresponding copper(I) complexes, [CuI(L(N3S))]ClO(4) (1-ClO(4)), [CuI(L(N3S))]B(C(6)F(5))(4) (1-B(C(6)F(5))(4)), and [CuI(L(N3S'))]ClO(4) (2), were generated, and their redox properties, CO binding, and O(2)-reactivity were compared to the situation with analogous compounds having all nitrogen donor ligands, [CuI(TMPA)(MeCN)](+) and [Cu(I)(PMAP)](+) (TMPA = tris(2-pyridylmethyl)amine; PMAP = bis[2-(2-pyridyl)ethyl]-(2-pyridyl)methylamine). X-ray structures of 1-B(C(6)F(5))(4), a dimer, and copper(II) complex [Cu(II)(L(N3S))(MeOH)](ClO(4))(2) (3) were obtained; the latter possesses axial thioether coordination. At low temperature in CH(2)Cl(2), acetone, or 2-methyltetrahydrofuran (MeTHF), 1 reacts with O(2) and generates an adduct formulated as an end-on peroxodicopper(II) complex [{Cu(II)(L(N3S))}(2)(mu-1,2-O(2)(2-))](2+) (4)){lambda(max) = 530 (epsilon approximately 9200 M(-1) cm(-1)) and 605 nm (epsilon approximately 11,800 M(-1) cm(-1))}; the number and relative intensity of LMCT UV-vis bands vary from those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {lambda(max) = 524 nm (epsilon = 11,300 M(-1) cm(-1)) and 615 nm (epsilon = 5800 M(-1) cm(-1))} and are ascribed to electronic structure variation due to coordination geometry changes with the L(N3S) ligand. Resonance Raman spectroscopy confirms the end-on peroxo-formulation {nu(O-O) = 817 cm(-1) (16-18O(2) Delta = 46 cm(-1)) and nu(Cu-O) = 545 cm(-1) (16-18O(2) Delta = 26 cm(-1)); these values are lower in energy than those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {nu(Cu-O) = 561 cm(-1) and nu(O-O) = 827 cm(-1)} and can be attributed to less electron density donation from the peroxide pi* orbitals to the Cu(II) ion. Complex 4 is the first copper-dioxygen adduct with thioether ligation; direct evidence comes from EXAFS spectroscopy {Cu K-edge; Cu-S = 2.4 Angstrom}. Following a [Cu(I)(L(N3S))](+)/O(2) reaction and warming, the L(N3S) thioether ligand is oxidized to the sulfoxide in a reaction modeling copper monooxygenase activity. By contrast, 2 is unreactive toward dioxygen probably due to its significantly increased Cu(II)/Cu(I) redox potential, an effect of ligand chelate ring size (in comparison to 1). Discussion of the relevance of the chemistry to copper enzyme O(2)-activation, and situations of biological stress involving methionine oxidation, is provided.     

Tuning the electronic structure of octahedral iron complexes [FeL(X)] (L = 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane,X = Cl,CH(3)O,CN, NO). The S = 1/2 <==>3/2 Spin equilibrium of [FeL(Pr)(NO)

Two new pentadentate, pendent arm macrocyclic ligands of the type 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane where alkyl represents an isopropyl, (L(Pr))(2-), or an ethyl group, (L(Et))(2-), have been synthesized. It is shown that they bind strongly to ferric ions generating six-coordinate species of the type [Fe(L(alk))X]. The ground state of these complexes is governed by the nature of the sixth ligand, X: [Fe(III)(L(Et))Cl] (2) possesses an S = 5/2 ground state as do [Fe(III)(L(Et))(OCH(3))] (3) and [Fe(III)(L(Pr))(OCH(3))] (4). In contrast, the cyano complexes [Fe(III)(L(Et))(CN)] (5) and [Fe(III)(L(Pr))(CN)] (6) are low spin ferric species (S = 1/2). The octahedral [FeNO](7) nitrosyl complex [Fe(L(Pr))(NO)] (7) displays spin equilibrium behavior S = 1/2<==>S = (3)/(2) in the solid state. Complexes [Zn(L(Pr))] (1), 4.CH(3)OH, 5.0.5toluene.CH(2)Cl(2), and 7.2.5CH(2)Cl(2) have been structurally characterized by low-temperature (100 K) X-ray crystallography. All iron complexes have been carefully studied by zero- and applied-field M?ssbauer spectroscopy. In addition, Sellmann's complexes [Fe(pyS(4))(NO)](0/1+) and [Fe(pyS(4))X] (X = PR(3), CO, SR(2)) have been studied by EPR and M?ssbauer spectroscopies and DFT calculations (pyS(4) = 2,6-bis(2-mercaptophenylthiomethyl)pyridine(2-)). It is concluded that the electronic structure of 7 with an S = 1/2 ground state is low spin ferrous (S(Fe) = 0) with a coordinated neutral NO radical (Fe(II)-NO) whereas the S = 3/2 state corresponds to a high spin ferric (S(Fe) = 5/2) antiferromagnetically coupled to an NO(-) anion (S = 1). The S = 1/2<==>S = 3/2 equilibrium is then that of valence tautomers rather than that of a simple high spin<==>low spin crossover.     

