Bis(<Emphasis Type="Italic">gem</Emphasis>-dihalocyclopropanes): synthesis and heterocyclization upon treatment with nitronium triflate

A reaction of octa-1,7and deca-1,9-dienes with an excess of bromofluorocarbene proceeds predominantly with the formation of a monoadduct, whereas the bis-adduct can be prepared by repeated cyclopropanation. The [1+2] cycloaddition of dichlorocarbene to the monoadduct of bromofluorocarbene with deca-1,9-diene gave a new bis(cyclopropane) containing gem-dichloro- and gem-bromofluorocyclopropane fragments in one molecule. The bis-adducts obtained were subjected to the heterocyclization with nitronium triflate: in the case of bis(gem-bromofluorocyclopropane) the reaction proceeded with retention of one dihalocyclopropane fragment and gave mononuclear pyrimidine N-oxide.     

Acid-base and complexation properties of <Emphasis Type="Italic">gem</Emphasis>-diphosphonic and <Emphasis Type="Italic">gem</Emphasis>-diphosphinic acids in aqueous solutions and micellar media of surfactants

Acid-base and complexation properties of gem-disubstituted phosphorus acids, viz., methylenediphosphonic, 1-hydroxyethylidene-1,1-diphosphonic, P,P-diphenylmethylene-diphosphinic, and P, P-diphenyl-1-hydroxyethylidene-1, 1-diphosphinic acids, were studied in aqueous solutions and in the presence of biomimetics (micelles of ionic surfactants). The dissociation constants of the acids and stability constants of complexes with magnesium(II) and copper(II) ions were determined in aqueous solutions and microheterogeneous media containing sodium dodecyl sulfate, cetylpyridinium chloride, or cetylpyridinium nitrate (ionic strength 0.1 mol L^–1, temperature 25°C).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1919–1925, September, 2004.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Evaluation of the <Emphasis Type="Italic">Q</Emphasis><Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> absorption band maximum in a light-harvesting complex of the bacterial photosynthetic center <Emphasis Type="Italic">Thermochromatium tepidum</Emphasis>

Excitation energies of the bacteriochlorophyll (BChl) chromophores embedded in the photosynthetic light-harvesting complex of the purple bacterium Thermochromatium tepidum are computed using the time-dependent density functional theory based upon the fragmental molecular orbital (FMO-TDDFT) method. The results are correlated with the empirically based estimates of the Q _y absorption maximum, as well as with the observed large red shift induced by the binding of calcium.     

Halogenophilic and classical <Emphasis Type="Italic">Ad</Emphasis><Subscript><Emphasis Type="Italic">N</Emphasis></Subscript><Emphasis Type="Italic">E</Emphasis> mechanisms in nucleophilic vinylic substitution reactions involving the anions of transition metal carbonyls

The mechanism of the reaction of carbonylate anions ([M(CO) _n L]^–) with highly activated vinyl halides (Hal = Cl, Br, I) was investigated by the method of “anion traps” – the effect of proton donors on the composition of the reaction products. It was demonstrated that the reactions with PhCHal=C(Z)₂ (Hal = Br, I;Z=CN, CO₂Et) and PhCN=CClI take place through initial attack by the carbonylate at the halogen atom, the reactions with PhCCl=C(CO₂Et)₂ and PhCOCH=CHHal (Hal = Cl, I) take place through attack by the carbonylate at the π bond (Ad_NE mechanism), and in the case of E-and Z-PhCN=CHI the two mechanisms operate concurrently. The main laws determining the reaction mechanisms are analyzed.     

Spatial structure and stability of Mo<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Si<Subscript><Emphasis Type="Italic">m</Emphasis></Subscript> nanoparticles

By means of the ab initio DMol³ method Mo _n Si _m nanoparticles and fragments of Mo₃Si and MoSi₂ crystal lattices are theoretically modeled. For both crystals a few neutral Mo₄Si₆ and Mo₆Si₆ fragments of different shapes and symmetry are considered. In each case, after cluster separation its geometry is optimized, as a result of which the geometric structure noticeably changes and its stability increases. In order to theoretically search for the spatial configurations of Mo₄Si₆ and Mo₆Si₆ nanoparticle, two approaches are used: 1) in the most stable Fe₄C₆ and Fe₆C₆ isomers found previously, iron and carbon atoms are replaced by molybdenum and silicon respectively and then the geometry is optimized to obtain new equilibrium distances and angles; 2) the search for main Mo₄Si₆ and Mo₆Si₆ configurations is performed using the binominal scheme, starting from Mo₂, MoSi, and Si₂ dimers. The nanoparticle structures are found to contain metal atom chains and isolated pairs and triples of silicon atoms. In most cases, the nanoparticle stability proves to be higher than that of the crystal clusters.     

