Structure of starches extracted from near isogenic wheat lines

Differential scanning calorimetry (DSC), acidic hydrolysis and different physico-chemical approaches were used to study thermodynamic and structural characteristics of starches from near-isogenic wheat lines to establish the effect of different combinations of active granule-bound starch synthase isoforms, taking part in amylose biosynthesis, on the structure and thermodynamic properties of starches. Obtained results suggest that the effect of different GBSS I combinations is realized through altered amylose localization within starch granules, reflecting in changes of melting temperature of crystalline lamellae (T _m) and rates of acidic hydrolysis. It has also been demonstrated that changes in T _m values for native wheat starches are determined by amylose content in amylopectin clusters.     

Structure of starches extracted from near-isogenic wheat lines

High-sensitivity differential scanning calorimetry (HSDSC) and small-angle X-ray scattering (SAXS) were used to investigate the structural characteristics of starch granules with different amylose content extracted from near-isogenic wheat lines with different combinations of active granule-bound starch synthase (GBSS I) isoforms. Paracrystalline diffraction model, ‘two-state’ model of starch melting and other physico-chemical approaches were used to estimate the sizes of amylopectin clusters, the thicknesses of crystalline lamellae and the structure of amylopectin defects for investigated wheat starches. The joint analysis of SAXS and DSC data has shown that the size of amylopectin cluster, the thickness of crystalline lamellae and the structure of amylopectin defects do not depend on the differences in combinations of active GBSS I isozymes. The data obtained supposed that the amylopectin cluster size and the thickness of crystalline lamellae are, generally, the universal structural parameters for wheat starches. Additionally, the data obtained suggest that increase of amylose content is accompanied by accumulation of both amylose tie-chains, located as defects in crystalline lamellae, and amylose chains oriented transversely to the lamella stack within amorphous lamellae. Disordered ends of amylopectin double helices and/or pre-existing double helices not participating in formation of crystals are considered as amylopectin defects arranged in crystalline lamellae. The relationship between structure of wheat starches extracted from near-isogenic lines and their thermodynamic properties was recognized.     

Influence of Surface-Active Compounds on Starch Dispersion in Water. Part I. Starch Pasting

The influence of native lipids and additives of surface-active compounds on starch paste rheology was investigated. The aim of the study was to gain better understanding of mechanisms involved in starch gelatinization and how these structure changes of granules later affect rheological properties of pastes and gels. Starches from three main sources—potato, maize, and wheat—were tested; sodium dodecylsulfate, oleate, and benzalkonium chloride were employed as additives. Starch pasting was examined by a rheometer to get a viscosity profile, also pastes were analyzed by differential scanning calorimetry, for particle size using a light scattering technique. Results revealed that there was a competition between native lipids and added surfactants for amylose complexation. Complexes formed during gelatinization were strongly affecting granule swelling and dissolution of starch polymers, and viscosity of pastes was mainly dependent on the particle size of a disperse phase in the paste. Addition of strong ionic surfactants to cereal starches resulted in smaller granular remnants and, therefore, decreased viscosity, while the weak anionic surfactant promoted an increase in the particle size and paste viscosity for both cereal and tuber starches. The mechanism of the effect of surfactants on the particle size in pastes is discussed.     

大米淀粉糊化过程的光谱分析

采用衰减全反射傅立叶变换红外光谱仪跟踪测定了不同品种大米淀粉的糊化过程,同时与X-射线衍射仪测定的淀粉结晶度相对比,研究了淀粉颗粒内结晶结构在糊化过程中变化的详细情况.利用红外光谱仪计算出天然大米淀粉及其在糊化过程中各个阶段代表结晶区特征的1047cm-1和代表非晶区特征的1022cm-1两处红外吸收峰强度的比值.结果表明,天然淀粉的结晶区主要由支链淀粉侧链的双螺旋结构所形成;在加热过程中淀粉的结晶结构被破坏,并且直链淀粉含量越高,其结晶结构在糊化过程中破坏越慢,说明直链淀粉能抑制淀粉结晶结构的破坏.利用X-射线衍射仪测定了大米淀粉糊化过程各个阶段的结晶度,进一步验证了淀粉的结晶结构在糊化过程中的损失.虽然,两种测定方法对"结晶度"的定义不同,但对于淀粉结晶程度的测定具有相关性和可比性,能为研究淀粉的糊化行为提供有利的补充信息.     