Polynuclear and mixed-ligand mononuclear Cu(I) complexes with N-thiophosphorylated thioureas and 1,10-phenanthroline or PPh3

Deprotonation of the N-thiophosphorylated thioureas RC(S)NHP(S)(OiPr)(2) (R = Me(2)N, HL(I); iPrNH, HL(II); 2,6-Me(2)C(6)H(3)NH, HL(III), 2,4,6-Me(3)C(6)H(2)NH, HL(IV), aza-15-crown-5, HL(V)) and reaction with CuI or Cu(NO(3))(2) in aqueous EtOH leads to the polynuclear complexes [Cu(4)(L(I)-S,S')(4)], [Cu(8)(L(II)-S,S')(8)], and [Cu(3)(L(III-V)-S,S')(3)]. The structures of these compounds were investigated by IR, (1)H, (31)P{(1)H} NMR, UV-vis spectroscopy and elemental analyses. The crystal structures of [Cu(4)L(I)(4)], [Cu(8)L(II)(8)], [Cu(3)L(III,IV)(3)] were determined by single-crystal X-ray diffraction. Reaction of the deprotonated ligands (L(I-V))(-) with a mixture of CuI and 1,10-phenanthroline (phen) or PPh(3) leads to the mixed-ligand mononuclear complexes [Cu(phen)L(I-V)], [Cu(PPh(3))L(I-V)] or [Cu(PPh(3))(2)L(I-V)]. The same mixed-ligand complexes were obtained from the reaction of [Cu(4)L(I)(4)], [Cu(8)L(II)(8)], [Cu(3)L(III-V)(3)] with phen or PPh(3).     

Trithiotungsten(VI) complexes having phosphine-thiolate hybrid ligands: synthesis and cluster forming reactions with CuBr, FeCl(2), and [Fe(CH(3)CN)(6)](ClO(4))(2)

Five-coordinated trithiotungsten complexes (PPh(4))[(dmsp)W(S)(3)] (1a) and (PPh(4))[(dpsp)W(S)(3)] (1b) (R(2)PCH(2)CH(2)S(-); R = Me (dmsp-)), Ph (dpsp-))) were synthesized by addition of Hdmsp and Hdpsp to a THF solution of (PPh(4))[(EtS)W(S)(3)]. Treatment of 1a with CuBr in the presence of PPh(3) in CH(3)CN afforded a WCu(2) cluster (dmsp)WS(3)Cu(2)(PPh(3))(2)Br (2). The reaction of 1a with 1 equiv of FeCl(2) went smoothly to generate a 1:1 adduct (PPh(4))[(dmsp)WS(3)(FeCl(2))] (3), while 3 did not react further with excess FeCl(2). On the other hand, 3 was found to react with [Fe(CH(3)CN)(6)](ClO(4))(2), giving rise to an unusual tetranuclear cluster, [(dmsp)WS(3)](2)Fe(2)Cl (4), while the reaction of 1a with 2 equiv of [Fe(CH(3)CN)(6)](ClO(4))(2) led to a cyclic octanuclear cluster [(dmsp)WS(3)Fe](4) (5). Although the oxidation states of W(VI), Cu(I), and Fe(II) are retained in 2 and 3, reduction of the metal ions occurs in the formation of 4 and 5. All the complexes reported in this paper were structurally characterized by X-ray analysis. It is anticipated that the new type of trithiotungsten complexes, 1a and 1b, will serve as potential synthons for various heterometallic sulfide clusters.     

Trinuclear {M1}CN{M2}2 complexes (M1 = Cr(III), Fe(III), Co(III); M2 = Cu(II), Ni(II), Mn(II)). Are single molecule magnets predictable?

