共查询到20条相似文献,搜索用时 31 毫秒
1.
Due to their emission-free operation and high efficiency, photovoltaic cells (PVCs) have been one of the candidates for next-generation “green” power generators. However, PVCs require prolonged exposure to sunlight to work, resulting in elevated temperatures and worsened performances. To overcome this shortcoming, photovoltaic–thermal collector (PVT) systems are used to cool down PVCs, leaving the waste heat unrecovered. Fortunately, the development of thermoelectric generators (TEGs) provides a way to directly convert temperature gradients into electricity. The PVC–TEG hybrid system not only solves the problem of overheated solar cells but also improves the overall power output. In this review, we first discuss the basic principle of PVCs and TEGs, as well as the principle and basic configuration of the hybrid system. Then, the optimization of the hybrid system, including internal and external aspects, is elaborated. Furthermore, we compare the economic evaluation and power output of PVC and hybrid systems. Finally, a further outlook on the hybrid system is offered. 相似文献
2.
Hybrid organic–inorganic materials have been considered as a new candidate in the field of thermoelectric materials since the last decade owing to their great potential to enhance the thermoelectric performance by utilizing the low thermal conductivity of organic materials and the high Seebeck coefficient, and high electrical conductivity of inorganic materials. Herein, we provide an overview of interfacial engineering in the synthesis of various organic–inorganic thermoelectric hybrid materials, along with the dimensional design for tuning their thermoelectric properties. Interfacial effects are examined in terms of nanostructures, physical properties, and chemical doping between the inorganic and organic components. Several key factors which dictate the thermoelectric efficiency and performance of various electronic devices are also discussed, such as the thermal conductivity, electric transportation, electronic band structures, and band convergence of the hybrid materials. 相似文献
3.
Thermoelectric heat-to-power generation is an attractive option for robust and environmentally friendly renewable energy production. Historically, the performance of thermoelectric materials has been limited by low efficiencies, related to the thermoelectric figure-of-merit ZT. Nanostructuring thermoelectric materials have shown to enhance ZT primarily via increasing phonon scattering, beneficially reducing lattice thermal conductivity. Conversely, density-of-states (DOS) engineering has also enhanced electronic transport properties. However, successfully joining the two approaches has proved elusive. Herein, we report a thermoelectric materials system whereby we can control both nanostructure formations to effectively reduce thermal conductivity, while concurrently modifying the electronic structure to significantly enhance thermoelectric power factor. We report that the thermoelectric system PbTe-PbS 12% doped with 2% Na produces shape-controlled cubic PbS nanostructures, which help reduce lattice thermal conductivity, while altering the solubility of PbS within the PbTe matrix beneficially modifies the DOS that allow for enhancements in thermoelectric power factor. These concomitant and synergistic effects result in a maximum ZT for 2% Na-doped PbTe-PbS 12% of 1.8 at 800 K. 相似文献
4.
Integrating natural and artificial photosynthetic platforms is an important approach to developing solar‐driven hybrid systems with exceptional function over the individual components. A natural–artificial photosynthetic hybrid platform is formed by wiring photosystem II (PSII) and a platinum‐decorated silicon photoelectrochemical (PEC) cell in a tandem manner based on a photocatalytic‐PEC Z‐scheme design. Although the individual components cannot achieve overall water splitting, the hybrid platform demonstrated the capability of unassisted solar‐driven overall water splitting. Moreover, H 2 and O 2 evolution can be separated in this system, which is ascribed to the functionality afforded by the unconventional Z‐scheme design. Furthermore, the tandem configuration and the spatial separation between PSII and artificial components provide more opportunities to develop efficient natural–artificial hybrid photosynthesis systems. 相似文献
6.
This HPLC tutorial focuses on the preparation and use of kinetic plots to characterise the performance in isocratic and gradient LC. This graphical approach allows the selection of columns (i.e. optimum particle size and column length) and LC conditions (operating pressure and temperature) to generate a specific number of plates or peak capacity in the shortest possible analysis time. Instrument aspects including the influence of extra-column effects (maximum allowable system volume) and thermal operating conditions (oven type) on performance are discussed. In addition, the performance characteristics of porous-shell particle-packed columns and monolithic stationary phases are presented and the potential of future column designs is discussed. 相似文献
7.
