Calculation of the swirling flow of an ideal gas in a laval nozzle

The numerical solution of the problem of the motion of a swirling flow of an ideal gas in a Laval nozzle in axisymmetric formulation is obtained by the method of stabilization. As a result, a number of effects appear that are essentially not one-dimensional, in particular, the drawing-in of the sonic line into the nozzle, an effect that leads to a decrease in the nozzle's expansion coefficient. The dependence of this coefficient on the intensity of the swirling is obtained. A number of problems connected with the control of the expansion of a gas through a Laval nozzle and with variation of the thrust of a nozzle can be solved successfully in cases where a rotary motion is imparted to the flow of gas exhausted from the nozzle. Investigation of such a swirling flow in [1, 2] and a number of other papers are based on a one-dimensional model of gas flow, which makes it possible in principle to obtain integrated characteristics of the flow.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 72–76, September–October, 1971.     

Gas flow from a finite volume through a laval nozzle

Self-similar nonsteady flow in a Laval nozzle is considered; the flow is established when an ideal gas issues from a volume into a space at a sufficiently small pressure. The flow in the nozzle is assumed to be one-dimensional. Qualitative conclusions are formed on the effect of the nonsteady flow conditions on the distribution of M. For the case when the nonsteady properties have little effect, an asymptotic solution is obtained in quadratures and an example of a calculation is given.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 71–76, March–April, 1978.     

Control of a submerged jet in a thin rectangular cavity

An innovative method is presented for control of an oscillatory turbulent jet in a thin rectangular cavity with a thickness to width ratio of 0.16. Jet flow control is achieved by mass injection of a secondary jet into the region above the submerged primary jet nozzle exit and perpendicular to the primary nozzle axis. An experimental model, a 2-D and a 3-D computational fluid dynamics (CFD) model are used to investigate the flow characteristics under various secondary injection mass flow rates and injection positions. Two-dimensional laser Doppler anemometry (LDA) measurements are compared with results from the CFD models, which incorporate a standard k–ε turbulence model or a 2-D and 3-D realisable k–ε model. Experimental results show deflection angles up to 23.3° for 24.6% of relative secondary mass flow are possible. The key to high jet control sensitivity is found to be lateral jet momentum with the optimum injection position at 12% of cavity width (31.6% of the primary nozzle length) above the primary nozzle exit. CFD results also show that a standard k–ε turbulence closure with nonequilibrium wall functions provides the best predictions of the flow.     

Influence of the mixing of two flows with different total parameters in a laval nozzle on its integral characteristics

A calculation is made of the turbulent zone of mixing of two flows of viscous and heat conducting gas in a Laval nozzle. For such a nozzle of given geometry, a comparison is made of calculations of the integrated characteristics of flows that are nonuniform with respect to the total parameters in the framework of various models: laminar hydraulics, viscous laminar hydraulics, and total mixing without hydraulic losses. The calculations are made for a stationary, nonswlrling flow of a viscous heat conducting gas with nearly discontinuous step distribution of the total parameters at the entrance to an axisymmetric Laval nozzle of given geometry. In this situation, the gas flows with different total parameters at the entrance to the nozzle are separated by a surface near which the profiles of the flow parameters are specified on the basis of boundary-layer theory. In the blocked regime investigated here, the flow in the part where the nozzle becomes narrower and at least at the beginning of the expanding part does not depend on the pressure of the surrounding medium. The integrated characteristics of the nozzle (gas flow rate G, impulse I, specific impulse i = I/G, etc.) depend on the parameter distributions at the entrance to the nozzle, and also on the turbulent mixing of the flows in the mixing zone. To analyze the dependence of the integrated characteristics on the turbulent mixing, the values of these characteristics calculated in the framework of the three models are compared. The model of mixing without hydraulic losses presupposes complete equalization of the parameters of the original inhomogeneous flow in the constant-area chamber in front of the nozzle with conservation of the mass, energy, and momentum fluxes. The model of laminar hydraulics is described in detail in [1, 2]. The model of viscous laminar hydraulics will be described in Sec. 1.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 114–119, July–August, 1979.I thank A. N. Kraiko for supervising the work, A. N. Sekundov for helpful discussions, and I. P. Smirnova and A. B. Lebedev for making available the computer program.     

