Product ion scanning using a Q-q-Q linear ion trap (Q TRAP) mass spectrometer

The use of a Q-q-Q(linear ion trap) instrument to obtain product ion spectra is described. The instrument is based on the ion path of a triple quadrupole mass spectrometer with Q3 operable as either a conventional RF/DC quadrupole mass filter or a linear ion trap mass spectrometer with axial ion ejection. This unique ion optical arrangement allows de-coupling of precursor ion isolation and fragmentation from the ion trap itself. The result is a high sensitivity tandem mass spectrometer with triple quadrupole fragmentation patterns and no inherent low mass cut-off. The use of the entrance RF-only section of the instrument as accumulation ion trap while the linear ion trap mass spectrometer is scanning enhances duty cycles and results in increased sensitivities by as much as a factor of 20. The instrument is also capable of all of the triple quadrupole scans including multiple-reaction monitoring (MRM) as well as precursor and constant neutral loss scanning. The high product ion scanning sensitivity allows the recording of useful product ion spectra near the MRM limit of quantitation.     

Electron capture and transfer dissociation: Peptide structure analysis at different ion internal energy levels

We decoupled electron-transfer dissociation (ETD) and collision-induced dissociation of charge-reduced species (CRCID) events to probe the lifetimes of intermediate radical species in ETD-based ion trap tandem mass spectrometry of peptides. Short-lived intermediates formed upon electron transfer require less energy for product ion formation and appear in regular ETD mass spectra, whereas long-lived intermediates require additional vibrational energy and yield product ions as a function of CRCID amplitude. The observed dependencies complement the results obtained by double-resonance electron-capture dissociation (ECD) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and ECD in a cryogenic ICR trap. Compared with ECD FT-ICR MS, ion trap MS offers lower precursor ion internal energy conditions, leading to more abundant charge-reduced radical intermediates and larger variation of product ion abundance as a function of vibrational post-activation amplitude. In many cases decoupled CRCID after ETD exhibits abundant radical c-type and even-electron z-type ions, in striking contrast to predominantly even-electron c-type and radical z-type ions in ECD FT-ICR MS and especially activated ion-ECD, thus providing a new insight into the fundamentals of ECD/ETD.     

On the detailed mechanisms of collision-induced dissociation experiments performed by electrospray ion trap

The product ion spectra obtained by electrospray ionization (ESI) ion trap instruments exhibit a higher number of fragment ions than those achieved by other ion-trap-based systems, indicating the presence of more effective energy deposition mechanisms. This behavior can be attributed to several different reasons, among which different initial internal energy of the precursor ions, pre-activation due to collisions taking place outside the trap, different target gas mixtures inside the trap, and different ion trap geometry were considered. Data obtained from experiments using a triple quadrupole instrument, CI-ion trap, and ESI-ion trap have been compared. The results so achieved seem to indicate that the presence inside the trap of neutral molecules of the solvent employed for the ESI process have a relevant role, promoting high energy deposition in the colliding ions.     

Ion activation methods for tandem mass spectrometry

This tutorial presents the most common ion activation techniques employed in tandem mass spectrometry. In-source fragmentation and metastable ion decompositions, as well as the general theory of unimolecular dissociations of ions, are initially discussed. This is followed by tandem mass spectrometry, which implies that the activation of ions is distinct from the ionization step, and that the precursor and product ions are both characterized independently by their mass/charge ratios. In collision-induced dissociation (CID), activation of the selected ions occurs by collision(s) with neutral gas molecules in a collision cell. This experiment can be done at high (keV) collision energies, using tandem sector and time-of-flight instruments, or at low (eV range) energies, in tandem quadrupole and ion trapping instruments. It can be performed using either single or multiple collisions with a selected gas and each of these factors influences the distribution of internal energy that the activated ion will possess. While CID remains the most common ion activation technique employed in analytical laboratories today, several new methods have become increasingly useful for specific applications. More recent techniques are examined and their differences, advantages and disadvantages are described in comparison with CID. Collisional activation upon impact of precursor ions on solid surfaces, surface-induced dissociation (SID), is gaining importance as an alternative to gas targets and has been implemented in several different types of mass spectrometers. Furthermore, unique fragmentation mechanisms of multiply-charged species can be studied by electron-capture dissociation (ECD). The ECD technique has been recognized as an efficient means to study non-covalent interactions and to gain sequence information in proteomics applications. Trapping instruments, such as quadrupole ion traps and Fourier transform ion cyclotron resonance instruments, are particularly useful for the photoactivation of ions, specifically for fragmentation of precursor ions by infrared multiphoton dissociation (IRMPD). IRMPD is a non-selective activation method and usually yields rich fragmentation spectra. Lastly, blackbody infrared radiative dissociation is presented with a focus on determining activation energies and other important parameters for the characterization of fragmentation pathways. The individual methods are presented so as to facilitate the understanding of each mechanism of activation and their particular advantages and representative applications.     

