Lipid-rhodopsin hydrophobic mismatch alters rhodopsin helical content

The ability of photoactivated rhodopsin to achieve the enzymatically active metarhodopsin II conformation is exquisitely sensitive to bilayer hydrophobic thickness. The sensitivity of rhodopsin to the lipid matrix has been explained by the hydrophobic matching theory, which predicts that lipid bilayers adjust elastically to the hydrophobic length of transmembrane helices. Here, we examined if bilayer thickness adjusts to the length of the protein or if the protein alters its conformation to adapt to the bilayer. Purified bovine rhodopsin was reconstituted into a series of mono-unsaturated phosphatidylcholines with 14-20 carbons per hydrocarbon chain. Changes of hydrocarbon chain length were measured by (2)H NMR, and protein helical content was quantified by synchrotron radiation circular dichroism and conventional circular dichroism. Experiments were conducted on dark-adapted rhodopsin, the photo-intermediates metarhodopsin I/II/III, and opsin. Changes of bilayer thickness upon rhodopsin incorporation and photoactivation were mostly absent. In contrast, the helical content of rhodopsin increased with membrane hydrophobic thickness. Helical content did not change measurably upon photoactivation. The increases of bilayer thickness and helicity of rhodopsin are accompanied by higher metarhodopsin II/metarhodopsin I ratios, faster rates of metarhodopsin II formation, an increase of tryptophan fluorescence, and higher temperatures of rhodopsin denaturation. The data suggest a surprising adaptability of this G protein-coupled membrane receptor to properties of the lipid matrix.     

Templated assembly of biomembranes on silica microspheres using bacteriorhodopsin conjugates as structural anchors

Membrane proteins are some of the most sophisticated molecules found in nature. These molecules have extraordinary recognition properties; hence, they represent a vast source of specialized materials with potential uses in sensing and screening applications. However, the strict requirement of the native lipid environment to preserve their structure and functionality presents an impediment in building biofunctional materials from these molecules. In general, the purification protocols remove the native lipid support structures found in the cellular environment that stabilize the membrane proteins. Furthermore, the membrane protein structure is often highly complex, typified by large, multisubunit complexes that not only span the lipid bilayer but also contain large (>2 nm) cytoplasmic and extracellular domains that protrude from the membrane. The present study is focused on using a biomimetic approach to build a stable, fluid microenvironment to be used to incorporate larger membrane proteins of interest into a tether-supported lipid bilayer membrane adequately spaced above a substrate passivated to liposome fusion and nonspecific adsorption. Our aim is to reintroduce the supporting structures of the native cell membrane using self-assembled supramolecular complexes constructed on microspheres in an artificial cytoskeleton motif. Central to our architecture is to utilize bacteriorhodopsin (bR), a transmembrane protein, as a biomembrane anchoring molecule to be tethered to surfaces of interest as a sparse structural element in the design. Compared to a typical lipid tether, which inserts into one leaflet of the lipid bilayer, bR anchoring provides an over 8-fold greater hydrophobic surface area in contact with the bilayer. In the work presented here, the silica microsphere surface was biofunctionalized with streptavidin to make it a suitable supporting interface. This was achieved by self-assembly of (p-aminophenyl)trimethoxysilane on the silica surface followed by subsequent conjugation of biotin-PEG3400 (PEG = poly(ethylene glycol) and PEG2000 for further passivation and the binding of streptavidin. We have conjugated bR with biotin-PEG3400 through amine-based coupling to use it as a tether. The biotin-PEG-bR conjugate was further labeled with Texas Red to facilitate localization via fluorescence imaging. Confocal microscopy was utilized to analyze the microsphere surface at different stages of surface modification by employing fluorescent staining techniques. Sparely tethered supported lipid bilayer membranes were constructed successfully on streptavidin-functionalized silica particles (5 mum) using a detergent-based method in which tethered bR nucleates self-assembly of the bilayer membrane. The fluidity of the supported membranes was analyzed using fluorescence recovery after photobleaching in confocal imaging detection mode. The phospholipid diffusion coefficients obtained from these studies indicated that nativelike fluidity was achieved in the tether-supported membranes, thus providing a prospective microenvironment for insertion of membrane proteins of interest.     

