Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.     

Précisions apportées au mécanisme de la polymérisation du chlorure de vinyle par le chlorure de tertiobutyle-magnésium en milieu tétrahydrofurannique. Etude par résonance magnétique nucléaire

NMR analysis of the low molecular weight poly(vinyl chloride) obtained from polymerizations initiated by t-BuMgCl in THF solution suggests that all the polymer chains have the structure: Enhanced signal/noise ratio by NMR spectrum accumulation confirms this structure in products of higher molecular weights. Examination of the NMR spectrum of vinyl chloride monomer in THF solution reveals the formation of a monomer–THF complex; it seems that the initiation step of the polymerization is governed by this complexation phenomenon.     

Facile Synthesis of Self‐Assembled Polyaniline Nanodisks

Polyaniline nanodisks have been synthesized successfully by the chemical oxidation polymerization of aniline by a self‐assembly process without the use of any acid. The thickness and lateral dimensions of the polyaniline nanodisks are in the range of 20–30 nm and 1–2 µm, respectively. The influence of synthetic parameters, such as the concentration of ammonium peroxydisulfate and pH, on the morphologies of polyaniline nanostructures have been investigated.

     

Oxazolidines versus schiff bases

The formation of oxazolidines from propionaldehyde and aliphatic β-aminoalcohols is complicated by the appearance of appreciable amounts of unsaturated Schiff bases. The simple Schiff base, often the dominant species when aromatic aldehydes react with amines, could not be detected in the present aliphatic systems. We conclude that in aliphatic systems the order of stability is and . The gem-dimethyl group α to nitrogen stablizes the heterocyclic ring remarkably.     

Kinetics of the First Order Autocatalytic Decomposition Reaction of Nitrocellulose （13.86% N）

The kinetics of the first order autocatalytic decomposition reaction of nitrocellulose (NC, 13.86% N) was studied by using DSC. The results show that the DSC curve for the initial 50% of conversion degree of NC can be de scribed by the first order autocatalytic equation dy/dt =-10^16.3 exp (-181860/RT)y-10^16.7ex(-173050/RT)y(1-y) and that for the latter 50% conversion degree of NC described by the reaction equations dy/dt=-10^16.4exp(-154820/RT)y (n=1) and dy/dt=-10^16.9 exp(-155270/RT) y^2.80(n≠1).     

Strategy for Better Ordering in Diblock Copolymer Based Nanocomposites

A simple approach to improve the structural ordering in block copolymer/nanoparticle nanocomposites is presented. It is to blend a small molecular weight homopolymer with the composites, which can uniformly swell the preferred domain where the nanoparticles locate and increase the conformational entropy of the domain. Consequently, the interfaces between the block copolymer domains become smooth that improves the long range order in the nanocomposites. Furthermore, the uniform swelling of the preferred domain by the homopolymer will allow higher loading of nanoparticles without adversely affecting the long range order.

     

Ab-initioMRD–CI calculations on a C?NO2 decomposition pathway of nitrobenzene

To study molecular decomposition pathways it is necessary to use ab initio multireference determinant–configuration interaction or MCSCF (multiconfiguration SCF ) calculations. The MRD –CI (multireference double excitation–configuration interaction technique of Buenker and Peyerimhoff) calculations on the decomposition pathway of nitrobenzene were carried out using all of the occupied molecular orbitals in the region of the bond being dissociated, plus all of the virtual orbitals. An effective CI Hamiltonian was used into which were folded the effects of all of the occupied molecular orbitals from which excitations were not allowed. So far we have investigated the lowest ¹A₁, ³A₁, ¹A₂, ³A₂, ¹B₁, ³B₁, ¹B₂, ³B₂ states and are investigating the higher states. Our results show a wealth of structure in the potential energy surfaces for the various electronic states of nitrobenzene as a function of distance. A number of the states are predissociative and change dominant configuration one or more times along these potential energy surfaces.     

Crystalline Complex of Syndiotactic Polystyrene with Poly(ethylene Glycol) Dimethyl Ethers

It has been clarified that syndiotactic polystyrene (sPS) forms co‐crystalline structures with polyethylene glycol dimethyl ethers (PEGDMEs) with molecular weights ranging from 178 to 1 000 g · mol⁻¹ through a guest exchange procedure assisted by a plasticizing agent. The PEGDME molecules are incorporated into the spaces between sPS polymer sheets consisting of (T₂G₂)₂ helices. The results of X‐ray diffraction and gravimetric measurements suggest that one or less molecules are included per unit cell for PEGDME with average molecular weight of 1 000 g · mol⁻¹, which indicates the possibility that longer polymeric molecules can be introduced into sPS lattices with multiple site occupation.

