Characterizing mixed phosphonic acid ligand capping on CdSe/ZnS quantum dots using ligand exchange and NMR spectroscopy

The ligand capping of phosphonic acid functionalized CdSe/ZnS core–shell quantum dots (QDs) was investigated with a combination of solution and solid‐state ³¹P nuclear magnetic resonance (NMR) spectroscopy. Two phosphonic acid ligands were used in the synthesis of the QDs, tetradecylphosphonic acid and ethylphosphonic acid. Both alkyl phosphonic acids showed broad liquid and solid‐state ³¹P NMR resonances for the bound ligands, indicative of heterogeneous binding to the QD surface. In order to quantify the two ligand populations on the surface, ligand exchange facilitated by phenylphosphonic acid resulted in the displacement of the ethylphosphonic acid and tetradecylphosphonic acid and allowed for quantification of the free ligands using ³¹P liquid‐state NMR. After washing away the free ligand, two broad resonances were observed in the liquids' ³¹P NMR corresponding to the alkyl and aromatic phosphonic acids. The washed samples were analyzed via solid‐state ³¹P NMR, which confirmed the ligand populations on the surface following the ligand exchange process. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly Luminescent and Ultrastable CsPbBr3 Perovskite Quantum Dots Incorporated into a Silica/Alumina Monolith

We successfully prepared QDs incorporated into a silica/alumina monolith (QDs‐SAM) by a simple sol–gel reaction of an Al–Si single precursor with CsPbBr₃ QDs blended in toluene solution, without adding water and catalyst. The resultant transparent monolith exhibits high photoluminescence quantum yields (PLQY) up to 90 %, and good photostability under strong illumination of blue light for 300 h. We show that the preliminary ligand exchange of didodecyl dimethyl ammonium bromide (DDAB) was very important to protect CsPbBr₃ QDs from surface damages during the sol–gel reaction, which not only allowed us to maintain the original optical properties of CsPbBr₃ QDs but also prevented the aggregation of QDs and made the monolith transparent. The CsPbBr₃ QDs‐SAM in powder form was easily mixed into the resins and applied as color‐converting layer with curing on blue light‐emitting diodes (LED). The material showed a high luminous efficacy of 80 lm W⁻¹ and a narrow emission with a full width at half maximum (FWHM) of 25 nm.     

Completely Amine-Free Open-Atmospheric Synthesis of High-Quality Cesium Lead Bromide (CsPbBr3) Perovskite Nanocrystals

Cesium lead halide perovskite nanocrystals (NCs) CsPbX₃ (X=Cl, Br, and I) have been prominent materials in the last few years due to their high photoluminescence quantum yield (PLQY) for light-emitting diodes and other significant applications in photovoltaics and optoelectronics. In colloidal CsPbX₃ synthesis, the most commonly used ligands are oleic acid and oleylamine. The latter plays an important role in surface passivation but may also be responsible for poor colloidal stability as a result of facile proton exchange leading to the formation of labile oleylammonium halide, which pulls halide ions out of the NC surface. Herein, a facile, efficient, completely amine-free synthesis of cesium lead bromide perovskite nanocrystals using hydrobromic acid as halide source and tri-n-octylphosphane as ligand under open-atmospheric conditions is demonstrated. Hydrobromic acid serves as labile source of bromide ion, and thus this three-precursor approach (separate precursors for Cs, Pb, Br) gives more control than a conventional single-source precursor for Pb and Br (PbBr₂). The use of HBr paved the way to eliminate oleylamine, and thus the formation of labile oleylammonium halide can be completely excluded. Various Cs:Pb:Br molar ratios were studied and optimum conditions for making very stable CsPbBr₃ NCs with high PLQY were found. These completely amine-free CsPbBr₃ perovskite NCs synthesized under bromine-rich conditions exhibit good stability and durability for more than three months in the form of colloidal solutions and films, respectively. Furthermore, stable tunable emission across a wide spectral range through anion exchange was demonstrated. More importantly, this work reports open-atmosphere-stable CsPbBr₃ NCs films exhibiting strong PL, which can be further used for optoelectronic device applications.     

