双重分子印迹电化学传感器测定氯霉素的研究

本文旨在构建一种双重分子印迹膜电化学传感器检测痕量氯霉素的分析方法。首先通过量化计算,从N-(4-戊烯酰-氨基酸酰)壳寡糖筛选出对氯霉素分子有较强分子作用的功能单体低聚物N-(4-戊烯酰-异亮氨酰)壳寡糖(N-(4-pentenyl-isoleucyl)chitooligosaccharide, PICO)。经紫外扫描确证这种相互作用。以氯霉素为模板分子、PICO为功能单体低聚物、乙二醇二甲基丙烯酸酯作为交联剂,在玻碳电极表面本体聚合制备了氯霉素初级分子印迹膜,然后以此修饰电极为工作电极,在含饱和氯霉素的吡咯溶液中,在0～0.85 V进行循环伏安扫描,在初级印迹聚合膜的间隙中形成复合印迹膜。去除复合印迹膜中模板分子后,可以实现对氯霉素的特异性吸附。采用微分脉冲伏安法(DPV)对构建传感器的性能评估,并优化了传感器相关的实验制备参数。结果表明：在最佳条件下,传感器对氯霉素的检测范围为0.04～4.0μM,检出限为15 nM(S/N=3),回收率达94.0%～103.4%,相对标准偏差小于5%(n=5)。此外,该传感器具有良好的再生性能、稳定性和实用性,在室温下于密封胶囊中保存10天后,其...     

非诺贝特印迹聚合物的制备与性能研究

以非诺贝特(FNB)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了FNB分子印迹聚合物(MIP)。IR和SEM表征的结果显示:FNB分子印迹聚合物中存在与模板分子相互作用的特征基团,与空白聚合物(NIP)的表面形态显著不同,说明MIP存在与模板分子相互识别的结合位点。采用静态平衡结合方法和Scatchard模型评价了FNB分子印迹聚合物的结合特性和识别机理,并考察了其选择性吸附能力。结果表明,FNB分子印迹聚合物存在能量相异的两类特异性结合位点,对FNB具有高选择吸附特性,饱和吸附量为6.363mg/g。     

酸性染料分子表面印迹材料的设计与制备及其分子识别特性研究

本文使用"接枝交联聚合与印迹过程同步进行"的分子表面印迹方法,以阳离子单体丙烯酰氧乙基三甲基氯化铵(DAC)为功能单体,以活性艳红X-3B(RBR)为模板分子,制备了酸性染料分子表面印迹材料,并考察了印迹材料的分子识别性能。在水溶液中,凭籍强静电相互作用与阳离子-π相互作用,阳离子单体DAC自动地结合在模板RBR分子周围,在氨基/过硫酸盐表面引发体系作用下,DAC及交联剂N,N'-亚甲基双丙烯酰胺(MBA)在硅胶微粒表面发生接枝交联聚合,制得了酸性染料分子表面印迹材料MIP-PDAC/SiO2。该分子表面印迹材料对RBR分子具有高度的识别选择性,相对于结构与RBR相似的活性黄X-RG和活性嫩黄X-6G两种酸性染料,MIP-PDAC/SiO2对RBR的识别选择性系数分别为8.1和8.9。     

基于分子印迹膜的检测牛奶中琥珀酸氯霉素残留传感方法的研究

采用光聚合法在一次性丝网印刷电极上制备琥珀酸氯霉素分子印迹膜,然后将丝网印刷电极通过电极插口与电化学分析装置相连接,组装成检测琥珀酸氯霉素残留的电化学传感仪.使用与传感装置相连接的记录仪记录响应的结果.采用本传感仪建立了检测氯霉素的标准曲线并测试了实际牛奶样品中氯霉素含量.电镜学观察表明,与非印迹膜相比,在印迹膜表面形成大量直径约为100 nm的印迹微孔.本传感仪装置检测琥珀酸氯霉素具有很高的灵敏度和特异性,检出限为2×10-9 mol/L,检测线性范围为1×10-8～1.2×10-5 mol/L,基于牛奶样品的检测回收率介于93.5%～95.5%之间.     