Development of high‐performance organic thermoelectric (TE) materials is of vital importance for flexible power generation and solid‐cooling applications. Demonstrated here is the significant enhancement in TE performance of selenium‐substituted diketopyrrolopyrrole (DPP) derivatives. Along with strong intermolecular interactions and high Hall mobilities of 1.0–2.3 cm 2 V ?1 s ?1 in doping‐states for polymers, PDPPSe‐12 exhibits a maximum power factor and ZT of up to 364 μW m ?1 K ?2 and 0.25, respectively. The performance is more than twice that of the sulfur‐based DPP derivative and represents the highest value for p‐type organic thermoelectric materials based on high‐mobility polymers. These results reveal that selenium substitution can serve as a powerful strategy towards rationally designed thermoelectric polymers with state‐of‐the‐art performances. 相似文献
8.
Journal of Thermal Analysis and Calorimetry - A significant amount of the heat is lost in the vehicle exhaust and simply transferred to the environment. Using a thermoelectric generator (TEG), it... 相似文献
9.
The design of various multistage RO systems under different feed concentration and product specification is presented in this work. An optimization method using the process synthesis approach to design an RO system has been developed. First, a simplified superstructure that contains all the feasible design in present desalination process has been presented. It offers extensive flexibility towards optimizing various types of RO system and thus may be used for the selection of the optimal structural and operating schemes. A pressure vessel model that takes into account the pressure drop and concentration changes in the membrane channel has also been given to simulate multi-element performance in the pressure vessel. Then the cost equation relating the capital and operating cost to the design variables, as well as the structural variables of the designed system have been introduced in the objective function. Finally the optimum design problem can be formulated as a mixed-integer nonlinear programming (MINLP) problem, which minimizes the total annualized cost. The solution to the problem includes optimal arrangement of the RO modules, pumps, energy recovery devices, the optimal operating conditions, and the optimal selection of types and number of membrane elements. The effectiveness of this design methodology has been demonstrated by solving several seawater desalination cases. Some of the trends of the optimum RO system design have been presented. 相似文献
10.
Thermoelectric materials directly convert heat gradients into electrical energy, useful for the recovery of wasted heat generated by different processes. This article describes the thermoelectric effects, the physics of their origin, and the design and efficiency of thermoelectric generators. The different transport properties of solid state materials will be illustrated with basic chemical concepts to connect the physics and chemistry in solids. State of the art thermoelectric materials will be introduced to demonstrate the typical approaches and the influence of chemical and structural influences for a maximum thermoelectric efficiency. 相似文献
11.
传统液体温差电池较低的热电转换性能一直无法得到有效改善,亟需寻找新的热电转换机制来提升热电转换效率。本文采用分子动力学(MD)方法,数值模拟研究了不同温度下以不同配比的甘油-水为溶剂的氯化钠溶液在碳纳米管(CNT)内离子、分子分布情况。结果表明:离子、分子的分布受温度影响较大,近壁面净电荷、电势分布随温度升高出现明显的分层。根据模拟结果提出以CNT为电极材料,甘油氯化钠溶液或甘油水氯化钠溶液为电解质溶液组成温差电池。其热电转换性能远优于大多数温差电池,同时温度适用范围也显著增加。以多孔碳为电极材料,甘油氯化钠溶液为电解质溶液组成的热电转换装置实验验证了可行性。 相似文献
12.
With recent literature demonstrating enhancement of the thermoelectric performance of nanoscale materials relative to their corresponding bulk materials, methods to synthesize low-dimensional nanomaterials in large scale at low cost are needed. We demonstrate a method for preparing nanostructured dimagnesium silicide (Mg 2Si) thermoelectric materials that are nanocomposites with MgO by the reduction of diatomaceous earth (diatoms) using a gas-displacement solid state reaction with magnesium vapor. The resulting semiconducting Mg 2Si preserves the general morphology of the original diatoms and their nanosized grains at least down to the size of 30 nm. This reaction represents a possible method for the production of large quantities of low-cost nanoscale thermoelectric materials with potential for enhanced thermoelectric performance. 相似文献
13.
Metal@TiO 2 composites with a core–shell structure possess multifunctional properties. The demonstrated protocols for synthesizing such materials involve multiple steps, requiring precise control over the particle uniformity of the core and shell thickness, as well as complex surface modification. A simple approach to synthesizing metal@TiO 2 hybrid nanostructures remains a great challenge. Herein, we report on a one‐step method for the preparation of metal@TiO 2 core–shell nanospheres, which exhibited excellent performance in photocatalytic degradation of recalcitrant organic pollutants under visible light irradiation, and in catalytic reduction of nitrophenol in water. The simple method described here represents a sustainable approach to preparing core–shell materials at low cost, involving fewer chemicals, and requiring less energy, which will make a significant contribution toward large‐scale synthesis of high‐performance hybrid materials for photocatalytic applications. 相似文献
14.