Acidity and Hydrogen Exchange Dynamics of Iron(II)‐Bound Nitroxyl in Aqueous Solution

Nitroxyl‐iron(II) (HNO‐Fe^II) complexes are often unstable in aqueous solution, thus making them very difficult to study. Consequently, many fundamental chemical properties of Fe^II‐bound HNO have remained unknown. Using a comprehensive multinuclear (¹H, ¹⁵N, ¹⁷O) NMR approach, the acidity of the Fe^II‐bound HNO in [Fe(CN)₅(HNO)]³⁻ was investigated and its pK_a value was determined to be greater than 11. Additionally, HNO undergoes rapid hydrogen exchange with water in aqueous solution and this exchange process is catalyzed by both acid and base. The hydrogen exchange dynamics for the Fe^II‐bound HNO have been characterized and the obtained benchmark values, when combined with the literature data on proteins, reveal that the rate of hydrogen exchange for the Fe^II‐bound HNO in the interior of globin proteins is reduced by a factor of 10⁶.     

Coordination Mode of the Nickel(II) Cation with N‐Diisopropoxyphosphinyl‐p‐bromothiobenzamide

Reaction of the potassium salt of N‐diisopropoxyphosphinyl‐p‐bromothiobenzamide p‐BrC₆H₄C(S)NHP(O)(OiPr)₂ ( HL ) with Ni(NO₃)₂ in aqueous EtOH leads to complex of formula [Ni(HL‐O)₂(L‐O,S)₂] ( 1 ). The structure of 1 was investigated by single crystal X‐ray diffraction analysis, IR, ¹H and ³¹P{¹H} NMR spectroscopy, MALDI and microanalysis. The nickel(II) ion in 1 has a tetragonal‐bipyramidal environment, (O^ax)₂(O^eq)₂(S^eq)₂, with two neutral ligand molecules coordinated in axial positions through the oxygen atoms of the P=O groups. The equatorial plane of bipyramide is formed by two anionic ligands involving 1,5‐O,S‐coordination mode. The chelating ligands are bound in trans configuration.     

Amino‐Assisted Anchoring of CsPbBr3 Perovskite Quantum Dots on Porous g‐C3N4 for Enhanced Photocatalytic CO2 Reduction

Halide perovskite quantum dots (QDs) have great potential in photocatalytic applications if their low charge transportation efficiency and chemical instability can be overcome. To circumvent these obstacles, we anchored CsPbBr₃ QDs (CPB) on NH_x‐rich porous g‐C₃N₄ nanosheets (PCN) to construct the composite photocatalysts via N?Br chemical bonding. The 20 CPB‐PCN (20 wt % of QDs) photocatalyst exhibits good stability and an outstanding yield of 149 μmol h^?1 g^?1 in acetonitrile/water for photocatalytic reduction of CO₂ to CO under visible light irradiation, which is around 15 times higher than that of CsPbBr₃ QDs. This study opens up new possibilities of using halide perovskite QDs for photocatalytic application.     

Molecular‐Recognition‐Assisted pKa Shifts and Metal‐Ion‐Induced Fluorescence Regeneration in p‐Sulfonatocalix[6]arene‐Encapsulated Acridine

The host–guest interactions of cationic (AcH⁺) and neutral (Ac) forms of the dye acridine with the macrocyclic host p‐sulfonatocalix[6]arene (SCX6) were investigated by using ground‐state absorption, steady‐state and time‐resolved fluorescence, and NMR measurements. The cationic form undergoes significant complexation with SCX6 (K_eq=2.5×10⁴ M ^?1), causing a sharp decrease in the fluorescence intensity and severe quenching in the excited‐state lifetime of the dye. The strong binding of the AcH⁺ form of the dye with SCX6 is attributed to ion–ion interactions involving the sulfonato groups (SO₃^?) of SCX6 and the positively charged AcH⁺ at pH of approximately 4.3. Whereas, the neutral Ac form of the dye undergoes weak complexation with SCX6 (K_eq=0.9×10³ M ^?1) and the binding constant is lowered by one order of magnitude compared with that of the SCX6–AcH⁺ system. The strong affinity of SCX6 to the protonated form leads to a large upward pK_a shift (≈2 units) in the dye. In contrast, strong emission quenching upon SCX6 interaction and the regeneration of fluorescence intensity of the dye in the presence of Gd³⁺ through competitive binding have also been demonstrated.     

