Dependence of electrical conductivity and activation energy of lithium?zinc ferrites on sintering temperature and porosity

The electrical conductivity (σ) and thermoelectric power (Q) of polycrystalline lithium zinc ferrites sintered at 1200 and 1300 °C was investigated as a function of temperature. The porosity and activation energy were calculated. It was found that the electrical conductivity is progressively increasing with increase of sintering temperature while the porosity and activation energy decrease continuously. The carrier concentration (n) and mobility (μ) of charge carriers has been discussed as a function of sintering temperature and temperature, respectively.     

Effect of structure on low temperature plasticity and magnetic properties of ageing Pb?Sb alloys below Tc

It was carried out comparative structural, magnetic and mechanical studies of single crystals of Pb—Sb alloys with 0.5–5 at.% Sb, which are II type superconductors. The structure was studied by X-ray diffractometry, small-angle X-ray scattering, microhardness and resistometry methods. It was determined the total volume fraction and the precipitate size. The second critical field H_c2 and the magnetic flux trapping measured at 4.2 K are determined by the solid matrix concentration and the precipitate volume fraction respectively. Plasticity of Pb—Sb crystals was investigated by tension tests at 4.2 K. The dependence of the change of the flow stress, Δτ_sn, at superconducting transition on ageing time and antimony concentration was obtained.     

Use of conduction models in the study of “low temperature” carbons

The frequency (10-10⁸ Hz) and temperature (100–400 K) dependence of the ac conductivity of anthracene carbons is explained within two theoretical models. The properties of carbon heat treated up to 600°C are correctly explained by means of a model where the current flow is due to electron hops over a potential barrier between localized sites.The conductivity of the carbon heat-treated up to 650°C is interpreted using a theory proposed by Mott and Davis. The spatial densities of states are determined in both cases.     

Effects of post-annealing temperature on structural,optical, and electrical properties of MgxZn1−xO films by RF magnetron sputtering

Mg_xZn_1?xO thin films were deposited on quartz substrates by RF magnetron sputtering. The effect of post-annealing temperature on structural, optical, and electrical properties was investigated with the annealing temperatures increasing from 450 to 750 °C. The crystallinity of Mg_xZn_1?xO film annealed at 650 °C was significantly improved while the film annealed at 750 °C showed little improvement. The electrical properties degraded with the increase of annealing temperature. The annealing temperature seemed to impact the E_g value of Mg_xZn_1?xO thin films because of the variation of carrier concentration.     

The effect of composition and temperature on the amount and type of nanoferrite particles inserted in Fe2O3–ZnO–MgO–SiO2 glass–ceramics

Glass–ceramics with the composition 2Fe₂O₃.1ZnO.1MgO.96SiO₂ [4ZnMgFe] and 2Fe₂O₃.2ZnO.3MgO.93SiO₂ [7ZnMgFe] (mol%) were prepared using the sol–gel method. X-ray diffraction (XRD), scanning electron microscopy (SEM), electron diffraction (ED) and Mössbauer spectroscopy (MS) were used to investigate the glass–ceramics structure. The samples contain ferrite nanoparticles embedded in a glass matrix. However, zinc ferrite nanoparticles seems to be the preferential crystalline phase formed. The amount of ferrite particles depends on treatment temperature and sample composition. The Mössbauer spectroscopy measurements show that ferrite nanoparticles can exhibit a ferrimagnetic behaviour combined with superparamagnetism.     

Influence of growth temperature on growth of InGaAs nanowires in selective-area metal–organic vapor-phase epitaxy

Indium-rich InGaAs nanowires were grown on an InP (111)B substrate by catalyst-free selective-area metal–organic vapor phase epitaxy, and the growth-temperature dependence of growth rate and composition was studied. In particular, nanowire growth rate rapidly decreases as growth temperature increases. This tendency is opposite (for a similar temperature range) to that found in a previous study on selective-area growth of gallium-rich InGaAs nanowires. This difference between indium-rich and gallium-rich nanowires suggests that the influence of growth temperature on the growth of InGaAs nanowires is dependent on the group-III supply ratio. On the basis of previous experimental observations in InAs and GaAs nanowires, temperature dependence of nanowire growth rate and its dependence on group-III supply ratio are predicted. A guideline to determine the optimum growth conditions of InGaAs nanowires is also discussed.     