     

Molecular Evolution of Polymers through Photoageing: A New UV in situ Viscoelastic Technique

Summary: Dienic elastomers are highly sensitive towards oxidation. During UV exposure, both scission and/or recombination reactions compete which involves an evolution of the molecular structure of the material. We developed an in situ technique to monitor the viscoelastic property changes upon UV irradiation of polymers in a single experiment. We illustrated this photorheology technique in the case of two kinds of elastomers. From our findings, this method is assumed to bring significant new advantages.

Photograph of the photorheometer used in this study.     

Phenylenevinylene Block Copolymers via Ring‐Opening Metathesis Polymerization

Fully conjugated block copolymers containing 1,4‐ and 1,3‐phenylenevinylene repeating units can be prepared by the sequential ring opening metathesis polymerization of strained cyclophanedienes, initiated by ruthenium carbene complexes (Grubbs metathesis catalysts). The molecular weight of the constituent blocks can be tightly controlled by changing the catalyst to monomer ratio and the volume fraction of the block copolymers independently tailored by the ratio of the monomers employed. Extensive phase separation between the constituent blocks is observed in thin films of these polymers by atomic force microscopy and efficient energy transfer between blocks containing 1,4‐ and 1,3‐phenylenevinylene units can be seen in the photoluminescence of these materials.

     

Molecular confirmation and crystal structure of the β form of poly(ethylene oxybenzoate)

The crystal structure of the β form of poly(ethylene oxybenzoate) was analyzed by x-ray diffraction. Four nearly extended molecular chains pass through a unit cell with parameters a = 8.19 Å, b = 11.07 Å, c (fiber axis) = 19.05 Å, β = 114.8°, and the space group P2₁/n-C. The structural difference between the α and β forms is mainly due to the internal rotation angles for the virtual bond and the ? CH₂? CH₂? bond. They are essentially in trans confirmation in the β form, while the α form contains cis and gauche (? CH₂? CH₂? ) conformations.     

Preparation of Magnetite Nanoparticles Coated with an Amphiphilic Block Copolymer: A Potential Drug Carrier with a Core‐Shell‐Corona Structure for Hydrophobic Drug Delivery

Summary: The synthesis of magnetic magnetite nanoparticles coated with amphiphilic block copolymers of poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) for use as new potential carriers for hydrophobic drug delivery is reported. The results show that a new core‐shell‐corona structural material is obtained with a very narrow molecular weight distribution of the hydrophobic segment (PDI = 1.10). UV‐Vis results show that 37% of progesterone is released from the nanoparticles after 22 h, much slower than free release (99% after 14 h), which demonstrates that the presence of the hydrophobic segment can effectively control the release of hydrophobic drugs.

Synthesis of an amphiphilic block polymer poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) on magnetite nanoparticles and their use as potential drug carriers     

Darstellung und Stabilität von Aroxy-fluor-silanen

Preparation and Stability of Aroxy-fluoro-silanes. Different possibilities for preparation of aroxy-fluoro-silanes (esp. substituted phenoxy-fluoro-silanes) are investigated. The reaction was proved as the best method of preparation. The aroxy-fluoro-silanes are disposed to dismutation reactions.     

Effects of molecular weight,rubber toughening,and environment on fatigue crack propagation behavior of block amide copolymers

The Fatigue Crack Propagation (FCP) behavior of block amide copolymers is investigated as a function of molecular weight, rubber toughening as well as environmental conditions. The enhancement of FCP resistance with increasing average molecular weight is shown and correlated to features observed on the fracture surface. Particular attention is paid to hysteretic heating, measured with an infrared camera, in the crack tip zone of different average molecular weight copolymers and rubber-toughened copolymer. A FCP approach of stress-cracking in an aqueous solution of zinc chloride is proposed here. An improvement in FCP resistance as the average molecular weight increases, similar to that exhibited in normal environment, appears. The shift in da/dN values over the tested range of can be approximated by an exponential function:      

Electron-impact and thermal fragmentation patterns of some cyclic fluoroethers

The mass spectra of cyclic fluoroethers of the general formula (n = 1 to 4) are reported and discussed. Although these spectra show many similar features, those for which n = 3 and 4 contain intense peaks at m/e 63 which are only of relatively low intensity in the spectra of the other two. A similarity between the electron-impact and thermal fragmentation patterns of these compounds is noted.     