Effects of NaOH treatment of cereal starch granules on the extent of granular starch hydrolysis

Effect of NaOH treatment on granular hydrolysis of cereal starches was studied and granular starch hydrolyzing enzyme is used to hydrolyze native and NaOH-treated starch for 24?h. The dextrose equivalent value of NaOH-treated starch increased significantly compared to native starch, i.e., 28–38?% for corn, 7–37?% for rice, but no significant increase for corn starch. Scanning electron microscopy micrographs showed that NaOH treatment caused an enlargement of pores and degrades the surface of starch granules. Hydrolyzed-treated starch exhibited rougher surface and more porous granules compared to native starch. The swelling power and pasting properties of NaOH-treated starches were markedly altered after hydrolysis. X-ray pattern of all starches showed no changes and the amylose content decrease significantly after hydrolysis, which could due to extensive degradation of amorphous region. Evidently, NaOH treatment below gelatinization temperature was effective in enhancing the degree of granular starch hydrolysis.     

Structure and Processing Properties of Nine Yam (Dioscorea opposita Thunb) Starches from South China: A Comparison Study

In order to explore the processing and application potential of Chinese yam starch, nine kinds of Chinese yam starch (GY11, GY5, GY2, GXPY, LCY, SFY, MPY, SYPY, ASY) from South China were collected and characterized. The chemical composition, rheological properties, thermal properties, and in vitro starch digestion were compared, and the correlation between the structure and processing properties of these yam starches was analyzed using Pearson correlation. The results show that GY2 had the highest amylose content of 28.70%. All the yam starches were similarly elliptical, and all the yam starch gels showed pseudoplastic behavior. Yam starches showed similar pasting temperatures and resistant starch content, but SYPY showed the largest particle size (28.4 μm), SFY showed the highest setback (2712.33 cp), and LCY showed the highest peak viscosity (6145.67 cp) and breakdown (2672.33 cp). In addition, these yam starches also showed different crystal types (A-type, B-type, C-type), relative crystallinity (26.54–31.48%), the ratios of 1045/1022 cm⁻¹ (0.836–1.213), pasting properties, and rheological properties, so the yam starches have different application potentials. The rheological and pasting properties were related to the structural properties of starch, such as DI, Mw, and particle size, and were also closely related to the thermodynamic properties. The appropriate processing methods and purposes of the processed products of these yam starches can be selected according to their characteristics.     

Rheological properties of native and hydrolyzed starches in dependence on composition and concentration

The structure formation of starch polysaccharides in aqueous solutions is determined by the ratio of amylose to amylopectin and the molecular properties of these components. Our research is focused on establishing defined correlations between composition, molecular structure in diluted solutions and rheological properties of concentrated aqueous starch polysaccharide solutions. Diluted solutions were investigated by size exclusion chromatography with multi angle laser light scattering detector. Measurements of concentrated aqueous solutions were carried out by a Bohlin cs-rheometer with programmed stress using a cone-plate geometry of 40 mm diameter and a cone angle of 4 degrees. Gels were characterized by oscillatory measurements taking into account the frequency dependence of the storage and loss moduli and the influence of a stress sweep on the moduli. The concentration dependence was investigated with starches of potato, wheat, maize and wrinkled pea. Starches with quite similar amylose content as from potato, wheat and maize, show different behavior in rheological properties. Further differences in structure formation were obtained by enzymatic hydrolysis of potato and wheat starch with bacterial α-amylase. The hydrolyzing conditions were chosen such that the degradation led to molecular weights between 5*10⁵ and 10⁷ g/mol. Detailed information about molecular composition was obtained by fractionation of degraded starches. The amylopectin was found to be degraded more strongly than the contained amylose. In comparison to native starch polysaccharide fractions the amylopectin hinders the gelation process in dependence on its molecular weight distribution and the length of the outer chains.     

