Photocatalytic properties of mesoporous TiO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> films in gas-phase oxidation of alcohols

We have used the sol-gel template synthesis method to obtain mesoporous zirconium-containing titanium dioxide films and have studied their structural and sorption characteristics, surface acid function, and photocatalytic activity during gas-phase oxidation of aliphatic alcohols. We have shown that the zirconium content changes the acidity and specific surface area of the films, determining the rate at which the studied processes occur and the relative yield of reaction products. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 41, No. 6, pp. 354–359, November–December, 2005.     

Ionic conduction of a high-temperature modification of Lu<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript>

A nanoceramic product of the composition Lu₂Ti₂O₇ is synthesized by a coprecipitation method with a subsequent sublimation drying and an annealing at 650–1650°C. The conduction of Lu₂Ti₂O₇ synthesized at 1650°C is ionic (10^–3 S cm^–1 at 800°C). Thus, a new material with a high ionic conduction has been discovered. The ordering in Lu₂Ti₂O₇ is studied by methods of RFA, RSA, IK spectroscopy, electron microscopy, and impedance spectroscopy. The existence of a low-temperature phase transition fluorite-pyrochlore at 800°C and a high-temperature conversion order-disorder at 1650°C are established.Translated from Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 298–303.Original Russian Text Copyright © 2005 by Shlyakhtina, Ukshe, Shcherbakova.     

Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> powders by the complex polymerization method: synthesis,characterization and morphology

Lanthanum-modified bismuth titanate (Bi_3.25La_0.75Ti₃O₁₂, BLTO) powders were prepared by the complex polymerization method. The structure and morphology of BLTO powders were investigated by X-ray diffraction and scanning electron microscopy. The complexation of citric acid with the metallic cations was detected by Fourier transformed infrared (FT-IR). The thermal analyses of obtained gels were investigated by differential thermal gravimetric (DTG). The pure and normally stoichiometric phase of BLTO powders could be obtained at relatively low temperature of 550–700 °C even if the bismuth content is not excess in the starting precursors, while the secondary phase could be detected at lower and higher calcination temperatures. The shape of the BLTO grains is similarly to platelet in Bi-layer structure and stoichiometry BLTO was detected by the analysis of energy dispersive spectrometry.     

Sol–gel synthesis,characterization and photocatalytic activity of mesoporous TiO<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3 </Subscript>granules

Mesoporous TiO₂/γ-Al₂O₃ composite granules were prepared by combining sol–gel/oil-drop method, using various titania solution. The product granules can be used as a photocatalyst or adsorbent in moving, fluidized bed reactors. The phase composition and pore structure of the granules can be controlled by calcination temperature and using different titania solution. In the photocatalysis of NH₃ decomposition, TiO₂/γ-Al₂O₃ granules using Degussa P25 powder treated thermally at 450 °C showed the highest catalytic ability. However, TiO₂/γ-Al₂O₃ granules using titania made by hydrothermal method had comparable performance in NH₃ decomposition.     

Site engineering in chemical-solution-deposited Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> thin films using Ce,Zr, Mn and Si atoms

Ferroelectric Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films were fabricated by depositing sol-gel solutions on Pt(111)/Ti/SiO₂/Si (100) substrates. Crystallographic orientations of the BLT films were random, but the preferred orientations along (00l) and (117) axes were found. All films showed a single-phase bismuth-layered structure but the orientation in the films could be engineered by optimizing the growth condition, as well as by introducing dopant atoms such as Ce and Zr in the films, which in turn influenced the ferroelectric properties of the films significantly. The shape of c-axis-oriented grains was more plate-like, while that of (117)-oriented grains was rod-like. Small % substitution of Ce, Mn, and Zr atoms at Ti site enhanced the remanent polarization by approximately 20%, while substitution of Si atoms reduced the remanent polarization in BLT films but improved insulating properties. It was also demonstrated that fatigue endurance could be controlled by the concentration of dopant atoms, which was thought to be due to the decrease in oxygen vacancy concentration.     

Influence of NH<Subscript>3</Subscript>-treating temperature on visible light photocatalytic activity of N-doped P<Subscript>25</Subscript>-TiO<Subscript>2</Subscript>

The influence of NH₃-treating temperature on the visible light photocatalytic activity of N-doped P₂₅-TiO₂ as well as the relationship between the surface composition structure of TiO₂ and its visible light photocatalytic activity were investigated. The results showed that N-doped P₂₅-TiO₂ treated at 600°C had the highest activity. The structure of P₂₅-TiO₂ was converted from anatase to rutile at 700°C. Moreover, no N-doping was detected at the surface of P₂₅-TiO₂. There was no simply linear relationship between the visible light photocatalytic activity and the concentration of doped nitrogen, and visible light absorption. The visible light photocatalytic activity of N-doped P₂₅-TiO₂ was mainly influenced by the synergistic action of the following factors: (i) the formation of the single-electron-trapped oxygen vacancies (denoted as V_o^·); (ii) the doped nitrogen on the surface of TiO₂; (iii) the anatase TiO₂ structure.     

