等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

银在甲烷选择性催化还原NOx反应中不同催化行为的研究

 采用XRD,TEM和UV－Vis方法研究了Ag－HZSM－5催化剂中活性组分银的价态和结构变化,并将这种变化与其在CH4选择性催化还原NOx反应中的活性和选择性相关联．结果表明,惰性气氛下高温处理使交换到分子筛阳离子位上的Ag＋自还原为Ag0,并在热的作用下聚集成纳米尺度的银颗粒Agn．纳米银颗粒Agn的形成提高了银催化剂在CH4选择性催化还原NOx反应中的活性,但它的长大又促进了CH4和O2的直接燃烧,使CH4选择性催化还原NOx反应的选择性降低．氧气气氛下高温预处理抑制了银颗粒的长大,并且氧气的氧化作用使银颗粒带有一定电荷,形成小的荷电纳米银粒子Agy＋x．荷电纳米银粒子的形成使催化剂的活性降低,但提高了CH4选择性催化还原NOx反应的选择性．     

载体性质对Pt催化剂H2选择催化还原NOx活性和选择性的影响

研究了Pt/MgO, Pt/γ-Al2O3, Pt/ZrO2和Pt/HZSM-5催化剂上H2选择催化还原消除NOx(H2-SCR)反应。结果发现, H2-SCR活性和N2生成选择性受催化剂中Pt的金属性以及载体的氮氧化物吸附能力影响很大。 HZSM-5的表面酸性使载体对NOx吸附能力较小,使担载Pt以较高的金属性存在,从而导致Pt/HZSM-5催化剂的高活性和高选择性。相反, Pt/MgO和Pt/γ-Al2O3催化剂较差的活性和选择性可归因于其载体的碱性表面、催化剂中Pt较低的金属性以及载体对氮氧化物较大的吸附能力。结合反应的原位红外光谱结果可以认为,在Pt/载体界面处亚硝酸根/硝酸根物种被还原为N2或N2O,取决于该处参与反应的活性H与这些含氮物种的相对数目。     

Study on methane selective catalytic reduction of NO on Pt/Ce0.67Zr0.33O2 and its application

Monolithic catalysts of Pt/La-Al2O3 and Pt/Ce0.67Zr0.33O2 were prepared to investigate methane selective catalytic reduction (SCR) of NO.The results indicate that Pt/Ce0.67Zr0.33O2 shows high activity and both NO and CH4 can be converted completely at 450 ℃.Meanwhile,NO and CH4 can be converted completely when there exists excess oxygen.The Pt/Ce0.67Zr0.33O2 catalyst were further investigated by using methane as reducing agent to SCR NO in a novel equipment which combined the CH4 selective catalytic reduction of NO with methane combustion.The result shows that the catalyst is high active and the novel equipment is very effective.The conversion of NO is above 92% under the conditions used in this work.The prepared burner and catalysts have great potential for application.     

Sb2O3与HZSM-5的相互作用

研究了氮气气氛下于500℃处理2h后的Sb₂O₃/HZSM-5体系中Sb₂O₃在分子筛表面上的分散行为.发现处理后的体系中Sb₂O₃晶相消失,HZSM-5晶相减少,非晶相增加.经XRD相定量、氮气吸附、正己烷吸附及NH₃-TPD实验可知,高温下酸性Sb₂O₃破坏了分子筛的部分骨架,生成无定形硅铝胶,同时Sb₂O₃高分散在其中.含Sb₂O₃的无定形硅铝胶修饰了分子筛表面,减小了孔口,提高了分子筛在甲苯烷基化反应中的择形性能,对二甲苯的选择性可高达89.     