Hydrolysis of Native and Heat-Treated Starches at Sub-Gelatinization Temperature Using Granular Starch Hydrolyzing Enzyme

The effect of heat treatment below the gelatinization temperature on the susceptibility of corn, mung bean, sago, and potato starches towards granular starch hydrolysis (35°C) was investigated. Starches were hydrolyzed in granular state and after heat treatment (50°C for 30 min) by using granular starch hydrolyzing enzyme for 24 h. Hydrolyzed heat-treated starches showed a significant increase in the percentage of dextrose equivalent compared to native starches, respectively, with corn 53% to 56%, mung bean 36% to 47%, sago 15% to 26%, and potato 12% to 15%. Scanning electron microscopy micrographs showed the presence of more porous granules and surface erosion in heat-treated starch compared to native starch. X-ray analysis showed no changes but with sharper peaks for all the starches, suggested that hydrolysis occurred on the amorphous region. The amylose content and swelling power of heat-treated starches was markedly altered after hydrolysis. Evidently, this enzyme was able to hydrolyze granular starches and heat treatment before hydrolysis significantly increased the degree of hydrolysis.     

Particularities in the structure of amylopectin,amylose and some of their derivatives in solution

Because of a well defined supramolecular architecture of the native starch granules the preparation of molecularly dispersed starch solutions is achieved only after autoclaving at temperatures of 135 to 160 C. A detailed analysis of static light scattering data allowed the determination of the molecular parameters of both the amylopectin and amylose. The results were confirmed by (1) measurements in the iron sodium tartrate complex FeTNa, (2) by extrapolation of the data obtained with degraded starches to no degradation and (3) by sedimentation field-flow-fractionation sFFF. Above the overlap concentration strong aggregation due to H-bonding commenced and eventually led to gelation. The process is promoted by the amylose content and could be followed by static and dynamic light scattering. Cationic starches and cationic amyloses display remarkably different behavior. The branched amylopectin expanded uniformly when the ionic strength was lowered but the corresponding amylose exhibited an unusual helix-disorder transition.     

Evaluation of black tea polyphenol extract against the retrogradation of starches from various plant sources

The effects of black tea polyphenol extract (BTPE) on the retrogradation of starches from different plant sources were studied using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). DSC analysis shows that the gelatinization temperature of maize starch and starches from different rice varieties increased with increasing BTPE level. After storage at 4 °C, BTPE at a concentration of 15% markedly retarded the retrogradation of maize starch and starches from different rice varieties. Native maize starch and starches from different rice varieties showed typical A-type X-ray diffraction patterns, while native potato starch showed a typical B-type X-ray diffraction pattern. Adding BTPE significantly affected the crystalline region and intensities of X-ray diffraction peaks of maize and rice starch granules. It is concluded that adding BTPE markedly inhibits the retrogradation of maize starch and starches from different rice varieties, but has no significant influence on the gelatinization and retrogradation characteristics of potato starch.     

Gelatinization properties of native starches and their Näegeli dextrins

Cassava, potato, sweet potato, and Peruvian carrot starches were hydrolyzed with 15% v/v sulfuric acid solution for up to 30 days. Näegeli dextrins obtained from 1, 3, 6, 12, and 30 days were evaluated using differential scanning calorimeter (DSC) and scanning electron microscopy (SEM). Two phases of hydrolysis were found. The first phase was attributed to faster degradation of amorphous areas of granules, whereas the second phase corresponded to slower degradation of crystalline regions. Peruvian carrot starch was the most susceptible to acid, whereas potato and sweet potato starches were the most resistant. From DSC, it was observed a progressive reduction in peak height and a broadening of peaks with increasing hydrolysis time. The peaks shifted to higher temperatures. Onset temperature decreased on first day of hydrolysis for cassava and Peruvian carrot starches, and on third day for potato and sweet potato. Enthalpy decreased during first stage of hydrolysis in cassava and Peruvian carrot starches, and during second phase, it reduced in all starches. SEM showed that the granule surfaces were degraded by erosion on the first day of treatment, followed by degradation of amorphous areas. On third day, potato and sweet potato starches still displayed some granules almost intact, whereas cassava and Peruvian carrot starch granules were totally degraded, confirming their high susceptibility to acid attack. On sixth day of hydrolysis, starch granules had faceted structures, characteristic of crystalline material. The effect that acid hydrolysis had on thermal properties of starches depended on both hydrolysis stage and starch source.     

