Oxidized haematoxylin,a new reagent for the spectrophotometric determination of penicillins and cephalosporins

Haematoxylin—Chloramine-T in phosphate buffer (pH 7.0) is proposed as a new reagent for spectrophotometric determination of penicillins and cephalosporins in pure samples and pharmaceutical preparations. The method is based on acid hydrolysis of penicillins and cephalosporins with 5M HCl and subsequent treatment with oxidized haematoxylin. The resulting colour exhibits maximum absorption at 555 nm.     

Study of Interactions Between Sugammadex and Penicillins Using Affinity Capillary Electrophoresis

Sugammadex, a new modified gamma cyclodextrin, reverses the neuromuscular blockage induced by rocuronium by forming a strong complex with this muscle relaxant. To evaluate possible interactions with potentially co-administered drugs, interactions between sugammadex and penicillins were investigated using the affinity capillary electrophoresis method for the first time. Capillary electrophoresis coupled to an ultra violet detector was used as an analytical device for the analysis and detection of cyclodextrin inclusion complexes. Changes in the effective mobility of guest drugs (amoxicillin, ampicillin, oxacillin, dicloxacillin and azlocillin) were correlated with the increasing concentration of host molecules in background electrolyte, and successfully fitted into a non-linear curve equation; assuming 1:1 stoichiometric interaction. The calculated association constants (K _a) were: 383.44, 184.54, 265.34 and 95.06 M⁻¹ for amoxicillin, ampicillin, oxacillin and dicloxacillin, respectively. No complex formation with sugammadex could be detected for both penicillin G and piperacillin. The difference in the chemical structure of the penicillins, especially in the (R) side chains, is suggested to be responsible for the variety of binding strength between penicillins and sugammadex. The displacement study demonstrated that interactions between sugammadex and co-administered penicillins could reduce the pharmacological effects of both.

     

Synthesis of two metabolites of 2,4-diamino-5(3,4,5-trimethoxybenzyl)-pyrimidines (Trimethoprim)

The synthesis of two metabolites M₃ and M₄ of 2,4-diamino-5-(3, 4, 5-trimethoxybenzyl)-pyrimidine (trimethoprim, 1 ) is reported. M₃ (trimethoprim 1-oxide) as well as the isomeric 3-oxide were prepared by oxidation of 1 with m-chloroperbenzoic acid. The structure of M₃ was finally established by x-ra analysis [4]. The metabolite M₄ [2, 4-diamino-5-(3-hydroxy-4, 5-dimethoxy-benzyl)-pyrimidine] was prepared by condensation of 3-benzyloxy-4, 5-dimethoxybenzaldehyde ( 2 ) with 3-methoxypropionitrile ( 3 ) and guanidine followed by hydrogenolysis of the intermediate 3-benzyloxy compound 4 .     

A SEM/EDXA study on the chemical attack of aqueous NaOH/KOH solutions on the surface of the metal-metalloid glass (Fe, Cr)80 (P, C, Si)20 and Fe75Cr5P8C10Si2, respectively

After a treatment of the metal-metalloid glassy alloy (Fe, Cr)₈₀ (P, C, Si)₂₀ and Fe₇₅Cr₅P₈C₁₀Si₂, respectively, by aqueous alkaline solutions of 1.0M NaOH + 1.0M KOH and 2.5M NaOH + 2.5M KOH, respectively, a SEM/EDXA study of the glass surface was performed.The results of the accelerated ageing procedure demonstrate that the glass treated with the 1.0M NaOH + 1.0M KOH solution at room temperature (20 °C) is characterized by a surface state like that of the initial material.For the glass treatment with the 2.5M NaOH + 2.5M KOH solution at 20 °C the surface layer shows a different morphology and is thicker. It can be supposed that the reinforcing property is reduced.The glass treatment at 80 °C with the aqueous solutions 1.0M and 2.5M (NaOH + KOH), respectively, leads to surface layers of different morphology and such a layer is about 5 m thick. The strength of solid residue of such a treated glass is very low.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Living ring‐opening polymerization based on neighboring group participation

Cationic ring‐opening polymerization of a five‐membered cyclic dithiocarbonate having benzoxymethyl group; 5‐benzoxymethyl‐1,3‐oxathiolane‐2‐thione, was carried out with TfOH or TfOMe as an initiator in PhCl at rt – 60 °C. The molecular weight distribution (M_w/M_n) of the polymer obtained with TfOMe was very narrow even at 60 °C (M_w/M_n 1.14), and the Mn value of the polymers estimated by GPC was in good agreement with the molecular weight determined from ¹H‐NMR. The living nature of the polymerization was confirmed by the conversion dependence of the Mn (M_w/M_n) and the correlation of the experimental and theoretical M_n (M_w/M_n) values.     