Draft of a nozzle with the circulating outflow of a vortical flow of gas

The presence of circulation in an outflowing gas leads to a change in the working parameters of a nozzle. The question of the mass flow rate and the draft of a nozzle without a diffusor (a point) for twisted flows has been studied theoretically and experimentally [1–6]. The use of nozzles with a supersonic part introduces a considerable degree of complication into the method for the analytical calculation of the draft characteristics and the program for their experimental investigation. In [2, 7], a theory of a nozzle is formulated for a model of a potential circulating flow of gas; in [5, 8], an electronic computer was used to solve the complete system of the equations of gasdynamics for the motion of a rotating flow along a nozzle; in [7, 9], an investigation was made of a variational problem of the shaping of a diffusor for a circulation flow. The calculation of the draft, carried out in the above-mentioned communications (with the exception of [2], in which a study was made of a partial model of an eddyless rotational motion), is bound up with labor-consuming computer calculations. In the present article, in a development of [3, 6], a quasi-one-dimensional theory of a supersonic nozzle for a vortical flow of gas is formulated and verified experimentally.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 145–149, September–October, 1975.     

Flow and Mixing Fields for Transported Scalar PDF Simulations of a Piloted Jet Diffusion Flame (‘Delft Flame III’)

Numerical simulation results are presented for ‘Delft Flame III’, a piloted jet diffusion flame with strong turbulence–chemistry interaction. While pilot flames emerge from 12 separate holes in the experiments, the simulations are performed on a rectangular grid, under the assumption of axisymmetry. In the first part of the paper, flow and mixing field results are presented with a non-linear first order k–ε model, with the transport equation for ε based on a modeled enstrophy transport equation, for cold and reactive flows. For the latter, the turbulence model is applied in combination with pre-assumed β-PDF modeling for the turbulence–chemistry interaction. The mixture fraction serves as conserved scalar. Two chemistry models are considered: chemical equilibrium and a steady laminar flamelet model. The importance of the turbulence model is highlighted. The influence of the chemistry model is noticeable too. A procedure is described to construct appropriate inlet boundary conditions. Still, the generation of accurate inlet boundary conditions is shown to be far less important, their effect being local, close to the nozzle exit. In the second part of the paper, results are presented with the transported scalar PDF approach as turbulence–chemistry interaction model. A C₁ skeletal scheme serves as chemistry model, while the EMST method is applied as micro-mixing model. For the transported PDF simulations, the model for the pilot flames, as an energy source term in the mean enthalpy transport equation, is important with respect to the accuracy of the flow field predictions. It is explained that the strong influence on the flow and mixing field is through the turbulent shear stress force in the region, close to the nozzle exit.     

Flow of gas mixtures with vibrational energy relaxation in plane and axisymmetric nozzles

A method is described for the calculation of plane and axisymmetric flows of gas mixtures with vibrational energy relaxation in the subsonic, transonic, and supersonic regions of the nozzle. The method is based on numerical solution of the inverse problem of nozzle theory. Results are given for the flow of a C0₂-N₂-H₂O-He mixture with vibrational relaxation and compared with the results of one-dimensional calculations. It is found that vibrational-energy relaxation has a significant effect on the gasdynamic parameters of flow in nozzles with large, relative expansion and therefore in choosing a nozzle shape, especially in the supersonic region, it is necessary to calculate the nonequilibrium flow. It is shown that the geometry of the transonic and supersonic regions of the nozzle has a considerable effect on the distribution of the inverse population of the level and the amplification factor.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 125–131, September–October, 1977.     

Supersonic ideal-gas flow of in the throat region of a nozzle

The problem of profiling a supersonic nozzle with uniform outlet flow is considered when the contour is constructed from a point on a given convergent section of the nozzle. It is shown that there are contours such that the flow in the throat is supersonic in choked regimes (as distinct from common notions of mixed or uniform sonic flow). The influence of flow nonuniformity in the throat region on the thrust of a supersonic nozzle is analyzed.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, pp. 132–139, May–June, 1996.     