Comparison of A and B starch granules from three wheat varieties

Three starches from the wheat varieties AK58, ZM18 and YZ4110 were separated into large (A) and small (B) granules, which were characterized structurally and evaluated for their functional properties. SEM results showed that the size of A-granules from ZM18 and YZ4110 were about the same, but the sizes of A-granules and B-granules from AK58 were larger than those of ZM18 and YZ4110. FTIR spectra showed that all the samples exhibited a similar pattern, with seven main modes with maximum absorbance peaks near 3,500, 3,000, 1,600, 1,400, 1,000, 800, 500 cm-1. The B-granules of ZM18 and YZ4110 had less amylose content, although the difference among the total amylose contents of the three unfractionated starches was not significant. X-ray diffraction (XRD) patterns showed predominantly A-type crystallinity for all the starches. The A-granules showed sharper XRD patterns than the other starches. DSC analysis showed that the A-granules had broader ranges of gelatinization temperatures than the B-granules from the same wheat variety. The gelatinization enthalpy (ΔH) of A-granules was higher than that of B-granules. AK58 exhibited the smallest enthalpy, while ZM18 showed the largest enthalpy. In pasting tests, the A-granule starch of AK58 had higher peak, final and setback viscosity, lower breakdown and pasting temperature, and the B-granule starch and unfractionated starch of AK58 had lower peak, breakdown, final and setback viscosity and higher pasting temperature than ZM18 and YZ4110.     

Fractionation in mixtures of polyethylene oxide fractions during crystallization

Two narrow-molecular-weight-fraction polyethylene oxides were mixed and studied by differential scanning calorimetry (DSC), small-angle x-ray scattering (SAXR), microscopy, and small-angle light scattering (SALS). DSC measurements indicate the presence of two melting points at each composition, leading to a eutectic diagram with a eutectic point located close to the axis of the constituent with the lower molecular weight. The depression in melting point of the higher-molecular-weight component allows the calculation of a thermodynamic interaction parameter of ?0.09 between the two fractions, indicating that they are miscible in the melt despite the fractionation process occurring during crystallization. Two SAXR long periods are also observed at each composition, indicating phase separation during crystallization. These two phases are included into large spherulites, the structure of which depends mainly upon the crystallization characteristics of the higher-molecular-weight component. The other component must then crystallize between the spherulite lamellae. Finally, small spherulites of the order of the micron are observed from the SALS patterns inside the large spherulites (of the order of one millimeter as seen by microscopy). The two polyethylene oxide fractions give rise to different size SALS spherulites and both types of spherulites are present in the mixtures.     

In vitro and in vivo digestibility of native maize starch granules varying in amylose contents

Digestibility of maize starch granules with different amylose content (AL-0, 22, 54, 68, 80, or 90%) was investigated. Measurement of the in vivo resistant starch (RS) content of the starches was performed using surgically prepared ileorectostomized rats. The rats were fed a purified diet containing one of the starches at 652.5 g/kg diet. The in vivo RS content was determined based on the fecal starch excretion. The dietary fiber (DF) value increased as a function of the amylose content in the starch and showed a positive linear correlation with the gelatinization temperature of the granules. In contrast, the in vitro RS content was likely to depend on both the surface area and amylose contents of the starch granules. The maximum in vitro RS content was obtained with AL-68 (54.4%). In vivo RS content showed a significant correlation with the amount of in vitro RS but not in respect to the DF detected. The in vivo RS content of AL-68 (43.4%) was higher than that found in AL-90 (37.8%). A profound gap was observed for AL-54 between the amount of DF (6.4%) and RS (in vitro = 46.6% and in vivo = 40.9%) present. The results suggest that both in vitro and in vivo digestibility of maize starch is affected by the amylose content and surface area of the granules. The current evaluation suggests that the physiological occurrence of RS from maize starch might be predictable by reference to the in vitro RS value.     

