Biomimetic strengthening polylactide scaffold materials for bone tissue engineering

In this paper, a new polylactide (PLA)-based scaffold composite by biomimetic synthesis was designed. The novel composite mainly consists of nano-hydroxyapatite (n-HA), which is the main inorganic content in natural bone tissue for the PLA. The crystal degree of the n-HA in the composite is low and the crystal size is very small, which is similar to that of natural bone. The compressive strength of the composite is higher than that of the PLA scaffold. Using the osteoblast culture technique, we detected cell behaviors on the biomaterial in vitro by SEM, and the cell affinity of the composite was found to be higher than that of the PLA scaffold. The biomimetic three-dimensional porous composite can serve as a kind of excellent scaffold material for bone tissue engineering because of its microstructure and properties. Translated from Journal of Hunan University (Natural Sciences), 2006, 33(2) (in Chinese)     

Nanofibrous poly(lactic acid)/hydroxyapatite composite scaffolds for guided tissue regeneration

The production of nanofibrous PLA/HA composite scaffolds is described. The morphological, mechanical, surface, and thermal properties of the composites were extensively investigated. The results show that the mixture of PLA and HA formed smooth nanofibers without lumps. The incorporation of HA increased the mechanical strength of the nanofibers and changed the morphology, increasing the mean fiber diameter and pore size. Surface and internal properties confirmed that HA was homogeneously distributed inside the nanofibers and oriented towards their surface. The nanofiber composites allowed the adhesion and proliferation of pre-osteoblasts for up to 3 weeks.     

Adsorption of plasmid DNA on ceramic hydroxyapatite chromatographic materials

The adsorption of plasmid DNA onto two different types of ceramic hydroxyapatite beads with a particle diameter of 20 μm, namely Ceramic Hydroxyapatite Type II and the Type III, which is not commercially available, were investigated. Type II and the Type III have a pore diameter of 80 and 240 nm, respectively. Equilibrium and dynamic binding capacity for a 4.9 kbp model plasmid on Ceramic Hydroxyapatite Type II and Type III were enhanced by addition of NaCl to the adsorption buffer. This result indicates that the adsorption mechanism cannot be solely explained by electrostatic interaction. The affinities of plasmid DNA for Ceramic Hydroxyapatite Type II (with a K(D) of ≈0.005 mg/mL) and to Hydroxyapatite Type III (with a K(D) of ≈0.045 mg/mL) were not affected by NaCl, whereas the binding capacity was. This observation corroborates the assumption that a change of the shape of the plasmid molecule is affected and could be the reason for increased binding capacity with salt. The maximal binding capacity shows that at least a part of the CHT II bead must be accessible for the plasmid, whereas CHT III can be saturated with the plasmid. In both cases, an extremely hindered transport takes place.     

Gelatin‐based photopolymers for bone replacement materials

Gelatin‐based monomers were considered as suitable base component for the 3D structuring of potential bone replacement materials by stereolithographic techniques. Different methacrylate‐based gelatin derivatives were prepared, whereas a polyethylene glycol modified derivative GP4M turned out to have the highest tolerance toward other monomers. These are essential as they allow the tuning of the photoreactivity and the mechanical properties. Cell culture experiments with osteoblast‐ and endothelial‐like cells confirmed negligible cytotoxicity of these monomers. Finally, we were able to show the possibility of producing arbitrary cellular structures with these gelatin‐containing formulations using stereolithography. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

In vivo degradation behavior of Ca-deficient hydroxyapatite coated Mg-Zn-Ca alloy for bone implant application

In present paper, an in vivo study was carried out on uncoated and calcium-deficient hydroxyapatite (Ca-def HA) coated Mg-Zn-Ca alloy to investigate the effect of Ca-def HA coating on the degradation behavior and bone response of magnesium substrate. Magnesium alloy rods were implanted into rabbit femora and evaluated during 24 weeks implantation. The characterization of both implants indicates that in vivo degradation of the Ca-def HA coating and magnesium substrate occurs almost simultaneously, and in vivo valid life of the coating is about 8 weeks, after that the degradation rate of the coated implants increases obviously. The main reasons for the Ca-def HA coating degradation can be attributed to its reaction with body fluid and the substitution of Mg²⁺ ions in Ca-def HA. Histopathological examinations show that the Ca-def HA coating has good osteoconductivity and is in favor of the formation of more new bone on the surface of magnesium alloy. So the Ca-def HA coating could not only slow down in vivo degradation of magnesium alloy but also improve its bone response.     