The reaction of the hexacyanometalates K3[M(1)(CN)6] (M(1) = Cr(III), Fe(III), Co(III)) with the bispidine complexes [M(2)(L(1))(X)](n+) and [M(2)(L(2))(X)](n+) (M(2) = Mn(II), Ni(II), Cu(II); L(1) = 3-methyl-9-oxo-2,4-di-(2-pyridyl)-7-(2-pyridylmethyl)-3,7-diazabicyclo[3.3.1]nonane-1,5-dicarboxylic acid dimethyl ester; L(2) = 3-methyl-9-oxo-7-(2-pyridylmethyl)-2,4-di-(2-quinolyl)-3,7-diazabicyclo[3.3.1]nonane-1,5-dicarboxylic acid dimethyl ester; X = anion or solvent) in water-methanol mixtures affords trinuclear complexes with cis- or trans-arrangement of the bispidine-capped divalent metal centers around the hexacyanometalate. X-ray structural analyses of five members of this family of complexes (cis-Fe[CuL(2)]2, trans-Fe[CuL(1)]2, cis-Co[CuL(2)]2, trans-Cr[MnL(1)]2, trans-Fe[MnL(1)]2) and the magnetic data of the entire series are reported. The magnetic data of the cyanide bridged, ferromagnetically coupled cis- and trans-Fe[ML]2 compounds (M = Ni(II), Cu(II)) with S = 3/2 (Cu(II)) and S = 5/2 (Ni(II)) ground states are analyzed with an extended Heisenberg Hamiltonian which accounts for anisotropy and zero-field splitting, and the data of the Cu(II) systems, for which structures are available, are thoroughly analyzed in terms of an orbital-dependent Heisenberg Hamiltonian, in which both spin-orbit coupling and low-symmetry ligand fields are taken into account. It is shown that the absence of single-molecule magnetic behavior in all spin clusters reported here is due to a large angular distortion of the [Fe(CN)6](3-) center and the concomitant quenching of orbital angular momentum of the Fe(III) ((2)T2g) ground state.     

Structural basis for unusually long wavelength charge transfer transitions in complexes [MCl(ECH(2)CH(2)NMe(2))(PR(3))] (E = Te,Se; M = Pt,Pd): experimental results and TD-DFT calculations

A series of new complexes, the blue compounds [PdCl(TeCH(2)CH(2)NMe(2))(PR(3))] (PR(3) = PEt(3), PPr(n)(3), PBu(n)(3), PMe(2)Ph, PMePh(2), PPh(3), PTol(3)) and the red [PtCl(TeCH(2)CH(2)NMe(2))(PR(3))] (PR(3) = PMe(2)Ph, PMePh(2)), were synthesized and studied spectroscopically ((1)H and (31)P NMR, UV/vis) and by cyclic voltammetry. The structures of [PdCl(TeCH(2)CH(2)NMe(2))(PPr(n)(3))] (2b) [PdCl(TeCH(2)CH(2)NMe(2))(PMePh(2))] (2e), [PtCl(TeCH(2)CH(2)NMe(2))(PMePh(2))] (2i), and the related [PtCl(SeCH(2)CH(2)NMe(2))(PEt(3))] (3) were determined crystallographically, revealing a typical pattern of trans-positioned neutral N and P donor atoms in an approximately square planar setting. The molecules 2b, 2e, and 2i were calculated by TD-DFT methodology to understand the origin of the weak (epsilon approximately 200 M(-1) cm(-1)) long-wavelength bands at about 600 nm for Pd/Te complexes such as 2b or 2e, at ca. 460 nm for Pt/Te systems such as 2i, and at about 405 nm for Pt/Se analogues such as 3. These transitions are identified as charge transfer transitions from the selenolato or tellurolato centers to unoccupied orbitals involving mainly the phosphine coligands for the Pt(II) compounds and more delocalized MOs for the Pd(II) analogues. Calculations and electrochemical data were used to rationalize the effects of metal and chalcogen variation.     

