Dielectric dispersion in PbO-Sb2O3-As2O3:V2O5 glasses

Dielectric properties, viz. dielectric constant ε′, loss tan δ and a.c conductivity σ_ac (over a wide range of frequency and temperature) and dielectric breakdown strength of PbO-Sb₂O₃-As₂O₃ glasses doped with V₂O₅ (ranging from 0 to 0.5 mol%) are studied. Analysis of these results, based on optical absorption and ESR spectra, indicates that the insulating strength of the glasses is comparatively high when the concentration of V₂O₅ is about 0.3 mol% in the glass matrix.     

Electrical characteristics and low-temperature sintering of BiFeO3-modified Pb(Zr,Ti)O3–Pb(Fe2/3W1/3)O3–Pb(Mn1/3Nb2/3)O3 ceramics with ZnO addition

Effects of ZnO addition on electrical properties and low-temperature sintering of BiFeO₃-modified Pb(Zr,Ti)O₃–Pb(Fe_2/3W_1/3)O₃–Pb(Mn_1/3Nb_2/3)O₃ were investigated. The investigations revealed that the sintering temperature can be decreased to 950 °C, and the favorable properties were obtained with 0.10 wt% ZnO added ceramics. The electrical properties were as follows: d₃₃ = 313 pC/N, K_p = 0.56, tan δ = 0.0053, ε_r = 1407 and T_c = 295 °C, which showed that this system was a promising material for the multilayer devices application.     

Structural, optical and thermal investigations on Dy doped NaF–Li2O–B2O3 glasses

Structural, optical and thermal properties of Dy³⁺ doped lithium fluoroborate glasses have been studied for various concentrations of Dy³⁺ from 0.5 to 5 wt%. The XRD studies confirm the amorphous nature of the glasses while the FTIR spectra reveal the presence of BO₃ and BO₄ local structural units. The UV–VIS–NIR absorption studies were carried out to calculate the bonding parameters ( and δ), to identify the ionic/covalent nature of the glasses. The JO parameters, experimental and theoretical oscillator strengths were also determined and reported. The luminescence spectra have been studied to determine the radiative transition probability (A), stimulated emission cross section () and the experimental and calculated branching ratios (β_R) for the excited levels that include ⁴F_9/2→⁶H_11/2, ⁶H_13/2, and ⁶H_15/2 transitions. The variation of optical properties with varying concentrations of dysprosium oxide content in the glasses are reported and discussed. The thermal behavior of Dy³⁺ doped lithium fluoroborate glasses have been reported by recording DSC thermograms.     

Optical absorption and thermoluminescence studies on LiF-Sb2O3-B2O3 glasses doped with Ni ions

20LiF-(30−x)Sb₂O₃-50B₂O₃:xNiO glasses with the value of x (ranging from 0 to 1.0 mol% in steps of 0.2) were prepared. A number of studies, viz. differential scanning calorimetry, optical absorption, magnetic susceptibility and thermoluminescence, on these glasses were carried out as a function of nickel ion concentration. An anomaly has been observed in all the properties of these glasses when NiO concentration is about 0.6 mol%. The results of these studies were analysed in the light of different environments of nickel ions in the glass network.     

Effect of Bi2O3 content on physical and optical properties of 15Li2O-15K2O-xBi2O3-(65−x) B2O3: 5V2O5 glass system

Multi-component bismuth borate glasses doped with vanadium ions 15Li₂O-15K₂O-xBi₂O₃-(65−x) B₂O₃: 5V₂O_5, (x=3, 5, 7, 10, 12 and 15) have been prepared using conventional melt quench technique. Characterization of the prepared glasses has been done using X-ray diffraction, differential scanning calorimetry and density measurements. The effect of Bi₂O₃ content on the optical properties of the present glass system is studied from the optical absorption spectra recorded in the wavelength range 200-800 nm. The fundamental absorption edge has been identified from the optical absorption spectra. The values of optical band gap for indirect allowed transitions have been determined using available theories. The origin of the Urbach energy is associated with the phonon-assisted indirect transitions. The density and molar volume studies indicate that Bi₂O₃ in these glasses is acting partly as network modifier and partly as network former. The variations in the optical band gap energies, density and molar volume with Bi₂O₃ content have been discussed in terms of changes in the glass structure. Values of the theoretical optical basicity, average crosslink density and the average electronic polarizability are also reported.     