用羟基磷灰石和单壁碳纳米管制备葡萄糖传感器的研究

在滴涂法制得单壁碳纳米管(SWNTs)修饰电极的基础上,采用电化学方法沉积纳米羟基磷灰石(HA)涂层,进而利用分子组装技术将葡萄糖氧化酶(GOD)固定到该电极上,制得的修饰电极的循环伏安测量结果表明,GOD发生了直接的电子传递.GOD-HA-SWNTs/GC修饰电极对不同浓度的葡萄糖呈现两个良好的线性响应范围,有望开发...     

Preparation and characterization of polyoxymethylene‐copolymer/hydroxyapatite nanocomposites for long‐term bone implants

In this work, new polyoxymethylene (POM)/hydroxyapatite (HAp) nanocomposites for long‐term bone implants have been obtained via extrusion and injection molding processes and characterized by differential scanning calorimetry (DSC), temperature‐modulated DSC (TMDSC), scanning electron microscopy (SEM), transmission electron microscopy (TEM), wide‐angle X‐ray diffraction (WAXD), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and tensile mechanical and in vitro stability tests. Based on the DSC results, it was found that the degree of crystallinity increases for POM/0.5% HAp sample and decreases for POM/1.0% HAp and POM/2.5% HAp. SEM and TEM observations for POM/HAp nanocomposites indicated that the dispersion of HAp in the polymer matrix was uniform and the diameter of the HAp particles was less than 100 nm for most of them. Young's modulus increases with increasing HAp concentration, whereby elongation at break decreases. On the contrary, HAp concentration does not have a significant influence on the tensile strength. TG results show that for POM/0.5% HAp, POM/1.0% HAp, and POM/2.5% HAp, thermal stability slightly increases in comparison to pure POM, whereas for POM/5.0 HAp and POM/10.0% HAp, lower thermal stability was observed. In vitro data reveal that with an increase of HAp content, bioactivity of nanocomposites increases; a good in vitro chemical stability of POM and POM nanocomposites was confirmed. Copyright © 2011 John Wiley & Sons, Ltd.     

Ordered mesoporous materials in the context of drug delivery systems and bone tissue engineering

Chemistry, materials science and medicine are research areas that converge in the field of drug delivery systems and tissue engineering. This paper tries to introduce an example of such an interaction, aimed at solving health issues within the world of biomaterials. Ordered mesoporous materials can be loaded with different organic molecules that would be released afterwards, in a controlled fashion, inside a living body. These materials can also react with the body fluids giving rise to carbonated nanoapatite particles as the products of such a chemical interaction; these particles, equivalent to biological apatites, enable the regeneration of bone tissue.     

Bioactive composites fabricated by freezing‐thawing method for bone regeneration applications

Hydrogels are widely used for controlled delivery of therapeutic agents. However, hydrogels lack bioactivity to encourage bone formation and mechanical integrity. Moreover, chemically crosslinked hydrogels exhibit cytotoxic effect. To overcome these limitations poly‐vinyl alcohol (PVA) and poly‐acrylic acid (PAA) blends were combined with ceramic materials based on β tricalcium phosphate, wollastonite, and magnesium silicate with different pore size distributions. The final 3D matrix was physically crosslinked using various freeze thawing (F/T) cycles. FTIR and SEM analysis showed that ceramics were dispersed within the polymer matrix and formed hydrogen bonds. Swelling studies in buffer solution pH 7.4 showed an increase in polymer swelling when ceramic was added. Furthermore, rheological testing demonstrated that incorporation of ceramics caused an increase in mechanical properties which varies with different pore size distributions of ceramics grains added. DSC thermograms showed increased T_g values for samples containing ceramics. Antimicrobial activity containing ciprofloxacin was tested against a pathogen associated with osteomyelitis and presented positive results with ciprofloxacin. The combination of increased strength and ability to encapsulate a clinically relevant antimicrobial agent indicates that the composite tested in this study has potential for the treatment of osteomyelitis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 761–773     

Xylan hemicellulose improves chitosan hydrogel for bone tissue regeneration

The hemicellulose xylan, which has immunomodulatory effects, has been combined with chitosan to form a composite hydrogel to improve the healing of bone fractures. This thermally responsive and injectable hydrogel, which is liquid at room temperature and gels at physiological temperature, improves the response of animal host tissue compared with similar pure chitosan hydrogels in tissue engineering models. The composite hydrogel was placed in a subcutaneous model where the composite hydrogel is replaced by host tissue within 1 week, much earlier than chitosan hydrogels. A tibia fracture model in mice showed that the composite encourages major remodeling of the fracture callus in less than 4 weeks. A non‐union fracture model in rat femurs was used to demonstrate that the composite hydrogel allows bone regeneration and healing of defects that with no treatment are unhealed after 6 weeks. These results suggest that the xylan/chitosan composite hydrogel is a suitable bone graft substitute able to aid in the repair of large bone defects. Copyright © 2016 John Wiley & Sons, Ltd.     