Determining the orientation of uniaxially rotating membrane proteins using unoriented samples: a 2H, 13C, AND 15N solid-state NMR investigation of the dynamics and orientation of a transmembrane helical bundle

Membrane protein orientation has traditionally been determined by NMR using mechanically or magnetically aligned samples. Here we show a new NMR approach that abolishes the need for preparing macroscopically aligned membranes. When the protein undergoes fast uniaxial rotation around the bilayer normal, the 0 degrees -frequency of the motionally averaged powder spectrum is identical to the frequency of the aligned protein whose alignment axis is along the magnetic field. Thus, one can use unoriented membranes to determine the orientation of the protein relative to the bilayer normal. We demonstrate this approach on the M2 transmembrane peptide (M2TMP) of influenza A virus, which is known to assemble into a proton-conducting tetrameric helical bundle. The fast uniaxial rotational diffusion of the M2TMP helical bundle around the membrane normal is characterized via 2H quadrupolar couplings, C-H and N-H dipolar couplings, 13C chemical shift anisotropies, and 1H T1rho relaxation times. We then show that 15N chemical shift anisotropy and N-H dipolar coupling measured on these powder samples can be analyzed to yield precise tilt angles and rotation angles of the helices. The data show that the tilt angle of the M2TMP helices depends on the membrane thickness to reduce the hydrophobic mismatch. Moreover, the orientation of a longer M2 peptide containing both the transmembrane domain and cytoplasmic residues is similar to the orientation of the transmembrane domain alone, suggesting that the transmembrane domain regulates the orientation of this protein and that structural information obtained from M2TMP may be extrapolated to the longer peptide. This powder-NMR approach for orientation determination is generally applicable and can be extended to larger membrane proteins.     

Molecular dynamics simulations of rhodopsin in different one-component lipid bilayers

Four 20 ns molecular dynamic simulations of rhodopsin embedded in different one-component lipid bilayers have been carried out to ascertain the importance of membrane lipids on the protein structure. Specifically, dimyristoyl phosphatidylcholine (DMPC), dipalmitoyl phosphatidylcholine (DPPC), palmitoyl oleoyl phosphatidylcholine (POPC), and palmitoyl linoleyl phosphatidylcholine (PLPC) lipid bilayers have been considered for the present work. The results reported here provide information on the hydrophobic matching between the protein and the bilayer and about the differential effects of the protein on the thickness of the different membranes. Furthermore, a careful analysis of the individual protein-lipid interactions permits the identification of residues that exhibit permanent interactions with atoms of the lipid environment that may putatively act as hooks of the protein to the membrane. The analysis of the trajectories also provides information about the effect of the bilayer on the protein structure, including secondary structural elements, salt bridges, and rigid-body motions.     

Dramatic destabilization of transmembrane helix interactions by features of natural membrane environments

Membrane proteins have evolved to fold and function in a lipid bilayer, so it is generally assumed that their stability should be optimized in a natural membrane environment. Yet optimal stability is not always in accord with optimization of function, so evolutionary pressure, occurring in a complex membrane environment, may favor marginal stability. Here, we find that the transmembrane helix dimer, glycophorin A (GpATM), is actually much less stable in the heterogeneous environment of a natural membrane than it is in model membranes and even common detergents. The primary destabilizing factors are electrostatic interactions between charged lipids and charged GpATM side chains, and nonspecific competition from other membrane proteins. These effects overwhelm stabilizing contributions from lateral packing pressure and excluded volume. Our work illustrates how evolution can employ membrane composition to modulate protein stability.     

Regulation of CD40 reconstitution into a liposome using different ratios of solubilized LDAO to lipids

The integral membrane protein CD40 was found on the surface of B lymphocytes that interact with CD40L on T cells during the immune response. The hydrophobic transmembrane domains of membrane proteins can be stabilized in detergent or in lipid bilayers such as liposomes. Membrane proteins can be incorporated into the liposome in a similar fashion to the way they are handled in vivo. In this study, a large amount of full-sequence CD40 was produced using a bacterial system that contained a Mistic construct. The CD40 was then reconstituted into liposomes by detergent-mediated reconstitution. All stages in the process of liposome disruption with various detergent ratios were easily observed by monitoring the optical density. The structure of the liposome and the reconstitution of CD40 were confirmed by cryo-TEM. The results of the present study show that the detergent ratio had an effect on the structure of the liposome and the amount of CD40 that was reconstituted into the liposome.     

