Palladium-Catalyzed Arylation of Endocyclic 1-Azaallyl Anions: Concise Synthesis of Unprotected Enantioenriched cis-2,3-Diarylpiperidines

Unprotected cis-2,3-diarylpiperidines are synthesized through an unprecedented palladium-catalyzed cross-coupling reaction between aryl halides and elusive endocyclic 1-azaallyl anions. These intermediates are generated in situ by the deprotonation of 2-aryl-1-piperideines, precursors that are readily prepared in two operations from simple piperidines. An asymmetric version of this reaction with (2R, 3R)-iPr-BI-DIME as the ligand provides products in moderate to good yields and enantioselectivities. This study significantly expands the synthetic utility of endocyclic 1-azaallyl anions.     

Synthesis of an elusive,stable 2-azaallyl radical guided by electrochemical and reactivity studies of 2-azaallyl anions

The super electron donor (SED) ability of 2-azaallyl anions has recently been discovered and applied to diverse reactivity, including transition metal-free cross-coupling and dehydrogenative cross-coupling processes. Surprisingly, the redox properties of 2-azaallyl anions and radicals have been rarely studied. Understanding the chemistry of elusive species is the key to further development. Electrochemical analysis of phenyl substituted 2-azaallyl anions revealed an oxidation wave at E_1/2 or E_pa = −1.6 V versus Fc/Fc⁺, which is ∼800 mV less than the reduction potential predicted (E_pa = −2.4 V vs. Fc/Fc⁺) based on reactivity studies. Investigation of the kinetics of electron transfer revealed reorganization energies an order of magnitude lower than commonly employed SEDs. The electrochemical study enabled the synthetic design of the first stable, acyclic 2-azaallyl radical. These results indicate that the reorganization energy should be an important design consideration for the development of more potent organic reductants.

The super electron donor (SED) capabilities of 2-azaallyl anions has recently been discovered and applied to diverse reactivity; their structures and electron transfer characteristics are reported herein.     

Preparation of 2-azaallyl anions and imines from N-chloroamines and their cycloaddition and allylation

Exposure of N-chloroamines to KO^tBu or LDA, in the presence of PMDETA or HMPA, provides 2-azaallyl anions capable of π4s + π2s cycloaddition reactions with a range of olefins. Good yields were achieved with stabilised systems, however, they were more modest when accessing semi-stabilised 2-azaallyl anions. By modifying the reaction conditions, one-pot dehydrochlorination/allylation can also be achieved with a range of N-chloroamines.     

Nickel-catalyzed enantioselective vinylation of aryl 2-azaallyl anions

A unique enantioselective nickel-catalyzed vinylation of 2-azaallyl anions is advanced for the first time. This method affords diverse vinyl aryl methyl amines with high enantioselectivities, which are frequently occurring scaffolds in natural products and medications. This C–H functionalization method can also be extended to the synthesis of enantioenriched 1,3-diamine derivatives by employing suitably elaborated vinyl bromides. Key to the success of this process is the identification of a Ni/chiraphos catalyst system and a less reducing 2-azaallyl anion, all of which favor an anionic vinylation route over a background radical reaction. A telescoped gram scale synthesis and a product derivatization study confirmed the scalability and synthetic potential of this method.

A unique enantioselective Ni-catalyzed vinylation of 2-azaallyl anions is advanced. This method affords vinyl aryl methyl amine or 1,3-diamine derivatives with high enantioselectivities, which are frequently occurring scaffolds in medications.     

Synthesis and enantioselective recognition of an (S)-BINOL-based colorimetric chemosensor for mandelate anions

New chiral receptors 1 and 2 based on (S)-BINOL and thiourea units were synthesized. The chiral recognition of receptors for chiral anions were studied by fluorescence, UV–vis, and ¹H NMR spectra. The results of the non-linear curve fitting indicated that the receptors and guest anions formed a 1:1 stoichiometric complex. The obvious color change of receptor 2 can be observed by the naked eye when the enantiomers of mandelate anions were added, which demonstrates that receptor 2 may be used as a colorimetric sensor for mandelate anions.     