Summary of reference materials for the determination of the nutrient composition of foods

Certified reference materials (CRMs) play a critical role in validating the accuracy of nutrient data for food samples. A number of available food CRMs of differing matrix composition have assigned concentrations for various nutrients, along with associated uncertainty intervals (UIs) for those values. These CRMs have been used extensively in the United States Department of Agriculture’s (USDA) ongoing National Food and Nutrient Analysis Program (NFNAP) to monitor the accuracy of assays of key foods and nutrients consumed in the United States. A total of 690 assigned values for individual nutrients, including proximates, vitamins, macroelements, microelements, fatty acids, amino acids, and selected phytochemicals (e.g., carotenoids), were compiled from the certificates of analysis for 63 CRMs, and the specified UI in each case was expressed as a percentage of the assigned certified or reference concentration. Across all nutrients, 63.5% of the UIs were less than 10% of the assigned value, 25.5% were 10–20%, and 11% were greater than 20% of the assigned value. The UIs for proximates, minerals, and trace elements were most consistently less than 10% of the assigned value. The relative uncertainties were significantly higher for vitamins, suggesting greater challenges in measuring and certifying these components. These high UIs (greater than 10% assigned value) in the best available reference materials are likely to be indicative of the precision and accuracy that can be obtained by current measurement systems for these components. These data suggest that care must be taken in choosing CRMs to monitor food composition analysis, including evaluating what levels of uncertainty are required in assigned values and which analytical measurement systems for food components need closer examination and improvement. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. Presented at ‘BERM-10’, April 2006, Charleston, SC, USA.     

Nickel/cobalt based materials for supercapacitors

We briefly summarize the fundamental mechanism of supercapacitors and classify them into three kinds according to the different energy storage mechanism. We further discuss the energy storage mechanism of nickel/cobalt based materials, and we suggest that these kinds of battery-type materials should be classified into hybrid supercapacitor instead of pseudocapacitors.     

Inorganic p-type semiconductors and carbon materials based hole transport materials for perovskite solar cells

Incorporation of proper inorganic p-type semiconductors as hole transport layer has great potential to increase long-term stability while maintaining high power conversion efficiency of perovskite solar cells with low material cost.     

Introduction of a coiled solid‐phase microextraction fiber based on a coating of animal bone waste for chromatographic analysis

We attempt to introduce animal bone waste as a coating material with an organic−inorganic structure for the fabrication of a coiled solid‐phase microextraction fiber for the first time. The coiled fiber was simply prepared with the use of copper wire and coated with bone waste suspension through the dip‐coating method. The bone waste coating was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X‐ray diffraction analysis. It was applied as new type of solid‐phase microextraction fiber for preconcentration of polycyclic aromatic hydrocarbons before determination by high‐performance liquid chromatography with UV detection. A wide linear range 0.01–99.0 μg/L and limits of detection in the range 3.0–11.1 ng/L were obtained at optimized conditions. The bone waste coated coiled solid‐phase microextraction fiber has promise in sample preparation techniques because it is cost effective, available, stable in aqueous and organic solutions, environmentally friendly, and easy to fabricate and operate.     

Comparison between heparin-conjugated fibrin and collagen sponge as bone morphogenetic protein-2 carriers for bone regeneration

Bone morphogenetic protein-2 (BMP-2) is used to promote bone regeneration. However, the bone regeneration ability of BMP-2 relies heavily on the delivery vehicle. Previously, we have developed heparin- conjugated fibrin (HCF), a vehicle for long-term delivery of BMP-2 and demonstrated that long-term delivery of BMP-2 enhanced its osteogenic efficacy as compared to short-term delivery at an equivalent dose. The aim of this study was to compare the bone-forming ability of the BMP-2 delivered by HCF to that delivered by clinically utilized BMP-2 delivery vehicle collagen sponge. An in vitro release profile of BMP-2 showed that HCF released 80% of the loaded BMP-2 within 20 days, whereas collagen sponge released the same amount within the first 6 days. Moreover, the BMP-2 released from the HCF showed significantly higher alkaline phosphatase activity than the BMP-2 released from collagen sponge at 2 weeks in vitro. Various doses of BMP-2 were delivered with HCF or collagen sponge to mouse calvarial defects. Eight weeks after the treatment, bone regeneration was evaluated by computed tomography, histology, and histomorphometric analysis. The dose of BMP-2 delivered by HCF to achieve 100% bone formation in the defects was less than half of the BMP-2 dose delivered by collagen sponge to achieve a similar level of bone formation. Additionally, bone regenerated by the HCF-BMP-2 had higher bone density than bone regenerated by the collagen sponge-BMP-2. These data demonstrate that HCF as a BMP-2 delivery vehicle exerts better osteogenic ability of BMP-2 than collagen sponge, a clinically utilized delivery vehicle.     