Effects of Variety and Growing Location on Physicochemical Properties of Starch from Sweet Potato Root Tuber

Three sweet potato varieties with purple-, yellow-, and white-fleshed root tubers were planted in four growing locations. Starches were isolated from their root tubers, their physicochemical properties (size, iodine absorption, amylose content, crystalline structure, ordered degree, lamellar thickness, swelling power, water solubility, and pasting, thermal and digestion properties) were determined to investigate the effects of variety and growing location on starch properties in sweet potato. The results showed that granule size (D[4,3]) ranged from 12.1 to 18.2 μm, the iodine absorption parameters varied from 0.260 to 0.361 for OD620, from 0.243 to 0.326 for OD680 and from 1.128 to 1.252 for OD620/550, and amylose content varied from 16.4% to 21.2% among starches from three varieties and four growing locations. Starches exhibited C-type X-ray diffraction patterns, and had ordered degrees from 0.634 to 0.726 and lamellar thicknesses from 9.72 to 10.21 nm. Starches had significantly different swelling powers, water solubilities, pasting viscosities, and thermal properties. Native starches had rapidly digestible starch (RDS) from 2.2% to 10.9% and resistant starch (RS) from 58.2% to 89.1%, and gelatinized starches had RDS from 70.5% to 81.4% and RS from 10.8% to 23.3%. Two-way ANOVA analysis showed that starch physicochemical properties were affected significantly by variety, growing location, and their interaction in sweet potato.     

Isothermal microcalorimetric studies on starch retrogradation

In the present study, isothermal microcalorimetry was introduced as a tool to investigate properties of starch retrogradation during the first 24 h. The study was made on purified amylose and amylopectin from corn, as well as on native starches, such as wheat, potato, maize, waxy maize and amylomaize, differing in their amylose content. The results were obtained in the form ofP-t traces (thermal powervs. time), and integration of these traces gave a net exothermic enthalpy of reaction, caused by the crystallization of amylose and amylopectin. TheP-t traces reflected the quantities of amylose and amylopectin in the starch studied. Depending on the amylose content and the botanical source of the starch, the rate of crystallization of amylose was high and predominated over that of amylopectin during the first 5–10 h. The contribution from amylose crystallization to the measured exothermic enthalpy was very substantial during this period. After 10 h, amylose crystallized at a lower constant rate. During the first 24 h, amylopectin crystallized at a low steady rate. The exothermic enthalpies obtained by the isothermal microcalorimetric investigations during the first 24 h of retrogradation were generally low in relation to the endothermic melting enthalpies observed by differential scanning calorimetry (DSC) measurements after 24 h of storage. The discrepancies in enthalpy values between the two methods are discussed in relation to phase separation and the endothermic effects owing to the decrease in polymer-water interactions when polymer-rich regions in the starch gel separate. Besides the exothermic enthalpies obtained, theP-t traces also made it possible to study the initial gelation properties of amylose from different botanical sources. The present study further demonstrated that isothermal microcalorimetry can provide a possible way to investigate the antistaling effect of certain polar lipids, such as sodium dodecylsulphate (SDS) and 1-monolauroyl-rac-glycerol (GML), when added to starches of different botanical origin. The net exothermic heat of reaction for starch retrogradation during the first 24 h was decreased when GML or SDS was added to the starch gels. The recordedP-t traces also showed how the effect of the added lipid influenced different periods during the first 24 h of starch retrogradation, and that the effect depended mainly on the amylose content, the botanical source of the starch, and the type of lipid used. When GML or SDS was added to waxy maize, the isothermal microcalorimetric studies clearly indicated some interaction between amylopectin and the polar lipids. These results concerning the action of anti-staling agents are further discussed in relation to the helical inclusion complexes formed between amylose-polar lipid and amylopectin-polar lipid.The authors thank Eva Qvarnström at the Dept. of Thermochemistry and Eva Tjerneld at the Dept. of Food Technology for valuable practical assistance. Financial support was obtained from the Swedish Council for Forestry and Agricultural Research (SJFR) and the Swedish Farmer's Foundation for Agricultural Research (Stiftelsen Lantbruksforskning).     

