Ceria–Zirconia Particles Wrapped in a 2D Carbon Envelope: Improved Low‐Temperature Oxygen Transfer and Oxidation Activity

Engineering the interface between different components of heterogeneous catalysts at nanometer level can radically alter their performances. This is particularly true for ceria‐based catalysts where the interactions are critical for obtaining materials with enhanced properties. Here we show that mechanical contact achieved by high‐energy milling of CeO₂–ZrO₂ powders and carbon soot results in the formation of a core of oxide particles wrapped in a thin carbon envelope. This 2D nanoscale carbon arrangement greatly increases the number and quality of contact points between the oxide and carbon. Consequently, the temperatures of activation and transfer of the oxygen in ceria are shifted to exceptionally low temperatures and the soot combustion rate is boosted. The study confirms the importance of the redox behavior of ceria‐zirconia particles in the mechanism of soot oxidation and shows that the organization of contact points at the nanoscale can significantly modify the reactivity resulting in unexpected properties and functionalities.     

Confined Ultrathin Pd‐Ce Nanowires with Outstanding Moisture and SO2 Tolerance in Methane Combustion

An efficient strategy (enhanced metal oxide interaction and core–shell confinement to inhibit the sintering of noble metal) is presented confined ultrathin Pd‐CeO_x nanowire (2.4 nm) catalysts for methane combustion, which enable CH₄ total oxidation at a low temperature of 350 °C, much lower than that of a commercial Pd/Al₂O₃ catalyst (425 °C). Importantly, unexpected stability was observed even under harsh conditions (800 °C, water vapor, and SO₂), owing to the confinement and shielding effect of the porous silica shell together with the promotion of CeO₂. Pd‐CeO_x solid solution nanowires (Pd‐Ce NW) as cores and porous silica as shells (Pd‐CeNW@SiO₂) were rationally prepared by a facile and direct self‐assembly strategy for the first time. This strategy is expected to inspire more active and stable catalysts for use under severe conditions (vehicle emissions control, reforming, and water–gas shift reaction).     

l‐Arginine‐Triggered Self‐Assembly of CeO2 Nanosheaths on Palladium Nanoparticles in Water

Pd@CeO₂ core–shell nanostructures with a tunable Pd core size, shape, and nanostructure as well as a tunable CeO₂ sheath thickness were obtained by a biomolecule‐assisted method. The synthetic process is simple and green, as it involves only the heating of a mixture of Ce(NO₃)₃, l ‐arginine, and preformed Pd seeds in water without additives. Importantly, the synthesis is free of thiol groups and halide ions, thus providing a possible solution to the problem of secondary pollution by Pd nanoparticles in the sheath‐coating process. The Pd/CeO₂ nanostructures can be composited well with γ‐Al₂O₃ to create a heterogeneous catalyst. In subsequent tests of catalytic NO reduction by CO, Pd@CeO₂/Al₂O₃ samples based on Pd cubes (6, 10, and 18 nm), Pd octahedra (6 nm), and Pd cuboctahedra (9 nm) as well as a simply loaded Pd cube (6 nm)–CeO₂/Al₂O₃ sample were used as catalysts to investigate the effects of the Pd core size and shape and the hybrid nanostructure on the catalytic performance.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

Bis[S‐benzyl‐3‐(4‐n‐octyloxybenzylidene)dithiocarbazato‐κ2N3,S′]palladium(II)

In the title compound, [Pd(C₂₃H₂₉N₂OS₂)₂], the Pd^II atom displays the expected square‐planar coordination geometry. However, the trans configuration, which allows the Pd^II atom to be located on a crystallographic inversion centre, is unusual with respect to the cis arrangement found in analogous Pd complexes comprising similar N,S‐chelating ligands.     