Temperature variation of effective geometry parameter, αg,refractive indices and the determination of orientational orders in three room temperature nematic liquid crystal mixtures

Orientational order parameter, S and effective geometry, α_g are calculated from the refractive index in three nematic room temperature liquid crystal mixtures, blOO3, blOO6, and blO38. The method due to Kuczynski et al. used to determine S from birefringence. The effective geometry parameter is α_g = n_o/n_e. (n_o and n_e are the ordinary and extraordinary refractive indices of the liquid crystal material.) The behavior of α_g as a function of temperature and order parameter has also been reported. The S value calculated from α_g is identically equal to the value obtained from Kuczynski et al method, i.e., from birefringence, δn. Finally, dn_e/dT and dn_o/dT are obtained and the crossover temperatures, T_CO the characteristic temperature, which is in fact the temperature of minimum in the ordinary index of refraction in three mixtures for different wavelengths are calculated from dn_o/dT.     

Relationship between superconducting transition temperature and crystal-structure parameters of ceramics Tl2Ba2CuO6±x prepared by high-pressure cold pressing

The relationship between the superconducting transition temperature T _c and the crystal-structure parameters of high-temperature superconducting ceramic samples of the Tl2201 phase, which were prepared using high-pressure cold pressing, has been determined. The cold pressing under high pressure has been shown to lead to elongation of the Ba-Ba distances and a decrease in the hole concentration in thallium-containing high-temperature superconducting samples. The planar Cu-O1_plan distances and the structural distortion of the CuO₂ layers were found to have the greatest effect on the T _c value.     

On the position of the upper limit temperature of homogeneous nucleation of precipitates in low concentrated Al?Zn alloys

The upper limit temperature T_hn of the onset of homogeneous nucleation of Guinier-Preston (GP) zones was determined for three Al Zn alloys with xZn = 4.5, 6.0 and 8.0 at.% by SAXS investigations (cooling from the range of homogeneity to various temperatures T_a and ageing at T_a). The results are T_hn = (95 ± 3) °C for xZn = 4.5 at.%, (118 ± 3) °C (6.0 at.%) and (154 ± 3) °C (8.0 at.%), respectively. The obtained results fit well the data known for the alloys with higher contents of Zn. It is stressed that one has to distinguish between T_hn, determined by isothermal measurements after a direct quench or cooling to the respective T_a, and the upper limit temperature T_rhn of the onset of the rapid homogeneous nucleation of GP zones (continuous cooling).     

Gel growth of α and γ glycine and their characterization

The microbial free single crystals of α and γ glycine were grown from gel at room temperature in a new chemical route. These crystals showed a superior quality than the solution grown crystals. The metastable α-form and the stable γ-form of glycine were crystallized in silica gel by solubility reduction method. The form of crystallization is confirmed by single crystal and powder X-ray diffraction analyses. The crystals of α and γ glycine were found to crystallize in monoclinic and hexagonal crystal systems, respectively. For analyzing the functional group and thermal stability of α and γ glycine crystals, spectroscopic and thermal analyses have been carried out. The dielectric studies were performed to find the dielectric constant of the grown crystals and the results are discussed. Second harmonic generation efficiency of the crystal was measured by Kurtz’s powder method using Nd:YAG laser and it was found to be 2.68 times that of potassium dihydrogen phosphate crystals.     

Synthesis and crystal and molecular structure of newN-substituted γ-hydroxybutyramides

TheN-(2-phenylethyl)amide of-(1, 1-ethylenedioxy)-ethyl--hydroxybutyric acid (II) and theN-(p-methoxybenzyl)amide of-(1, 1-ethylenedioxy)-ethyl--hydroxybutyric acid (III) have been synthesized and the crystal structure ofIII has been solved. CompoundIII, C₁₆H₂₃O₅N, crystallizes in the monoclinic space groupP2₁/c witha=12.572(2),b=11.149(2),c=12.317(2) Å and=106.53(1)°. The structure was solved by direct methods, and refined by full-matrix least squares to giveR=0.040 (R _w =0.047) for 2004 intensities. The dioxolane ring has a deformed half-chair conformation.     

Thermal conductivity of FeS2 pyrite crystals in the temperature range 50–300 K

The thermal conductivity of two single-crystal samples of pyrite FeS₂ are investigated by the method of stationary longitudinal heat flux in the temperature range 50–300 K. The low electrical conductivity of the crystals with a small impurity content causes an identical value of experimental lattice thermal conductivity. The temperature dependence of the phonon mean free path is established.     

Molecular and crystal structures of the products of crystallization of (N′-furfurylidene)isonicotinoylhydrazide from aqueous solutions of hydrochloric and acetic acids

Crystals of (N′-furfurylidene)isonicotinoylhydrazide (I), which have been isolated from a water-methanol solution of hydrochloric acid (Ia) and an aqueous solution (～50%) of acetic acid (Ib), are studied by X-ray diffraction. In Ia, the nitrogen atom of the pyridine ring is protonated. In the crystal, the intermolecular C=O?HN(Py) hydrogen bonds link the I · H⁺ cations into chains which are bound through centrosymmetric NH?W?Cl^??W′?H′N′ bridges. In molecule Ib, no protonation occurs; however, its pyridine N atom is blocked by the hydroxyl H atom of a solvate molecule of acetic acid. Crystals Ib have a layered structure. The crystallization water molecule is involved in the formation of three intermolecular hydrogen bonds, namely, those with the H atom of the amide group and the carbonyl O atoms of molecule I and an acetic acid molecule of the neighboring layer.     