Effect of BiFeO3 addition on Bi2O3–ZnO–Nb2O5 based ceramics

In this paper, low temperature sintering of the Bi₂(Zn_1/3Nb_2/3)₂O₇ (β-BZN) dielectric ceramics was studied with the use of BiFeO₃ as a sintering aid. The effects of BiFeO₃ contents and the sintering temperature on the phase structure, density and dielectric properties were investigated. The results showed that the sintering temperature could be decreased and the dielectric properties could be retained by the addition of BiFeO₃. The structure of BiFeO₃ doped β-BZN was still the monoclinic pyrochlore phase. The sintering temperature of BiFeO₃ doped β-BZN ceramics was reduced from 1000 °C to 920 °C. In the case of 0.15 wt.% BiFeO₃ addition, the β-BZN ceramics sintered at 920 °C exhibited good dielectric properties, which were listed as follows: ε_r = 79 and tan δ = 0.00086 at a frequency of 1 MHz. The obtained properties make this composition to be a good candidate for the LTCC application.     

Structural and magnetic studies of Fe2O3/SiO2 granular nanocomposites

Fe₂O₃/SiO₂ nanocomposites were synthesized by mechanical alloying, using Fe and SiO₂ powders as precursors. After 340 h milling, the sample essentially consists of hematite and amorphous silica. TEM images show hematite particles embedded in and surrounded by an amorphous silica matrix. A broad size distribution—5–50 nm—of hematite particles is found, and other group of very small—2–3 nm—unidentified particles are observed. Room temperature Mössbauer spectra show a paramagnetic doublet, which may correspond to a non-crystalline phase in the sample (probably the small unidentified particles), and a sextet corresponding to hematite. Magnetic properties were investigated by measuring hysteresis curves at different temperatures (5–300 K) and by zero-field-cooled (ZFC) and field-cooled (FC) magnetization curves (10 mT). The hysteresis loops were well fitted by a ferromagnetic contribution. No evidence of Morin transition is found down to 5 K.     

Preparation of α-Fe2O3 nanoparticles by high-energy ball milling

α-Fe₂O₃ nanoparticles were prepared by high-energy ball milling using α-FeOOH as raw materials. The prepared samples were characterized by transmission electron microscopy (TEM), Mössbauer spectroscopy, X-ray diffraction (XRD) and differential thermal analysis–thermogravimetric analysis (DTA–TGA). The results showed that after 90 h milling α-Fe₂O₃ nanoparticles were obtained, and the particle size is about 20 nm. The mechanism of reaction during milling is supposed that the initial α-FeOOH powder turned smaller and smaller by the high-speed collision during ball milling, later these particles turned to be superparamagnetic, at last these superparamagnetic α-FeOOH particles were dehydrated and transformed into α-Fe₂O₃.     

Lithium ion conductive glass–ceramics with Li3Fe2(PO4)3 and YAG laser-induced local crystallization in lithium iron phosphate glasses

The glasses with the composition of 37.5Li₂O–(25 − x)Fe₂O₃–xNb₂O₅–37.5P₂O₅ (mol%) (x = 5,10,15) are prepared, and it is found that the addition of Nb₂O₅ is effective for the glass formation in the lithium iron phosphate system. The glass–ceramics consisting of Nasicon-type Li₃Fe₂(PO₄)₃ crystals with an orthorhombic structure are developed through conventional crystallization in an electric furnace, showing electrical conductivities of 3 × 10^− 6 Scm^− 1 at room temperature and the activation energies of 0.48 eV (x = 5) and 0.51 eV (x = 10) for Li⁺ ion conduction in the temperature range of 30–200 °C. A continuous wave Nd:YAG laser (wavelength: 1064 nm) with powers of 0.14–0.30 W and a scanning speed of 10 μm/s is irradiated onto the surface of the glasses, and the formation of Li₃Fe₂(PO₄)₃ crystals is confirmed from XRD analyses and micro-Raman scattering spectra. The crystallization of the precursor glasses is considered as new route for the fabrication of Li₃Fe₂(PO₄)₃ crystals being candidates for use as electrolyte materials in lithium ion secondary batteries.     

Nickel ion—A structural probe in BaO-Al2O3-P2O5 glass system by means of dielectric, spectroscopic and magnetic studies

BaO-Al₂O₃-P₂O₅ glasses containing different concentrations of NiO (ranging from 0 to 1.0 mol%) were prepared. A number of studies viz., chemical durability, differential thermal analysis, spectroscopic (infrared, optical absorption spectra), magnetic susceptibility and dielectric properties (constant ε′, loss tan δ, AC conductivity σ_AC over a range of frequency and temperature) of these glasses have been carried out. The studies on chemical durability indicate that there is a significant increase in the corrosion resistance of the glasses; where as the results of differential thermal analysis suggests that there is a substantial improvement in the glass forming ability, with increase in the concentration of NiO up to 0.6 mol% in the glass matrix. The optical absorption, magnetic susceptibility and IR spectral studies point out nickel ions occupy both tetrahedral and octahedral positions in the glass network; the later positions seems to be dominant when the concentration of NiO is beyond 0.6 mol% in the glass matrix. The studies of dielectric properties reveal that the presence of nickel oxide in the glass network causes a considerable improvement in the insulating strength of the se glasses when the concentration of NiO?0.6 mol%.     

