Determination of fluorine concentrations in soil samples using proton induced gamma-ray emission

A non-destructive, in situ current normalized particle induced gamma-ray emission methodology has been standardized for quantification of fluorine (F) in soil samples from Punjab state, India. The samples were irradiated using 4 MeV proton beam from the Folded Tandem Ion Accelerator at BARC, Mumbai. The gamma rays of energies 197 and 478 keV arising from ¹⁹F(p, p′γ)¹⁹F and ⁷Li(p, p′γ)⁷Li nuclear reactions were measured using high resolution gamma-ray spectrometry. The concentration of fluorine in soil samples was found to vary between 414 and 5,746 mg kg^?1.     

同位素稀释-高分辨气相色谱/高分辨质谱测定大气中有机氯农药

建立了测定大气中25种有机氯农药(OCPs)的同位素稀释-高分辨气相色谱/高分辨质谱法(ID-HRGC/HRMS).样品用正己烷/二氯甲烷(1:1,v/v)进行加速溶剂萃取(ASE).通过柱洗脱实验、单柱和组合柱净化实验,最终确定样品的净化方案为弗罗里硅土固相萃取柱和石墨化炭黑固相萃取柱组合净化.样品萃取液净化后进行H...     

Determination of silicon dioxide in iron and steel-making slags and fluorspars by 14 MeV neutron activation and high-resolution gamma-ray spectrometry

Silicon as silicon dioxide in iron and steel-making slags and fluorspars was analyzed by 14 MeV neutron activation high-resolution γ-ray spectrometry. Silicon was detected by measuring the 1.78 MeV γ-ray of²⁸Al, the product of the²⁸Si(n, p) reaction, using a 30 cm³ coaxial Ge(Li) detector. A modified TPA method was used for the calculation.²⁸Al is also produced from phosphorus by the³¹P(n,α) reaction, and from aluminium by the²⁷Al(n,γ) reaction. The contribution from the former reaction could be corrected experimentally when the P₂O₅ content of the sample was known, while the latter reaction could be neglected in this neutron energy region. The experimental correction coefficient for phosphorus agreed well with the theoretical value calculated from the nuclear properties of silicon and phosphorus. Yields of²⁸Al from SiO₂, P₂O₅ and Al₂O₃ of the same weight percentages were calculated as 1, 0.426 (experimentally 0.44) and 0.0022, respectively. The results of this method agreed well with the results of the usual chemical methods. The limit of detection of SiO₂ in iron and steel-making slags and fluorspars was calculated as 0.07%. The coefficient of variation of repeated experiments was compared with the statistical one.     

Determination of nitrogen in steels by alpha-induced prompt gamma-ray spectrometry

The prompt gamma-ray of 871 keV emitted during the bombardment of steels by 5 MeV alpha particles were used to determine nitrogen by means of the reaction¹⁴N(α, pγ)¹⁷O. The method is non-destructive, rapid and experimentally simple. It has a sensitivity of about 7 μg·g⁻¹. In the nitrogen concentration range of 10¹–10² μg·g⁻¹ the relative precision of the method is about 3%. The accuracy of the method compares with that of other nuclear methods. Presented at the 5th Symposium on Recent Developments in Activation Analysis, Oxford, 17–21 July, 1978.     

Determination of metals in alloys by neutron capture gamma-ray spectrometry

A collimated neutron beam capable of providing a thermal neutron flux of 4.75·10⁷ n·cm⁻²·sec⁻¹ has been used to analyze alloy samples of 1–5 g during relatively short irradiation times of 30 min by the use of neutron capture gamma-ray spectrometry. The analyses were performed by using a mathematical treatment that relates the count ratio of every constituent present in the matrix with the concentration and thus it requires no standards. The technique was applied to the analysis of steel and gold alloy samples. Errors ranged from 0.8%–10%.     