Ultraviolet photodissociation of protonated pharmaceuticals in a pressurized linear quadrupole ion trap

Ultraviolet photodissociation (UVPD) was evaluated as a technique for generating ion fragmentation information that is alternative and/or complementary to the information obtained by collision‐induced dissociation (CID). Ions trapped in a pressurized linear ion trap were dissociated using a 355 nm or a 266 nm pulsed laser. Comparisons of UVPD and CID spectra using a set of aromatic chromophore‐containing compounds (desmethyl bosentan, haloperidol, nelfinavir) demonstrated distinct characteristic fragmentation patterns resulting from photodissociation. The wavelength of light and the pressure of the buffer gas in the UVPD cell are important parameters that control fragmentation pathways. The wavelength effect is related to the absorption cross section, location of the chromophore and the energy carried by one photon. Thus, UV irradiation wavelength affects fragmentation pathways as well as the fragmentation rate. The pressure effect can be explained by collisional quenching of ‘slow’ fragmentation pathways. We observed that higher pressure of the buffer gas during UVPD experiments highlights unique fragment ions by suppressing slow fragmentation pathways responsible for CID‐like fragmentation patterns. Copyright © 2010 John Wiley & Sons, Ltd.     

Effects of heavy gases on the tandem mass spectra of peptide ions in the quadrupole ion trap

Heavy gases (xenon, argon, krypton, methane) have been used to improve the performance of the quadrupole ion trap when performing collision-induced dissociation on peptides. MS/MS spectra reveal that increased amounts of internal energy can be deposited into peptide ions and more structural information can be obtained. Specifically, the pulsed introduction of the heavy gases (as reported previously by Doroshenko, V. M.; Cotter, R. J.Anal. Chem. 1996, 68, 463) provides greater energy deposition without the deleterious effects that static pressures of heavy gas have on spectra. Internal energy deposition as indicated by a qualitative evaluation of MS/MS spectra shows pulsed introduction of heavy gases enables ions to obtain more internal energy than possible by using static pressures of the same heavy gases. A linear correlation is observed between the percentage of heavy gas added and the ratio of product ions used to reflect internal energy deposition. Results here also show that upon pulsed introduction of heavy gases, empirical optimization of a single frequency resonant excitation signal is no longer needed to obtain good MS/MS spectrometry efficiency. The presence of many low mass-to-charge ratio ions and the absence of side chain cleavages in the MS/MS spectra of peptides suggests that the propensity for consecutive fragmentations is increased with the pulsed introduction of heavy gases. In addition, by varying the delay time between introduction of the gas and application of the resonant excitation signal, the amount of fragmentation observed in MS/MS spectra can be changed.     

Collisional activation of ions in RF ion traps and ion guides: The effective ion temperature treatment

Ion transfer and storage using inhomogeneous radio frequency (RF) electric fields in combination with gas-assisted ion cooling and focusing constitutes one of the basic techniques in mass spectrometry today. The RF motion of ions in the bath gas environment involves a large number of ion-neutral collisions that leads to the internal activation of ions and their effective "heating" (when a thermal distribution of internal energies results). The degree of ion activation required in various applications may range from a minimum level (e.g., slightly raising the average internal energy) to an intense level resulting in ion fragmentation. Several research groups proposed using the effective temperature as a measure of ion activation under conditions of multiple ion-neutral collisions. Here we present approximate relationships for the effective ion temperature relevant to typical operation modes of RF multipole devices. We show that RF ion activation results in near-thermal energies for ions occupying an equilibrium position at the center of an RF trap, whereas increased ion activation can be produced by shifting ions off-center, e.g., by means of an external DC electric field. The ion dissociation in the linear quadrupole ion trap using the dipolar DC ion activation has been observed experimentally and interpreted in terms of the effective ion temperature.     

