Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

A Facile Steam Reforming Strategy to Delaminate Layered Carbon Nitride Semiconductors for Photoredox Catalysis

The delamination of layered crystals that produces single or few‐layered nanosheets while enabling exotic physical and chemical properties, particularly for semiconductor functions in optoelectronic applications, remains a challenge. Here, we report a facile and green approach to prepare few‐layered polymeric carbon nitride (PCN) semiconductors by a one‐step carbon/nitrogen steam reforming reaction. Bulky PCN, obtained from typical precursors including urea, melamine, dicyandiamide, and thiourea, are exfoliated into few‐layered nanosheets, while engineering its surface carbon vacancies. The unique sheet structures with strengthened surface properties endow PCNs with more active sites, and an increased charge separation efficiency with a prolonged charge lifetime, drastically promoting their photoredox performance. After an assay of a H₂ evolution reaction, an apparent quantum yield of 11.3 % at 405 nm was recorded for the PCN nanosheets, which is much higher than those of PCN nanosheets. This delamination method is expandable to other carbon‐based 2D materials for advanced applications.     

Facile Synthesis of Ultrathin Lepidocrocite Nanosheets from Layered Precursors

Ultrathin two‐dimensional nanosheets have been widely studied because of their peculiar properties and promising applications. As a typical layered material, successful exfoliation of freestanding ultrathin lepidocrocite (γ‐FeOOH) nanosheets from the bulk material has not been reported to date. Herein, we report a facile synthetic route to prepare ultrathin lepidocrocite nanosheets with a thickness of approximately 2–3 nm from FeO_x–propanediol layered precursors through weakening of the hydrogen bonds during the crystallization process. The ultrathin morphology and single‐crystal structure of the nanosheets were confirmed by transmission electron microscopy, X‐ray diffraction, and atomic force microscopy. The formation process of these nanosheets demonstrated simultaneous exfoliation and crystallization of lepidocrocite in basic aqueous solution. The obtained ultrathin nanosheets exhibited a much lower Néel temperature (18.3 K) than bulk lepidocrocite and weak ferromagnetic behavior below this temperature.     

Two‐Dimensional Fullerene Assembly from an Exfoliated van der Waals Template

Two‐dimensional (2D) materials are commonly prepared by exfoliating bulk layered van der Waals crystals. The creation of synthetic 2D materials from bottom‐up methods is an important challenge as their structural flexibility will enable chemists to tune the materials properties. A 2D material was assembled using C₆₀ as a polymerizable monomer. The C₆₀ building blocks are first assembled into a layered solid using a molecular cluster as structure director. The resulting hierarchical crystal is used as a template to polymerize its C₆₀ monolayers, which can be exfoliated down to 2D crystalline nanosheets. Derived from the parent template, the 2D structure is composed of a layer of inorganic cluster, sandwiched between two monolayers of polymerized C₆₀. The nanosheets can be transferred onto solid substrates and depolymerized by heating. Electronic absorption spectroscopy reveals an optical gap of 0.25 eV, narrower than that of the bulk parent crystalline solid.     

Ultrathin FeSe2 Nanosheets: Controlled Synthesis and Application as a Heterogeneous Catalyst in Dye‐Sensitized Solar Cells

Two‐dimensional (2D) semiconducting nanosheets have emerged as an important field of materials, owing to their unique properties and potential applications in areas ranging from electronics to catalysis. However, the controlled synthesis of ultrathin 2D nanosheets remains a great challenge, due to the lack of an intrinsic driving force for anisotropic growth. High‐quality ultrathin 2D FeSe₂ nanosheets with average thickness below 7 nm have been synthesized on large scale by a facile solution method, and a formation mechanism has been proposed. Due to their favorable structural features, the as‐synthesized ultrathin FeSe₂ nanosheets exhibit excellent electrocatalytic activity for the reduction of triiodide to iodide and low charge‐transfer resistance at the electrolyte–electrode interface in dye‐sensitized solar cells (DSSCs). The DSSCs with FeSe₂ nanosheets as counter electrode material achieve a high power conversion efficiency of 7.53 % under a simulated solar illumination of 100 mW cm^?2 (AM 1.5), which is comparable with that of Pt‐based devices (7.47 %).     

Accurate Control of VS2 Nanosheets for Coexisting High Photoluminescence and Photothermal Conversion Efficiency

In two‐dimensional (2D) amorphous nanosheets, the electron–phonon coupling triggered by localization of the electronic state as well as multiple‐scattering feature make it exhibit excellent performance in optical science. VS₂ nanosheets, especially single‐layer nanosheets with controllable electronic structure and intrinsic optical properties, have rarely been reported owing to the limited preparation methods. Now, a controllable and feasible switching method is used to fabricate 2D amorphous VS₂ and partial crystallized 2D VO₂(D) nanosheets by altering the pressure and temperature of supercritical CO₂ precisely. Thanks to the strong carrier localization and the quantum confinement, the unique 2D amorphous structures exhibit full band absorption, strong photoluminescence, and outstanding photothermal conversion efficiency.     