Determination of226Ra in environmental samples using high-resolution inductively coupled plasma mass spectrometry

A time-saving and accurate technique for determining²²⁶Ra in groundwater and soil was examined, using high-resolution inductively coupled plasma-mass spectrometry (HR-ICP-MS). The technique was applied to the determination of²²⁶Ra in groundwater and soil samples and compared with the conventional liquid scintillation counting method. This technique was capable of completing²²⁶Ra counting within 3 minutes, without the in-growth period to allow radon and its progeny to achieve secular equilibrium with the parent²²⁶Ra. The detection limits of HR-ICP-MS for²²⁶Ra in groundwater and soil were 0.19 mBq·1⁻¹ and 0.75 Bq·kg⁻¹, respectively, which were about 10 times lower than that of the liquid scintillation counter. The results obtained from HR-ICP-MS in groundwater and soil were in accordance with those of LSC within a relative error of about 13%.     

Determination of free salsolinol concentrations in human urine using gas chromatography-mass spectrometry.

The urine concentrations of free salsolinol were determined in six healthy volunteers, using a gas chromatographic-mass spectrometric method with electron-capture negative-ion chemical ionization after derivatization with pentafluoropropionyl anhydride. The sensitivity of this method allows the quantification of salsolinol concentrations of 0.55 pmol/ml. The synthesis of [2H4]salsolinol from dopamine and [2H4]acetaldehyde via a Pictet-Spengler condensation is described; [2H4]salsolinol was used as the internal standard for salsolinol quantification. The urine concentrations of free salsolinol ranged from ca. 1 to 6 pmol/ml.     

Radiometric analysis of some building materials using gamma-ray spectrometry

Journal of Radioanalytical and Nuclear Chemistry - The present study focuses on the effect of natural radioactivity of some common building materials to humans. The main radiological risk...     

Rapid multi-element analysis of groundwater by high-resolution inductively coupled plasma mass spectrometry

A rapid and sensitive method was developed to determine, with a single dilution, the concentration of 33 major and trace elements (Na, Mg, Si, K, Ca, Li, Al, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Mo, Cd, In, Sn, Sb, Cs, Ba, Re, Hg, Pb, Bi, U) in groundwater. The method relies on high-resolution inductively coupled plasma mass spectrometry (HR ICP-MS) and works across nine orders of magnitude of concentrations. For most elements, detection limits for this method are considerably lower than methods based on quadrupole ICP-MS. Precision was within or close to ±3% (1) for all elements analyzed, with the exception of Se (±10%) and Al (±6%). The usefulness of the method is demonstrated with a set of 629 groundwater samples collected from tube wells in Bangladesh (Northeast Araiharzar). The results show that a majority of tube well samples in this area exceed the WHO guideline for As of 10 g L^–1, and that those As-safe wells frequently do not meet the guideline for Mn of 500 µg L^–1 and U of 2 µg L^–1.     

Determination of cadmium in coal using solid sampling graphite furnace high-resolution continuum source atomic absorption spectrometry

This work describes the development of a method to determine cadmium in coal, in which iridium is used as a permanent chemical modifier and calibration is performed against aqueous standards by high-resolution continuum source atomic absorption spectrometry (HR-CS AAS). This new instrumental concept makes the whole spectral environment in the vicinity of the analytical line accessible, providing a lot more data than just the change in absorbance over time available from conventional instruments. The application of Ir (400 g) as a permanent chemical modifier, thermally deposited on the pyrolytic graphite platform surface, allowed pyrolysis temperatures of 700 °C to be used, which was sufficiently high to significantly reduce the continuous background that occurred before the analyte signal at pyrolysis temperatures <700 °C. Structured background absorption also occurred after the analyte signal when atomization temperatures of >1600 °C were used, which arose from the electron-excitation spectrum (with rotational fine structure) of a diatomic molecule. Under optimized conditions (pyrolysis at 700 °C and atomization at 1500 °C), interference-free determination of cadmium in seven certified coal reference materials and two real samples was achieved by direct solid sampling and calibrating against aqueous standards, resulting in good agreement with the certified values (where available) at the 95% confidence level. A characteristic mass of 0.4 pg and a detection limit of 2 ng g^–1, calculated for a sample mass of 1.0 mg coal, was obtained. A precision (expressed as the relative standard deviation, RSD) of <10% was typically obtained when coal samples in the mass range 0.6–1.2 mg were analyzed.Dedicated to the memory of Wilhelm Fresenius     