甲烷无氧脱氢芳构化催化剂Mo/HZSM-5的研究

催化剂Ｍｏ／ＨＺＳＭ－５在甲烷地氧脱氢芳构化反应中表现出很高的活性，用ＸＲＤ，ＢＥＴ经表面，ＮＨ３－ＴＰＤ及ＴＰＲ等手段，对不抽提前后催化剂上的活性ｏ的种进行了研究，ＸＲＤ结果表明，Ｍｏ物种高度分散于筛表面，随着Ｍｏ担载量的提高，ＢＥＴ比表面积有所下降；但氨水抽提后，比表面积有很大程度的恢复，ＮＨ３－ＴＰＤ结果表明，Ｍｏ物种优先占据分子筛中的强酸位。ＴＰＲ结果显示出有ＭｏＯ３晶相存在的催化剂较易被     

等离子体与催化剂协同催化CH4选择性还原脱硝反应

研究了在低温等离子体和催化剂共同作用下,CH4选择催化还原(SCR)NO的反应.在所考察的金属氧化物催化剂中,γ-Al2O3表现出最高的催化活性.当等离子体放电功率为4.5 W,反应温度为300℃时,NO转化率为56.5％;该条件下单纯等离子体反应和以γ-Al2O3为催化剂时NO转化率分别为28.9％和0,表明等离子体...     

Ag-ZSM-5催化剂上CH4选择催化还原NOx的研究

摘要研究Ag-ZSM-5催化剂上CH₄选择性催化还原NO_x的反应性能,采用TPD和TPSR技术研究NO和O₂共吸附于Ag-ZSM-5催化剂表面形成的吸附物种及其和CH₄之间的反应。结果表明,Ag-ZSM-5催化剂上CH₄选择性还原NO_x活性和选择性较高。NO和O₂共吸附在Ag-ZSM-5催化剂上形成的NO₃(s)吸附物种能被CH₄还原生成N₂.在NO₃(s)和O₂共存的体系中,CH₄能优先并选择性还原NO₃(s)生成N₂.     

V2O5-Sb2O3-TiO2催化剂 低温NH3还原NO及其抗H2O和SO2毒化性能

浸渍法制备了催化剂V₂O₅-Sb₂O₃-TiO₂,考察了V₂O₅、Sb₂O₃负载量、pH值和焙烧温度对催化剂V₂O₅- Sb₂O₃-TiO₂低温氨选择性催化还原(SCR)NO活性的影响;同时,考察了催化剂V₂O₅-Sb₂O₃-TiO₂抗H₂O和SO₂毒化性能。结果表明,V₂O₅和Sb₂O₃负载量分别为5%和2%、焙烧温度为400℃、pH值为4时,催化剂SCR活性最好,反应温度220℃时,可达97%。Sb₂O₃的加入不仅能增强V₂O₅/TiO₂的催化活性,而且能明显提高催化剂的抗H₂O和SO₂毒化性能。SO₂、NO吸附暂态反应和TG-DTG测试表明,Sb₂O₃的促进机制主要是促进了催化剂在SO₂存在条件下对NO的吸附,同时,减弱了硫酸铵盐与催化剂之间的相互作用,硫酸铵盐更容易分解。     

HZSM-5沸石分子筛上苯酚与甲醇的烷基化反应

 在n（PhOH）／n（CH3OH）＝1,WGSV＝0．5h－1,T＝673K的反应条件下,研究了HZSM－5,HZSM－23和改性HZSM－5分子筛上苯酚与甲醇烷基化反应的规律．结果表明,分子筛外表面的酸中心对苯酚烷基化反应的贡献较大．用4－甲基喹啉使分子筛外表面的酸中心中毒后,影响反应产物选择性的主要因素是分子筛的孔径．孔径较小的HZSM－23分子筛对提高芳香醚的选择性,抑制二甲酚的生成和提高对甲酚的选择性有利．间甲酚和二甲酚可以在HZSM－5沸石的孔道内生成,但在HZSM－23的孔道内受到抑制．用P2O5,MgO和Sb2O3对HZSM－5改性都可以提高芳香醚的选择性,降低甲酚和二甲酚的选择性．随着氧化物负载量的增加,邻甲酚选择性升高．适度的氧化物改性可以提高对甲酚的选择性,改性效果为Sb2O3＞P2O5＞MgO．