Accelerating <Emphasis Type="Italic">k</Emphasis><Subscript>0</Subscript>

Combining the powers of a fast pneumatic transport system and the Automatic Activation Analyzer (AAA) of the Atominstitut in Vienna with the newest version of the IAEA k ₀-Software, the application of the k ₀-method to the determination of short-lived radionuclides becomes easily possible. By calculating Asp-values with the IAEA software, the often expensive and time-consuming measurement of Asp-values using certified reference materials is reduced to quality control checks. Measurements clearly show that the two approaches are equivalent, especially since both take self-absorption and neutron self-shielding into account. In this way it is possible to expand the library of the AAA with many hitherto unobtainable Asp-values. At the same time, using highly accurate Asp-values already measured for many short-lived radionuclides, k ₀-values for those can be produced with a simple procedure.     

Electrodeposition of Fe<Subscript> <Emphasis Type="Italic">x</Emphasis> </Subscript>Se<Subscript> <Emphasis Type="Italic">y</Emphasis> </Subscript> films from acidic solutions

Iron selenide (Fe_xSe_y) thin films were electrodeposited on a glassy carbon electrode (GCE) surface under constant potential and pulse potential modes. The deposition mechanism was investigated using cyclic voltammetry. Electrochemical processes at room temperature are accompanied by adsorption of selenium on the electrode surface and complicated by chemical reactions in the solution bulk. Several approaches to control the film stoichiometry were applied: varying of electrodeposition potential; the use of elevated temperatures (60–80°C) to decrease the electrode passivation and electrodissolution of interfering elements under pulse mode. The composition of Fe_xSe_y thin films was analyzed using an energy dispersive X-rays (EDX) analysis.     

Splitting of the <Emphasis Type="Italic">d</Emphasis><Superscript><Emphasis Type="Italic">N</Emphasis></Superscript> atomic states in icosahedral 3<Emphasis Type="Italic">d</Emphasis> metal endofullerenes M@C<Subscript>60</Subscript>

Group-theoretical and quantum-chemical investigations of the spectrum of low-lying excited states have been performed by the ROHF and FCI-RAS (Full CI in Restricted Active Space) methods for 3d metal endofullerenes (MEFs) M@C₆₀ (M =Mn, Cr, and Fe) in different charged states. The major purpose of this study is quantum-chemical verification of the anomalous (“non-Bethe’s”) character of splitting of the d ^N atomic states in an electrostatic field with icosahedral symmetry, predicted previously within the theory of integral invariants theory. The interrelation between the integral invariants theory and the quantumchemical methods applied in this work is considered in detail. Our calculations suggest that the d ^N atomic states in the icosahedral field generated by fullerene C60 (I _h ) on a metal atom (ion) remain non-split for different charged states of the metal and C₆₀. Reasons for this phenomenon and other possible approaches to verification of the prediction are discussed. It is demonstrated that the d ^N states of the encapsulated metal are split in icosahedral 3d MEFs only under very strong compression of these structures.     

Carbenoid rearrangement in the series of substituted <Emphasis Type="Italic">gem</Emphasis>-dibromospiropentanes

A series of new substituted gem-dibromospiropentanes was studied in a reaction with methyllithium at ?55...?50°C. This reaction is a carbenoid rearrangement that leads to the formation of monomeric and dimeric bromocyclobutenes and also to the products of cyclobutylidene insertion into a C-H bond of the solvent depending on the character of substituents in the dibromospiropentane fragment.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

CO<Subscript>2</Subscript> Biofixation and Growth Kinetics of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Nannochloropsis gaditana</Emphasis>

CO₂ biofixation was investigated using tubular bioreactors (15 and 1.5 l) either in the presence of green algae Chlorella vulgaris or Nannochloropsis gaditana. The cultivation was carried out in the following conditions: temperature of 25 °C, inlet-CO₂ of 4 and 8 vol%, and artificial light enhancing photosynthesis. Higher biofixation were observed in 8 vol% CO₂ concentration for both microalgae cultures than in 4 vol%. Characteristic process parameters such as productivity, CO₂ fixation, and kinetic rate coefficient were determined and discussed. Simplified and advanced methods for determination of CO₂ fixation were compared. In a simplified method, it is assumed that 1 kg of produced biomass equals 1.88 kg recycled CO₂. Advance method is based on empirical results of the present study (formula with carbon content in biomass). It was observed that application of the simplified method can generate large errors, especially if the biomass contains a relatively low amount of carbon. N. gaditana is the recommended species for CO₂ removal due to a high biofixation rate—more than 1.7 g/l/day. On day 10 of cultivation, the cell concentration was more than 1.7?×?10⁷ cells/ml. In the case of C. vulgaris, the maximal biofixation rate and cell concentration did not exceed 1.4 g/l/day and 1.3?×?10⁷ cells/ml, respectively.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Kinetics of Na|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> and Li|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> systems