Determination of vanadium in titanate-based ferroelectrics by INAA with discriminating gamma-ray spectrometry

Instrumental neutron activation analysis was used for determination of vanadium mass fraction in crystals of incipient ferroelectric strontium titanate and ferroelectric barium titanate. In order to improve vanadium limit of detection, discriminating gamma-ray spectrometry was used by inserting an absorption filter between the samples and an HPGe detector. The use of the absorption lead filter 6-mm thick yielded improvement of the vanadium limit of detection by a factor of two. The vanadium mass fraction determined in a quality control sample, which was NIST standard reference material SRM 1648 Urban Particulate Matter, was in close agreement with the certified value.

     

Determination of iodine in biological materials by pseudo-cyclic epithermal INAA using anti-coincidence gamma-ray spectrometry and estimation of expanded uncertainties

Epithermal instrumental neutron activation analysis (EINAA) technique in conjunction with anti-coincidence gamma-ray spectrometry (AC) has been applied for the determination of ppm to ppb levels of iodine in biological materials containing high levels of Al, Br, Cl, K, Mn, and Na. Both conventional EINAA-AC and pseudo-cyclic EINAA-AC (PC-EINAA-AC) methods using a combination of Cd and B filters have been developed using Dalhousie University SLOWPOKE-2 reactor (DUSR) facility. The expanded uncertainties (EU), at about 95% confidence level, for iodine in biological materials by EINAA-AC varied between 6 and 10%. The advantages of the non-destructive PC-EINAA-AC method has been successfully demonstrated by analyzing the NIST Pine Needles (SRM 1575) containing a low amount of iodine in presence of high quantities of Mn and other interfering elements where an iodine content of 92.8 μg kg⁻¹ with an EU of 6.1 μg kg⁻¹ and a detection limit of 40 μg kg⁻¹ has been obtained at the end of fourth cycle.     

Determination of selenium in foods by pseudo-cyclic neutron activation and anti-coincidence gamma-ray spectrometry

A pseudo-cyclic instrumental neutron activation analysis method in conjunction with anti-coincidence gamma-ray spectrometry (PC-INAA-AC) has been developed for the determination of ppb levels of Se. The method consists of repetitions of the irradiation-decay-counting cycles of a sample using the rapid transfer cyclic system at the Dalhousie University SLOWPOKE-2 reactor facility. The 162-keV γ-ray of ^77mSe (t _1/2 = 17.4 s) has been found to be highly selective. The precision and detection limits are significantly improved and the total experimental time drastically reduced by this method. Detection limits are between 2 and 9 ng. The accuracy of the method has been evaluated by analyzing a number of nutritional reference materials. The PC-INAA-AC method has been applied for the routine determination of Se to the composites of 135 food samples with values ranging from as low as 1 ng g⁻¹ for tea to 1,045 ng g⁻¹ for organ meats on fresh weight basis.     

Radioactivity in groundwater along the borders of Oman and UAE

Characterizing the quality and radioactivity of groundwater is vital as it represents valuable resource in arid regions. Here we present radioactivity level in groundwater collected from wells in a region along the border between Sultanate of Oman and United Arab Emirates (UAE). The aquifers are alluvium deposits (silt, sand and gravel) and the measured groundwater radioactivity (including ²³²Th, ²³⁸U, ²³⁵U, ²²⁶Ra, ²²²Rn, gross-α and gross-β) indicates values below the WHO permissible limits for drinking water. The results also show large difference in radioactivity fingerprints, in particular for ²²⁶Ra and ²²²Rn within the investigated aquifers. The data further indicate lower radioactivity in groundwater of the alluviums compared to the carbonate aquifers in the region. This feature makes the alluvium aquifers valuable reservoirs that should be carefully exploited as a source of groundwater. As this is the first investigation on the radioactivity of groundwater in alluvial aquifers in the region, it suggests that other alluvial deposits, particularly those inland and far from the marine water intrusion or seepage from carbonate rocks would have low radioactivity fingerprints.     

