Thermal radiation effect on mixed convection from horizontal surfaces in saturated porous media

An analysis is presented to investigate the effect of radiation on mixed convection from a horizontal flat plate in a saturated porous medium. Both a hot surface facing upward and a cold surface facing downward are considered in the analysis. The conservation equations that govern the problem are reduced to a system of nonlinear ordinary different equations. The important parameters of this problem are the radiation parameter R, the buoyancy parameter B, and the freestream to wall temperature ratio T _∞/T _w for the case of a hot surface or the wall to freestream to wall temperature T _w /T _∞ for the case of a cold surface.     

Transient free convection flow between long vertical parallel plates with ramped wall temperature at one boundary in the presence of thermal radiation and constant mass diffusion

The unsteady laminar free convection flow between two long vertical parallel plates with ramped wall temperature at one boundary has been investigated in the presence of thermal radiation and chemical species concentration. The exact solutions of the momentum, energy and concentration equations have been obtained using the Laplace transform technique. The velocity and temperature profiles, skin-friction and Nusselt number variations are shown graphically and the numerical values of the volume flow rate, the total heat rate and species rate added to the fluid are presented in a table. The influence of different system parameters such as the radiation parameter (R), buoyancy ratio parameter (N), Schmidt number (Sc) and time (t) has been analyzed carefully. A critical analysis of the coupled heat and mass transfer phenomena is provided. The free convective flow due to ramped wall temperature has also been compared with the baseline case of flow due to constant wall temperature.     

Turbulent film boiling from a vertical non-isothermal surface

The turbulent film boiling from a vertical non-isothermal surface is formulated with due consideration to thermal radiation from its lateral face. It is observed that the application of Reynolds analogy together with thermal conduction in the test surface has yielded a conjugate solution from which the case of an isothermal condition can be generated as a special case. The analysis has further paved the way in establishing a functional relation between the Nusselt numberNu, radiation parameterN _R , fin parameterM, temperature ratio termT _s /(T _w,0?T _s ), and a product of characteristic modified Grashof, Prandtl and superheating parameter defined as (Gr ² Pr S). In a fully developed turbulent film boiling i.e., modified Grashof number being greater than 10¹⁰, the temperature ratio term accounts for the non-linearities arising due to the inclusion of radiation from the lateral face of the fin. The results are in good agreement with experimental data over a wide range of system conditions.     

Toughness in obliquely-stressed fibrous composites

An earlier treatment of toughness for continuous, uniform, fibre reinforced materials given by M.R. Piggott (1970) is extended to the case where the stress is not parallel to the fibres. Experiments on pairs of fibres crossing cracks obliquely are used to reveal the effect on fibre strength of fibre flexure at the crack. The theory indicates that, so long as splitting parallel to the fibres does not occur, the fracture surface energy γ_φ for a material stressed at an angle φ to the fibres is given with sufficient accuracy for brittle fibres by the approximate formula γ_φ = γ_o(1?2.4A tan φ), where γ_o is the surface energy for fracture normal to the fibre direction, and A is a non-dimensional parameter depending on the force exerted by the matrix on the fibres, and involving, in particular, the ratio of matrix flow stress to the fibre ultimate tensile strength. For ductile fibres, the work of fracture increases with the angle φ at a rate depending on fibre breaking stress. The form of fracture surface and the onset of splitting are also discussed.     

Computational study of combined effects of conduction-radiation and hydromagnetics on natural convection flow past magnetized permeable plate

The computational study of the combined effects of radiation and hydromagnetics on the natural convection flow of a viscous,incompressible,and electrically conducting fluid past a magnetized permeable vertical plate is presented.The governing non-similar equations are numerically solved by using a finite difference method for all values of the suction parameter ξ and the asymptotic solution for small and large values of ξ.The effects of varying the Prandtl number P r,the magnetic Prandtl number P r m,the magnetic force parameter S,the radiation parameter R d,and the surface temperature θ w on the coefficients of the skin friction,the rate of heat transfer,and the current density are shown graphically and in tables.An attempt is made to examine the effects of the above mentioned physical parameters on the velocity profile,the temperature distribution,and the transverse component of the magnetic field.     