Nitrogen‐doped graphene‐cerium oxide (NG‐CeO2) photocatalyst for the photodegradation of methylene blue in waste water

This study shows a facile approach for the preparation of CeO₂ nanoparticles decorated with porous nitrogen‐doped graphene (NG) nanosheets for effective photocatalytic degradation of methylene blue (MB). NG nanosheets were first synthesized using a hydrothermal method and then nitrogen‐doped graphene‐cerium oxide (NG‐CeO₂) was prepared through mixing of cerium nitrate with different concentrations of NG under ultrasonication followed by hydrothermal treatment. The synthesized nanocomposites were characterized using X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE‐SEM). The photocatalytic activity of the synthesized nanocomposites was analyzed against MB dye. Results showed that the nanocomposites of NG‐CeO₂ have an average particle size of 20 nm. The as‐prepared NG‐CeO₂ nanocomposites exhibited outstanding photocatalytic activity for dye degradation under visible light irradiation, which could be attributed to synergistic effects between the NG nanosheets and CeO₂. The quantum of photodegradation increases with the increase of the NG content in the nanocomposites.     

Synthesis of regioregular poly(3‐octylthiophene)s via Suzuki polycondensation and end‐group analysis by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Regioregular poly(3‐octylthiophene)s were synthesized through a palladium‐catalyzed Suzuki polycondensation of 2‐(5‐iodo‐4‐octyl‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane. The effects of the palladium catalyst {tetrakis(triphenylphosphine)palladium(0) [Pd(PPh₃)₄], palladium(II) acetate [Pd(OAc)₂], [1, 1′‐bis(diphenylphosphino)ferrocene]dichloropalladium(II) [Pd(dppf)Cl₂], tris(dibenzylideneacetone)dipalladium(0), or bis(triphenylphosphine)palladium(II) dichloride [Pd(PPh₃)₂Cl₂]} and the reaction conditions (bases and solvents) were investigated. NMR spectroscopy revealed that poly(3‐octylthiophene)s prepared via this route were essentially regioregular. According to size exclusion chromatography, the highest molecular weights were obtained with in situ generated Pd(PPh₃)₄ and tetrakis(tri‐o‐tolylphosphine]palladium(0) {Pd[P(o‐Tol)₃]₄} catalysts or more reactive, phosphine‐free Pd(OAc)₂. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry was used to analyze end groups and allowed the determination of some mechanistic aspects of the Suzuki polycondensation. The polymers were commonly terminated with hydrogen or iodine as a result of deboronation and some deiodination. Pd(PPh₃)₄, Pd(PPh₃)₂Cl₂, and Pd[P(o‐Tol)₃]₄ induced aryl–aryl exchange reactions with the palladium center and resulted in some chains having phenyl‐ and o‐tolyl‐capped chain ends. Pd(dppf)Cl₂ yielded only one type of chain, and it had hydrogen end groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1454–1462, 2005     

1‐Ferrocenylmethyl‐3‐(2,4,6‐trimethylbenzyl)‐1H‐imidazolidin‐3‐ium iodide and trans‐bis(3‐benzyl‐1‐ferrocenylmethyl‐1H‐imidazolidin‐2‐ylidene)diiodidopalladium(II)

Owing to increasing interest in the use of N‐heterocyclic carbenes (NHCs) based on imidazolidinium ions as ligands in the design of highly efficient transition‐metal‐based homogeneous catalysts, the characterizations of the 1‐ferrocenylmethyl‐3‐(2,4,6‐trimethylbenzyl)imidazolidin‐3‐ium iodide salt, [Fe(C₅H₅)(C₁₉H₂₄N₂)]I, (I), and the palladium complex trans‐bis(3‐benzyl‐1‐ferrocenylmethyl‐1H‐imidazolidin‐2‐ylidene)diiodidopalladium(II), [Fe₂Pd(C₅H₅)₂(C₁₆H₁₇N₂)₂I₂], (II), are reported. Compound (I) has two iodide anions and two imidazolidinium cations within the asymmetric unit (Z′ = 2). The two cations have distinctly different conformations, with the ferrocene groups orientated exo and endo with respect to the N‐heterocyclic carbene. Weak C—H donor hydrogen bonds to both the iodide anions and the π system of the mesitylene group combine to form two‐dimensional layers perpendicular to the crystallographic c direction. Only one of the formally charged imidazolidinium rings forms a near‐linear hydrogen bond with an iodide anion. Complex (II) shows square‐planar coordination around the Pd^II metal, which is located on an inversion centre (Z′ = 0.5). The ferrocene and benzyl substituents are in a trans–anti arrangement. The Pd—C bond distance between the N‐heterocyclic carbene ligands and the metal atom is 2.036 (7) Å. A survey of related structures shows that the lengthening of the N—C bonds and the closure of the N—C—N angle seen here on metal complexation is typical of similar NHCs and their complexes.     