A comparative study of the fragmentation of neutral lactooligosaccharides in negative-ion mode by UV-MALDI-TOF and UV-MALDI ion-trap/TOF mass spectrometry

Structure analyses of underivatized neutral lacto oligosaccharides are systematically performed by ultraviolet matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (UV-MALDI TOF MS) and UV-MALDI ion-trap time-of-flight mass spectrometry (ion-trap/TOF MS) acquired in negative-ion mode. Interestingly, their fragmentation significantly differ each other. In postsource decay (PSD) in UV-MALDI TOF MS, cross-ring cleavage at the reducing terminal predominates. On the other hand, glycosyl bond cleavage (C-type fragmentation) takes place preferentially in collision induced dissociation (CID) in UV-MALDI ion-trap/TOF MS. The cross-ring cleavage in PSD similar to that in in-source decay occurs via a prompt reaction path characteristic of the UV-MALDI process itself. The product ion spectra of UV-MALDI ion-trap/TOF MS are similar to the electrospray ionization (ESI) ion-trap or quadrupole/TOF CID product ion spectra. During ion-trap/TOF MS experiments, the deprotonated molecular ions survive for several tens of milliseconds after CID event because the high internal energy chlorinated precursor ions are cooled by collisional cooling in the ion trap. The results obtained suggest that the PSD from the chlorinated precursor ion in UV-MALDI TOF MS might proceed as a two-step reaction; in the first, a high internal energy deprotonated molecular ion is generated as a reaction intermediate during the flight in the drift tube, and in the second, the rapid decomposition from the deprotonated molecular ion takes place.     

Substituent effects on the gas-phase fragmentation reactions of sulfonium ion containing peptides

The multistage mass spectrometric (MS/MS and MS3) gas-phase fragmentation reactions of methionine side-chain sulfonium ion containing peptides formed by reaction with a series of para-substituted phenacyl bromide (XBr where X=CH2COC6H4R, and R=--COOH, --COOCH3, --H, --CH3 and --CH2CH3) alkylating reagents have been examined in a linear quadrupole ion trap mass spectrometer. MS/MS of the singly (M+) and multiply ([M++nH](n+1)+) charged precursor ions results in exclusive dissociation at the fixed charge containing side chain, independently of the amino acid composition and precursor ion charge state (i.e., proton mobility). However, loss of the methylphenacyl sulfide side-chain fragment as a neutral versus charged (protonated) species was observed to be highly dependent on the proton mobility of the precursor ion, and the identity of the phenacyl group para-substituent. Molecular orbital calculations were performed at the B3LYP/6-31+G** level of theory to calculate the theoretical proton affinities of the neutral side-chain fragments. The log of the ratio of neutral versus protonated side-chain fragment losses from the derivatized side chain were found to exhibit a linear dependence on the proton affinity of the side-chain fragmentation product, as well as the proton affinities of the peptide product ions. Finally, MS3 dissociation of the nominally identical neutral and protonated loss product ions formed by MS/MS of the [M++H]2+ and [M++2H]3+ precursor ions, respectively, from the peptide GAILM(X)GAILK revealed significant differences in the abundances of the resultant product ions. These results suggest that the protonated peptide product ions formed by gas-phase fragmentation of sulfonium ion containing precursors in an ion trap mass spectrometer do not necessarily undergo intramolecular proton 'scrambling' prior to their further dissociation, in contrast to that previously demonstrated for peptide ions introduced by external ionization sources.     

Selective generation of charge-cependent/independent ion energy distributions from a heated capillary electrospray source

Retarding grid and Fourier transform ion cyclotron resonance (FTICR) mass spectrometry variable trap potential measurements are performed to determine factors that contribute to the kinetic energy distribution of ions formed in an electrospray source that uses a heated capillary for desolvation. The control of ion kinetic energies is achieved by manipulating the skimmer position in the postcapillary expansion and by varying the potential appEed to the skimmer. The selective generation of either charge-dependent or charge-independent ion energy distributions is demonstrated. Charge-dependent energy distributions of electro-sprayed ions are created by sampling ions near the Mach disk of the supersonic expansion and by using a larger diameter skimmer orifice; the FTICR spectra acquired under these conditions exhibit mass-to-charge ratio-dependent mass discrimination determined by the potential used to trap the ions. Charge-independent energies of electrosprayed ions are created by positioning the capillary adjacent to the skimmer to sample thermal ions and by using a smaller skimmer orifice to reduce expansion cooling; under these conditions ion kinetic energy is determined primarily by the skimmer potential and no mass-to-charge ratio-dependence is observed in the selection of optimum FTICR trapping conditions. The ability to select between proteins of different conformation on the basis of kinetic energy differences is demonstrated. For example, a 0.4 V difference in trap potential is observed in the selective trapping of open and closed forms of the +10 charge state of lysozyme. Finally, it is demonstrated that by operating the source under conditions which deliver a beam of ions with charge-independent energies to the cell, it is possible to obtain precursor and product ion signal magnitudes in FTTCR spectra without charge-dependent mass discrimina-tion.     