Natural convection-radiation interaction on boundary layer flow along a thin vertical cylinder

A free convertion flow of an optically dense viscous incompressible fluid along a vertical thin circular cylinder has been studied with effect of radiation when the surface temperature is uniform. With appropriate transformations, the boundary layer equations governing the flow are reduced to local nonsimilarity equations. Solutions of the governing equations are obtained employing the implicit finite difference methods together with Keller box scheme as well the local nonsimilarity method with second order truncation for all ξ (nondimensional transverse curvature parameter) in the interval [0,10] and are expressed in terms of local Nusselt number for a range of values of the pertinent parameters. Effects of pertinent parameters, such as, the radiation parameter, R _d , the surface temperature parameter, θ _w , taking Prandtl number, Pr, equals 0.7 on the velocity and temperature field are also presented graphically. From the solution it is seen that increase of R _d , or θ _w leads to increase in the local rate of heat transfer coefficients. Results obtained by both the methods are obtained in excellent agreement between each other upto ξ = 10.     

Combined radiation and convection heat transfer in simultaneously developing flow in ducts with semi-circular and right triangular cross sections

In this paper, the interaction of radiation and forced convection in simultaneously developing laminar flow through semicircular and right triangular ducts with isothermal non-black wall is investigated. The three dimensional momentum and energy equations are discretized by the method of lines and solved numerically by the marching method. The method of momentum is employed to consider the radiation contribution which models the radiation in the partial differential equation, instead of the partial integrodifferential equation. The effects of three major parameters, radiation-conduction parameter,N, optical thickness, τ _b , and wall emissivity, ε _w , in the entry region of these irregular geometry ducts are discussed. The numerical results in terms of the variation of the bulk temperature and the mean Nusselt number indicate that the thermal radiation not only enhances the heat transfer rate, but also changes the characteristics of the convective heat transfer. Furthermore, the results compare very well with the available data published in the open literature for the pure convective case.     

Two-dimensional radiation MHD modeling assessment of designs for argon gas puff distributions for future experiments on the refurbished Z machine

Argon Z-pinch experiments are to be performed on the refurbished Z machine (which we will refer to as ZR here in order to distinguish between pre-refurbishment Z) at Sandia National Laboratories with a new 8 cm diameter double-annulus gas puff nozzle constructed by Alameda Applied Sciences Corporation (AASC). The gas exits the nozzle from an outer and inner annulus and a central jet. The amount of gas present in each region can be varied. Here a two-dimensional radiation MHD (2DRMHD) model, MACH2-TCRE, with tabular collisional radiative equilibrium atomic kinetics is used to theoretically investigate stability and K-shell emission properties of several measured (interferometry) initial gas distributions emanating from this new nozzle. Of particular interest is to facilitate that the distributions employed in future experiments have stability and K-shell emission properties that are at least as good as the Titan nozzle generated distribution that was successfully fielded in earlier experiments on the Z machine before it underwent refurbishment. The model incorporates a self-consistent calculation for non-local thermodynamic equilibrium kinetics and ray-trace based radiation transport. This level of detail is necessary in order to model opacity effects, non-local radiation effects, and the high temperature state of K-shell emitting Z-pinch loads. Comparisons of radiation properties and stability of measured AASC gas profiles are made with that of the distribution used in the pre-refurbished Z experiments. Based on these comparisons, an optimal K-shell emission producing initial gas distribution is determined from among the AASC nozzle measured distributions and predictions are made for K-shell yields attainable from future ZR experiments.     

Laminar film boiling on a vertical fin

Laminar film boiling on a vertical fin is formulated as a conjugate phenomenon and investigated for no slip and zero shear conditions at the vapor-liquid interface. The results indicate that the combined effects of thermal leakage at the ends of the fin and radiation from its lateral face have profound influence on the average Nusselt number. Further, from the formulation it can be shown that the isothermal condition can be deduced by suitably changing the boundary conditions of the fin at its extremities. The results of the investigation are rendered into dimensionless functional relationships between the average Nusselt numberNu _m, fin parameterM, radiation parameterN _R and temperature ratio term Ψ. The proposed equation can be made use of in design calculations.     

Investigation of the influence of inner-shell photoionization and photoexcitation on the Heα spectrum in photoionized plasmas

The present paper investigates the influence of inner shell photoionization and photoexcitation on the He_α, i.e., the 1s² to 1s2p transition in He-like ions, and the associated satellite spectra in photoionized plasmas. A comparison of the importance of these processes is made relative to other atomic processes as a function of the electron temperature and irradiation conditions. For the formation of the He_α and the satellite spectra, the K-shell photoionization is found to have significant contribution under low radiation temperature and/or intensity, when lithium- and beryllium-like ions have high abundance, but highly ionized H-like ions are rare.     