表面配体对CdSe量子点发光性质的影响

本文采用热注入法合成了以油胺/油酸为表面配体的、粒径均一的CdSe量子点(CdSe QDs)。调节表面配体交换中辛硫醇与CdSe QDs的比例,研究了表面配体对CdSe QDs光致发光及电致化学发光性质的影响,并提出了CdSe QDs的发光模型。结果表明,辛硫醇表面配体显著影响CdSe QDs的带边发射和深能级陷阱发射,因而导致CdSe QDs光致发光强度的显著降低,以及电致化学发光强度的增加。上述结果为进一步提高量子点的发光性能提供了依据。     

High‐Performance CsPb1−xSnxBr3 Perovskite Quantum Dots for Light‐Emitting Diodes

All inorganic CsPbBr₃ perovskite quantum dots (QDs) are potential emitters for electroluminescent displays. We have developed a facile hot‐injection method to partially replace the toxic Pb²⁺ with highly stable Sn⁴⁺. Meanwhile, the absolute photoluminescence quantum yield of CsPb_1−x Sn_x Br₃ increased from 45 % to 83 % with Sn^IV substitution. The transient absorption (TA) exciton dynamics in undoped CsPbBr₃ and CsPb_0.67Sn_0.33Br₃ QDs at various excitation fluences were determined by femtosecond transient absorption, time‐resolved photoluminescence, and single‐dot spectroscopy, providing clear evidence for the suppression of trion generation by Sn doping. These highly luminescent CsPb_0.67Sn_0.33Br₃ QDs emit at 517 nm. A device based on these QDs exhibited a luminance of 12 500 cd m⁻², a current efficiency of 11.63 cd A⁻¹, an external quantum efficiency of 4.13 %, a power efficiency of 6.76 lm w⁻¹, and a low turn‐on voltage of 3.6 V, which are the best values among reported tin‐based perovskite quantum‐dot LEDs.     

Carboxylic‐Acid‐Passivated Metal Oxide Nanocrystals: Ligand Exchange Characteristics of a New Binding Motif

Ligand exchange is central in the processing of inorganic nanocrystals (NCs) and requires understanding of surface chemistry. Studying sterically stabilized HfO₂ and ZrO₂ NCs using ¹H solution NMR and IR spectroscopy as well as elemental analysis, this paper demonstrates the reversible exchange of initial oleic acid ligands for octylamine and self‐adsorption of oleic acid at NC surfaces. Both processes are incompatible with an X‐type binding motif of carboxylic acids as reported for sulfide and selenide NCs. We argue that this behavior stems from the dissociative adsorption of carboxylic acids at the oxide surface. Both proton and carboxylate moieties must be regarded as X‐type ligands yielding a combined X₂ binding motif that allows for self‐adsorption and exchange for L‐type ligands.     

Efficient Electronic Communication of Two Ruthenium Centers through a Rigid Ditopic N‐Heterocyclic Carbene Linker