CID of singly charged antioxidants applied in lubricants by means of a 3D ion trap and a linear ion trap-Orbitrap mass spectrometer

The aim of this study was to investigate the fragmentation behavior induced by low‐energy collision‐induced dissociation (LE‐CID) of four selected antioxidants applied in lubricants, by two different types of ion trap mass spectrometers: a three‐dimensional ion trap (3D‐IT) and a linear IT (LIT) Orbitrap MS. Two sterically hindered phenols and two aromatic amines were selected as model compounds representing different antioxidant classes and were characterized by positive‐ion electrospray ionization (ESI) and LE‐CID. Various types of molecular ions (e.g. [M]^+?, [M + H]⁺, [M + NH₄]⁺ or [M + Na]⁺) were used as precursor ions generating a significant number of structurally relevant product ions. Furthermore, the phenolic compounds were analyzed by negative‐ion ESI. For both IT types applied for fragmentation, the antioxidants exhibited the same unusual LE‐CID behavior: (1) they formed stable radical product ions and (2) C? C bond cleavages of aliphatic substituents were observed and their respective cleavage sites depended on the precursor ion selected. This fragmentation provided information on the type of structural isomer usually not obtainable for branched aliphatic substituents utilizing LE‐CID. Comparing the two instruments, the main benefit of applying the LIT‐Orbitrap was direct access to elemental composition of product ions enabling unambiguous interpretation of fragmentation trees not obtainable by the 3D‐IT device (e.g. loss of isobaric neutrals). It should be emphasized that the types of product ions formed do not depend on the type of IT analyzer applied. For characterizing degradation products of antioxidants, the LIT‐Orbitrap hybrid system, allowing the determination of accurate m/z values for product ions, is the method of choice. Copyright © 2011 John Wiley & Sons, Ltd.     

High-throughput direct-infusion ion trap mass spectrometry: a new method for metabolomics

A fast method was developed to directly infuse raw plant extracts into a linear ion trap mass spectrometer, using the ion trap to isolate and fragment as many ions as possible from the extract. The full mass spectra can be analysed by multivariate statistics to determine discriminating ions, and the fragmentation data allows rapid classification or identification of these ions. The methodology was used to screen a wide range of strains of endophytic fungi in perennial ryegrass seeds for differences in metabolic profiles. The results show that this newly developed methodology is able to determine discriminating ions that can be present in very low concentrations. It also yielded sufficient fragmentation data to classify or identify the discriminating ions.     

Energetics and efficiencies of collision‐induced dissociation achieved during the mass acquisition scan in a quadrupole ion trap

Using n‐butylbenzene as a test molecule, evidence is provided that fast, efficient or highly energetic collision‐induced dissociation (CID) can be achieved during the mass acquisition ramp of a commercially available quadrupole ion trap (QIT) mass spectrometer. The method of excitation is very similar to axial modulation for mass range extension except that lower amplitude waveforms are used to excite the precursor ions within the trap instead of ejecting them from the trap. ITSIM simulations verify that fast kinetic excitation followed by kinetic‐to‐internal energy transfer occurs on the rapid time‐scale required for the recapture and mass analysis of product ions during the mass acquisition ramp. CID efficiencies larger than 50% can be obtained using this new approach and ratios of Th 91/92 of n‐butylbenzene fragment ions as large as 9 are possible, albeit at significantly reduced efficiencies. These very large ratios indicate an internal energy above 7 eV for the precursor ions indicating that fragmentation of larger ions could also be possible using this new approach. The main benefits of the new method are that no extra time is required for fragmentation or cooling and that on‐resonance conditions are guaranteed because the ions' secular frequencies are swept through the fixed frequency of excitation. Also presented are the effects of experimental variables such as excitation frequency, excitation amplitude and scan rate on the CID efficiencies and energetics. Copyright © 2005 John Wiley & Sons, Ltd.     