N,N,N′,N′,N″‐penta(methyl acrylate)diethylenetriamine: A novel ligand for atom transfer radical polymerization of methyl methacrylate

A novel ligand, N,N,N′,N′,N″‐penta (methyl acrylate) diethylenetriamine (MA₅‐DETA), was synthesized by the reaction of diethylenetriamine with methyl acrylate in almost quantitive yield. The polymerizations of methyl methacrylate with MA₅‐DETA as the ligand and α,α‐dichlorotoluene (DCT) and ethyl 2‐bromoisobutyrate (2‐EBiB) as the initiators, respectively, under different conditions were examined. The polymerization with CuCl/MA₅‐DETA/DCT was closely controlled in bulk and gave polymers with quite narrow molecular weight distributions (M_w/M_n's) of 1.16–1.29. The polymerization with the system CuBr/MA₅‐DETA/EBiB in bulk gave high activity. However, the system was not well controlled and gave the polymers with M_w/M_n = 1.35–1.53. The solution polymerization in anisole with CuBr/MA₅‐DETA/EBiB showed a better‐controlled nature. Moreover, the addition of CuBr₂ into the aforementioned system can further improve its controllability. The M_w/M_n's of the resulting polymers ranged from 1.11 to 1.21. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1963–1969, 2004     

An investigation of polyhedral deformation in two mixed‐metal diarsenates: SrZnAs2O7 and BaCuAs2O7

Two isostructural diarsenates, SrZnAs₂O₇ (strontium zinc diarsenate), (I), and BaCuAs₂O₇ [barium copper(II) diarsenate], (II), have been synthesized under hydrothermal conditions and characterized by single‐crystal X‐ray diffraction. The three‐dimensional open‐framework crystal structure consists of corner‐sharing M2O₅ (M2 = Zn or Cu) square pyramids and diarsenate (As₂O₇) groups. Each As₂O₇ group shares its five corners with five different M2O₅ square pyramids. The resulting framework delimits two types of tunnels aligned parallel to the [010] and [100] directions where the large divalent nine‐coordinated M1 (M1 = Sr or Ba) cations are located. The geometrical characteristics of the M1O₉, M2O₅ and As₂O₇ groups of known isostructural diarsenates, adopting the general formula M1^IIM2^IIAs₂O₇ (M1^II = Sr, Ba, Pb; M2^II = Mg, Co, Cu, Zn) and crystallizing in the space group P2₁/n, are presented and discussed.     

Copolymerization of norbornene with ω‐alkenylaluminum as a precursor comonomer for introduction of carbonyl moieties

Norbornene copolymers functionalized with methyl ester group or carboxy group are facilely synthesized by the copolymerization of norbornene and 7‐octenyldiisobutylaluminum (ODIBA) with ansa‐dimethylsilylene(fluorenyl)(t‐butylamido)dimethyltitanium ( 1 ) activated by Ph₃CB(C₆F₅)₄, and the sequential CO₂/methanolysis reactions or CO₂/hydrolysis reactions, respectively. The methanolysis and the hydrolysis are simply switched by engaging acidic methanol or acidic aqueous acetone as the quenching/washing solution, respectively. Meanwhile, the increase of ODIBA in the copolymerization abruptly decreases the yield and number–average molecular weight (M_n) of the product. However, the addition of triisobutylaluminum (8 mM) and the use of excess Ph₃CB(C₆F₅)₄ (twofold of 0.4 mM of 1 ) significantly increase the yield, accompanying the increase in the M_n and the narrowing of the molecular weight distribution (M_w/M_n), especially in the case of the use of excess Ph₃CB(C₆F₅)₄. The yield (g polymer/g monomers), M_n, and M_w/M_n reach up to 0.82, 341,000, and 1.46, respectively, at a copolymerization condition. The carboxy groups in the norbornene copolymers are controlled in the range of 0–1.8 mol % in high polymer yields with high M_n and narrow M_w/M_n accompanied by the decrease in the contact angle with water from 104° to 89°. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5085–5090     

A kinetic stability study of <Emphasis Type="Italic">M</Emphasis>N<Subscript>5</Subscript> (<Emphasis Type="Italic">M</Emphasis>=Li,Na, K,and Rb)