Determination of fluorine in tea using high-resolution molecular absorption spectrometry with electrothermal vaporization of the calcium mono-fluoride CaF

High-resolution continuum source molecular absorption of the calcium mono-fluoride molecule CaF in a graphite furnace has been used to determine fluorine in tea after acid digestion, alkaline solubilization and preparation of a conventional aqueous infusion. The strongest absorption ‘line’ of the CaF molecule is at 606.440 nm, which is part of the rotational fine structure of the X²Σ⁺ − A²Π electronic transition; it has a bond dissociation energy of 529 kJ mol⁻¹, which is comparable with other molecules used for fluorine determination. One advantage of using Ca as the molecule-forming reagent is that spectral interferences are extremely unlikely in the spectral range of its strongest absorption. Another advantage is that Ca acts both as molecule forming reagent and chemical modifier, so that no other reagent has to be added, making the method very simple. The only disadvantage is that Ca has a somewhat negative influence on the graphite tube lifetime. The limit of detection was found to be 0.16 mg L⁻¹ F, corresponding to 1.6 ng F absolute, and the calibration curve was linear in the range between 0.5 and 25 mg L⁻¹ with a correlation coefficient of R = 0.9994. The results obtained for a certified tea reference material were in agreement with the certified value on a 95% confidence level. There was also no difference between the results obtained after an acid digestion and an alkaline solubilization for 10 tea samples, based on a paired t-test. The values found in the 10 samples ranged between 42 μg g⁻¹ and 87 μg g⁻¹ F; the tea infusions contained between 21 μg g⁻¹ and 56 μg g⁻¹ F, with an extraction rate between 48% and 74%.     

Response operator in semiconductor gamma-ray spectrometry

A response operator technique for analysis of semiconductor -ray spectra utilizing vector model of scaling confirmatory factor analysis (SCFA) is presented. It has been pointed out that the new vector SCFA approach yields a noticeable rise of sensitivy of the semiconductor method for a great deal of spectrometric applications. It results to considerable detection limit decreasing (4–10 times for MSA) as compared to the commonly used traditional approach (peak net area calculation of full energy peak).     

Determination of silver in geological samples using high-resolution continuum source electrothermal atomic absorption spectrometry and direct solid sampling

A DNA biosensor was constructed by immobilizing DNA on a glassy carbon (GC) electrode modified with multiwall carbon nanotubes (MWNTs) dispersed in Nafion (DNA/MWNTs/GCE). The DNA-modified electrode exhibited two well-defined oxidation peaks corresponding to the guanine and adenine residues of DNA, respectively. The effects of the adsorption potential, DNA concentration and quantity of MWNTs used for DNA immobilization were investigated, as were the effects of buffer, pH and scan rate on the voltammetric behavior of DNA. Phenol, m-cresol and catechol showed noticeable inhibition towards the response of the electrode due to their interactions with DNA. These findings were used to design biosensors with linear response to these phenolic pollutants.     

A statistical approach to the choice of channel-width in gamma-ray spectrometry using empirical relations between resolution and gamma-ray energy

The problem of extra peak-broadening caused by the finite channel-width in multichannel gamma-ray spectrometry is discussed, using empirical equations for the relations between resolution and energy for NaI(T1) scintillation detectors and Ge(Li) drift detectors. Relations are derived and graphs designed to estimate the extra peak-broadening at a certain energy, caused by the compromise necessary when using a chosen energy scale in as few channels as possible.     

Simultaneous use of 82Br and 24Na radionuclides in the whole-body counting of animals by high-resolution gamma-ray spectrometry

In adult rats administered simultaneously with potassium ⁸²Br-bromide and ²⁴Na-sodium chloride, we demonstrated the parallel course of the excretion rates of bromide and sodium ions with the aid of in vivo whole-body counting of the animals by high-resolution gamma-ray spectrometry. The rats were exposed to various intakes of sodium ions accompanied by five different anions: Br⁻, Cl⁻, HCO₃ ⁻, ClO₄ ⁻, and SCN⁻. Regardless of the anion accompanying the sodium ion, the excretion rates of ⁸²Br⁻ and ²⁴Na⁺ ions were directly proportional to the magnitude of sodium intake in the rats.