Anion-dependent formation of helicates versus mesocates of triple-stranded M2L3 (M = Fe2+, Cu2+) complexes

A series of dinuclear triple-stranded complexes, [Fe(2)L(3)?X]X(6) [X = BF(4)(-) (1), ClO(4)(-) (2)], [Fe(2)L(3)?SO(4)](2)(SO(4))(5) (3), [Fe(2)L(3)?Br](BPh(4))(6) (4), Fe(2)L(3)(NO(3))Br(6) (5), and [Cu(2)L(3)?NO(3)](NO(3))(6) (6), which incorporate a central cavity to encapsulate different anions, have been synthesized via the self-assembly of iron(II) or copper(II) salts with the N,N'-bis[5-(2,2'-bipyridyl)methyl]imidazolium bromide (LBr) ligand. X-ray crystallographic studies (for 1-4 and 6) and elemental analyses confirmed the cagelike triple-stranded structure. The anionic guest is bound in the cage and shows remarkable influence on the outcome of the self-assembly process with regard to the configuration at the metal centers. The mesocates (with different configurations at the two metal centers) have formed in the presence of large tetrahedral anions, while helicates (with the same configuration at both metal centers) were obtained when using the relatively smaller spherical or trigonal-planar anions Br(-) or NO(3)(-).     

3d-Metal derivatives of the [Cu(I)(SO3)4]7- ion: structure and magnetism

The Cu(SO(3))(4)(7-) anion, which consists of a tetrahedrally coordinated Cu(I) centre coordinated to four sulfur atoms, is able to act as a multidentate ligand in discrete and infinite supramolecular species. The slow oxidation of an aqueous solution of Na(7)Cu(SO(3))(4) yields a mixed oxidation state, 2D network of composition Na(5){[Cu(II)(H(2)O)][Cu(I)(SO(3))(4)]}·6H(2)O. The addition of Cu(II) and 2,2'-bipyridine to an aqueous Na(7)Cu(SO(3))(4) solution leads to the formation of a pentanuclear complex of composition {[Cu(II)(H(2)O)(bipy)](4)[Cu(I)(SO(3))(4)]}(+); a combination of hydrogen bonding and π-π stacking interactions leads to the generation of infinite parallel channels that are occupied by disordered nitrate anions and water molecules. A pair of Cu(SO(3))(4)(7-) anions each act as a tridentate ligand towards a single Mn(II) centre when Mn(II) ions are combined with an excess of Cu(SO(3))(4)(7-). An anionic pentanuclear complex of composition {[Cu(I)(SO(3))(4)](2)[Fe(III)(H(2)O)](3)(O)} is formed when Fe(II) is added to a Cu(+)/SO(3)(2-) solution. Hydrated ferrous [Fe(H(2)O)(6)(2+)] and sodium ions act as counterions for the complexes and are responsible for the formation of an extensive hydrogen bond network within the crystal. Magnetic susceptibility studies over the temperature range 2-300 K show that weak ferromagnetic coupling occurs within the Cu(II) containing chains of Na(5){[Cu(II)(H(2)O)][Cu(I)(SO(3))(4)]}·6H(2)O, while zero coupling exists in the pentanuclear cluster {[Cu(II)(H(2)O)(bipy)](4)[Cu(I)(SO(3))(4)]}(NO(3))·H(2)O. Weak Mn(II)-O-S-O-Mn(II) antiferromagnetic coupling occurs in Na(H(2)O)(6){[Cu(I)(SO(3))(4)][Mn(II)(H(2)O)(2)](3)}, the latter formed when Mn was in excess during synthesis. The compound, Na(3)(H(2)O)(6)[Fe(II)(H(2)O)(6)](2){[Cu(I)(SO(3))(4)](2)[Fe(III)(H(2)O)](3)(O)}·H(2)O, contained trace magnetic impurities that affected the expected magnetic behaviour.     

Synthesis, structural characterization and luminescent properties of a series of Cu(I) complexes based on polyphosphine ligands