Beam-type collisional activation of polypeptide cations that survive ion/ion electron transfer

Doubly protonated peptides that undergo an electron transfer reaction without dissociation in a linear ion trap can be subjected to beam-type collisional activation upon transfer from the linear ion trap into an adjacent mass analyzer, as demonstrated here with a hybrid triple quadrupole/linear ion trap system. The activation can be promoted by use of a DC offset difference between the ion trap used for reaction and the ion trap into which the products are injected of 12-16 V, which gives rise to energetic collisions between the transferred ions and the collision/bath gas employed in the linear ion trap used for ion/ion reactions. Such a process can be executed routinely on hybrid linear ion trap/triple quadrupole tandem mass spectrometers and is demonstrated here with several model peptides as well as a few dozen tryptic peptides. Collisional activation of the peptide precursor ions that survive electron transfer frequently provides structural information that is absent from the precursor ions that fragment spontaneously upon electron transfer. The degree to which additional structural information is obtained by collisional activation of the surviving singly charged peptide ions depends upon peptide size. Little or no additional structural information is obtained from small peptides (<8 residues) due to the high electron transfer dissociation (ETD) efficiencies noted for these peptides as well as the extensive sequence information that tends to be forthcoming from ETD of such species. Collisional activation of the surviving electron transfer products provided greatest benefit for peptides of 8-15 residues.     

'Top-down' characterization of site-directed mutagenesis products of Staphylococcus aureus dihydroneopterin aldolase by multistage tandem mass spectrometry in a linear quadrupole ion trap

The gas-phase fragmentation reactions of a series of site-directed mutagenesis products of Staphylococcus aureus dihydroneopterin aldolase have been examined by multistage tandem mass spectrometry (MS/MS and MS(3)) in a linear quadrupole ion trap in order to explore the utility of this instrumentation for routine 'top-down' recombinant protein characterization. Following a rapid low resolution survey of the fragmentation behavior of the precursor ions from the wild type (WT) protein, selected charge states were subjected to detailed structural characterization by using high resolution 'zoom' and 'ultrazoom' resonance ejection MS/MS product ion scans. Dissociation of the [M + 18H](18+) charge state yielded a range of product ions from which extensive sequence information could be derived. In contrast, dissociation of the [M + 20H](20+) charge state resulted in a single dominant y(96) product ion formed by fragmentation between adjacent Ile/Gly residues, with only limited sequence coverage. Further extensive sequence information was readily obtained however, by MS(3) dissociation of this initial product. From the combined MS/MS and MS(3) spectra an overall sequence coverage of 66.9%, with fragmentation of 85 of the 127 amide bonds within the WT protein, was obtained. MS/MS and MS(3) of three of the four site-directed mutagenesis products (E29A), (Y61F) and (E81A) were found to yield essentially identical product ion spectra to the WT protein, indicating that these modifications had no significant influence on the fragmentation behavior. The specific site of modification could be unambiguously determined in each case by characterization of product ions resulting from fragmentation of amide bonds on either side of the mutation site. In contrast, MS/MS and MS(3) of the K107A mutant led to significantly different product ion spectra dominated by cleavages occurring N-terminal to proline, which restricted the ability to localize the modification site to within only an 8 amino acid region of the sequence. This work highlights the need for further studies to characterize the charge state, sequence and structural dependence to the low energy collision induced dissociation reactions of multiply protonated intact protein ions.     

An experimental approach to enhance precursor ion fragmentation for metabolite identification studies: application of dual collision cells in an orbital trap

Recent advancements in mass spectrometry including data-dependent scanning and high-resolution mass spectrometry have aided metabolite profiling for non-radiolabeled xenobiotics. However, narrowing down a site of metabolism is often limited by the quality of the collision-induced dissociation (CID)-based precursor ion fragmentation. An alternative dissociation technique, higher energy collisional dissociation (HCD), enriches compound fragmentation and yields 'triple-quadrupole-like fragmentation'. Applying HCD along with CID and data-dependent scanning could enhance structural elucidation for small molecules. Liquid chromatography/multi-stage mass spectrometry (LC/MS(n) ) experiments with CID and HCD fragmentation were carried out for commercially available compounds on a hybrid linear ion trap orbital trap mass spectrometer equipped with accurate mass measurement capability. The developed method included stepped normalized collision energy (SNCE) parameters to enhance MS fragmentation without tuning for individual compounds. All the evaluated compounds demonstrated improved fragmentation under HCD as compared with CID. The results suggest that an LC/MS(n) method that incorporated both SNCE HCD- and CID-enabled precursor ion fragmentation afforded comprehensive structural information for the compounds under investigation. A dual collision cell approach was remarkably better than one with only CID MS(n) in an orbital trap. It is evident that such an acquisition method can augment the identification of unknown metabolites in drug discovery by improving fragmentation efficiency of both the parent compound and its putative metabolite(s).     