Responses of Transmembrane Peptide and Lipid Chains to Hydrophobic Mismatch

Hydrophobic mismatch between the hydrophobic length of membrane proteins and hydrophobic thickness of membranes is a crucial factor in controlling protein function and assembly. We combined fluorescence with circular dichroism(CD) and attenuated total reflection infrared(ATR-IR) spectroscopic methods to investigate the behaviors of the peptide and lipids under hydrophobic mismatch using a model peptide from the fourth transmembrane domain of natural resistance-associated macrophage protein 1(Nramp1), the phosphatidylcholines(PCs) and phosphatidylglycerols(PGs) with different lengths of acyl chains(14:0, 16:0 and 18:0). In all PG lipid membranes, the peptide forms stable a-helix structure, and the helix axis is parallel to lipid chains. The helical span and orientation hardly change in varying thickness of PG membranes, while the lipid chains can deform to accommodate to the hydrophobic surface of embedded peptide. By comparison, the helical structures of the model peptide in PC lipid membranes are less stable. Upon incorporation with PC lipid membranes, the peptide can deform itself to accommodate to the hydrophobic thickness of lipid membranes in response to hydrophobic mismatch. In addition, hydrophobic mismatch can increase the aggregation propensity of the peptide in both PC and PG lipid membranes and the peptide in PC membranes has more aggregation tendency than that in PG membranes.     

The alphaM1 transmembrane segment of the nicotinic acetylcholine receptor interacts strongly with model membranes

The transmembrane domain of the nicotinic acetylcholine receptor (nAChR) plays a role in the regulation of the activity of this important ligand-gated ion channel. The lipid composition of the host membrane affects conformational equilibria of the nAChR and several classes of inhibitors, most notably anaesthetics, interact directly or indirectly with the four transmembrane M-segments, M1-M4, of the nAChR subunits. It has proven difficult to gain insight into structure-function relationships of the M-segments in the context of the entire receptor and the biomembrane environment. However, model membrane systems are well suited to obtain detailed information about protein-lipid interactions. In this solid-state NMR study, we characterized interactions between a synthetic alphaM1 segment of the T. californica nAChR and model membranes of different phosphatidylcholine (PC) lipids. The results indicate that alphaM1 interacts strongly with PC bilayers: the peptide orders the lipid acyl chains and induces the formation of small vesicles, possibly through modification of the lateral pressure profile in the bilayer. The multilamellar vesicle morphology was stabilized by the presence of cholesterol, implying that either the rigidity or the bilayer thickness is a relevant parameter for alphaM1-membrane interactions, which also has been suggested for the entire nAChR. Our results suggest that the model systems are to a certain extent sensitive to peptide-bilayer hydrophobic matching requirements, but that the lipid response to hydrophobic mismatch alone is not the explanation. The effect of alphaM1 on different PC bilayers may indicate that the peptide is conformationally flexible, which in turn would support a membrane-mediated modulation of the conformation of transmembrane segments of the nAChR.     

Design and synthesis of ladder-shaped tetracyclic, heptacyclic, and decacyclic ethers and evaluation of the interaction with transmembrane proteins