分子印迹复合膜对降糖药的拉曼光谱快速检测

基于分子印迹技术的特异性识别特点, 以假模板盐酸胍和4-(2-氨乙基)苯磺酰胺制备了2种分子印迹复合膜, 用其对保健品中的二甲双胍、 苯乙双胍和格列本脲进行吸附后, 采用拉曼光谱法实现了保健品中降糖药的富集与快速检测. 考察了膜制备过程中纳米银的加入对拉曼光谱的增强作用, 以及吸附样品浓度等的影响. 实验结果表明, 盐酸胍分子印迹复合膜吸附5 mg/mL以上的二甲双胍或苯乙双胍后具有明显的拉曼响应, 4-(2-氨乙基)苯磺酰胺印迹膜吸附10 mg/mL格列本脲后具有明显的拉曼响应. 所建立的分子印迹复合膜结合拉曼光谱检测方法可用于多种实际样品的检测.     

表面引发接枝聚合法制备抗蚜威分子表面印迹材料及其分子识别与结合特性研究

基于表面引发接枝聚合,设计与建立了一种新的分子表面印迹(MIP)方法.先使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面改性,制得改性硅胶AMPS-SiO2;在酸性水溶液体系中,凭借强静电相互作用,阴离子单体对苯乙烯磺酸钠(PSSS)被结合在模板分子抗蚜威周围;改性硅胶AMPS-SiO2表面的氨基与溶液中的过硫酸盐构成氧化还原引发体系,在硅胶微粒表面产生自由基,引发结合在模板分子周围的SSS及交联剂甲基双丙烯酰胺(MBA)在硅胶微粒表面发生接枝交联聚合,从而实现了抗蚜威分子的表面印迹,制得了抗蚜威分子表面印迹材料MIP-PSSS/SiO2.以残杀威为对比物,采用静态与动态两种方法,考察研究了分子表面印迹材料MIP-PSSS/SiO2对抗蚜威的分子识别特性与结合性能.研究结果表明,印迹材料MIP-PSSS/SiO2对抗蚜威分子具有特异的识别选择性与优良的结合亲和性,相对于残杀威分子,MIP-PSSS/SiO2对抗蚜威分子的识别选择性系数为9.373,显示出高的分子识别选择性.     

基于离子液体辅助氯霉素分子印迹聚合物的制备及应用

以氯霉素(CAP)为模板,2-乙烯基吡啶(2-Vp)为功能单体,四氢呋喃和离子液体1-丁基-3-甲基咪唑四氟硼酸盐[BMIm]BF4的混合溶液为反应溶剂,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,合成了氯霉素的分子印迹及非印迹聚合物。优化功能单体、不同溶剂对印迹聚合物吸附性能的影响,结果表明,以2-乙烯基吡啶为功能单体,四氢呋喃和离子液体[BMIm]BF4(体积比1∶1)作为反应溶剂合成的分子印迹聚合物对氯霉素具有高的吸附容量,良好的特异性识别性能。氯霉素分子印迹聚合物的印迹因子为2.6,进行吸附-解吸附循环5次后,氯霉素印迹聚合物的性能稳定,可重复使用。将制备的氯霉素分子印迹聚合物作为富集材料,应用于鸡蛋样品中氯霉素的检测,回收率可达62.3%~81.1%,准确性好。     

白藜芦醇分子印迹复合膜的制备及其选择性能

以反式白藜芦醇为模板分子,聚偏氟乙烯微孔滤膜为支撑膜,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸脂(EDMA)为交联剂,采用热引发原位聚合方法制备了白藜芦醇分子印迹聚合物膜。研究了分子印迹膜对白藜芦醇及其结构类似物(2-萘酚、白藜芦醇甙和双酚A)的结合和透过性,并用扫描电镜对膜形貌进行了表征。结果表明,印迹复合膜对模板分子白藜芦醇具有良好的吸附选择性,印迹膜对白藜芦醇的吸附量远远大于其它结构类似物,其饱和吸附量达1.72μmol/g,为非印迹膜的3倍;尺寸效应和印迹效应是影响物质在印迹膜上的透过量的两个重要因素,尺寸比模板分子小的2-萘酚最先透过,而相对于尺寸接近或大于模板分子的双酚A或白藜芦醇甙,模板分子优先透过。而且,模板分子在印迹膜上的透过量大于非印迹膜。     