Modeling the active centers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> and V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> supported catalysts. DFT theoretical analysis of optical properties

Within the framework of the density functional theory (DFT), the electronic structure of monooxodioxovanadium functional groups in tetrahedral coordination, which model the active centers (ACs) of fine supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂, has been analyzed. The optimal structures of three ACs as possible models of monomeric and polymeric oxovanadium forms on the carriers with low vanadium content were determined. The modified DFT method involving the time dependence of Kohn-Sham equation (TDDFT) was used for the adopted AC models to calculate the energies of the excited states, and optical spectra of the absorption in 25000–60000 cm^?1 region were reconstructed on their base. The spectrum in this region is due to O → V charge transfer. The features of electronic spectra with the charge transfer for V₂O₅/SiO₂ and V₂O₅/TiO₂ catalysts and the vibrational spectra of three AC models corresponding to the monomeric and dimeric oxovanadium forms of the supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂ were defined. The detailed interpretation of normal vibration frequencies is given. The frequencies typical of the monomeric and dimeric oxovanadium forms on the carrier surface were identified.     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Hydrothermal synthesis,structure and photocatalytic property of nano-TiO<Subscript>2</Subscript>-MnO<Subscript>2</Subscript>

TiCl₄ and MnSO₄· H₂O as raw materials are hydrolyzed stiochiometrically, following the intermediate of oxide hydrating reacts at 150°C, 0.5 MPa in high-pressure reactor, after filtering, washing and drying, nanometric TiO₂-MnO₂ (Ti_1-X Mn _X O₂) is prepared. The effects of the reaction temperature and time on nanometric TiO₂-MnO₂ are also discussed. XRD shows that the product is TiO₂-MnO₂ with amorphous phase. After being sintered at above 780 °C, it transfers into Ti_1-X Mn _X O₂ with a rutile structure. TEM shows that TiO₂-MnO₂ is the spherical particle. And the average diameter of the particles is 20 nm. The optical absorbance was determined by UV-265 spectrophotometer after dispersing the sample in the mixture of water and glycerol with the ratio of 1 : 1 equably. It is found that the nano-material possesses the advantages of both nano-TiO₂ and nano-MnO₂, and it has strong absorption in the UV and visible region. Photodegradation of dyes in an aqueous solution is investigated using nanometricTiO₂-MnO₂ as a photocatalyst. The results show that after 60 min illumination, the decolorization rate of the acidic red B and acidic black 234 dye can be as high as 100%.     

Preparation and electrochemical properties of V<Subscript>2</Subscript>O<Subscript>5</Subscript> submicron-belts synthesized by a sol–gel H<Subscript>2</Subscript>O<Subscript>2</Subscript> route

One-dimensional (1D) submicron-belts of V₂O₅ have been prepared by a sol–gel route using V₂O_5, H₂O₂ and aniline as starting materials. Thermogravimetric and differential thermal analysis, X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy were employed to characterize the samples. Electrochemical behaviors as cathode material in rechargeable lithium-ion batteries were investigated by galvanostatic charge–discharge measurement and cyclic voltammeter. The results showed that the synthesized V₂O₅ appeared to be submicron-belts and orthorhombic structure. The V₂O₅ submicron-belts exhibited a high initial discharge capacity of 346 mAh/g and stayed 240 mAh/g after 20 cycles at 0.1 C discharge rate in the potential region 1.8–4.0 V.     

A new phosphor with flower-like structure and luminescent properties of Sr<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>: Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript> long afterglow materials by sol–gel method

The flower-like phosphors of Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ with high brightness and long afterglow were obtained by sol–gel method. X-ray diffraction pattern (XRD) shows that single-phased Sr₂MgSi₂O₇ phosphor is prepared by sol–gel method under 1250 °C. Scanning electron microscope (SEM) indicates that the phosphor consists of nano-sized whiskers which are detected for the first time in Eu²⁺ and Dy³⁺ co-doped long-lasting phosphorescence silicates. Furthermore, the investigation on the mechanism indicates that the internal structure and gas, liquid and solid phase effect play important roles in the formation of flower-like Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ nanostructure. Finally, the optical properties of flower-like Sr₂MgSi₂O₇ nanostructure have been characterized by photoluminescence (PL) spectra.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Synthesis and photocatalytic activity of TiO<Subscript>2</Subscript> nanoparticles fluorine-modified with TiF<Subscript>4</Subscript>