A series of Cu(I) complexes with a [Cu(NN)(PP)](+) moiety, [Cu(phen)(pba)](BF(4)) (1a), [Cu(2)(phen)(2)(pbaa)](BF(4))(2) (2a), [Cu(2)(phen)(2)(pnaa)](BF(4))(2) (3a), [Cu(2)(phen)(2)(pbbaa)](BF(4))(2) (4a), [Cu(dmp)(pba)](BF(4)) (1b), [Cu(2)(dmp)(2)(pbaa)](BF(4))(2) (2b), [Cu(2)(dmp)(2)(pnaa)](BF(4))(2) (3b) and [Cu(2)(dmp)(2)(pbbaa)](BF(4))(2) (4b) (phen = 1,10-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline, pba = N,N-bis((diphenylphosphino)methyl)benzenamine, pbaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)benzene-1,4-diamine, pnaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)naphthalene-1,5-diamine and pbbaa = N,N,N',N'-tetrakis((diphenylphosphino)methyl)biphenyl-4,4'-diamine), were rationally designed and synthesized. These complexes were characterized by (1)H and (31)P NMR, electrospray mass spectrometry, elemental analysis and X-ray crystal structure analysis. Introduction of different central arene spacers (phenyl, naphthyl, biphenyl) into ligands, resulting in the size variation of these complexes, aims to tune the photophysical properties of the complexes. Each Cu(I) ion in these complexes adopts a distorted tetrahedral geometry constructed by the chelating diimine and phosphine groups. Intermolecular C-H···π and/or π···π interactions are involved in the solid states. The dmp-containing complex exhibits better emission relative to the corresponding phen complex due to the steric encumbrance of bulky alkyl groups. Furthermore, for complexes with identical diimine but different phosphine ligands, the tendency of increased emission lifetime as well as blue-shifted emission in the solid state follows with the decrease in size of complexes. Intermolecular C-H···π interactions have an influence on the final solid state photophysical properties through vibrationally relaxed non-radiative energy transfer in the excited state. Smaller-sized complexes show better photophysical properties due to less vibrationally relaxed behavior related to flexible C-H···π bonds. Nevertheless, the tendency for increased quantum yield and emission lifetime, as well as blue-shifted emission in dilute solution goes with the increase in size of complexes. The central arene ring (phenyl, naphthyl or biphenyl) has an influence on the final photophysical properties. The larger the π-conjugated extension of central arene ring is, the better the photophysical properties of complex are. The rigid and large-sized complex 3b, with a high quantum yield and long lifetime, is the best luminophore among these complexes.     

Periodic trends within a series of five-coordinate thiolate-ligated [MII(SMe2N4(tren))]+ (M = Mn, Fe, Co, Ni, Cu, Zn) complexes, including a rare example of a stable CuII-thiolate

A series of five-coordinate thiolate-ligated complexes [M(II)(tren)N4S(Me2)]+ (M = Mn, Fe, Co, Ni, Cu, Zn; tren = tris(2-aminoethyl)amine) are reported, and their structural, electronic, and magnetic properties are compared. Isolation of dimeric [Ni(II)(SN4(tren)-RS(dang))]2 ("dang"= dangling, uncoordinated thiolate supported by H bonds), using the less bulky [(tren)N4S](1-) ligand, pointed to the need for gem-dimethyls adjacent to the sulfur to sterically prevent dimerization. All of the gem-dimethyl derivatized complexes are monomeric and, with the exception of [Ni(II)(S(Me2)N4(tren)]+, are isostructural and adopt a tetragonally distorted trigonal bipyramidal geometry favored by ligand constraints. The nickel complex uniquely adopts an approximately ideal square pyramidal geometry and resembles the active site of Ni-superoxide dismutase (Ni-SOD). Even in coordinating solvents such as MeCN, only five-coordinate structures are observed. The MII-S thiolate bonds systematically decrease in length across the series (Mn-S > Fe-S > Co-S > Ni-S approximately Cu-S < Zn-S) with exceptions occurring upon the occupation of sigma* orbitals. The copper complex, [Cu(II)(S(Me2)N4(tren)]+, represents a rare example of a stable CuII-thiolate, and models the perturbed "green" copper site of nitrite reductase. In contrast to the intensely colored, low-spin Fe(III)-thiolates, the M(II)-thiolates described herein are colorless to moderately colored and high-spin (in cases where more than one spin-state is possible), reflecting the poorer energy match between the metal d- and sulfur orbitals upon reduction of the metal ion. As the d-orbitals drop in energy proceeding across the across the series M(2+) (M= Mn, Fe, Co, Ni, Cu), the sulfur-to-metal charge-transfer transition moves into the visible region, and the redox potentials cathodically shift. The reduced M(+1) oxidation state is only accessible with copper, and the more oxidized M(+4) oxidation state is only accessible for manganese.     

o-Iminobenzosemiquinonato complexes of Mn(III) and Mn(IV). Synthesis and characterization of [Mn(III)(L(ISQ))(2)(L(AP))] (S(t) = 1) and [Mn(IV)(L(ISQ))(2)(L(AP)-H)] (S(t) = 1/2)