Computation of base flow characteristics with uniform blowing

Blowing at bluff body base was considered under different conditions and for small amount of blowing this problem was solved using dividing streamline model [1]. The effect of supersonic blowing on the flow characteristics of the external supersonic stream was studied in [2–4]. The procedure and results of the solution to the problem of subsonic blowing of a homogeneous fluid at the base of a body in supersonic flow are discussed in this paper. Analysis of experimental results (see, e.g., [5]) shows that within a certain range of blowing rate the pressure distribution along the viscous region differs very little from the pressure in the free stream ahead of the base section. In this range the flow in the blown subsonic jet and in the mixing zones can be described approximately by slender channel flow. This approximation is used in the computation of nozzle flows with smooth wall inclination [6, 7]. On the other hand, boundary layer equations are used to compute separated stationary flows with developed recirculation regions [8] in order to describe the flow at the throat of the wake. The presence of blowing has significant effect on the flow structure in the base region. An increasing blowing rate reduces the size of the recirculation region [9] and increases base pressure. This leads to a widening of the flow region at the throat, usually described by boundary-layer approximations. At a certain blowing rate the recirculation region completely disappears which makes it possible to use boundary-layer equations to describe the flow in the entire viscous region in the immediate neighborhood of the base section.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 76–81, January–February, 1984.     

Investigation of the flow structure in nozzles with a throat section of constant height

The results of a theoretical and experimental investigation of the flow structure in plane nozzles with a throat section of constant height are presented. The effect of longitudinal and transverse deviations in the nozzle geometry on the transonic and supersonic flow parameters is studied.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 160–166, November–December, 1990.     

Calculation of three-dimensional weakly expanding flow in jets and channels

The results are given of a calculation of laminar flow in a channel of square section and the motion of a turbulent jet from a cruciform nozzle in an ambient flow. To calculate the secondary flows, the field of the transverse velocity is decomposed into irrotational and solenoidal components. The results of the calculation of the flow in the channel are compared with the calculations of other authors and experimental data. To calculate the flow in the turbulent jet, a one-parameter turbulence model is used, and the influence of the inhomogeneity of the distribution of the longitudinal component of the velocity on the components of the Reynolds stress tensor is taken into account. The results of calculation of the flow in the jet behind a cruciform nozzle are compared with experimental data.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 36–44, July–August, 1984.     

Effect of flow contraction on the level of turbulence

The results of an experimental investigation of the effect of flow contraction in the convergent nozzle of a subsonic wind tunnel on the level of turbulence are reported. The method of conducting the experiments and analyzing the data, which makes it possible to eliminate the effect of secondary factors on the results, is explained.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 146–152, March–April, 1987.     

Calculation of the flow of a two-phase mixture in a Laval nozzle,allowing for the turbulent diffusion of the particles

The flow of a mixture of gas and condensed particles in an axisymmetric Laval nozzle is considered. The motion of the particles is calculated in a specified field of gas flow, with due allowance for their turbulent diffusion. The results of calculations indicating the necessity of allowing for this phenomenon when considering the motion of particles toward the wall of a profiled nozzle are presented.Translated from Izvestiya Akademii Nauk SSSR, No. 2, pp. 161–165, March–April, 1973.     

Possibility of separationless flow in a nozzle with strongly curved walls

An example is given of calculation of the flow in a two-dimensional Laval nozzle whose profile in the subsonic part is concave with respect to the direction of the oncoming flow. Under the hypothesis of a separationless flow of ideal gas on the walls of the nozzle, regions of deceleration of the flow are absent. Then the well-known criteria suggest the existence of a separationless boundary layer, which must ensure that the flow as a whole is separationless.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 188–189, September–October, 1980.     

Investigation of nonequilibrium two-phase flows in axisymmetric laval nozzles

The singularities of two-phase flows in Laval nozzles were investigated within the framework of the model of a two-fluid continuous medium [1, 2] mainly in a quasi-one-dimensional approximation ([3] and the bibliography therein). Two-dimensional computations of such flows were performed only recently by using the method of buildup [4–7]. However, systematic computations to clarify the influence of the second phase on such fundamental nozzle characteristics as the magnitude of the specific impulse, its losses, and discharge coefficient were performed only in the quasi-one-dimensional approximation [8, 9] and only for the supersonic parts of the nozzle in the two-dimensional approximation under the assumption of uniform flow in the throat [10, 3]. Such an investigation is performed in this paper in the two-dimensional case for the nozzle as a whole, including the sub-, trans-, and supersonic flow domains, and a comparative analysis is given of the magnitudes of the loss of a unit pulse obtained in the quasi-one-dimensional approximation [8].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 86–91, November–December, 1977.     