Compressive strength of fibre composites with random fibre waviness

The compressive strength of unidirectional long fibre composites is predicted for plastic microbuckling from a random two-dimensional distribution of fibre waviness. The effect of the physical size of waviness is addressed by using couple stress theory, with the fibre bending resistance scaling with the fibre diameter d. The predicted statistical distribution of compressive strength is found using a Monte Carlo method. An ensemble of fibre waviness profiles is generated from an assumed spectral density of waviness and the compressive strength for each such realisation is calculated directly by the finite element method. The average predicted strength agrees reasonably with practical values, confirming the hypothesis that microbuckles can be initiated by fibre misalignment. It is found that the probability distribution of strength is well matched by a Weibull fit, and the dependence of the Weibull parameters upon the spectral density of waviness is determined. For the practical range of fibre distributions considered, it is concluded that the strength depends mainly upon the root mean square amplitude of fibre misalignment, with the shape of the power spectral density function playing only a minor role. An engineering model for predicting the compressive strength is proposed, akin to weakest link theory for materials containing flaws. A specimen containing randomly distributed waviness is examined to locate regions of high-fibre misalignment. The strength of each of these weak regions is estimated from a look-up table derived from calculations with idealised circular or elliptical patches of waviness. The strength of the composite is given by the failure stress associated with the weakest such patch. For random distributions of waviness, the predictions using this engineering approach are in good agreement with the direct calculations of strength using the finite element method.     

Finite deformations of fibre-reinforced elastic solids with fibre bending stiffness

In the conventional theory of finite deformations of fibre-reinforced elastic solids it is assumed that the strain-energy is an isotropic invariant function of the deformation and a unit vector A that defines the fibre direction and is convected with the material. This leads to a constitutive equation that involves no natural length. To incorporate fibre bending stiffness into a continuum theory, we make the more general assumption that the strain-energy depends on deformation, fibre direction, and the gradients of the fibre direction in the deformed configuration. The resulting extended theory requires, in general, a non-symmetric stress and the couple-stress. The constitutive equations for stress and couple-stress are formulated in a general way, and specialized to the case in which dependence on the fibre direction gradients is restricted to dependence on their directional derivatives in the fibre direction. This is further specialized to the case of plane strain, and finite pure bending of a thick plate is solved as an example. We also formulate and develop the linearized theory in which the stress and couple-stress are linear functions of the first and second spacial derivatives of the displacement. In this case for the symmetric part of the stress we recover the standard equations of transversely isotropic linear elasticity, with five elastic moduli, and find that, in the most general case, a further seven moduli are required to characterize the couple-stress.     

加热压电纤维复合材料圆板的横向自由振动

基于经典薄板理论和极正交各向异性材料的本构理论,建立了加热压电纤维复合材料圆板的线性振动控制微分方程。采用打靶法分别获得了加热压电纤维复合材料圆板在周边固支和简支情况下,无量纲固有频率随温度和电场强度变化的关系曲线,并分析了压电纤维体积分数、刚度参数、电场强度和温度变化对压电纤维复合材料圆板无量纲固有频率的影响。结果表明,一定体积分数或者电场强度下,压电纤维复合材料圆板的无量纲固有频率都随温度的升高而单调下降;同一温度下,刚度参数越小,无量纲固有频率越低;电场强度越大,无量纲固有频率越高。     

Radiation effect on Darcy free convection flow along an inclined surface placed in porous media

The paper investigates the effect of radiation on Darcy's buoyancy induced flow of an optically dense viscous incompressible fluid along a heated inclined flat surface maintained at uniform temperature placed in a saturated porous medium with Rosseland diffusion approximation employing the implicit finite difference method together with Keller box elimination technique. Both the streamwise and normal components of the buoyancy force are retained in the momentum equations. The numerical results show that as the buoyancy parameter, ξ, increases the local Nusselt number increases. The results for the locally nonsimilar solutions are compared with the locally similar solutions for small angle of inclination and approximate similar solutions along vertical surface. The effect of the conduction-radiation parameter, R _d , and the surface temperature excess ration, θ _w , on the local Nusselt number, the tangential velocity distribution and the temperature distribution are also shown graphically.     

Radiation effects on Marangoni convection boundary layer over a permeable surface

The problem of Marangoni convection boundary layer flow that can be formed along the interface of two immiscible fluids when the wall is permeable, where there is suction or injection effect, is considered. Similarity equations are obtained through the application of similarity transformation techniques. The effects of suction/injection and radiation parameters on the heat transfer characteristics are numerically studied using the shooting method for a fixed value of the Prandtl number (Pr=0.7). Numerical results are obtained for the surface temperature gradient or the heat transfer rate as well as the temperature profiles for some values of the governing parameters. Comparisons with known results from the open literature show very good agreements. The results indicate that the heat transfer rate at the surface decreases as the radiation parameter increases. Further, results show that multiple (dual) solutions exist for a certain range of the governing parameters.     