A new perylene diimide-based fluorescent chemosensor for selective detection of ATP in aqueous solution

A new perylene diimide (PDI) ligand (1) functionalized with a Zn²⁺–dipicolylethylenediamine (Zn²⁺–DPEN) moiety was synthesized and first used as a fluorometric chemosensor to specifically detect the presence of ATP over other phosphate anions in aqueous solution. The solution of 1 upon addition of ATP displayed a remarkable absorption decrease compared with other anions, indicating the selectivity of 1 to ATP. Moreover, among these anions investigated, only ATP showed a considerable enhancement of fluorescent intensity of 1. The fluorescence molar ratio plot combined with the ESI-TOF mass measurement determined that binding stoichiometry between 1 and ATP is 1:1.     

Anion receptors with viologen molecular scaffold

We have designed and synthesized new anion receptors 1²⁺ and 2²⁺. These receptors interact with anions through hydrogen bonds and charge transfer complex depending on the basicity of anion. Therefore, anions with weak basicity such as chloride, bromide, and hydrogen sulfate bound to the receptors 1²⁺ and 2²⁺ only through hydrogen bonds while anions with strong basicity such as fluoride, acetate and dihydrogen phosphate bound to the receptors 1²⁺ and 2²⁺ only through charge transfer interactions at UV–vis titration condition (20 μM). However, in more concentrated ¹H NMR titration condition (2 mM), 1²⁺ and 2²⁺ decomposed to form the product one of their amide arm is eliminated. As charge transfer complexes showed colorimetric response, they turned out to be efficient naked eye detector for anions with strong basicity such as fluoride, acetate, and dihydrogen phosphate.     

ESR study on the reactions of iron carbonyls with nitro and nitrosoparaffines. A mechanism of the reductive carbonylation of nitro compounds

The interaction of Fe_n(CO)_m, (n and m equal 1 and 5, 2 and 9, 3 and 12, respectively) with 2-methyl-2-nitrosopropane and sodium salts of nitromethane and nitrocyclohexane was studied. The initial stages of the process, following the activating complex-formation, involves redox disproportionation to give rise to the radical Fe(I) carbonyl complexes and radical anions Fe₂(CO)₈⁻_. (I) Fe₃(CO)₁₁⁻_. (II), Fe₄(CO)₁₃⁻_. (III) and Fe₃(CO)₁₂⁻_. (IV). Also, radical anions I–IV are formed in the interaction of salts of carbonyl ferrate anions Na₂Fe(CO)₄·1.5 diox and PPN₂[Fe_n(CO)_m−1] (where PPN = (PPh₃)₂N⁺), with nitro- and nitroso-tert-butane.Radical anions I–III act as catalytically active species in the coordination sphere of which the nitro compounds undergo a successive deoxygenation to nitrene radical complexes with their subsequent carbonylation to isocyanates. A scheme of the reductive carbonylation is proposed.     

The synthesis and anions complexation property of novel biscalixarene: dumbbell shaped biscalix[4]-1,3-aza-crown

By reacting calix[4]-1,3-aza-crown 2 with 1,6-diisocyanatohexane in “1+2” condensation mode, the first example dumbbell shaped biscalix[4]-1,3-aza-crown 3 was conveniently prepared in yield of 94%. The complexation properties of compound 3 were investigated by UV–vis spectra and ¹H NMR experiments. The results showed that compound 3 has good complexation abilities for anions. Compound 3 binded monoacidic anions with 1:2 binding-stoichiometry and binded binary acidic anions with 1:1 binding-stoichiometry.     

Briarenolide E: the first 2-ketobriarane diterpenoid from an octocoral Briareum sp. (Briareidae)

A novel 2-ketobriarane diterpenoid, briarenolide E (1), was isolated from an octocoral Briareum sp. The structure of briarane 1 was elucidated by interpretations of spectral data. Compound 1 displayed modestly inhibitory effects on the generation of superoxide anions and the release of elastase by human neutrophils.     