On the possibility of blowing a gas jet into a supersonic flow without formation of a three-dimensional boundary-layer separation zone

We consider the flow formed by the interaction of a supersonic flow and a transverse sonic or supersonic jet blown at right angles to the direction of the main flow through a nozzle whose exit section is in a flat wall. When a gas jet is blown through a circular opening [1] the pressure rises in front of the jet because of the stagnation of the oncoming flow. This leads to separation of the boundary layer formed on the wall in front of the blowing nozzle. The resulting three-dimensional separation zone leads to a sharp increase in the pressure and the heat fluxes to the wall in front of the blowing nozzle, which is undesirable in many modern applications. The aim of the present investigation was to find a shape of the exit section of the blowing nozzle for which there is no three-dimensional separation zone of the boundary layer in front of the blowing nozzle.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 162–165, May–June, 1979.     

The effect of the arrangement of the openings on the amplification factor during asymmetric gas blowing into a laval nozzle

In asymmetric blowing of a gas into the supersonic part of a nozzle the main flow is perturbed by the jet which is being blown. Two interaction regimes are distinguished. In the first the perturbation of the main flow does not extend to the side of the nozzle opposite to the blast: the central angle subtended by the perturbation of the exit section of the nozzle is 2_a < 180 ° (Fig. 1). This regime is characterized by the fact that the curvature of the nozzle has no effect on the magnitude of the lateral force. In the second regime the zone of the perturbed flow extends to the side of the nozzle opposite to the blast (2_a > 180 °), and this leads to a decrease in the gradient of the lateral force with respect to the flow rate of the gas which is being blown. The first regime has been studied in the most detail.Translated fron Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6. pp. 136–141, November–December, 1984.     

Numerical study of flows of a viscous compressible gas and of an equilibrium gas mixture in a flat nozzle in the presence of strong blowing

The problem of the interaction of a viscous supersonic stream in a flat nozzle with a transverse gas jet of the same composition blown through a slot in one wall of the nozzle is examined. The complete Navier-Stokes equations are used as the initial equations. The statement of the problem in the case of the absence of blowing coincides with [1]. The conditions at the blowing cut are obtained on the assumption that the flow of the blown jet up to the blowing cut is described by one-dimensional equations of ideal gasdynamics. The proposed model of the interaction is generalized to the case of flow of a multicomponent gas mixture in chemical equilibrium. The exact solutions found in [2] are used as the boundary conditions at the entrance to the section of the nozzle under consideration. The results of numerical calculations of the flows of a homogeneous nonreacting gas and of an equilibrium mixture of gases consisting of four components (H₂, H₂O, CO, CO₂) are given for different values of the parameters of the main stream and of the blown jet. In the latter case it is assumed that the effect of thermo- and barodiffusion can be neglected.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 55–63, July–August, 1974.     

Specific momentum of a flow in the minimal cross section of a laval nozzle and in the outlet cross section of a contracting nozzle

The article discusses the question of the effect of nonuniformity of the parameters, brought about by the two-dimensional character of the flow on the value of the specific momentum of the flow under supercritical conditions. It is shown, that, in the approximation of an ideal (nonviscous and non-heat-conducting) gas, the corresponding value with a continuous flow always exceeds the value calculated in accordance with the one-dimensional theory for the same nozzle and the same stagnation parameters of the gas.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 186–188, January–February, 1976.     

Numerical and experimental investigation of a laval nozzle with a cylindrical throat

The results are reported of experimental and numerical investigation of mixed flow and of the parameters of heat transfer in the transonic region of an axisymmetric Laval nozzle whose throat is formed by a cylindrical surface, i.e., the nozzle contour near the minimum cross section contains two bends.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 189–192, September–October, 1984.