Ladder-shaped polyether (LSP) toxins represented by brevetoxins and ciguatoxins are thought to bind to transmembrane (TM) proteins. To elucidate the interactions of LSPs with TM proteins, we have synthesized artificial ladder-shaped polyethers (ALPs) containing 6/7/6/6 tetracyclic, 6/7/6/6/7/6/6 heptacyclic, and 6/7/6/6/7/6/6/7/6/6 decacyclic systems, based on the convergent method via alpha-cyano ethers. The ALPs possessing the simple iterative structure with different numbers of rings would be useful for structure-activity relationship studies on the molecular length, which is supposed to be important when naturally occurring LSPs elicit their toxicity. Two series of ALPs were prepared to evaluate the hydrophilic or hydrophobic effects of the side chains: (i) both sides were functionalized as diols (A series), and (ii) one side remained as diol and the other side was protected as benzyl ethers (B series). To examine the interaction of these ALPs with TM proteins, dissociation of glycophorin A (GpA) dimers into monomers was evaluated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The heptacyclic ether (ALP7B) elicited the most potent activity in the presence of 2% SDS buffer, whereas the decacyclic ether (ALP10A) exhibited an intriguing phenomenon to induce precipitation of GpA in a dose-dependent manner, under the low concentration of SDS (0.03%). ALP10A also induced precipitation of integrin alpha 1beta 1, a TM protein known to form heterodimers in the lipid bilayer membranes. The different activities among the ALPs can be accounted for by the concept of "hydrophobic matching" that is, lengths of the hydrophobic region including the side chains of ALP7B and ALP10A are ca. 25 A, which match the lengths of the hydrophobic region of alpha-helical TM proteins, as well as the hydrophobic thickness of lipid bilayer membranes. The concept of the hydrophobic matching would be a clue to understanding the interaction between LSPs and TM proteins, and also a guiding principle to design ALPs possessing potent affinities with TM proteins.     

Statistical analysis and exposure status classification of transmembrane beta barrel residues

Several computational methods exist for the identification of transmembrane beta barrel proteins (TMBs) from sequence. Some of these methods also provide the transmembrane (TM) boundaries of the putative TMBs. The aim of this study is to (1) derive the propensities of the TM residues to be exposed to the lipid bilayer and (2) to predict the exposure status (i.e. exposed to the bilayer or hidden in protein structure) of TMB residues. Three novel propensity scales namely, BTMC, BTMI and HTMI were derived for the TMB residues at the hydrophobic core region of the outer membrane (OM), the lipid-water interface regions of the OM, and for the helical membrane proteins (HMPs) residues at the lipid-water interface regions of the inner membrane (IM), respectively. Separate propensity scales were derived for monomeric and functionally oligomeric TMBs. The derived propensities reflect differing physico-chemical properties of the respective membrane bilayer regions and were employed in a computational method for the prediction of the exposure status of TMB residues. Based on the these propensities, the conservation indices and the frequency profile of the residues, the transmembrane residues were classified into buried/exposed with an accuracy of 77.91% and 80.42% for the residues at the membrane core and the interface regions, respectively. The correlation of the derived scales with different physico-chemical properties obtained from the AAIndex database are also discussed. Knowledge about the residue propensities and burial status will be useful in annotating putative TMBs with unknown structure.     

Microtechnologies for membrane protein studies

Despite the rapid and enormous progress in biotechnologies, the biochemical analysis of membrane proteins is still a difficult task. The presence of the large hydrophobic region buried in the lipid bilayer membrane (transmembrane domain) makes it difficult to analyze membrane proteins in standard assays developed for water-soluble proteins. To handle membrane proteins, the lipid bilayer membrane may be used as a platform to sustain their functionalities. Relatively slow progress in developing micro total analysis systems (μTAS) for membrane protein analysis directly reflects the difficulty of handling lipid membranes, which is a common problem in bulk measurement technologies. Nonetheless, researchers are continuing to develop efficient and sensitive analytical microsystems for the study of membrane proteins. Here, we review the latest developments, which enable detection of events caused by membrane proteins, such as ion channel current, membrane transport, and receptor/ligand interaction, by utilizing microfabricated structures. High-throughput and highly sensitive detection systems for membrane proteins are now becoming a realistic goal. Although most of these systems are still in the early stages of development, we believe this field will become one of the most important applications of μTAS for pharmaceutical and clinical screenings as well as for basic biochemical research.     