Molecular dynamics simulation comparison of atomic scale intermixing at the amorphous Al2O3/semiconductor interface for a-Al2O3/Ge, a-Al2O3/InGaAs, and a-Al2O3/InAlAs/InGaAs

The structural properties of a-Al₂O₃/Ge, a-Al₂O₃/In_0.5Ga_0.5As and a-Al₂O₃/In_0.5Al_0.5As/InGaAs interfaces were investigated by density-functional theory (DFT) molecular dynamics (MD) simulations. Realistic a-Al₂O₃ samples were generated using a hybrid classical-DFT MD “melt and quench” approach. The interfaces were formed by annealing at 700 K/800 K and 1100 K with subsequent cooling and relaxation. The a-Al₂O₃/Ge interface demonstrates pronounced interface intermixing and interface bonding exclusively through Al–O–Ge bonds generating high interface polarity. In contrast, the a-Al₂O₃/InGaAs interface has no intermixing, Al–As and O–In/Ga bonding, low interface polarity due to nearly compensating interface dipoles, and low substrate deformation. The a-Al₂O₃/InAlAs interface demonstrated mild intermixing with some substrate Al atoms being adsorbed into the oxide, mixed Al–As/O and O–Al/In bonding, medium interface polarity, and medium substrate deformation. The simulated results demonstrate strong correlation to experimental measurements and illustrate the role of weak bonding in generating an unpinned interface for metal oxide/semiconductor interfaces.     

Self-assembly of Sb2O3 nanowires into microspheres: Synthesis and characterization

Sb₂O₃ nanowires with diameters of ∼233 nm and microspheres assembled by these nanowires were successfully synthesized by a simple poly-(vinylpyrrolidone) (PVP) assisted hydrothermal method. The morphologies, nano/microstructures and optical properties of the as-grown nanowires and microspheres were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV-vis diffuse reflection spectrum. It has been found that the experimental parameters, such as mineralizers, played crucial roles in the morphological control of Sb₂O₃ nanowires. The possible growth mechanism of microspheres has been proposed.     

The role of As2O3 on the stability and some physical properties of PbO-Sb2O3 glasses

PbO-Sb₂O₃ glasses added with different concentrations of As₂O₃ (10-55 mol%) were prepared to understand their IR spectra, elastic properties (Young's modulus E, Shear modulus G, microhardness H), optical absorption and dielectric properties (constant ε, loss tan δ, ac conductivity σ_ac over a moderately wide range of frequency and temperature and breakdown strength in air medium at room temperature). Results have indicated that the structure of the PbO-Sb₂O₃-As₂O₃ glass is more rigid when the concentration of As₂O₃ is around 40 mol%.     

Fabrication and characterization of β-Ga2O3 optical nanowires

Monoclinic gallium oxide (β-Ga₂O₃) nanowires with lengths of tens of micrometers and diameters ranging from 100 to 250 nm are synthesized using simple physical evaporation based on vapor–liquid–solid (VLS) mechanism. The as-synthesized straight β-Ga₂O₃ nanowires show excellent diameter uniformity and sidewall smoothness, making them suitable for optical wave-guiding. Light from a fiber taper is launched into the nanowire by means of evanescent coupling. Measured propagation loss of the nanowire at 633 nm wavelength is on the order of 10 dB/mm. Favorable mechanical strength of these nanowires for elastic bending is also observed. Our results suggest that β-Ga₂O₃ nanowires are promising building blocks for micro- and nanophotonic circuits and devices.     

Role of WO3 in structural and optical properties of WO3-Al2O3-PbO-B2O3 glasses

Glass samples of composition xAl₂O₃-20PbO-(80−x)B₂O₃ and xWO₃-xAl₂O₃-20PbO-(80−2x)B₂O₃ with x varying from 0% to 10% mole fraction are prepared by melt quench technique. The optical band gap decreases (from 3.21 to 2.37 eV) more for WO₃-Al₂O₃-PbO-B₂O₃ glasses with an addition of WO₃ content. The FTIR spectral studies have pointed out the conversion of structural units of BO₃ to BO₄ and WO₄ to WO₆ in these glasses. The increase in density from 4.51 to 5.80 g cm⁻³ for WO₃-Al₂O₃-PbO-B₂O₃ glasses is observed with an increase in WO₃ content. This is observed that the atomic structure changes more with the incorporation of WO₃. This is due to the formation of WO₆, WO₄ and BO₄ units.     