Properties of CF _x /Li and CF _x /Na cells were examined while using galvanostatic charging/discharging, electrochemical impedance spectroscopy and scanning electron microscopy (SEM). The capacity during the first cycle was as high as ca. 1000 mAh g^?1. Such an electrode is suitable for primary CF _x /Li and CF _x /Na batteries. SEM images of CF _x cathode showed that during discharging it was transformed into amorphous carbon and LiF or NaF crystals (of diameter of ca. 5–20 μm). These systems (C?+?LiF or C?+?NaF) cannot be reversibly converted back into CF _x /Li or CF _x /Na, respectively. Exchange current densities are between 10^?7 Acm^?2 and 10^?9 Acm^?2 when working with LiPF₆ and NaPF₆ electrolytes (1.12?×?10^?7 Acm^?2 and 6.82?×?10^?9 Acm^?2, respectively). Those values are low and indicate that the charge transfer process may be the rate-determining step. Activation energies for the charge transfer process were 57 and 72 kJ mol^?1 for CF _x /LiPF₆ and CF _x /NaPF₆ systems, respectively. Higher activation energy barrier for the CF/Na⁺?+?e^??→?C?+?NaF reaction results in lower observed exchange current density in comparison to the system with lithium ions.     

Neutron diffraction study of dehydrogenation of titanium carbohydrides TiC<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>H<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>

The possibility of the synthesis of hydrogen-nonstoichiometric cubic titanium carbide ТiС _х of high purity from powdery nonstoichiometric cubic titanium carbohydride ТiС _х H _y or nonstoichiometric titanium carbide with admixture hydrogen by annealing in a continuously maintained vacuum of no worse than 1.33 × 10^–3 Pa at temperatures of 600–750°C for several hours has been shown. Similar annealing at higher temperatures (T ≥ 800°C) does not lead to the complete removal of hydrogen from a sample due to intensive sintering. In this case, it seems that pores between sintered particles are hydrogen traps, and the release of hydrogen through the surface of sintered particles is hindered.     

Polystyrene nanorod formation in <Emphasis Type="Italic">C</Emphasis><Subscript>12</Subscript><Emphasis Type="Italic">E</Emphasis><Subscript>5</Subscript> hemimicelle thin film templates

This paper reports the synthesis and characterization of polystyrene nanorods in hemicylindrical hemimicelles of a nonionic polyoxyethylene surfactant, C ₁₂ E ₅, on graphite. The surface structure is characterized by atomic force microscopy (AFM), Fourier transform infrared spectroscopy, and contact angle goniometry. Uniformly aligned polystyrene nanorods are captured by AFM. The nanorod dimensions are studied as a function of the reaction time and styrene monomer concentration. The template synthesis using self-assembled surfactant surface aggregates promises to create functional and stable nanostructures for optoelectronics and surface engineering.     

New routes to the preparation of <Emphasis Type="Italic">gem</Emphasis>-cyclopentenedicarboxylic acid derivatives

A new route was developed to design esters of gem-dicarboxylic acids of cyclopentene series by CH alkylation of diethyl malonate with cis-1,4-dichlorobutene. Diethyl cyclopent-3-ene-1,1-dicarboxylate was reacted with dichlorocarbene. The structures of the isolated compounds were described in detail by ¹H, ¹³C NMR spectroscopy and GC–MS.     

Compositions and structures of nanoparticles of trigonal symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>3<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

A method has been developed for the determination of the structure and number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group. The formulas for calculation of the number of particles of symmetry D _3d have been reported. It has been shown that the number of atoms in trigonal shells is determined by three structurally invariant numbers and the quantum number of the group order n. All possible nanostructures of symmetry D _3d have been classified: C_{θ + 6z} , z = 0, 1, 2, ..., where the basic shells are C_θ = C₆, C₈, and C₁₄. A sum rule has been obtained for the coordination numbers of the shell sites located on symmetry axes. Trigonal nanoparticles are parent ones for obtaining (3,0), (6,0), and (9,0) nanotubes of trigonal type. The general formulas of these nanotubes with icosahedral, dodecahedral, and cubic caps are N_{8 + 12p} , N_{20 + 24p} , and N_{60 + 36p} (p = 1, 2, ...), respectively. The graphical constructions of all classes of trigonal nanoparticles and nanotubes are reported.