From the reaction of [Mn(III)(3)(micro-O)(micro-CH(3)CO(2))(6)]CH(3)CO(2) (manganese(III) acetate) and 2-anilino-4,6-di-tert-butylphenol (1:3) in methanol under anaerobic conditions, dark brown-black crystals of [Mn(III)(L(ISQ))(2)(L(AP))] (1) were obtained in approximately 30% yield. (L(AP))(-) represents the closed-shell o-aminophenolate(-) form of the above ligand, and (L(ISQ))(-) is the monoanionic pi radical form o-iminobenzosemiquinonate(-) (S(rad) = 1/2). Complex 1 can be deprotonated at the (L(AP))(-) ligand and one-electron-oxidized by air, yielding crystals of [Mn(IV)(L(ISQ))(2)(L(AP)-H)] (2), where (L(AP)-H)(2-) represents the closed-shell, dianionic o-amidophenolate(2-) form of the above ligand. The structures of 1 and 2 have been determined by X-ray crystallography at 100 K. The protonation and oxidation levels of the ligands and of the metal ions have been unequivocally established: both complexes contain two pi radical ligands, 1 contains a Mn(III) ion, and 2 contains a Mn(IV) ion. The spins of the radicals (S(rad) = 1/2) couple strongly antiferromagnetically with the d(4) and d(3) configuration of the Mn ions in 1 and 2, respectively, yielding the observed ground states of S = 1 for 1 and S = (1)/(2) for 2. This has been established by temperature-dependent susceptibility measurements (2-300 K) and S- and X-band EPR spectroscopy.     

Acetylide-bridged organometallic oligomers via the photochemical metathesis of methyl-iron(II) complexes

The acetylido methyl iron(II) complexes, cis/trans-[Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1) and trans-[Fe(depe)(2)(C[triple bond]CR)(CH(3))] (2) (dmpe = 1,2-dimethylphoshinoethane; depe = 1,2-diethylphosphinoethane), were synthesized by transmetalation from the corresponding alkyl halide complexes. Acetylido methyl iron(II) complexes were also formed by transmetalation from the chloride complexes, trans-[Fe(dmpe)(2)(C[triple bond]CR)(Cl)] or trans-[Fe(depe)(2)(C[triple bond]CR)(Cl)]. The structure of trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(CH(3))] (1a) was determined by single-crystal X-ray diffraction. The methyl acetylido iron complexes, [Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1), are thermally stable in the presence of acetylenes; however, under UV irradiation, methane is lost with the formation of a metal bisacetylide. Photochemical metathesis of cis- or trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CR)] (R = C(6)H(5) (1a), 4-C(6)H(4)OCH(3) (1b)) with terminal acetylenes was used to selectively synthesize unsymmetrically substituted iron(II) bisacetylide complexes of the type trans-[Fe(dmpe)(2)(C[triple bond]CR)(C[triple bond]CR')] [R = Ph, R' = Ph (6a), 4-CH(3)OC(6)H(4) (6b), (t)()Bu (6c), Si(CH(3))(3) (6d), (CH(2))(4)C[triple bond]CH (6e); R = 4-CH(3)OC(6)H(4), R' = 4-CH(3)OC(6)H(4), (6g), (t)()Bu (6h), (CH(2))(4)C[triple bond]CH (6i), adamantyl (6j)]. The structure of the unsymmetrical iron(II) bisacetylide complex trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(C[triple bond]CC(6)H(4)OCH(3))] (6b) was determined by single-crystal X-ray diffraction. The photochemical metathesis of the bis-acetylene, 1,7-octadiyne, with trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CPh)] (1a), was utilized to synthesize the bridged binuclear species trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (11). The trinuclear species trans,trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (12) was synthesized by the photochemical reaction of Fe(dmpe)(2)(C[triple bond]CPh)(C[triple bond]C(CH(2))(4)C[triple bond]CH) (6e) with Fe(dmpe)(2)(CH(3))(2). Extended irradiation of the bisacetylide complexes with phenylacetylene resulted in insertion of the terminal alkyne into one of the metal acetylide bonds to give acetylide butenyne complexes. The structure of the acetylide butenyne complex, trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(4)OCH(3))(eta(1)-C(C(6)H(5))=CH(C[triple bond]CC(6)H(4)OCH(3)))] (9a) was determined by single-crystal X-ray diffraction.