1-乙烯基-3-甲基咪唑离子液体/分子印迹材料用于牛血红蛋白的识别

分子印迹聚合物是一类对目标分子具备特异性辨别能力的高分子吸附剂材料.运用本体聚合法,以牛血红蛋白(BHb)为模板分子,丙烯酰胺(AAM)和碘化1-乙烯基-3-甲基咪唑离子液体在交联剂、引发剂和加速剂的作用下进行聚合,制备的分子印迹材料对牛血红蛋白(BHb)具备特异性识别功能.同时,对识别条件进行了优化和讨论.     

聚合有机凝胶印迹膜对D-和L-苯丙氨酸的选择性吸附

以1-甲基-2,4-二(N’-十八烷脲基)苯为凝胶剂,以液体单体丙烯酸-2-乙基己酯、甲基丙烯酸甲酯、二甲基丙烯酸聚乙二醇(200)酯以及模版分子和光敏引发剂的混合物为溶剂,研究表明,这种二烷基脲型凝胶剂在这些单体混合物中可进行超分子自组装,形成互相缠绕的具有纳米尺寸的纤维状聚集体,最终导致这些单体混合物首先形成稳定的超分子有机凝胶。然后经UV光引发聚合,经乙醇抽提凝胶剂聚集体和模板分子,制备了一种新型分子印迹的聚合有机凝胶薄膜。探讨了不同凝胶剂浓度、模板分子浓度、单体混合物配比所制备的印迹聚合有机凝胶薄膜对D-和L-苯丙氨酸吸附效率的影响。结果表明所制备的印迹聚合超分子凝胶对L-苯丙氨酸吸附效率约为对D-苯丙氨酸吸附效率的3～4倍,表现出明显的选择性吸附性。     

替代模板分子印迹技术在样品前处理中的应用

分子印迹聚合物具有抗恶劣环境、选择性高、稳定性好等特点,广泛应用于复杂样品的前处理。采用结构类似物作为替代模板分子,可以解决分子印迹聚合物制备时目标物溶解性差的问题,替代模板分子印迹聚合物不仅对目标分析物具有选择性识别能力,还可以避免模板泄露对痕量分析造成的影响。本文综述了替代模板分子印迹技术在样品前处理中的应用进展,包括替代模板分子印迹技术在固相萃取、固相微萃取、色谱固定相、基质固相分散萃取中的应用,最后对替代模板分子印迹技术在未来的样品前处理中的研究进行了展望。     

Magnetic molecularly imprinted polymers synthesized by surface‐initiated reversible addition‐fragmentation chain transfer polymerization for the enrichment and determination of synthetic estrogens in aqueous solution

Magnetic molecularly imprinted polymers have attracted significant interest because of their multifunctionality of selective recognition of target molecules and rapid magnetic response. In this contribution, magnetic molecularly imprinted polymers were synthesized via surface‐initiated reversible addition addition‐fragmentation chain transfer polymerization using diethylstilbestrol as the template for the enrichment of synthetic estrogens. The uniform imprinted surface layer and the magnetic property of the magnetic molecularly imprinted polymers favored a fast binding kinetics and rapid analysis of target molecules. The static and selective binding experiments demonstrated a desirable adsorption capacity and good selectivity of the magnetic molecularly imprinted polymers in comparison to magnetic non‐molecularly imprinted polymers. Accordingly, a corresponding analytical method was developed in which magnetic molecularly imprinted polymers were employed as magnetic solid‐phase extraction materials for the concentration and determination of four synthetic estrogens (diethylstilbestrol, hexestrol, dienestrol, and bisphenol A) in fish pond water. The recoveries of these synthetic estrogens in spiked fish pond water samples ranged from 61.2 to 99.1% with a relative standard deviation of lower than 6.3%. This study provides a versatile approach to prepare well‐defined magnetic molecularly imprinted polymers sorbents for the analysis of synthetic estrogens in water solution.     