Enhanced catalytic performance of Pd‐Ga bimetallic catalysts for 2‐ethylanthraquinone hydrogenation

A series of Pd and Pd‐Ga bimetallic catalysts were prepared by a co‐impregnation method for 2‐ethylanthraquinone (EAQ) hydrogenation to produce hydrogen peroxide. Compared with 0.6Pd catalyst, the hydrogenation efficiency of 0.6Pd1.2Ga catalyst (11.9 g L^?1) increases by 32.2%, and the stability of 0.6Pd1.2Ga catalyst is also higher than that of 0.6Pd catalyst. The structures of the samples were determined by N₂ adsorption–desorption, ICP, XRD, CO chemisorption, TEM, H₂‐TPR, in situ CO‐DRIFTS and XPS. The results suggest that incorporation of Ga species improves Pd dispersion and generates a strong interaction between Ga₂O₃ and Pd interface or between Pd and support. DFT calculation results indicate that the strong adsorption of carbonyl group on Ga₂O₃/Pd interface facilitates the activation of EAQ and promotes the hydrogenation efficiency.     

Synthesis of (−)‐Erythrodiene and (+)‐7‐Epispirojatamol via Intramolecular Pd‐Catalyzed Allylzincation

Two spirobicyclic sesquiterpenoids, (−)‐erythrodiene ( 1 ) and (+)‐7‐epispirojatamol ( 30 ), were synthesized in enantiomerically pure form via an intramolecular allylzincation process. The allylzinc species were formed in the presence of Et₂Zn via transmetallation of a catalytically generated allylpalladium intermediate. Several Pd catalysts were tested for this transformation, and [Pd(OAc)₂]/Bu₃P (1 equiv.) was found to be, by far, the most effective. Whereas the preparation of 1 involved allylzincation of a tethered terminal olefin, 30 was formed via a novel intramolecular allyl zincation of a methyl ketone. Both reactions showed the same stereochemical preference, yielding the spirobicyclic products in 95 : 5 and 4 : 1 diastereoisomer ratios, respectively.     

A trinuclear palladium(II) complex containing N,S‐coordinating 2‐(benzylsulfanyl)anilinide and 1,3‐benzothiazole‐2‐thiolate ligands with a central square‐planar PdN4 motif

The reaction of dichlorido(cod)palladium(II) (cod = 1,5‐cyclooctadiene) with 2‐(benzylsulfanyl)aniline followed by heating in N,N‐dimethylformamide (DMF) produces the linear trinuclear Pd₃ complex bis(μ₂‐1,3‐benzothiazole‐2‐thiolato)bis[μ₂‐2‐(benzylsulfanyl)anilinido]dichloridotripalladium(II) N,N‐dimethylformamide disolvate, [Pd₃(C₇H₄NS₂)₂(C₁₃H₁₂NS)₂Cl₂]·2C₃H₇NO. The molecule has symmetry and a Pd...Pd separation of 3.2012 (4) Å. The outer Pd^II atoms have a square‐planar geometry formed by an N,S‐chelating 2‐(benzylsulfanyl)anilinide ligand, a chloride ligand and the thiolate S atom of a bridging 1,3‐benzothiazole‐2‐thiolate ligand, while the central Pd^II core shows an all N‐coordinated square‐planar geometry. The geometry is perfectly planar within the PdN₄ core and the N—Pd—N bond angles differ significantly [84.72 (15)° for the N atoms of ligands coordinated to the same outer Pd atom and 95.28 (15)° for the N atoms of ligands coordinated to different outer Pd atoms]. This trinuclear Pd₃ complex is the first example of one in which 1,3‐benzothiazole‐2‐thiolate ligands are only N‐coordinated to one Pd centre. The 1,3‐benzothiazole‐2‐thiolate ligands were formed in situ from 2‐(benzylsulfanyl)aniline.     