A ditopic benzobis(carbene) ligand precursor was prepared that contained a chelating pyridyl moiety to ensure co‐planarity of the carbene ligand and the coordination plane of a bound octahedral metal center. Bimetallic ruthenium complexes comprising this ditopic ligand [L₄Ru‐C,N‐bbi‐C,N‐RuL₄] were obtained by a transmetalation methodology (C,N‐bbi‐C,N=benzobis(N‐pyridyl‐N′‐methyl‐imidazolylidene). The two metal centers are electronically decoupled when the ruthenium is in a pseudotetrahedral geometry imparted by a cymene spectator ligand (L₄=[(cym)Cl]). Ligand exchange of the Cl^?/cymene ligands for two bipyridine or four MeCN ligands induced a change of the coordination geometry to octahedral. As a consequence, the ruthenium centers, separated through space by more than 10 Å, become electronically coupled, which is evidenced by two distinctly different metal‐centered oxidation processes that are separated by 134 mV (L₄=[(bpy)₂]; bpy=2,2′‐bipyridine) and 244 mV (L₄=[(MeCN)₄]), respectively. Hush analysis of the intervalence charge‐transfer bands in the mixed‐valent species indicates substantial valence delocalization in both complexes (delocalization parameter Γ=0.41 and 0.37 in the bpy and MeCN complexes, respectively). Spectroelectrochemical measurements further indicated that the mixed‐valent Ru^II/Ru^III species and the fully oxidized Ru^III/Ru^III complexes gradually decompose when bound to MeCN ligands, whereas the bpy spectators significantly enhance the stability. These results demonstrate the efficiency of carbenes and, in particular, of the bbi ligand scaffold for mediating electron transfer and for the fabrication of molecular redox switches. Moreover, the relevance of spectator ligands is emphasized for tailoring the degree of electronic communication through the benzobis(carbene) linker.     

Carbohydrate–Lipid Interactions: Affinities of Methylmannose Polysaccharides for Lipids in Aqueous Solution

The interactions between 3‐O‐methyl‐mannose polysaccharides (MMPs), extracted from Mycobacterium smegmatis (consisting of a mixture of MMP‐10, ‐11, ‐12 and ‐13) or obtained by chemical synthesis (MMP‐5_s, ‐8_s, ‐11_s and ‐14_s), and linear saturated and unsaturated fatty acids (FAs), and a commercial mixture of naphthenic acids (NAs) in aqueous solution at 25 °C and pH 8.5 were quantified by electrospray ionization mass spectrometry (ESI‐MS). Association constants (K_a) for MMP binding to four FAs (myristic acid, palmitic acid, stearic acid and trans‐parinaric acid) were measured by using an indirect ESI‐MS assay, the “proxy protein” method. The K_a values are in the 10⁴–10⁵ M ^?1 range and, based on results obtained for the binding of the synthetic MMPs with palmitic acid, increase with the size of the carbohydrate. Notably, the measured affinity of the extracted MMPs for trans‐parinaric acid is two orders of magnitude smaller than the reported value, which was determined by using a fluorescence assay. Using a newly developed competitive binding assay, referred to as the “proxy protein/proxy ligand” ESI‐MS method, it was shown that MMPs bind specifically to NAs in aqueous solution, with apparent affinities of approximately (5×10⁴) M ^?1 for the mixture of NAs tested. This represents the first demonstration that MMPs can bind to hydrophobic species more complex than those containing linear alkyl/alkenyl chains. Moreover, the approach developed here represents a novel method for probing carbohydrate–lipid interactions.     

Synthesis and Study of Cationic,Two‐Coordinate Triphenylphosphine– Gold–π Complexes

Cationic, two‐coordinate triphenylphosphine–gold(I)–π complexes of the form [(PPh₃)Au(π ligand)]⁺ SbF₆^? (π ligand=4‐methylstyrene, 1? SbF₆), 2‐methyl‐2‐butene ( 3? SbF₆), 3‐hexyne ( 6? SbF₆), 1,3‐cyclohexadiene ( 7? SbF₆), 3‐methyl‐1,2‐butadiene ( 8? SbF₆), and 1,7‐diphenyl‐3,4‐heptadiene ( 10? SbF₆) were generated in situ from reaction of [(PPh₃)AuCl], AgSbF₆, and π ligand at ?78 °C and were characterized by low‐temperature, multinuclear NMR spectroscopy without isolation. The π ligands of these complexes were both weakly bound and kinetically labile and underwent facile intermolecular exchange with free ligand (ΔG^≠≈9 kcal mol^?1 in the case of 6? SbF₆) and competitive displacement by weak σ donors, such as trifluoromethane sulfonate. Triphenylphosphine–gold(I)–π complexes were thermally unstable and decomposed above ?20 °C to form the bis(triphenylphosphine) gold cation [(PPh₃)₂Au]⁺SbF₆^? ( 2? SbF₆).     