A novel positive‐working, photosensitive polyimide, poly[1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐di(2‐nitrobenzyloxy)benzophenone‐3,3′,4,4′‐tetracarboxdiimide] (OPI‐Nb), developable with an aqueous base was prepared by the o‐nitrobenzylation of a polyimide, poly(1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐dihydroxybenzophenone‐3,3′,4,4′‐tetracarboxdiimide) (OPI), derived from 2,2′‐dihydroxy‐3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (DHBA) and 4,4′‐oxydianiline, and it micropatterning properties were investigated. The o‐nitrobenzylation of OPI to OPI‐Nb was conducted with o‐nitrobenzyl bromide in N‐methyl‐2‐pyrrolidinone containing Et 3N. The DHBA monomer was synthesized by exhaustive KMnO 4 oxidation of bis(2‐dimethoxy‐3,4‐dimethylphenyl)methane obtained by etherification of bis(2‐hydroxy‐3,4‐dimethylphenyl)methane with iodomethane, followed by deprotection of the methoxy groups and cyclodehydration of the obtained 2,2′‐dihydroxy‐3,3′4,4′‐benzophenonetetracarboxylic acid. The intermediate bis(2‐hydroxy‐3,4‐dimethylphenyl)methane was prepared by the condensation of 2,3‐dimethylphenol with paraformaldehyde. The degree of o‐nitrobenzylation was determined to be over 94 mol % from 1H NMR absorption of benzylic CH 2 protons. The aromatic OPI was perfectly soluble in a dilute aqueous NaOH solution and tetramethylammonium hydroxide (TMAH), whereas OPI‐Nb was not even swellable in them. In the micropatterning process, OPI‐Nb showed a line‐width resolution of 0.4‐μm and a sensitivity of 5.4 J/cm 2 when its thin films were irradiated with 365‐nm light and developed with a 2.38% aqueous TMAH solution at room temperature for 90 s. The thickness loss of OPI‐Nb films measured after postbaking at 350 °C was in the 8–9% range. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 776–788, 2007 相似文献
15.
Simple fabrication of organic–inorganic hybrid nanoflowers (TPP@CuhNfs and TPP@CohNfs) was achieved with tetraphenylporphyrin (TPP) as organic counterpart and Cu 2+ or Co 2+ ions as inorganic materials via a green route, with lower cost and controlled pH. The effect of pH levels and TPP concentrations on the morphology of the TPP@CuhNfs and TPP@CohNfs materials was examined by scanning electron microscopy (energy-dispersive X-ray [EDX]). The formation and chemical structures of TPP@CuhNfs and TPP@CohNfs were evaluated using Fourier transform infrared. Elemental analyses of these hybrid nanoflowers were carried out by EDX. The fabricated TPP@CuhNfs and TPP@CohNfs nanomaterials under optimum conditions act as effective reusable catalysts for the hydrogenation of nitroanilines in aqueous media at ambient temperature. The time-dependent hydrogenation can be easily monitored spectrophotometrically and verified by 1H-nuclear magnetic resonance. These types of the catalytic reaction or system are recorded to be useful toward the hydrogenation of nitroanilines, regardless of the position and type of substrate. Moreover, TPP@CuhNfs and TPP@CohNfs catalysts demonstrated a type of metal ions-dependent catalytic efficiency toward hydrogenation of nitroanilines (organic pollutants), with TPP@CuhNfs found to be more effective than TPP@CohNfs. However, both catalysts containing Cu 2+ and Co 2+ ions showed good performance and can be reused at least five times without a significant decline in yield. The presented approach based on hybrid nanoflowers provides as a low cost and ecofriendly method (green route) for different catalytic hydrogenations. 相似文献
16.
n‐type Mg 3Sb 2‐based compounds have emerged as a promising class of low‐cost thermoelectric materials due to their extraordinary performance at low and intermediate temperatures. However, so far, high thermoelectric performance has merely been reported in n‐type Mg 3Sb 2‐Mg 3Bi 2 alloys with a large amount of Bi. Moreover, current synthesis methods of n‐type Mg 3Sb 2 bulk thermoelectrics involve multi‐step processes that are time‐ and energy‐consuming. Herein, we report a fast and straightforward approach to fabricate n‐type Mg 3Sb 2 thermoelectrics using spark plasma sintering, which combines the synthesis and compaction in one step. Using this method, we achieve a high thermoelectric figure of merit zT of about 0.4–1.5 at 300–725 K in n‐type (Sc, Te)‐co‐doped Mg 3Sb 2 without alloying with Mg 3Bi 2. In comparison with the currently reported synthesis methods, the complexity, process time, and cost of our method are significantly reduced. This work demonstrates a simple, low‐cost route for the potential large‐scale production of n‐type Mg 3Sb 2 thermoelectrics. 相似文献
17.