Controllable Synthesis of Nearly Monodisperse Spherical Aggregates of CeO2 Nanocrystals and Their Catalytic Activity for HCHO Oxidation

Herein, we report a facile surfactant‐assisted solvothermal synthetic method to prepare nearly monodisperse spherical CeO₂ nanocrystals. A good control of the size of CeO₂ nanocrystals in the range of 100–500 nm was achieved by simply varying the synthetic parameters such as reaction time, volume ratio of ethanol to water (R), molar ratio of PVP, and concentration of Ce(NO₃)₃?6 H₂O in solution. A possible mechanism for the growth of spherical CeO₂ nanocrystals is proposed. The obtained CeO₂ nanocrystals with a surface area of up to 47 m²g^?1 were then employed as a catalyst support. By loading Au‐Pd nanoparticles (about 3 wt. %) onto the CeO₂ support, an Au‐Pd/CeO₂ catalyst was prepared that exhibited high catalytic activity for HCHO oxidation. At the low temperature of 50 °C, the percentage of HCHO conversion was 100 %, suggesting potential applications in preferential oxidation and other catalytic reactions. These Au‐Pd/CeO₂ catalysts may also find applications in indoor formaldehyde decontamination and industrial catalysis. The facile solvothermal method can be extended to the preparation of other metal oxide nanocrystals and provides guidance for size‐ and morphology‐controlled synthesis.     

Investigation of Suzuki–Miyaura catalyst‐transfer polycondensation of AB‐type fluorene monomer using coordination‐saturated aryl Pd(II) halide complexes as initiators

Novel triarylamine‐based coordination‐saturated aryl Pd(II) halide complexes ligated by PEt₃, PCy₃, and P(o‐tol)₃ were successfully synthesized by direct oxidative addition of aryl halide to the corresponding Pd(0) precursors. Suzuki–Miyaura coupling polymerization of 2‐(7‐halide‐9,9‐dioctylfluoren‐2‐yl)?1,3,2‐dioxaborinane with these Pd(II) complexes as initiators was investigated for the synthesis of poly(fluorene)s with triarylamine end group. Pd(II) complexes with PCy₃ or P(o‐tol)₃ exhibited catalytic activity and realized the catalyst‐transfer polycondensation at 75 °C and room temperature, respectively, while the polymerization using Pd(II) catalyst ligated by PEt₃ did not proceed, which indicated that the bulky phosphine ligands could facilitate the reductive elimination and further promote the polymerization. In addition, the dimeric Pd(II) complex with P(o‐tol)₃ can convert into monomeric Pd(II) intermediate with an open coordination site, which had a higher activity. The end groups of the afforded polyfluorene were analyzed by matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectrometry, in which the Ar/H end groups are indicative of the catalyst‐transfer polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1457–1463     

Synthesis,Structure and Noncovalent Interactions Palladium（Ⅱ）Complexes with N—Benzoyl—β—phenylalaniate Dianion and Aromatic Diimine

Two palladium(II) complexes, [Pd(bipy)(BzPhe‐N,O)] and [Pd(phen)(BzPhe‐N,O)]·4H₂O were synthesized by reactions between Pd(bipy)Cl₂ and BzPheH₂ (N‐benzoyl‐β‐phenylalanine), Pd(phen) Cl₂ and BzPheH₂ in water at pH‐9, with their structures determined by X‐ray diffraction analysis. The Pd atom is coordinated by two nitrogen atoms of bipy (or phen), the deprotonated amido type nitrogen atom and one of the carboxylic oxygens of BzPhe (BzPhe = N‐benzoyl‐β‐phenylalaninate dianion). In the complex [Pd(phen) (BzFne‐N,O)] · 4H₂O, the side chain of phenylalanine is located above and approximately parallels to the coordination plane. Both the aromatic‐aromatic stacking interaction between the phenyl ring of phenylalanine and phen, and the metal ion‐aromatic interaction between the phenyl ring of phenylalanine and Pd(II) were observed. [Pd(bipy)(BzPhe‐N,O)] has the phenylalanyl side chain oriented outwards from the coordination plane, which is mainly due to the interaction between the carbonyl oxygen atom of the amido group and the phenyl ring of phenylalanine. The reason for the different orientation of phenylalanyl side chain in the complexes was suggested.     