Mechanisms of the interaction of alpha-helical transmembrane peptides with phospholipid bilayers

The synthetic peptide acetyl-K(2)-G-L(24)-K(2)-A-amide (P(24)) and its analogs have been successfully utilized as models of the hydrophobic transmembrane alpha-helical segments of integral membrane proteins. The central polyleucine region of these peptides was designed to form a maximally stable, very hydrophobic alpha-helix which will partition strongly into the hydrophobic environment of the lipid bilayer core, while the dilysine caps were designed to anchor the ends of these peptides to the polar surface of the lipid bilayer and to inhibit the lateral aggregation of these peptides. Moreover, the normally positively charged N-terminus and the negatively charged C-terminus have both been blocked in order to provide a symmetrical tetracationic peptide, which will more faithfully mimic the transbilayer region of natural membrane proteins and preclude favorable electrostatic interactions. In fact, P(24) adopts a very stable alpha-helical conformation and transbilayer orientation in lipid model membranes. The results of our recent studies of the interaction of this family of alpha-helical transmembrane peptides with phospholipid bilayers are summarized here.     

Solvation of transmembrane proteins by isotropic membrane mimetics: a molecular dynamics study

Mixtures of organic solvents are often used as membrane mimetics in structure determination of transmembrane proteins by solution NMR; however, the mechanism through which these isotropic solvents mimic the anisotropic environment of cell membranes is not known. Here, we use molecular dynamics simulations to study the solvation thermodynamics of the c-subunit of Escherichia coli F1F0 ATP synthase in membrane mimetic mixtures of methanol, chloroform, and water with varying fractions of components as well as in lipid bilayers. We show that the protein induces a local phase separation of the solvent components into hydrophobic and hydrophilic layers, which provides the anisotropic solvation environment to stabilize the amphiphilic peptide. The extent of this effect varies with solvent composition and is most pronounced in the ternary methanol-chloroform-water mixtures. Analysis of the solvent structure, including the local mole fraction, density profiles, and pair distribution functions, reveals considerable variation among solvent mixtures in the solvation environment surrounding the hydrophobic transmembrane region of the protein. Hydrogen bond analysis indicates that this is primarily driven by the hydrogen-bonding propensity of the essential Asp(61) residue. The impact of the latter on the conformational stability of the solvated protein is discussed. Comparison with the simulations in explicit all-atom models of lipid bilayer indicates a higher flexibility and reduced structural integrity of the membrane mimetic solvated c-subunit. This was particularly true for the deprotonated form of the protein and found to be linked to solvent stabilization of the charged Asp(61).     

Comparison between the behavior of different hydrophobic peptides allowing membrane anchoring of proteins

Membrane binding of proteins such as short chain dehydrogenase reductases or tail-anchored proteins relies on their N- and/or C-terminal hydrophobic transmembrane segment. In this review, we propose guidelines to characterize such hydrophobic peptide segments using spectroscopic and biophysical measurements. The secondary structure content of the C-terminal peptides of retinol dehydrogenase 8, RGS9-1 anchor protein, lecithin retinol acyl transferase, and of the N-terminal peptide of retinol dehydrogenase 11 has been deduced by prediction tools from their primary sequence as well as by using infrared or circular dichroism analyses. Depending on the solvent and the solubilization method, significant structural differences were observed, often involving α-helices. The helical structure of these peptides was found to be consistent with their presumed membrane binding. Langmuir monolayers have been used as membrane models to study lipid–peptide interactions. The values of maximum insertion pressure obtained for all peptides using a monolayer of 1,2-dioleoyl-sn-glycero-3-phospho-ethanolamine (DOPE) are larger than the estimated lateral pressure of membranes, thus suggesting that they bind membranes. Polarization modulation infrared reflection absorption spectroscopy has been used to determine the structure and orientation of these peptides in the absence and in the presence of a DOPE monolayer. This lipid induced an increase or a decrease in the organization of the peptide secondary structure. Further measurements are necessary using other lipids to better understand the membrane interactions of these peptides.     

Functional consequences of lipid packing stress

When two monolayers of a non-lamellar lipid are brought together to form a planar bilayer membrane, the resulting structure is under elastic stress. This stress changes the membrane’s physical properties and manifests itself in at least two biologically relevant functional aspects. First, by modifying the energetics of hydrophobic inclusions, it influences protein–lipid interactions. The immediate consequences are seen in several effects that include changes in conformational equilibrium between different functional forms of integral proteins and peptides, membrane-induced interactions between proteins, and partitioning of proteins between different membranes and between the bulk and the membrane. Secondly, by changing the energetics of spontaneous formation of non-lamellar local structures, lipid packing stress influences membrane stability and fusion.     