The present study aims to investigate effects of nanofluid flooding on EOR and also compares its performance with water flooding in field scale using the published experimental data provided from core-scale studies. The nanofluid is based on water including silica nanoparticles. The relative permeability curves of water, nanofluid and oil for a light crude oil core sample obtained in an experimental study are used in this numerical investigation. A 2D heterogeneous reservoir model is constructed using the permeability and porosity of the last layer of SPE-10 model. It has been shown that nanofluid flooding can substantially improve the oil recovery in comparison with the water flooding case. Afterward, the operational parameters of the 13 injection and production wells have been optimized in order to meet the maximum cumulative oil production. First, pattern search (PS) algorithm was implemented which has a good convergence speed, but with a high probability of trapping in local optimum points. Particle swarm optimization (PSO) approach has also been employed, which requires a large number of population (to approach the global optimum) with so many simulations. Accordingly, a hybrid PSO–PS algorithm with confined domain is proposed. The hybrid algorithm starts with PSO and depending on the distribution density of the values of each parameter, confines the searching domain and provides a proper initial guess to be used by PS. It is concluded that the hybrid PSO–PS method could obtain the optimal solution with a high convergence speed and reduced possibility of trapping in local optimums. 相似文献
18.
Thermoelectric materials represent a new paradigm for harvesting low-grade heat, which would otherwise be dissipated to the environment uselessly. Relative to conventional thermoelectric materials generally composed of semiconductors or semi-metals, ionic thermoelectric materials are rising as an alternative choice which exhibit higher Seebeck coefficient and lower thermal conductivity. The ionic thermoelectric materials own a completely different thermoelectric conversion mechanism, in which the ions do not enter the electrode but rearrange on the electrode surface to generate a voltage difference between the hot and cold electrodes. This unique character has inspired worldwide interests on the design of ionic-type thermoelectric converters with attractive advantages of high flexibility, low cost, limited environmental pollution, and self-healing capability. Referring to the categories of ionic thermoelectric conversion, some representative ionic thermoelectric materials with their respective characteristics are summarized in this minireview. In addition, examples of applying ionic thermoelectric materials in supercapacitors, wearable devices, and fire warning system are also discussed. Insight into the challenges for the further development of ionic thermoelectric materials is finally provided. 相似文献
19.
Errors in stagnation-pressure measurement, due to a large temperature gradient at the face of a water-cooled enthalpy probe, were experimentally measured and numerically simulated. Two probes were used to measure the stagnation-pressure in a dc plasma jet; a standard water-cooled enthalpy probe and an uncooled ceramic (Thoria) probe. There was a maximum difference of 10% between the two measurements, with the water-cooled probe measuring lower pressures. Numerical simulations of plasma flow around the probe showed that the magnitude of the error depends on the thickness of the thermal boundary layer. The measurement error causes a maximum of 3% error in velocity measurements, using the Bernoulli equation. This error is no worse than other measurement errors associated with water-cooled enthalpy probe meaurements. 相似文献
20.
This paper presents a unique thermal control strategy to improve the ageing of the battery and to maintain the internal temperature of the battery within the optimum limit of 20 °C–40 °C for electric vehicle (EV) applications. The hybrid EV system encompasses photovoltaic (PV) module, high power density device supercapacitor (SC) and high energy density Li-ion battery (LIB) as an energy storage element. The vehicle dynamics encounter frequent voltage fluctuations in the direct current (DC) bus, which ultimately reduces the lifecycle of the battery and also the heat is generated inside the battery when it is connected in parallel to the DC bus. The frequent charging/discharging of LIB is controlled by the unique thermal control strategy of the hybrid EV system. The DC bus voltage is controlled by the SC bi-directional converter (BDC) where, the battery BDC delivers the essential constant current from the main source (PV) to the DC bus. This unique thermal control strategy supports the distribution of power from the PV/LIB/SC hybrid source system to the EV and also improves the battery life cycle. Due to constant charging/discharging of battery the thermal runaway (TR) problem such as leak, smoke, gas venting, rapid disassembly, flames etc., can be eliminated. Decoupling of load power and battery power comprises the growth in the battery lifecycle and to maintain the optimum internal temperature of the LIB by conditional flow of current through hybrid thermal management system (HTMS). To certify the thermal control strategy and to estimate the performance of HTMS, a simulation of a hybrid source system with vehicle dynamics is performed in MATLAB/Simulink. Numerical analysis of the LIB during constant charging/discharging is performed using ANSYS fluent software to validate the temperature effect of HTMS. 相似文献
|