Fluorine-modified TiO₂ nan oparticles were synthesized by introducing TiF₄ as a fluorine source either before or after the sufficient hydrolysis and condensation of Ti(OEt)₄. The photocatalytic activity of the fluorine-modified catalysts was found to be greatly affected by the fluorine position in TiO₂ nanoparticles. When TiF₄ and Ti(OEt)₄ hydrolyzed with synchronization, the fluorine tended to be doped in the lattice. The formation of Ti³⁺ defects could result in charge recombination in bulk and bring down the photocatalytic activity. In contrast, if TiF₄ was introduced after the sufficient hydrolysis and condensation of Ti(OEt)₄. Ti−F bonds could exist mainly on the TiO₂ particles surface, which not only prevented the growth of anatase crystals but also facilitated the transfer of organic compounds from solution to catalyst surface by reducing the hydrophilic properties.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

Microwave-assisted combustion synthesis of nanocrystalline La<Subscript>2</Subscript>Mo<Subscript>2</Subscript>O<Subscript>9</Subscript> oxide-ion conductor and its characterization

Nanocrystalline La₂Mo₂O₉ oxide-ion conductor has been successfully synthesized by microwave-assisted combustion method within a very short time duration using aspartic acid as the newer fuel in a domestic microwave oven. The synthesized nanocrystalline powder showed good sinterability and reached more than 97% of theoretical density even at low temperature of 800 °C for 5 h. The sintered La₂Mo₂O₉ sample exhibited a conductivity of 0.159 S/cm in air at 750 °C.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Calorimetric study of melts in the System KF - K<Subscript>2</Subscript>NbF<Subscript>7</Subscript>

The relative enthalpies of melts in the system KF - K₂NbF₇ were measured by drop-calorimetry at the temperatures 1058, 1140 and 1208 K as a function of composition. Heat capacities of melted mixtures and enthalpies of mixing were determined using the experimental data. The molar heat capacity of melts diverges slightly from additivity. The molar enthalpy of mixing of melts shows small negative deviation from ideality which decreases with decreasing temperature. The thermal effect at mixing was assigned predominantly to association reactions producing more complex fluoroniobate anions.      

Preparation of novel visible-light-driven In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaIn<Subscript>2</Subscript>O<Subscript>4</Subscript> composite photocatalyst by sol–gel method

Novel visible-light-activated In₂O₃–CaIn₂O₄ photocatalysts were developed in this paper through a sol–gel method. The photocatalytic activities of In₂O₃–CaIn₂O₄ composite photocatalysts were investigated based on the decomposition of methyl orange under visible light irradiation (λ > 400 nm). The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and UV–vis diffused reflectance spectroscopy (DRS). The results revealed that the In₂O₃–CaIn₂O₄ composite samples with different In₂O₃ and CaIn₂O₄ content can be obtained by controlling the synthesis temperature, and the composite photocatalysts extended the light absorption spectrum toward the visible region. The photocatalytic tests indicated that the composite samples demonstrated high visible-light activity for decomposition of methyl orange. The significant enhancement in the In₂O₃–CaIn₂O₄ photo-activity under visible light irradiation can be ascribed to the efficient separation of photo-generated carriers in the In₂O₃ and CaIn₂O₄ coupling semiconductors.     

Effect of metal substitution for cobalt on the oxygen adsorption properties of YBaCo<Subscript>4</Subscript>O<Subscript>7</Subscript>

YBaCo₄O₇ compound is capable to intake and release a large amount of oxygen in the temperature range of 200–400°C. In the present study, the effect of Zn, Ga and Fe substitution for Co on the oxygen adsorption/desorption properties of YBaCo₄O₇ were investigated by thermogravimetry (TG) method. Due to fixed oxidation state of Zn2+ ions, the substitution of Zn²⁺ for Co²⁺ suppresses the oxygen adsorption of YBaCo_4−xZn_xO₇. The substitution of Ga³⁺ for Co³⁺ also decreases the oxygen absorption capacity of YBaCo_4−xGa_xO₇. This can be explained by the strong affinity of Ga³⁺ ions towards the GaO₄ tetrahedron. Compared with Zn- and Ga-substituted samples, the drop of oxygen adsorption capacity is smallest for Fe-substituted samples because of the similar changeability of oxidation states of Co and Fe ions.