Synthesis of the anionic fluororeceptors based on thiourea and amide groups and recognition property for α,ω-dicarboxylate

Three new neutral receptors (1, 2 and 3) containing thiourea and amide groups were synthesized by simple steps in good yields. The binding properties for anions of 1, 2 and 3 were examined by UV-vis, fluorescence, and ¹H NMR spectroscopy. Receptors 1, 2 and 3 all had a better adipate anion selectivity by comparison with other dicarboxylate anions. The association constants of 1, 2 and 3 with adipate were higher as compared to other anions (malonate, succinate, glutarate). In particular, a distinct color change was observed from light yellow to orange-red upon addition of adipate to the solution of 1 in DMSO. The UV-vis and fluorescence data indicate that a 1:1 stoichiometry complex is formed between compound 1, 2 or 3 and dicarboxylate anions through hydrogen bonding interactions.     

Novel chiral fluorescent macrocyclic receptors: synthesis and recognition for amino acid anions

New chiral fluorescence macrocycles 1 and 2 containing naphthalene and amino acid units were synthesized. The binding properties for amino acid anions were examined by the fluorescence and ¹H NMR spectra. The results indicated good enantioselectivity of 1 toward the N-protected phenylalanine anions.     

Adenine-based urea receptors in fluorescent recognition of iodide

Adenine-based receptors 1 and 2 are designed and synthesized for selective sensing of iodide over the other halides and carboxylate anions. Both the receptors 1 and 2 use the urea motif for binding carboxylates and halides. Emissions of the naphthalene and the anthracene in 1 and 2, respectively, are monitored in CHCl₃ in detecting the anions. While carboxylates, fluoride, chloride, and bromide increase the emissions of naphthalene and anthracene in both the receptors 1 and 2 during complexation, iodide quenches the emission. Such selective quenching allows iodide to be discriminated from other halides and carboxylate anions.     

Promoting effects of the hydroxymethyl group on the fluorescent signaling recognition of anions by thioureas

A series of novel fluorescent naphthylthioureas 1-4 with hydroxymethyl groups was designed and synthesized. Upon complexation with anions, 1-4 showed strong fluorescence enhancements in the order: 1>2>3≈4, which is consistent with the number of hydroxymethyl groups contained in their structures. Hydroxymethyl groups have an important influence on the compounds’ trans-trans or trans-cis conformations, and their action to promote the fluorescence signaling recognition of the thioureas for anions might be caused by their preorganizing the intramolecular protons of the receptor in favor of sites of the trans-trans conformation ready for hydrogen bond formation with the anions. Thioureas 1 to 4 had favorable selectivities for certain anions, which relied on the net charge and Brφnsted basicity of the anions.     

Preparation of a metal–ligand fluorescent chemosensor and enantioselective recognition of carboxylate anions in aqueous solution

Two chiral fluorescent chemosensors 1 and 2 were synthesized, and the structure characterized by IR, ¹H NMR, ¹³C NMR, MS spectra and elemental analysis. Their recognition ability was studied in aqueous solution (Tris–HCl buffer pH 7.4, MeOH/H₂O = 1:1) through fluorescence spectra. Receptors 1 and 2 showed a good binding ability to the copper ion. The host 1-Cu²⁺ complex showed a chiral recognition ability to mandelate anions with a preferable binding to l-mandelate than d-mandelate anions. The host 1-Cu²⁺ complex and l- or d-mandelate anions formed 1:1 stoichiometric complex. The binding constant for l-mandelate is 576 M⁻¹, whereas that for d-mandelate is only 38 M⁻¹, which can be distinguished by the different change of fluorescence intensity.     

Hybrid compounds of Keggin polyoxotungstate with transition metal ion as the central atom. Synthesis,structure and properties

The compounds (Hbipy)₂[Co(bipy)₂(H₂O)₄]₂(CoW₁₂O₄₀)·2bipy·7H₂O (1) and [Ni₂(Hbipy)₂(bipy)(H₂O)₄(H₂W₁₂O₄₀)]·5H₂O (2) (bipy = 4,4-bipyridine) were synthesized hydrothermally and characterized by elemental analysis, IR spectroscopy, TG analyses, solid ultraviolet diffuse spectroscopy and single crystal X-ray diffraction method. In 1 the complex ions, [Co(bipy)₂(H₂O)₄]²⁺, construct a supramolecular layer through π-π stacking interaction. The heteropolyanions with central Co atom and supramolecular layers are linked by hydrogen bonds. In 2 a 2D structure is formed from metatungstate anions and binuclear Ni-bipy complexes through the coordination of metatungstate anions and bipy to Ni ions. Between the layers and bipyridine molecules are the hydrogen bond interactions. The formation of 1 and 2 shows that the solution acidity and metal ions influence greatly the structure of the compounds. Solid ultraviolet diffusion results indicate that the compounds 1 and 2 are potential semiconductor materials. In 1 and 2 there exists a weak antiferromagnetic interaction.     