Flash Photolysis of 2,4,6-Trinitrotoluene Solutions

Flash photolysis of 2,4,6-trinitrotoluene solutions (TNT) indicates a photochemically induced isomerization leading to the aci-quinoid isomer with an absorption maximum at 460 nm in nonpolar solvents, or the conjugate base of the aci-quinoid isomer with absorption maxima at 500, 540, and 630 nm in polar solvents. Both species, the quinoid isomer and the conjugate base, have transient existence and their identification was based on detailed spectroscopic and kinetic studies presented here. The magnitude of the negative charge on the transient conjugate base was determined with salt effect experiments and found to be equal to unity.     

Synthesis of Poly(ethylene oxide)s Bearing Functional Groups along the Chain

Well‐defined poly(ethylene oxide)s (PEOs) bearing reactive sites regularly distributed along the chain have been synthesized by the polycondensation of PEO containing a central tertiary amino group with dichloromethane, followed by quaternization with suitable reagents to obtain polyzwitterionic or cationic PEOs with alkyl, allyl, or fluorocarbon pendant groups. The pendant allyl groups have been converted into primary amino groups by reaction with 2‐aminoethanethiol hydrochloride to obtain polyamino‐functionalized PEO.

Polyfunctional PEOs bearing different pendant groups.     

The mass spectra of some chlorinated aromatic pesticidal compounds

Mass spectral studies of some chlorinated aromatic pesticidal compounds are reported. The compounds studied include substituted diphenyl derivatives of methane, ethene and methanol. The diphenylmethanes are characterized by a relatively intense peak at m/e 165. Comparison of their low voltage spectra with 9-dichloromethylfluorene indicates that this ion has a fluorenyl ion structure. The structure of the base peak (m/e 246) of the diphenylethenes was investigated by comparing competitive metastable transitions with 9-dichloromethylenefluorene and utilizing defocusing metastables. Additional studies of model compounds suggest that the m/e 246 ion is very complex and is probably comprised of a number of structures. The mass spectra of the diphenylmethanols are significantly different from the other two groups. The hydroxyl group markedly affects the fragmentation process for these compounds; the characteristic peak is presumably the chlorobenzoyl ion and is probably precursor for other fragment ions. Mass spectral correlations of pesticidal compounds of similar structure are needed to obtain enough background to facilitate interpretation of the mass spectra of their metabolites. Furthermore, such studies make feasible the identification of characteristic product ions formed by rearrangement processes during ionization of organic molecules in the gas phase. This information can be a nucleus for correlating the other significant mass spectral data of an unknown compound. Intensive studies of carbamates,¹ organophosphorus² and bridged polycyclic chlorinated pesticidal³ compounds were invaluable in identifying metabolites of the aforementioned pesticides.^4,5,6 The compounds in this Work are chlorinated aromatic pesticidal compounds which consist of a diphenylemthane, a diphenylethylene, or a diphenylmethanol structure. The compounds p,?-DDE were briefly discussed by Jorg, Houriet and Spiteller.⁷ The compounds examined are listed in Table 1. Treatment of data. The mass spectra of the pesticides are presented as bar graphs in Figs 1 to 12 It a metastable peak is observed, the metastable transition is indicated by m^* on the figures and also by (m^*) when confirmed or identified using the defocusing technique.⁸ Since the relative abundances of the metastable peaks for these compounds are very small (<0.1%) on special effort was made to establish their presence unless they wre pertinent.     

Microwave Accelerated Polymerization of 2‐Phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine: Kinetics and Influence of End‐Groups on Glass Transition Temperature

Summary: The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine (PhOZI) with methyl tosylate (MeOTs) and butyl iodide (BuI) as initiators were performed in refluxing butyronitrile. Reaction kinetics under microwave irradiation was compared with conventional oil bath heating. The polymerization rates, under microwave irradiation, showed an acceleration by a factor of 1.8 (independently from the used initiator). The investigation of the thermal properties of the obtained poly(N‐benzoyl‐trimethyleneimine) showed the influence of molecular weight and end‐groups on the glass transition temperature.

The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine performed in refluxing butyronitrile.