Synthesis of spinacine and spinacine derivatives: crystal and molecular structures of Nπ-hydroxymethyl spinacine and Nα-methyl spinaceamine

The natural amino acid L-Spinacine (4,5,6,7-tetrahydro-1H-imidazo[4,5-c]pyridine-6-carboxylic acid) has been synthesized following a new pathway which gives a chemically and optically pure product with an excellent yield. The crystal structures of a synthetic intermediate, N^π-hydroxymethyl-spinacine, and a spinacine derivative, N^α-methyl-spinaceamine, have been investigated through X-ray diffraction: Spi(πMeOH)·H₂O, monoclinicP2 _i,a=8.571(1),b=6.682(1),c=8.588(1) Å, and β=94.67(1)^o. Spm(αMe)·2HCl·H₂O, triclinicP l,a=7.492(4),b=10.799(3),c=7.040(2) Å, α=91.88(2), β=98.36(3) and γ=73.34(3)^o. Spi(πMeOH) crystallizes with a water molecule and displays a zwitterionic character. The carboxylate group is in equatorial position and forms a short electrostatic interaction of 2.618(2) Å between one of its oxygens and the protonated nitrogen of the tetrahydropyridine ring. The crystal packing is assured by strong O?H???O, O?H???N, N?H???N intermolecular hydrogen bonds and C?H???O close contacts. The biprotonated compounds Spm(αMe) crystallizes with two Cl^? anions and a water molecule. The positive charge on the imidazole ring is delocalized on the conjugated moiety N=C?N. The crystal is built up by clusters formed by two biprotonated Spm(αMe) molecules, four Cl^? anions and two water molecules linked together by hydrogen bonds.     

Detailed study of surface and interface properties of μc-Si films

The properties of surfaces and interfaces of microcrystalline films deposited by radio-frequency plasma enhanced chemical vapor deposition (RF-PECVD) were studied by spectroscopic ellipsometry. The effect of the low-power reactive ion etching (RIE) on the properties of the films was investigated. The surface properties could be effectively improved using RIE to eliminate of the top porous part of the films, without deterioration of bulk layer properties. Ellipsometric measurements from both film and substrate sides were used for the study of the interface properties of the various samples deposited on fused silica substrates. We show that the crystalline fraction that determined from modeling of ellipsometric spectra measured from the film side could be overestimated.     

Change of short-range order with temperature and composition in liquid GexSe1−x as shown by density measurements

Density measurements were performed on melts of the binary chalcogenide system Ge_xSe_1?x (0 ? x ? 0.5) up to 1000°C. The isotherm of molar volumes V_m at 750°C shows a relative maximum near GeSe₂. Molar volumes of the system behave linearly between GeSe and Se at 1000°C. V_m's of melts between x = 0.30 and x = 0.35 decrease at high temperatures on heating. The anomalous density behaviour of the melts clearly shows a change of short-range order from a less to a more densely packed structure, caused by the development of a pσ-bonding system. Within the composition range $\text{0 ? x ?}\text{1}\text{3}$ the short-range order at lower temperatures is determined mainly by $\text{GeSe}{}_{\mathrm{<mtext>4</mtext><mtext>2</mtext>}}$ tetrahedra linked directly corner-to-corner or via Se atoms. At higher temperatures pσ bonds arise more and more, even in melts rich in selenium. Within the composition range $\text{1}\text{3}\text{? x ? 0.5}$ the short-range order is mainly determined by a distorted octahedral configuration, even at lower temperatures. From the short-range orders of melts and from crystalline structures of GeSe₂ and GeSe, the tendency of glass formation from the melt is discussed in detail.     

Structural and magnetic properties of ZnO and Zn1−xMnxO nanocrystals

Chemical precipitation of metal-ions from aqueous solution has been successfully used to produce Zn_1?xMn_xO nanocrystals, in the form of nano-powder. X-ray diffraction (XRD) measurements reveal that the as-prepared samples are single-phase materials and their lattice constant changes with the variation of Mn-concentration, which indicates the incorporation of Mn²⁺ into the hosting ZnO. These findings are corroborated by the observation of the well defined six hyperfine lines of Mn²⁺ ion in the electron paramagnetic resonance (EPR) spectra of the samples with a low Mn-concentration, and of a broad EPR line, which manifests the onset of Mn–Mn exchange interaction, in the samples with an elevated value of x.