Brazilian <Emphasis Type="Italic">Dioscoreaceas</Emphasis> starches

Determination of the characteristics of native starches is crucial in order to select their best application in various industrial fields. Thus, two different types of non-traditional native starches from the Dioscoreaceas species (Dioscorea sp. and Dioscorea piperifolia Humb. var. Wild) were studied regarding their thermal, structural and rheological properties. The results were contrasted with traditional commercial starch sources (potato, cassava and corn). From the thermogravimetric results (TG/DTG), D. piperifolia starch obtained the highest thermal stability of the samples, except for potato starch. Furthermore, using differential scanning calorimetry and viscoamylograph profiles (RVA), it was found that the Dioscoreaceas starches presented a higher onset (T _o) temperature and susceptibility to retrogradation. They also showed lower values in relation to relative crystallinity, which was calculated from their X-ray patterns and tendency to white (L*) colour. The shapes of the Discoreaceas starch granules were determined using electron microscopy; it was found that as the potato starch the Dioscoreaceas starches showed a wide range of particle size.     

Structural and mechanical properties of edible films from composite mixtures of starch,dextrin and different types of chemically modified starch

Abstract

Recent regulations restricting the use of one-use-plastics open the possibility to develop starch-based edible packaging material. The objective of this work was to determine the effect of three different modified starches on starch and dextrin composite edible films by a mixture design approach on edible films’ mechanical properties. The amylose content of chemically modified starches influenced their swelling capacities, where higher amylose content was inversely related to water-power uptake and directly related to film thickness. CMS3 Nifrastarch-TS edible films, with higher amylose content, presented higher puncture force and tensile strength, but lower puncture deformation and elongation, related to a less smooth surface, according to atomic force micrographs. The use of CMS1 Gelamil-100, with lower amylose content, decreased stiffness but increased films’ stretching, presenting higher surface smoothness film topography. The use of commercial chemical modified starches in combination with starch and dextrin will allow to control of edible film thickness and hence, mechanical properties, depending on food covering necessities.     

机械活化木薯淀粉氧化产物的结构表征

采用搅拌球磨机对木薯淀粉进行机械活化,以活化60min的木薯淀粉为原料,CuSO4为催化剂,H2O2为氧化剂干法制备氧化淀粉。利用红外光谱、扫描电子显微镜、X-射线衍射等手段对产物的结构进行表征分析,并与原淀粉的氧化产物进行比较。结果表明,机械活化对木薯淀粉的氧化反应有显著的影响。原木薯淀粉的氧化反应主要发生在淀粉颗粒的表面及无定形区,部分发生在结晶区,产物是无定形及结晶状态的结构;活化淀粉的氧化反应在淀粉团粒表面及内部均匀进行,产物是无定形的聚集状态结构。并就机械活化对淀粉氧化的强化机理进行了探讨。     

半夏淀粉的理化特性

研究了不同产地的4种半夏淀粉的理化特性,包括直链淀粉含量、膨胀度、溶解性、持水性、淀粉粒大小和形貌、结晶类型、热特性和糊化特性等。结果表明,这些半夏淀粉中直链淀粉含量为18.60%～23.91%;膨胀度21.53%～23.09%;溶解度11.5%～32.3%;持水性100.3%～119.0%。淀粉粒单粒球形,卵形或圆半球形,直径2～20μm,复粒由2～3个分粒组成,其结晶类型均为C型,结晶度15.0%～37.9%。用差示扫描量热仪测得的转变温度TO、TP和TC分别为71.58～77.75℃、83.03～83.84℃和89.41～90.99℃,热焓为4.316～5.809 J/g。用快速粘度分析仪测定了4种半夏淀粉的糊化特征值:峰值粘度、热糊粘度、冷糊粘度、稀懈值和回复值分别为149.5～226.2、97.7～127.2、141.8～194.3、50.4～99.0和44.2～67.2 RVU。糊化温度77.8～79.9℃,峰值时间8.3～8.7 min。