A structure and kinetic stability study on some complexes with the general formula MN₅, where M are the alkali-metal atoms, Li, Na, K, and Rb, has been carried by using hybrid density functional methods. Complex B (C_2v) with two points of attachment to the N₅ ring is the most energetically favored for all metals considered here. Pyramidal structures A (C_5v) are kinetically unstable and they rapidly rearrange to the most stable planar structures B. At the QCISD(T)/6-311 + G*//B3LYP/6-311 + G* + ZPE (B3LYP/6-311 + G*) level, the decomposition barrier heights of LiN₅-B, NaN₅–B, KN₅-B, and RbN₅-B are predicted to be 19.9, 22.0, 22.5, and 23.0 kcal/mol, respectively. In addition, the rate constants of the decomposition reaction MN₅-B MN₃ + N₂ (M + Li, Na, K, and Rb) are also predicted using conventional transition state theory and canonical variational transition state theory, respectively.     

Explanation for the 3.4-power law for viscosity of polymeric liquids on the basis of the tube model

The viscosity η₀(M) of polymeric liquids of molecular weight M is calculated on the basis of the tube model formulated by Doi and Edwards (ref. 3). The contour length fluctuation of polymers along the tube, which was neglected in ref. 3, is now explicitly taken into account. The result is where M_c = 2M_e, and M_e is the molecular weight between the entanglement points. This result is numerically close to the empirical 3.4-power law, η₀(M) = η₀(M_c)(M/M_c)^3.4, for 10M_c ? M ? 100M_c but approaches the result in ref. 3 for very high molecular weight. We thus conclude that the 3.4-power law is actually an approximate expression for the real curve which slowly approaches the asymptotic form calculated in ref. 3.     

1,4-Phenylen-bis-diphenylderivate der Elemente der 5. Hauptgruppe des Periodensystems

Zusammenfassung Die Darstellung sämtlicher am mittleren Benzolkern p-substitutierten Verbindungen (C₆H₅)₂ MC₆H₄ M(C₆H₅)₂ mitM=N, P, As, Sb und Bi wird beschrieben. Für die bereits bekannte Stickstoff-bzw. Arsen-Verbindung konnte ein neuer Darstellungs-weg mit guten Ausbeuten gefunden werden, während die Antimon-und Wismutverbindung erstmals beschrieben werden. Durch Dipolmomentmessungen, UV- und IR-Aufnahmen ist ein Vergleich mit den einfachen Triphenylderivaten der genannten Elemente möglich.

---

The compounds p-(C₆H₅)₂ MC₆H₄ M(C₆H₅)₂,M=N, P, As, Sb, and Bi, were prepared. New methods for the preparation of the N and As compound with good yields were found. The Sb and Bi compound were synthesized for the first time. Dipole moments, IR- and UV-spectra of these compounds were compared with those of the triphenyl derivates.

---

---

Herrn Prof. Dr.F. Wessely zum 70. Geburtstag gewidmet.     

A STUDY OF LOW-TEMPERATURE CRYSTALLIZATION BEHAVIOR THE cis-1,4 POLYBUTADIENE PREPARED WITH RARE-EARTH CATALYST SYSTEM

The effects of molecular weight and temperature on crystallization processes at low tempera-ture for cis-1,4 polybutadiene prepared with rare-earth catalyst (Ln-PB) have been studied by WAXDmethod. In the range of molecular weight from     

Combining MN6 Octahedra and PN5 Trigonal Bipyramids in the Mica-like Nitridophosphates MP6N11 (M=Al,In)

Layered silicates are a very versatile class of materials with high importance to humanity. The new nitridophosphates MP₆N₁₁ (M=Al, In), synthesized from MCl₃, P₃N₅ and NH₄N₃ in a high-pressure high-temperature reaction at 1100 °C and 8 GPa, show a mica-like layer setup and feature rare nitrogen coordination motifs. The crystal structure of AlP₆N₁₁ was elucidated from synchrotron single-crystal diffraction data (space group Cm (no. 8), a=4.9354(10), b=8.1608(16), c=9.0401(18) Å, β=98.63(3)°), enabling Rietveld refinement of isotypic InP₆N₁₁. It is built up from layers of PN₄ tetrahedra, PN₅ trigonal bipyramids and MN₆ octahedra. PN₅ trigonal bipyramids have been reported only once and MN₆ octahedra are sparsely found in the literature. AlP₆N₁₁ was further characterized by energy-dispersive X-ray (EDX), IR and NMR spectroscopy. Despite the vast amount of known layered silicates, there is no isostructural compound to MP₆N₁₁ as yet.     