The anion recognition properties of Schiff base or its reductive system based on 2,2′-bipyridine derivatives

Two novel artificial receptors, 2,2′-bipyridine derivatives containing phenol group, have been designed and synthesized. The interaction of the receptors containing Schiff base or its reductive system with biologically important anions was determined by UV–vis and ¹H NMR titration experiments. Results indicate that receptors 1 and 2 show the strong binding ability for dihydrogen phosphate (H₂PO₄⁻), fluoride (F⁻), acetate (AcO⁻) and almost no binding ability for chloride (Cl⁻), bromide (Br⁻), iodide (I⁻). At the same time, the strongest binding ability of receptor 1 for H₂PO₄⁻ among studied anions is not influenced by the existence of other anions; as well as receptor 2 for F⁻. In addition, the binding ability of receptor 1 (Schiff base system) with various anions is stronger than that of receptor 2 (the reductive Schiff base system) due to the difference of electronic effect.     

Effective receptors for fluoride and acetate ions: synthesis and binding study of pyrrole- and cystine-based cyclopeptido-mimetics

Two conformationally constrained pseudo-cyclopeptides (1, 2) consisting of pyrrole-, pyridine-, and cystine-moieties were designed and synthesized as neutral receptors for anionic guests. The anion recognition abilities of these two receptors were examined photometrically in acetonitrile solution. The UV-vis study revealed that the [1+1] receptor (1) formed 1:1 complexes with anions, whereas the [2+2] receptor (2) led to 1:2 mode binding with anions. Both receptors displayed good affinity and selectivity for fluoride and acetate ions.     

Synthesis of colorimetric receptors for dicarboxylate anions: a unique color change for malonate

Three new chromogenic receptors (1, 2, and 3) containing p-nitrophenyl or p-nitronaphthyl or methyl groups appended to the thiourea groups were synthesized and characterized. Upon addition of a series of dicarboxylate anions to receptor 1 in DMSO, only the appearance of the solution of receptor 1 with malonate showed a color change from blue to yellow which can be detected by the naked eye at parts per million. With the addition of the series of dicarboxylate anions to receptor 2, the solutions showed an indistinct intense dark-red color. Whereas the addition of the same dicarboxylate anions to receptor 3, the solutions did not induce any color change. Thus, for the unique color change, the receptor 1 can act as an optical chemosensor for the malonate anion even in the presence of other dicarboxylate anions.     

Synthesis and characterization of chalcogen (S and Se) derivatives of 4-chloro- and 4-methoxy-N,N-diisopropylpyridine-2-carboxamide: X-ray structure of 4-methoxy-3-(sulfanylmethyl)- and 4-chloro-3-(selenenylbenzyl)-N,N-diisopropylpyridine-2-carboxamide

Synthesis of chalcogen (S and Se) derivatives of 4-chloro- and 4-methoxy-N,N-diisopropylpyridine-2-carboxamide (1a and 1b respectively) has been reported. 1a and 1b were lithiated with 2 equiv. of n-BuLi or LDA at ?78 °C. Addition of elemental sulfur or selenium to the carbanion led to the formation of corresponding thiolate or selenolate anions respectively. The selenolate anions were aerial oxidized to afford the corresponding diselenides. The thiolate/selenolate anions were quenched with a variety of electrophiles to give unsymmetrical thio/selenoalkanes in moderate to good yields. Reductive cleavage of Se–Se bond has also been studied. The synthesized compounds were characterized by elemental analysis, NMR (¹H, ¹³C and ⁷⁷Se), FT-IR and mass spectral techniques. Crystal structures of two compounds, 6b and 7a, were determined by single crystal X-ray crystallography. Their crystal structure exhibits 1,4-type S?OCH₃ and Se?Cl intramolecular secondary interactions respectively. The relative thermal stability of 3a, 3b and 4a has also been established by thermogravimetric analysis.