Boundary effects and collisional activation in a quadrupole ion trap

The effects of storing ions at different values of the stability parameters a_z and q_zwere studied in a quadrupole ion trap, using helium or argon as buffer. A region was localized near the boundaries of the stability diagram in which the ions experience an increase in their kinetic energy. This is reflected in the occurrence both of fragmentation due to collisional activation and of a certain extent of ion loss due to unstable trajectories. The results of this excitation, referred to as ‘boundary effects,’ depend on the specific q_zat which the ion storage is performed and on the buffer gas used, and point to a simpler means of obtaining tandem mass spectra with the ion trap without the need to apply resonant tickle voltages between the end -cap electrodes.     

Rapid screening and characterization of drug metabolites using multiple ion monitoring dependent product ion scan and postacquisition data mining on a hybrid triple quadrupole‐linear ion trap mass spectrometer

Multiple ion monitoring (MIM)‐dependent acquisition with a triple quadrupole‐linear ion trap mass spectrometer (Q‐trap) was previously developed for drug metabolite profiling. In the analysis, multiple predicted metabolite ions are monitored in both Q1 and Q3 regardless of their fragmentations. The collision energy in Q2 is set to a low value to minimize fragmentation. Once an expected metabolite is detected by MIM, enhanced product ion (EPI) spectral acquisition of the metabolite is triggered. To analyze in vitro metabolites, MIM‐EPI retains the sensitivity and selectivity similar to that of multiple reaction monitoring (MRM)‐EPI in the analysis of in vitro metabolites. Here we present an improved approach utilizing MIM‐EPI for data acquisition and multiple data mining techniques for detection of metabolite ions and recovery of their MS/MS spectra. The postacquisition data processing tools included extracted ion chromatographic analysis, product ion filtering and neutral loss filtering. The effectiveness of this approach was evaluated by analyzing oxidative metabolites of indinavir and glutathione (GSH) conjugates of clozapine and 4‐ethylphenol in liver microsome incubations. Results showed that the MIM‐EPI‐based data mining approach allowed for comprehensive detection of metabolites based on predicted protonated molecules, product ions or neutral losses without predetermination of the parent drug MS/MS spectra. Additionally, it enabled metabolite detection and MS/MS acquisition in a single injection. This approach is potentially useful in high‐throughout screening of metabolic soft spots and reactive metabolites at the drug discovery stage. Copyright © 2009 John Wiley & Sons, Ltd.     

Probing reactive sites for ion-molecule reactions of anthraquinones with dimethyl ether using an external source ion trap tandem mass spectrometer and computational chemistry.

Gas-phase ion-molecule reactions of anthraquinone derivatives with dimethyl ether (DME) were investigated using an external source ion trap mass spectrometer. Semi-empirical calculations were executed to determine possible reactive sites for the product ions. Collision activated dissociation (CAD) was successfully performed for very low abundance of ion-molecule products. Even for product ions with a relative intensity below 1%, CAD experiments can be successfully performed. Significantly more structural information could be elucidated based on this special feature. Importantly, the CAD spectra of very minor ions could be measured by this ion trap instrument, which significantly enhances the future role of the ion trap as a powerful analytical instrument. CAD of all product ions on anthraquinone compounds typically eliminates neutral molecules such as CO or H(2)O. A hydration phenomenon in the CAD processes resulting from the precursor ions incorporating one molecule of H(2)O and then eliminating one molecule of CO was observed in this study.     

Surface-induced dissociation of peptide ions in Fourier-transform mass spectrometry

Peptide molecular ion species up to m/z 3055 introduced into a Fourier-transform mass spectrometer can be made to undergo extensive fragmentation by electrically floating the ion cell. The proportion of ions dissociated increases with increasing voltage, with 48 eV producing the highest absolute abundance of fragment ions above m/z 200. At this energy, spectra closely resemble those from photodissociation at 193 nm, indicating an internal energy deposition of 6–7 eV; change of product abundances with kinetic energy resembles a conventional breakdown curve. The precursor ions apparently are electrostatically attracted to strike screen wires across the ion cell entrance, producing daughter ions of low kinetic energy.