Toughness enhancers for bone scaffold materials based on biocompatible photopolymers

Providing access to the benefits of additive manufacturing technologies in tissue engineering, vinyl esters recently came into view as appropriate replacements for (meth)acrylates as precursors for photopolymers. Their low cytotoxicity and good biocompatibility as well as favorable degradation behavior are their main assets. Suffering from rather poor mechanical properties, particularly in terms of toughness, several improvements have been made over the last years. Especially, thiol–ene chemistry has been investigated to overcome those shortcomings. In this study, we focused on additional means to further improve the toughness of an already established biocompatible vinyl ester‐thiol formulation, eligible for digital light processing‐based stereolithography. All molecules were based on poly(ε‐caprolactone) as building block and the formulations were tested regarding their reactivity and the resulting mechanical properties. They all performed well as toughness enhancer, ultimately doubling the impact resistance of the reference system. © 2018 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 110–119     

Isocationic substitution of copper(II) complexes in anisotropic materials based on benzenetricarboxylate

A phase transfer isocationic substitution of lattice constituent macrocyclic complexes by copper(II) aqua complexes occurs upon the interaction of crystalline mono-and bis(macrocyclic) copper carboxylate complexes with acetonitrile solutions of copper(II) ammine complex. On the other hand, these materials do not react with cupric bis(ethylenediamine). __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 2, pp. 124–129, March–April, 2007.     

羟基磷灰石合成工艺研究

羟基磷灰石 [Ｃａ10 (ＰＯ4 ) 6(ＯＨ) 2 ,简称ＨＡＰ]是80年代发展起来的新型牙科、骨科材料 ,其成份接近生物体骨质的无机成份 ,能诱发新骨生长 ,具有良好的生物相容性。ＨＡＰ的制备方法较多 ,有溶胶 凝胶法[1,2 ] 、沉淀法、电化学合成法[3 ,4 ] 等。1　实验1 1　试剂与仪器所用试剂除磷酸三丁酯为化学纯外 ,其它都是分析纯。美国尼高力公司 (ＮＩＣＯＬＥＴ)傅里叶变换红外光谱仪 (ＭＡＧＮＡ 5 5 0 (Ⅱ ) )。1 2　ＨＡＰ的制备1 2 1　溶胶 凝胶法合成ＨＡＰ　我们以不同原料制备了ＨＡＰ。第一种方法是以Ｃａ(ＮＯ3)2 与磷酸三丁…     

Fabrication of poly(lactide‐co‐glycolide) scaffold embedded spatially with hydroxyapatite particles on pore walls for bone tissue engineering

Poly(lactide‐co‐glycolide) (PLGA) scaffolds embedded spatially with hydroxyapatite (HA) particles on the pore walls (PLGA/HA‐S) were fabricated by using HA‐coated paraffin spheres as porogens, which were prepared by Pickering emulsion. For comparisons, PLGA scaffolds loaded with same amount of HA particles (2%) in the matrix (PLGA/HA‐M) and pure PLGA scaffolds were prepared by using pure paraffin spheres as porogens. Although the three types of scaffolds had same pore size (450–600 µm) and similar porosity (90%–93%), the PLGA/HA‐S showed the highest compression modulus. The embedment of the HA particles on the pore walls endow the PLGA/HA‐S scaffold with a stronger ability of protein adsorption and mineralization as well as a larger mechanical strength against compression. In vitro culture of rat bone marrow stem cells revealed that cell morphology and proliferation ability were similar on all the scaffolds. However, the alkaline phosphatase activity was significantly improved for the cells cultured on the PLGA/HA‐S scaffolds. Therefore, the method for fabricating scaffolds with spatially embedded nanoparticles provides a new way to obtain the bioactive scaffolds for tissue engineering. Copyright © 2011 John Wiley & Sons, Ltd.