Synthesis and Self‐Assembly of NCN‐Pincer Pd‐Complex‐Bound Norvalines

The NCN‐pincer Pd‐complex‐bound norvalines Boc‐D /L ‐[PdCl(dpb)]Nva‐OMe ( 1 ) were synthesized in multigram quantities. The molecular structure and absolute configuration of 1 were unequivocally determined by single‐crystal X‐ray structure analysis. The robustness of 1 under acidic/basic conditions provides a wide range of N‐/C‐terminus convertibility based on the related synthetic transformations. Installation of a variety of functional groups into the N‐/C‐terminus of 1 was readily carried out through N‐Boc‐ or C‐methyl ester deprotection and subsequent condensations with carboxylic acids, R¹COOH, or amines, R²NH₂, to give the corresponding N‐/C‐functionalized norvalines R¹‐D /L ‐[PdCl(dpb)]Nva‐R² 2 – 9 . The dipeptide bearing two Pd units 10 was successfully synthesized through the condensation of C‐free 1 with N‐free 1 . The robustness of these Pd‐bound norvalines was adequately demonstrated by the preservation of the optical purity and Pd unit during the synthetic transformations. The lipophilic Pd‐bound norvalines L ‐ 2 , Boc‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, and L ‐ 4 , n‐C₄H₉CO‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, self‐assembled in aromatic solvents to afford supramolecular gels. The assembled structures in a thermodynamically stable single crystal of L ‐ 2 and kinetically stable supramolecular aggregates of L ‐ 2 were precisely elucidated by cryo‐TEM, WAX, SAXS, UV/Vis, IR analyses, and single‐crystal X‐ray crystallography. An antiparallel β‐sheet‐type aggregate consisting of an infinite one‐dimensional hydrogen‐bonding network of amide groups and π‐stacking of PdCl(dpb) moieties was observed in the supramolecular gel fiber of L ‐ 2 , even though discrete dimers are assembled through hydrogen bonding in the thermodynamically stable single crystal of L ‐ 2 . The disparate DSC profiles of the single crystal and xerogel of L ‐ 2 indicate different thermodynamics of the molecular assembly process.     

Pt Nanoparticles Supported on Nitrogen‐Doped‐Carbon‐Decorated CeO2 for Base‐Free Aerobic Oxidation of 5‐Hydroxymethylfurfural

Currently, the base‐free aerobic oxidation of biomass‐derived 5‐hydroxymethylfurfural (HMF) to produce 2,5‐furandicarboxylic acid (FDCA) is attracting intense interest due to its prospects for the green, sustainable, and promising production of biomass‐based aromatic polymers. Herein, we have developed a new Pt catalyst supported on nitrogen‐doped‐carbon‐decorated CeO₂ (NC‐CeO₂) for the aerobic oxidation of HMF in water without the addition of any homogeneous base. It was demonstrated that the small‐sized Pt particles could be well dispersed on the surface of the hybrid NC‐CeO₂ support, and the activity of the supported Pt catalyst depended strongly on the surface structure and properties of the catalysts. The as‐fabricated Pt/NC‐CeO₂ catalyst, with abundant surface defects, enhanced basicity, and favorable electron‐deficient metallic Pt species, enabled an almost 100 % yield of FDCA in water with molecular oxygen (0.4 MPa) at 110 °C for 8 h without the addition of any homogeneous base, which is indicative of exceptional catalytic performance. Furthermore, this Pt/NC‐CeO₂ catalyst also showed good stability and reusability owing to strong metal–support interactions. An understanding of the role of surface structural defects and basicity of the hybrid NC‐CeO₂ support provides a basis for the rational design of high‐performance and stable supported metal catalysts with practical applications in various transformations of biomass‐derived compounds.     

trans‐Bis(3,5‐di­aza‐1‐azonia‐7‐phosphaadamantane‐κP)­bis­(thiocyanato‐κS)­palladium(II) bis­(thio­cyanate)