Selective enrichment and separation of phosphotyrosine peptides by thermosensitive molecularly imprinted polymers

Novel thermosensitive molecularly imprinted polymers were successfully prepared using the epitope imprinting approach in the presence of the mimic template phenylphosphonic acid, the functional monomer vinylphosphonic acid‐Ti⁴⁺, the temperature‐sensitive monomer N‐isopropylacrylamide and the crosslinker N,N′‐methylenebisacrylamide. The ratio of the template/thermosensitive monomers/crosslinker was optimized, and when the ratio was 2:2:1, the prepared thermosensitive molecularly imprinted polymers had the highest imprinting factor. The synthetic thermosensitive molecularly imprinted polymers were characterized by Fourier transform infrared spectroscopy to reveal the combination and elution processes of the template. Then, the adsorption capacity and thermosensitivity was measured. When the temperature was 28°C, the imprinting factor was the highest. The selectivity and adsorption capacity of the thermosensitive molecularly imprinted polymers for phosphotyrosine peptides from a mixture of three tailor‐made peptides were measured by high‐performance liquid chromatography. The results showed that the thermosensitive molecularly imprinted polymers have good selectivity for phosphotyrosine peptides. Finally, the imprinted hydrogels were applied to specifically adsorb phosphotyrosine peptides from a sample mixture containing phosphotyrosine and a tryptic digest of β‐casein, which demonstrated high selectivity. After four rebinding cycles, 78.9% adsorption efficiency was still retained.     

Ordered macroporous quercetin molecularly imprinted polymers: Preparation,characterization, and separation performance

Ordered macroporous molecularly imprinted polymers were prepared by a combination of the colloidal crystal templating method and the molecular imprinting technique by using SiO₂ colloidal crystal as the macroporogen, quercetin as the imprinting template, acrylamide as the functional monomer, ethylene glycol dimethacrylate as the cross‐linker and tetrahydrofuran as the solvent. Scanning electron microscopy and Brunauer–Emmett–Teller measurements show that the ordered macroporous molecularly imprinted polymers have a more regular macroporous structure, a narrower pore distribution and a greater porosity compared with the traditional bulk molecularly imprinted polymers. The kinetic and isothermal adsorption behaviors of the polymers were investigated. The results indicate that the ordered macroporous molecularly imprinted polymers have a faster intraparticle mass transfer process and a higher adsorption capacity than the traditional bulk molecularly imprinted polymers. The ordered macroporous molecularly imprinted polymers were further employed as a sorbent for a solid‐phase extraction. The results show that the ordered macroporous molecularly imprinted polymers can effectively separate quercetin from the Gingko hydrolysate.     

Molecularly imprinted polymers with synthetic dummy templates for the preparation of capsaicin and dihydrocapsaicin from chili peppers

In this work, dummy molecularly imprinted polymers with high selectivity and affinity to capsaicin and dihydrocapsaicin are designed using N‐vanillylnonanamide as a dummy template. The performance of dummy molecularly imprinted polymers and nonimprinted polymers was evaluated using adsorption isotherms, adsorption kinetics, and selective recognition capacity. Dummy molecularly imprinted polymers were found to exhibit good site accessibility, taking just 20 min to achieve adsorption equilibrium; they were also highly selective toward capsaicin and dihydrocapsaicin. We successfully used dummy molecularly imprinted polymers as a specific sorbent for selectively enriching capsaicin and dihydrocapsaicin from chili pepper samples. In a scaled‐up experiment, the selective recovery of capsaicinoids was calculated to be 77.8% using solid‐phase extraction. To the best of our knowledge, this is the first example of the use of N‐vanillylnonanamide as a dummy template in molecularly imprinted polymers to simultaneously enrich capsaicin and dihydrocapsaicin.     