Natural convection over a vertical flat plate due to absorption of thermal radiation

Heat transfer by simultaneous free convection and radiation in a participating fluid has received some attention during the past few years. However most of the previous work has been focussed on gases. The present work investigates the problem of combined radiation and natural convection in liquids. Analysis are given for an optically thick cold fluid layer adjacent to a non-emitting and non-reflecting radiation-transmitting plate. The external surface of the plate is subjected to heat loss to surroundings. The governing differential equations are transformed to a dimensionless form where the solution becomes dependent on the following parameters: the plate absorpitivity,α _p; the dimensionless distance along the plate,ζ; the fluid Prandtl number,Pr; and dimensionless heat loss coefficient to surrounding,N _c. A local non-similar technique is adopted to obtain solutions atPr=6.5 and at a wide range ofα _p,ζ, andN _c. The results showed that both velocity and temperature are non-similar and they are greatly affected by the value ofα _p whenζ is small. At large values of f the effect ofα _p diminishes and for a plate without heat loss the velocity becomes similar, i.e. independent of C The heat loss from the external surface of the plate causes the maximum temperature of the fluid to depart far from the plate. The results also showed that for plates without heat loss the local heat transfer coefficient from the plate depends on the local Grashof number to the power 0.185.     

Crack growth resistance curves in strain-softening materials

A theoretical model has been developed for the crack growth resistance (K_R) curves in strain-softening materials with power law softening stress (σ)-crack opening displacement (δ) relationships. Both exact and approximate solution methods have been used to calculate K_R curves for a fibre cement composite in a double-cantilever-beam (DCB) geometry. There is good agreement between these two solutions. When the crack growth is normalized with respect to the saturated softening (or fibre bridging) zone there is an almost unique K_R curve which is independent of specimen geometry and initial crack length. The effects of the softening index (n) of the power law σ-δ relationship on the shapes, saturated softening zone lengths and plateau values of the K_Rcurves are also studied.     

纤维增强合成闸片摩擦磨损特性的试验研究

采用MM-1000型摩擦磨损试验机进行了纤维增强合成闸片和HZ408合成闸片与H300制动韫材料配副的制动摩擦试验,记录了制动过程中摩擦系数、磨损量与制动盘温度的变化情况,采用三维激光共焦扫描显微镜（CLSM）分析了磨损表面形貌．结果表明：制动初速度对纤维增强合成闸片的平均摩擦系数影响小于HZ408合成闸片,在高速制动工况下,纤维增强合成闸片的平均摩擦系数大于HZ408,耐磨性略低于HZ408合成闸片;在低速制动工况下,纤维增强合成闸片和HZ408合成闸片所引起的制动盘温升大致相同;在高速制动工况下前者引起的制动盘温升略高．     

Oblique stagnation-point flow of an incompressible visco-elastic fluid towards a stretching surface

An analysis is made of the steady two-dimensional stagnation-point flow of an incompressible viscoelastic fluid over a flat deformable surface when the surface is stretched in its own plane with a velocity cx, where x is the distance from the stagnation-point and c is a positive constant. It is shown that for a viscoelastic fluid of short memory (obeying Walters’ B model), a boundary layer is formed when the stretching velocity of the surface is less than ax, where ax+2by is the inviscid free-stream velocity and y is the distance normal to the plate, a and b being constants and the velocity at a point increases with increase in the elasticity of the fluid. On the other hand an inverted boundary layer is formed when the surface stretching velocity exceeds ax and the velocity decreases with increase in the elasticity of the fluid. A novel result of the analysis is that the flow near the stretching surface is that corresponding to an inviscid stagnation-point flow when a=c. Temperature distribution in the boundary layer is found in three cases, namely: (i) the sheet with constant surface temperature (CST); (ii) the sheet with variable surface temperature (VST) and (iii) the sheet with prescribed quadratic power law surface heat flux (PHF) for various values of non-dimensional parameters. It is found that in all the three cases when a/c>1, temperature at a point decreases with increase in the elasticity of the fluid and when a/c<1, temperature at a point increases with increase in the elasticity of the fluid. Further temperature at a point decreases with increase in the radiation parameter and wall temperature parameter.