Graphene Nanosheets as a Platform for the 2D Ordering of Metal Oxide Nanoparticles: Mesoporous 2D Aggregate of Anatase TiO2 Nanoparticles with Improved Electrode Performance

Graphene nanosheets are successfully applied as an effective platform for the 2D ordering of metal oxide nanoparticles. Mesoporous 2D aggregates of anatase TiO₂ nanoparticles are synthesized by the heat treatment of the uniformly hybridized nanocomposite of layered titanate–reduced graphene oxide (RGO) at elevated temperatures. The precursor layered titanate–RGO nanocomposite is prepared by self‐assembly of anionic RGO nanosheets and cationic TiO₂ nanosols. The calcination of the as‐prepared layered titanate–RGO nanocomposite at 500 °C induces a structural and morphological change of layered titanate nanoplates into anatase TiO₂ nanoparticles without significant modification of the RGO nanosheet. Increasing the heating temperature to 600 °C gives rise to elimination of the RGO component, leading to the formation of sheetlike porous aggregates of RGO‐free TiO₂ nanoparticles. The nanocomposites calcined at 500–700 °C display promising functionality as negative electrodes for lithium ion batteries. Among the present calcined derivatives, the 2D sheet‐shaped aggregate of TiO₂ nanoparticles obtained from calcination at 600 °C delivers the greatest specific discharge capacity with good capacity retention for all current density conditions applied. Such superior electrode performance of the nanocomposite calcined at 600 °C is attributable both to the improved stability of the crystal structure and crystal morphology of titania and to the enhancement of Li⁺ ion transport through the enlargement of mesopores. The present findings clearly demonstrate the usefulness of RGO nanosheets as a platform for 2D‐ordered superstructures of metal oxide nanoparticles with improved electrode performance.     

Supramolecularly Bonded Layered Heterostructures Exhibiting HER Activity

van der Waals heterostructures formed by 2D materials have attracted much attention in the last few years. Recently, 2D nanosheets linked by covalent bonds have been found to exhibit novel properties. In the present study we have investigated supramolecular layered heterostructures formed by nanosheets of MoS₂ with BC₇N, g‐C₃N₄ and graphene. These materials have been synthesized via a non‐covalent host–guest synthetic design using cucurbit[8]uril (CB[8]) hosts. In addition to offering reversible disassembly, these heterostructures show good visible‐light‐driven hydrogen evolution reaction (HER) activity as well as reasonable gas adsorption and other properties.     

Controllable Synthesis of Porphyrin‐Based 2D Lanthanide Metal–Organic Frameworks with Thickness‐ and Metal‐Node‐Dependent Photocatalytic Performance

Synthesizing 2D metal–organic frameworks (2D MOFs) in high yields and rational tailoring of the properties in a predictable manner for specific applications is extremely challenging. Now, a series of porphyrin‐based 2D lanthanide MOFs (Ln‐TCPP, Ln=Ce, Sm, Eu, Tb, Yb, TCPP=tetrakis(4‐carboxyphenyl) porphyrin) with different thickness were successfully prepared in a household microwave oven. The as‐prepared 2D Ln‐TCPP nanosheets showed thickness‐dependent photocatalytic performances towards photooxidation of 1,5‐dihydroxynaphthalene (1,5‐DHN) to synthesize juglone. Particularly, the Yb‐TCPP displayed outstanding photodynamic activity to generate O₂^? and ¹O₂. This work not only provides fundamental insights into structure designing and property tailoring of 2D MOFs nanosheets, but also pave a new way to improve the photocatalytic performance.     

The Rapid Exfoliation and Subsequent Restacking of Layered Titanates Driven by an Acid–Base Reaction

Two‐dimensional (2D) (hydro)oxide materials, that is, nanosheets, enable the preparation of advanced 2D materials and devices. The general synthesis route of nanosheets involves exfoliating layered metal (hydro)oxide crystals. This exfoliation process is considered to be time‐consuming, hindering their industrial‐scale production. Based on in situ exfoliation studies on the protonated layered titanate H_1.07Ti_1.73O₄?H₂O (HTO), it is now shown that ion intercalation‐assisted exfoliation driven by chemical reaction provides a viable and fast route to isolated nanosheets. Contrary to the general expectation, data indicate that direct exfoliation of HTO occurs within seconds after mixing of the reactants, instead of proceeding via a swollen state as previously thought. These findings reveal that ion intercalation‐assisted exfoliation driven by chemical reaction is a promising exfoliation route for large‐scale synthesis.     