Monomer-isomerization polymerization. XI. Monomer-isomerization copolymerizations of 2-butene with 2-pentene and 2-hexene with Ziegler-Natta catalyst

2-Pentene and 2-hexene were found to undergo monomer-isomerization copolymerizations with 2-butene by Al(C₂H₅)₃–VCl₃ and Al(C₂H₅)₃–TiCl₃ catalysts in the presence of nickel dimethylglyoxime or transition metal acetylacetonates to yield copolymers consisting of the respective 1-olefin units. For comparison, the copolymerizations of 1-pentene with 1-butene and 1-hexene with 1-butene by Al(C₂H₅)₃–VCl₃ catalyst were also attempted. The compositions of the copolymers obtained from these copolymerizations were determined by using the calibration curves between the compositions of the respective homopolymer mixtures and the values of D₇₆₆/D₁₃₈₀ in the infrared spectra. The monomer reactivity ratios for the monomer-isomerization copolymerizations of 2-butene (M₁) with 2-pentene and 2-hexene, in which the concentrations of both 1-olefins calculated from the observed isomer distribution were used as those in the monomer feed mixture, and for the ordinary copolymerizations of 1-butene (M₁) with 1-pentene and 1-hexene by Al(C₂H₅)₃-VCl₃ catalyst were determined as follows: 2-butene (M₁)/2-pentene (M₂): r₁ = 0.14, r₂ = 0.99; 1-butene (M₁)/1-pentene (M₂): r₁ = 0.30, r₂ = 0.74; 2-butene (M₁)/2-hexene (M₂): r₁ = 0.11, r₂ = 0.62; 1-butene (M₁)/1-hexene (M₂): r₁ = 0.13, r₂ = 0.90.     

Conductance study of the complexation of substituted and lariat 16-crown-5 derivatives with alkali metal ions in nonaqueous solvents

Formation constants (K _ML) of 1:1 complexes of 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (L16C5) and 15,15-dimethyl-16-crown-5 (DM16C5) with alkali metal ions were determined in acetonitrile (AN) and propylene carbonate (PC) by conductometry at 25°C. Except for the case of Li⁺-and K⁺-16C5 complexes in PC, the selectivity sequences of L16C5 and DM16C5 are identical with those of the parent crown ether 16-crown-5 (16C5) regardless of the solvent (AN, PC, methanol) (Na¹ > Li⁺ > K⁺ > Rb⁺ > Cs⁺), which show the size-fit correlation. The selectivities of L16C5 and DM16C5 for the alkali metal ions are governed not by the sidearms but by the cavity size. The stability of the crown ether complex is dependent not on the dielectric constant but largely on the donor number of the solvent. TheK _ML(M₁ ⁺)/K _ML(M₂ ⁺) ratio of L16C5 or 16C5 varies very much with the solvent in the cases of M₁=Na, M₂=K and M₁=Na, M₂=Li, but that of DM16C5 is almost constant regardless of the solvent.     

Heterodinuclear M1M2 Complexes (M1=Ni,Pd, Pt; M2=Rh,Ir) Supported by a Tetradentate Phosphine Ligand and Their Application for Hydrosilylation

A new series of cationic heterodinuclear complexes, [M¹M²Cl₂(meso-dpmppp)(RNC)₂]PF₆ (M¹=Ni, M²=Rh, R=^tBu ( 1 a ); M¹=Pd, M²=Rh, R=^tBu ( 2 a ), Xyl ( 2 b ); M¹=Pt, M²=Rh, R=^tBu ( 3 a ), Xyl ( 3 b ); M¹=Pd, M²=Ir, R=^tBu ( 4 a )), supported by a tetradentate phosphine ligand, meso-Ph₂PCH₂P(Ph)(CH₂)₃P(Ph)CH₂PPh₂ (meso-dpmppp), were synthesized by stepwise reactions of meso-dpmppp with NiCl₂ ⋅ 6H₂O or MCl₂(cod) (M=Pd, Pt), forming mononuclear metalloligands of [M¹Cl₂(meso-dpmppp)], and with [M²Cl(cod)]₂ (M²=Rh, Ir) and RNC (R=^tBu, Xyl) in the presence of [NH₄][PF₆]. The related neutral PdRh complex, [PdRhCl₃(meso-dpmppp)(XylNC)] ( 5 ), was also prepared. The structures of 1 – 5 were determined by X-ray analyses to contain two square planar d⁸ metal centers with face-to-face arrangement, where meso-dpmppp supports M¹ and M² metal ions in cis/trans-P,P coordination mode, combining cis-{M¹P₂Cl₂} and trans-{M²P₂(CNR)₂} units. Complexes 1 – 4 showed an intence characteristic absorption around 422–464 nm derived from Rh^I→RNC MLCT transition (HOMO→LUMO+1), which are influenced by changing M¹ (Ni^II, Pd^II, Pt^II) metal ions since HOMO composed of dσ* orbitals appreciably destabilized by changing M¹ from Ni to Pd, and Pt. The electronic structures of 1 a – 4 a were investigated on the basis of DFT calculations and NBO analyses to show weak but noticeable d⁸–d⁸ metallophilic interaction as empirical dispersion energy of 0.9–1.5 kcal/mol without M¹–M² covalent bonding interaction. In addition, 1 – 5 were utilized as catalysts for hydrosilylation of styrene, and the NiRh complex 1 a was found to show higher activity and chemo- and regioselectivity compared with 2 – 5 .     