Self‐Assembly of Perovskite CsPbBr3 Quantum Dots Driven by a Photo‐Induced Alkynyl Homocoupling Reaction

Herein, we report the facile growth of three‐dimensional CsPbBr₃ perovskite supercrystals (PSCs) self‐assembled from individual CsPbBr₃ perovskite quantum dots (PQDs). By varying the carbon chain length of a surface‐bound ligand molecule, 1‐alkynyl acid, different morphologies of PSCs were obtained accompanied by an over 1000‐fold photoluminescence improvement compared with that of PQDs. Systematic analyses have shown, for the first time, that under UV irradiation, CsBr, the byproduct formed during PQDs synthesis, could effectively catalyze the homocoupling reaction between two alkynyl groups, which further worked as a driving force to push forward the self‐assembly of PQDs.     

Electron Capture by the Thiyl Radical and Disulfide Bond: Ligand Effects on the Reduction Potential

The effect of non‐polar and polar ligands and of monovalent cations on the one‐electron reduction potential of the thiyl radical and the disulfide bond was evaluated. The reduction potentials E° for the CH₃S^.–n L/CH₃S^?–n L and CH₃SSCH₃–L/CH₃SSCH₃^.?–L redox couples were calculated at the B3LYP, M06‐2X and MP2 levels of theory, with n=1, 2 and L=CH₄, C₂H₄, H₂O, CH₃OH, NH₃, CH₃COOH, CH₃CONH₂, NH₄⁺, Na⁺, K⁺ and Li⁺. Non‐polar ligands decrease the E° value of the thiyl radical and disulfide bond, while neutral polar ligands favour electron uptake. Charged polar ligands and cations favour electron capture by the thiyl radical while disfavouring electron uptake by the disulfide bond. Thus, the same type of ligand can have a different effect on E° depending on the redox couple. Therefore, properties of an isolated ligand cannot uniquely determine E°. The ligand effects on E° are discussed in terms of the vertical electron affinity and reorganization energy, as well as molecular orbital theory. For a given redox couple, the ligand type influences the nature of the anion formed upon electron capture and the corresponding reorganization process towards the reduced geometry.     

Fast and Tight Boronate Formation for Click Bioorthogonal Conjugation

A new click bioorthogonal reaction system was devised to enable the fast ligation (k_ON≈340 m ^?1 s^?1) of conjugatable derivatives of a rigid cyclic diol (nopoldiol) and a carefully optimized boronic acid partner, 2‐methyl‐5‐carboxymethylphenylboronic acid. Using NMR and fluorescence spectroscopy studies, the corresponding boronates were found to form reversibly within minutes at low micromolar concentration in water, providing submicromolar equilibrium constant (K_eq≈10⁵–10⁶ m ^?1). Efficient protein conjugation under physiological conditions was demonstrated with model proteins thioredoxin and albumin, and characterized by mass spectrometry and gel electrophoresis.     

Glycine-Functionalized CsPbBr3 Nanocrystals for Efficient Visible-Light Photocatalysis of CO2 Reduction

Capping ligands are indispensable for the preparation of metal-halide-perovskite (MHP) nanocrystals (NCs) with good stability; however, the long alkyl-chain capping ligands in conventional MHP NCs will be unfavorable for CO₂ adsorption and hinder the efficient carrier separation on the surface of MHP NCs, leading to inferior catalytic activity in artificial photosynthesis. Herein, CsPbBr₃ nanocrystals with short-chain glycine as ligand are constructed through a facile ligand-exchange strategy. Owing to the reduced hindrance of glycine and the presence of the amine group in glycine, the photogenerated carrier separation and CO₂ uptake capacity are noticeably improved without compromising the stability of the MHP NCs. The CsPbBr₃ nanocrystals with glycine ligands exhibit a significantly increased yield of 27.7 μmol g⁻¹ h⁻¹ for photocatalytic CO₂-to-CO conversion without any organic sacrificial reagents, which is over five times higher than that of control CsPbBr₃ NCs with conventional long alkyl-chain capping ligands.     