The crystal structure of the title compound, trans‐[Pd(NCS)₂(C₆H₁₃N₃P)₂](NCS)₂, is one of the few pal­ladium(II) complexes containing two protonated water‐soluble 1,3,5‐tri­aza‐7‐phos­pha­adamantane (PTA) ligands re­ported to date. The compound displays a distorted square‐planar geometry, with the Pd atom on an inversion centre and with the S atoms of the thio­cyanate counter‐ions occupying the axial positions above and below the equatorial plane described by the phosphine and thio­cyanate ligands. Geometric parameters for the formal coordination polyhedron include a Pd—P distance of 2.2940 (8) Å, a Pd—S distance of 2.3509 (8) Å and a P—Pd—S angle of 89.45 (3)°. The effective cone angle for the PTA ligands was calculated as 114.5°.     

Short communication: An alternative and effective catalyst in the stereo‐specific reaction of Z‐1‐aryl‐1‐stannyl‐2‐silylethenes with allyl bromide

The Pd(dba)₂‐catalyzed reaction of Z‐1‐aryl‐1‐(tributylstannyl)‐2‐(trimethylsilyl)ethenes with allyl bromide in the presence of copper(I) iodide is reported for the first time. The reaction in the presence of 0.5 mol% Pd(dba)₂ and 8 mol% CuI in dimethylformamide takes place at room temperature to give E‐2‐aryl‐1‐(trimethylsilyl)penta‐1,4‐dienes exclusively in isolated yields of 62–99%. A putative reaction mechanism is proposed. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of syn‐2,4‐Dimercapto‐1,3,2,4‐dithiadigermetane and Its Application to Ge2PdS4 Cluster Synthesis

The sulfurization of DmpGeH₃ (Dmp=2,6‐dimesitylphenyl) afforded the trinuclear germanium sulfide [DmpGe(μ‐S)]₂(μ‐S)₂Ge(SH)‐Dmp and a series of polythiadigermabicyclo[x.1.1]alkanes (x=3, 4, 5). The reduction of the S? S bonds of these germabicycloalkanes by NaBH₄ at 0 °C afforded the dinuclear mercaptogermane syn‐[DmpGe(SH)(μ‐S)₂Ge(SH)‐Dmp] ( 5 ) in good yield. The reaction of [Pd(dppe)Cl₂] (dppe=1,2‐bis(diphenylphosphanyl)ethane) and the dilithium salt of 5 prepared in situ by the addition of nBuLi (2 equiv) gave the Ge₂PdS₄ cluster [DmpGe(μ‐S)]₂[(μ‐S)₂Pd(dppe)], in which the dithiadigermetanedithiolate is bound to the Pd atom at the two thiolato sulfur atoms. The same reaction with [Pd(PPh₃)₂Cl₂] gave another Ge₂PdS₄ cluster, [DmpGe(μ‐S)]₂[(μ‐S)₂Pd(PPh₃)], but with the dithiadigermetanedithiolate and the Pd center conjoined through a μ‐S atom between the two germanium atoms in addition to the two thiolato sulfur atoms to form a highly distorted cluster core. The formation of two different types of Ge₂PdS₄ clusters represents the usefulness of 5 in the synthesis of various polynuclear complexes composed of germanium and transition metals.     

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide is described. In the reaction with allyl bromide, either a Pd(dba)₂? CuI combination (dba, dibenzylideneacetone) in DMF or copper(I) iodide in DMSO–THF readily catalyzes or mediates the coupling reaction of (Z)‐silyl(stannyl)ethenes at room temperature, producing novel vinylsilanes bearing an allyl group β to silicon with cis ‐disposition in good yields. Allyl chlorides as halides can be used in the CuI‐mediated reaction. CuI alone much more effectively mediates the cross‐coupling reaction with propargyl bromide in DMSO–THF at room temperature compared with a Pd(dba)₂? CuI combination catalysis in DMF, providing novel stereodefined vinylsilanes bearing an allenyl group β to silicon with cis ‐disposition in good yields. Copyright © 2008 John Wiley & Sons, Ltd.