Maximum tensile properties of oriented polyethylene,achieved by uniaxial drawing of solution‐grown crystal mats: Effects of molecular weight and molecular weight distribution

The effects of molecular weight (MW) and MW distribution on the maximum tensile properties of polyethylene (PE), achieved by the uniaxial drawing of solution‐grown crystal (SGC) mats, were studied. The linear‐PE samples used had wide ranges of weight‐average (M_w = 1.5–65 × 10⁵) and number‐average MWs (M_n = 2.0–100 × 10⁴), and MW distribution (M_w/M_n = 2.3–14). The SGC mats of these samples were drawn by a two‐stage draw technique, which consists of a first‐stage solid‐state coextrusion followed by a second‐stage tensile drawing, under controlled conditions. The optimum temperature for the second‐stage draw and the resulting maximum‐achieved total draw ratio (DR_t) increased with the MW. For a given PE, both the tensile modulus and strength increased steadily with the DR_t and reached constant values that are characteristic for the sample MW. The tensile modulus at a given DR_t was not significantly affected by the MW in the lower DR_t range (DR_t < 50). However, both the maximum achieved tensile modulus (80–225 GPa) and strength (1.0–5.6 GPa), as well as those at higher DR_ts > 50, were significantly higher for a higher MW. Although the maximum modulus reached 225 ± 5 for M_n ≥ 4 × 10⁵, the maximum strength continued to increase with M_n even for M_n > 4 × 10⁵, showing that strength is more strongly dependent on the M_n, even at higher M_n. Furthermore, it was found that each of the maximum tensile modulus and strength achieved could be expressed by a unique function of the M_n, independently of the wide variations of the sample MW and MW distribution. These results provide an experimental evidence that the M_n has a crucial effect on the tensile properties of extremely drawn and chain‐extended PE fibers, because the structural continuity along the fiber axis increases with the chain length, and hence with the M_n. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 153–161, 2006     

Evaluation of K⊖ from [η]-M-data of binary and ternary polymer systems

Unperturbed dimensions of flexible linear macromolecules can be obtained from [η]-M-data in any solvent, good or poor, single or mixed. Usually K_θ is estimated by a relationship between [η]/M_W^0.5 and M_w^0.5 first proposed by Burchard and by Stockmayer and Fixman. But, it is well-known that the Burchard-Stockmayer-Fixman-plot shows downward curvature, especially for good solvent systems. Various efforts have been made to achieve relations with better linearity. One of the first was the semi-empirical relation between ([η]/M_w^0.5)^0.5 and M_w/[η] by Berry. Predicting a relationship of the excluded volume parameter z to the viscosity expansion factor by α⁵_η instead of α⁵_η Tanaka obtains that ([η]/M_w^0.5)^5/3 is linear in M_w^0.5. By allowing for the dependence of the viscometric interaction parameter B, which is correlated to the second virial coefficient A₂, on molar mass, Gavara, Campos and Figueruelo predict a linear dependence of [η]/M_w^0.5 against A₂.M_w^0.5. It is not our intention here to discuss the validity of these theories, but to compare them with experimental data.     

Sequence-length distribution in bulk and DMSO-derived acrylic acid/methylmethacrylate copolymers

The mean sequence lengths (l?) and probabilities (W) in the formation of various structural units were estimated for acrylic acid (AA) and methylmethacrylate (MMA) copolymers obtained in bulk and solution (DMSO) copolymerization. The results show that, although l₁:l₂ in bulk polymerization ranges from about 1:5 to about 5:1 when moving from lower to higher M₁ feeds in DMSO polymerization, the corresponding ranges is 1:25 to about 1:2, all in favor of the monomer M₂. The probability of the formation of structural units of a kind (e.g., doublets and triplets) that in bulk polymerization favors M₁ more than M₂ swings drastically in favor of M₂ when the polymerization is carried out in DMSO.