Spectroscopic features of Pr, Nd, Sm and Er ions in Li2O-MO (Nb2O5, MoO3 and WO3)-B2O3 glass systems

Li₂O-MO (Nb₂O₅, MoO₃ and WO₃)-B₂O₃ glasses doped with four rare earth ions, viz., Pr³⁺, Nd³⁺, Sm³⁺ and Er³⁺ (of 1.0 mol% each) were prepared. The glasses were characterized by X-ray diffraction, differential scanning calorimetry, ESR, optical absorption and photoluminescence spectra. From the measured intensities of various absorption bands of these glasses, the Judd-Ofelt parameters Ω₂, Ω₄ and Ω₆ have been evaluated. The Judd-Ofelt theory could successfully be applied to characterize the absorption and luminescence spectra of these glasses. From this theory, various radiative properties like transition probability A, branching ratio β_r, the radiative life time τ_r and the emission cross-section σ^E for various emission levels of these glasses have been determined and reported. An attempt has also been made to throw some light on the relationship between the structural modifications and luminescence efficiencies of all the three glasses. The analysis of the data indicated high non-radiative losses in Nb₂O₅ mixed glasses.     

Ga2O3组分对Tm3+掺杂GeO2-Ga2O3-Li2O-BaO-La2O3玻璃的光谱性能影响

制备了Tm³⁺(8.0mol%)掺杂(77-x)GeO₂-xGa₂O₃-8Li₂O-10BaO-5La₂O₃(x=4,8,12,16)系列玻璃.系统地研究了Ga₂O₃从4mol%变化到16mol%时,玻璃的光谱性质与热学性质的变化规律.差热分析表明,随着Ga₂O₃含量的增加,锗酸盐玻璃的热稳定性增加.运用Judd-Ofelt(J_O)理论计算得到了Tm³⁺在不同Ga₂O₃含量的GeO₂-Ga₂O₃-Li₂O-BaO-La₂O₃玻璃中的J-O强度参数(Ω₂,Ω₄,Ω₆)及Tm³⁺各激发能级的自发跃迁概率、荧光分支比以及辐射寿命等光谱参量.在808nm激光二极管的激发下,测试并分析了Ga₂O₃对Tm³⁺荧光光谱特性的影响.随着Ga₂O₃从4mol%增加到16mol%,Tm³⁺在1.8μm处的荧光强度呈现先减弱后增强的特性.当Ga₂O₃含量大约在12mol%时,Tm³⁺在1.8μm处的荧光强度最弱,受激发射截面达到最小.还初步讨论了Ga₂O₃对玻璃结构与光谱参数的影响规律. 关键词： 3+掺杂锗酸盐玻璃')" href="#">Tm³⁺掺杂锗酸盐玻璃 光谱性能 Judd-Ofelt参数 热稳定性     

Synthesis and photocatalytic oxidation of different organic dyes by using Mn2O3/TiO2 solid solution and visible light

Mn₂O₃/TiO₂ solid solution was prepared from two different oxides, manganese oxide (from KMnO₄ and ethanol) and TiO₂, these samples were characterized by BET, XRD, EDAX, SEM, FT-IR, ESR, XPS and UV–vis absorption spectroscopy. Photocatalytic activities of Mn₂O₃/TiO₂ powder was investigated by photooxidation of different dyes like Rhodamine B, thymol blue, methyl orange and Bromocresol green under visible light (300-W Xe lamp; λ > 420 nm). The results show that the alloy of TiO₂ with 1 mol% of Mn₂O₃ (MNT1) exhibit photocatalytic activity 3–5 times higher than that of P25 TiO₂ for oxidation of various dyes (RB, TB, MO and BG). The average particle size and crystallite size of MNT1 were found to be 100 nm and 12 nm measured from SEM and XRD, respectively. The EPR spectra of the Mn₂O₃/TiO₂ samples is a sharp five-line Mn(III) component centered on g_eff = 1.99.     

Luminescence enhancement in (Nd+Ce) doped SiO2 : Al2O3 sol–gel glasses

An enhancement in NIR luminescence from Nd³⁺-doped Ce³⁺ co-doped SiO₂+Al₂O₃ sol–gel glasses has been observed. The lasing transition (⁴F_3/2→⁴I_11/2) at 1072 nm from the dual rare-earth Nd³⁺+Ce³⁺-doped glasses has shown an emission strength of about five times that of the single rare-earth ion Nd³⁺-doped glass. From the measurement of lifetimes of the transition at 1072 nm, the transfer rate (W_tr), critical distance (R₀) and energy transfer efficiency (η) of the neodymium glasses have been calculated.     

Large nonlinear optical properties of Fe2O3 nanoparticles

Nonlinear optical properties of Fe₂O₃ nanoparticles were investigated by the signal-beam Z-scan technique with Ar⁺ and Ne–He lasers. The largest reported effective nonlinear coefficient, n₂=−8.07×10⁻⁷ cm²/W, was obtained. It is demonstrated that the nonlinear optical response originals from quantum confinement effect.