Bilayer in small bicelles revealed by lipid-protein interactions using NMR spectroscopy

Intermolecular nuclear Overhauser effects (NOEs) between the integral outer membrane protein OmpX from Escherichia coli and small bicelles of dihexanoyl phosphatidylcholine (DHPC) and dimyristoyl phosphatidylcholine (DMPC) give insights into protein-lipid interactions. Intermolecular NOEs between hydrophobic tails of lipid and protein in the bicelles cover the surface area of OmpX forming a continuous cylindric jacket of approximately 2.7 nm in height. These NOEs originate only from DMPC molecules, and no NOEs from DHPC are observed. Further, these NOEs are mainly from methylene groups of the hydrophobic tails of DMPC, and only a handful of NOEs arise from methyl groups of the hydrophobic tails. The observed contacts indicate that the hydrophobic tails of DMPC are oriented parallel to the surface of OmpX and thus DMPC molecules form a bilayer in the vicinity of the protein. Thus, a bilayer exists in the small bicelles not only in the absence of but also in the presence of a membrane protein. In addition, the number of NOEs between the polar head groups of lipid molecules and protein is increased in the bicelles compared with those in micelles. This observation may be due to the closely packed head groups of the bilayer. Moreover, irregularity of hydrophobic interactions in the middle of the bilayer environment was observed. This observation together with the interactions between polar head groups and proteins gives a possible rationale for structural and functional differences of membrane proteins solubilized in micelles and in bilayer systems and hints at structural differences between protein-free and protein-loaded bilayers.     

Double cushions preserve transmembrane protein mobility in supported bilayer systems

Supported lipid bilayers (SLBs) have been widely used as model systems to study cell membrane processes because they preserve the same 2D membrane fluidity found in living cells. One of the most significant limitations of this platform, however, is its inability to incorporate mobile transmembrane species. It is often postulated that transmembrane proteins reconstituted in SLBs lose their mobility because of direct interactions between the protein and the underlying substrate. Herein, we demonstrate a highly mobile fraction for a transmembrane protein, annexin V. Our strategy involves supporting the lipid bilayer on a double cushion, where we not only create a large space to accommodate the transmembrane portion of the macromolecule but also passivate the underlying substrate to reduce nonspecific protein-substrate interactions. The thickness of the confined water layer can be tuned by fusing vesicles containing polyethyleneglycol (PEG)-conjugated lipids of various molecular weights to a glass substrate that has first been passivated with a sacrificial layer of bovine serum albumin (BSA). The 2D fluidity of these systems was characterized by fluorescence recovery after photobleaching (FRAP) measurements. Uniform, mobile phospholipid bilayers with lipid diffusion coefficients of around 3 x 10(-8) cm2/s and percent mobile fractions of over 95% were obtained. Moreover, we obtained annexin V diffusion coefficients that were also around 3 x 10(-8) cm2/s with mobile fractions of up to 75%. This represents a significant improvement over bilayer platforms fabricated directly on glass or using single cushion strategies.     

Activity of membrane proteins immobilized on surfaces as a function of packing density

A systematic study of the influence of the packing density of proteins on their activity is performed with cytochrome c oxidase (CcO) from R. sphaeroides as an example. The protein was incorporated into a protein-tethered bilayer lipid membrane and CcO was genetically engineered with a histidine-tag, attached to Subunit II, and then tethered by an interaction with functionalized thiol compounds bound to a gold electrode. The packing density was varied by diluting the functionalized thiol with a nonfunctionalized thiol that does not bind to the enzyme. After attaching the CcO to the gold surface, a lipid bilayer was formed to incorporate the tethered proteins. The reconstituted protein-lipid bilayer was characterized by surface enhanced infrared reflection absorption spectroscopy (SEIRAS), electrochemical impedance spectroscopy, surface plasmon resonance, and atomic force microscopy. The activity of the proteins within the reconstituted bilayer was probed by direct electrochemical electron injection and was shown to be very sensitive to the packing density of protein molecules. At low surface density of CcO, the bilayer did not effectively form, and protein aggregates were observed, whereas at very high surface density, very little lipid is able to intrude between the closely packed proteins. In both of these cases, redox activity, measured by the efficiency to accept electrons, is low. Redox activity of the enzyme is preserved in the biomimetic structure but only at a moderate surface coverage in which a continuous lipid bilayer is present and the proteins are not forced to aggregate. Electrostatic and other interaction forces between protein molecules are held responsible for these effects.     