Determination of ζ‐potential,charge, and number of organic ligands on the surface of water soluble quantum dots by capillary electrophoresis

The number of charges and/or organic ligands covalently attached to the surface of CdTe quantum dot nanoparticles has been determined from their electrophoretic mobilities measured in capillaries filled with free electrolyte buffers. Three sizes of water soluble CdTe quantum dots with 3‐mercaptopropionic and thioglycolic acids as surface ligands were prepared. Their electrophoretic mobilities in different pH and ionic strength values of separation buffers were measured by capillary electrophoresis with laser induced fluorescence detection. The ζ‐potentials determined from electrophoretic mobilities using analytical solution of Henry function proposed by Ohshima were in the range from ?30 to ?100 mV. Charges of QDs were calculated from ζ‐potentials. As a result, numbers of organic ligands bonded to QDs surface were determined to be 13, 14, and 15 for the sizes of 3.1, 3.5, and 3.9 nm, respectively. The dissociation constants of organic ligands bonded on QDs surfaces estimated from the dependence of QDs charge on pH of the separation buffer were 7.8 and 7.9 for 3‐mercaptopropionic acid and 6.9 for thioglycolic acid.     

THE EQUILIBRIA AND KINETICS OF THE COMPLEX FORMATION BETWEEN Fe(III) AND TARTARIC AND CITRIC ACIDS

Abstract

The equilibria and kinetics of formation of 1 : 1 iron(III) complexes with tartaric and citric acids have been studied in the pH range 1.0–2.0 in aqueous alcoholic perchlorate media. The equilibrium constants for the reactions Fe³⁺ +

H₄L^keq Complex + nH⁺ were obtained from spectrophotometric measurements in the wavelength range 360–420 nm. The values of K _eq determined at 20°, μ=1.0 M (water 100%), were 0.21 M with n=2 for tartaric and 0.0186 M² with n=3 for citric acid. The stoichiometry of the complex formation and the reaction sites of the ligands were discussed with reference to previous findings on ligands of related structures. The kinetics of the reactions were carried out by the stopped-flow technique. From the hydrogen ion dependence of the reaction rates it can be shown that complex formation occurs between FeOH²⁺ and differently protonated forms of the ligands. Forward rates for the different paths are consistent with an SN1 IP interaction in agreement with the Eigen mechanism; forward and reverse rate quotients enabled the evaluation of the equilibrium constants which agreed satisfactorily with the spectrophotometric ones. The effect of varying the solvent composition (water-alcohol) was discussed with reference to the reaction mechanism.     

Breaking the Semi‐Quinoid Structure: Spin‐Switching from Strongly Coupled Singlet to Polarized Triplet State

2,7‐TMPNO (4,5,9,10‐tetramethoxypyrene‐2,7‐bis(tert‐butylnitroxide)) was found to exist in semi‐quinoid form with unprecedented strong intramolecular magnetic exchange interaction of 2 J/k_B=1185 K operating over a distance of 10 Å. Structural transformations with the activation energy of ΔE_eq=949 K were observed by varying the temperature, from more quinoid structure at low temperature to more biradicaloid structure at higher temperature. Moreover, this molecule undergoes a transient spin transition from singlet to polarized triplet state upon photoexcitation revealed by TREPR spectroscopy. The spin Hamiltonian parameters were determined to be S=1, g=2.0065, D=?0.0112 cm^?1, and E=?0.0014 cm^?1 by spectral simulation with the hybrid Eigenfield/exact diagonalization method.