核-壳型赤藓红分子印迹聚合物的制备及吸附性能的评价

以氨基化修饰的SiO_2为内核,人工合成色素赤藓红为模板,甲醇/水为溶剂,4-乙烯基吡啶为功能单体,二甲基丙烯酸乙二醇酯为交联剂,偶氮二异丁腈为引发剂,采用表面印迹技术,制备核-壳型赤藓红分子印迹聚合物。通过红外光谱对其结构进行表征,并通过动力学吸附、等温饱和吸附和实际样品加标实验对其吸附性能进行评价。结果表明,核-壳型赤藓红分子印迹聚合物具有较快的吸附能力,在15min左右达到吸附平衡,有较好的吸附容量,能够从复杂的食品样品中选择性吸附模板,且回收可达85%。     

Solvent effects in the preparation of molecularly imprinted polymers for melatonin using N-propionyl-5-methoxytryptamine as the pseudo template

To clarify the role of diluents in the preparation of molecularly imprinted polymers utilizing only hydrogen bonding, we investigated the effects of diluents by using different solvents. Melatonin (N-acetyl-5-methoxytryptamine), an amide bond and indole ring-containing hormone was chosen as the target molecule. N-Propionyl-5-methoxytryptamine was used as the pseudo template, methacrylic acid as the functional monomer, and solvents were used as diluents. Interactions between the template, the functional monomer, melatonin, and the solvents, were observed by ¹H NMR spectroscopy. The polymers were evaluated by high-performance liquid chromatography. The results suggest the hydrogen bonding-acceptor capacity of the solvent is the most important factor in the preparation of molecularly imprinted polymers for hydrogen bonding-donating molecules. Hydrogen bonding between the template, the functional monomer, and solvent can be estimated from the chemical shifts in ¹H NMR spectra of those molecules in the solvent.     

Cost‐effective imprinting combining macromolecular crowding and a dummy template for the fast purification of punicalagin from pomegranate husk extract

The combination of molecular crowding and virtual imprinting was employed to develop a cost‐effective method to prepare molecularly imprinted polymers. By using linear polymer polystyrene as a macromolecular crowding agent, an imprinted polymer recognizable to punicalagin had been successfully synthesized with punicalin as the dummy template. The resulting punicalin‐imprinted polymer presented a remarkable selectivity to punicalagin with an imprinting factor of 3.17 even at extremely low consumption of the template (template/monomer ratio of 1:782). In contrast, the imprinted polymer synthesized without crowding agent, did not show any imprinting effect at so low template amount. The imprinted polymers made by combination of molecular crowding and virtual imprinting can be utilized for the fast separation of punicalagin from pomegranate husk extract after optimizing the protocol of solid‐phase extraction with the recovery of 85.3 ± 1.2%.     

Development of molecularly imprinted polymeric nanofibers by electrospinning and applications to pesticide adsorption

Novel polystyrene‐based molecularly imprinted polymer nanofibers were synthesized through the electrospinning technique. The molecularly imprinted polymers were prepared using a non‐covalent approach and atrazine as template. For comparison, nonimprinted polymer nanofibers were also synthesized. The morphology of the synthesized nanofibers was characterized using scanning electron microscopy. The adsorption of pesticides, atrazine, atrazine desisopropyl, atraton, carboxin, linuron, and chlorpyrifos was studied under equilibrium (batch) conditions. To describe the adsorption capability of the synthesized polymers, Langmuir and Freundlich models were used. The Freundlich model provided a better mathematical approximation of the sorption characteristic for polymers nanofibers. To evaluate the adsorption capacity in the presence of interferents experiments on river water samples spiked with a mixture of six pesticides were also performed. The results obtained for the highest concentration levels investigated, show a greater amount of pesticide adsorbed on molecularly imprinted polymers and non‐imprinted polymers compared to those obtained using commercial stationary phases used as reference.     

Evaluation of molecularly imprinted membranes based on different acrylic copolymers

Polyacrylonitrile and its copolymers with different functional monomers (itaconic acid, acrylic acid and acrylamide) were synthesized via water-phase precipitation polymerization in order to prepare molecularly imprinted polymer (MIP) membranes with recognition properties for the flavonoid naringin (NR). Membranes were prepared by phase inversion technique using dimethylformamide (DMF) as the solvent and adding naringin as template molecule to the casting solution. For comparison, membranes without template (blank) were prepared and tested. All MIP membranes showed high specific binding capacity; among them, the membrane prepared with the copolymer containing acrylamide as functional group, showed the highest binding capacity. Blank membranes only showed non-specific binding. The bound template was totally recovered and regenerated membranes maintained their initial binding capacity after reuse.