Impact of Strong and Weak Lipid–Protein Interactions on the Structure of a Lipid Bilayer on a Gold Electrode Surface

A lipid bilayer deposited on an electrode surface can serve as a benchmark system to investigate lipid–protein interactions in the presence of physiological electric fields. Recoverin and myelin‐associated glycoprotein (MAG) are used to study the impact of strong and weak protein–lipid interactions on the structure of model lipid bilayers, respectively. The structural changes in lipid bilayers are followed using electrochemical polarization modulation infrared reflection–absorption spectroscopy (PM IRRAS). Recoverin contains a myristoyl group that anchors in the hydrophobic part of a cell membrane. Insertion of the protein into the 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphatidylcholine (DMPC)–cholesterol lipid bilayer leads to an increase in the capacitance of the lipid film adsorbed on a gold electrode surface. The stability and kinetics of the electric‐field‐driven adsorption–desorption process are not affected by the interaction with protein. Upon interaction with recoverin, the hydrophobic hydrocarbon chains become less ordered. The polar head groups are separated from each other, which allows for recoverin association in the membrane. MAG is known to interact with glycolipids present on the surface of a cell membrane. Upon probing the interaction of the DMPC–cholesterol–glycolipid bilayer with MAG a slight decrease in the capacity of the adsorbed lipid film is observed. The stability of the lipid bilayer increases towards negative potentials. At the molecular scale this interaction results in minor changes in the structure of the lipid bilayer. MAG causes small ordering in the hydrocarbon chains region and an increase in the hydration of the polar head groups. Combining an electrochemical approach with a structure‐sensitive technique, such as PM IRRAS, is a powerful tool to follow small but significant changes in the structure of a supramolecular assembly.     

Phosphate-mediated arginine insertion into lipid membranes and pore formation by a cationic membrane peptide from solid-state NMR

The insertion of charged amino acid residues into the hydrophobic part of lipid bilayers is energetically unfavorable yet found in many cationic membrane peptides and protein domains. To understand the mechanism of this translocation, we measured the (13)C-(31)P distances for an Arg-rich beta-hairpin antimicrobial peptide, PG-1, in the lipid membrane using solid-state NMR. Four residues, including two Arg's, scattered through the peptide were chosen for the distance measurements. Surprisingly, all residues show short distances to the lipid (31)P: 4.0-6.5 A in anionic POPE/POPG membranes and 6.5-8.0 A in zwitterionic POPC membranes. The shortest distance of 4.0 A, found for a guanidinium Czeta at the beta-turn, suggests N-H...O-P hydrogen bond formation. Torsion angle measurements of the two Arg's quantitatively confirm that the peptide adopts a beta-hairpin conformation in the lipid bilayer, and gel-phase 1H spin diffusion from water to the peptide indicates that PG-1 remains transmembrane in the gel phase of the membrane. For this transmembrane beta-hairpin peptide to have short (13)C-(31)P distances for multiple residues in the molecule, some phosphate groups must be embedded in the hydrophobic part of the membrane, with the local (31)P plane parallel to the beta-strand. This provides direct evidence for toroidal pores, where some lipid molecules change their orientation to merge the two monolayers. We propose that the driving force for this toroidal pore formation is guanidinium-phosphate complexation, where the cationic Arg residues drag the anionic phosphate groups along as they insert into the hydrophobic part of the membrane. This phosphate-mediated translocation of guanidinium ions may underlie the activity of other Arg-rich antimocrobial peptides and may be common among cationic membrane proteins.