Synthesis and Localized Photoluminescence Blinking of Lead‐Free 2D Nanostructures of Cs3Bi2I6Cl3 Perovskite

Two‐dimensional (2D) lead‐free halide perovskites have generated enormous perception in the field of optoelectronics due to their fascinating optical properties. However, an in‐depth understanding on their shape‐controlled charge‐carrier recombination dynamics is still lacking, which could be resolved by exploring the photoluminescence (PL) blinking behaviour at the single‐particle level. Herein, we demonstrate, for the first time, the synthesis of nanocrystals (NCs) and 2D nanosheets (NSs) of layered mixed halide, Cs₃Bi₂I₆Cl₃, by solution‐based method. We applied fluorescence microscopy and super‐resolution optical imaging at single‐particle level to investigate their morphology‐dependent PL properties. Narrow emission line widths and passivation of non‐radiative defects were evidenced for 2D layered nanostructures, whereas the activation of shallow trap states was recognized at 77 K. Interestingly, individual NCs were found to display temporal intermittency (blinking) in PL emission. On the other hand, NS showed temporal PL intensity fluctuations within localized domains of the crystal. In addition, super‐resolution optical image of the NS from localization‐based method showed spatial inhomogeneity of the PL intensity within perovskite crystal.     

Two‐Dimensional CuSe Nanosheets with Microscale Lateral Size: Synthesis and Template‐Assisted Phase Transformation

Semiconducting nanosheets with microscale lateral size are attractive building blocks for the fabrication of electronic and optoelectronic devices. The phase‐controlled chemical synthesis of semiconducting nanosheets is of particular interest, because their intriguing properties are not only related to their size and shape, but also phase‐dependent. Herein, a facile method for the synthesis of phase‐pure, microsized, two‐dimensional (2D) CuSe nanosheets with an average thickness of approximately 5 nm is demonstrated. These hexagonal‐phased CuSe nanosheets were transformed into cubic‐phased Cu_2?xSe nanosheets with the same morphology simply by treatment with heat in the presence of Cu^I cations. The phase transformation, proposed to be a template‐assisted process, can be extended to other systems, such as CuS and Cu_1.97S nanoplates. Our study offers a new method for the phase‐controlled preparation of 2D nanomaterials, which are not readily accessible by conventional wet‐chemical methods.     

Unique Properties of 2 D Layered Titanate Nanosheets as a Building Block for the Optimization of the Photocatalytic Activity and Photostability of TiO2‐Based Nanohybrids

In comparison with the hybridization with 0D TiO₂ nanoparticle, 2D layered TiO₂ nanosheets are much more effective in the improvement of the photocatalytic activity and photostability of semiconducting compounds. The 2D TiO₂–Ag₃PO₄ nanohybrid described in this paper shows a greater decrease in the electron‐hole recombination upon hybridization and a stronger chemical interaction between the components than the 0D homologue. This result confirms the benefits of 2D layered TiO₂ nanosheets as a building block for efficient hybrid‐type photocatalyst materials.     

Single- and few-layer 2H-SnS2 and 4H-SnS2 nanosheets for high-performance photodetection

The properties of two-dimensional（2D） materials are highly dependent on their phase and thickness. Various phases exist in tin disulfide（SnS₂）, resulting in promising electronic and optical properties. Hence,accurately identifying the phase and thickness of SnS₂ nanosheets is prior to their optoelectronic applications. Herein, layered 2H-SnS₂ and 4H-SnS₂ crystals were grown by chemical vapor transportation and the crystalline phase of SnS₂ w...     

Solution‐Processed Two‐Dimensional MoS2 Nanosheets: Preparation,Hybridization, and Applications

As one member of the emerging class of ultrathin two‐dimensional (2D) transition‐metal dichalcogenide (TMD) nanomaterials, the ultra‐thin MoS₂ nanosheet has attracted increasing research interest as a result of its unique structure and fascinating properties. Solution‐phase methods are promising for the scalable production, functionalization, hybridization of MoS₂ nanosheets, thus enabling the widespread exploration of MoS₂‐based nanomaterials for various promising applications. In this Review, an overview of the recent progress of solution‐processed MoS₂ nanosheets is presented, with the emphasis on their synthetic strategies, functionalization, hybridization, properties, and applications. Finally, the challenges and opportunities in this research area will be proposed.     

A Photochemical Route towards Metal Sulfide Nanosheets from Layered Metal Thiolate Complexes

Synthesizing nanomaterials with anisotropic architectures, especially two‐dimensional (2D) nanosheets (NSs), is a key focus of materials science research. Metal sulfide nanosheets (MSNSs) are typically obtained involving exfoliation of bulk metal sulfides with layered structures. The synthesis of NSs of intrinsically non‐layered metal sulfides has received relatively less attention. Metal alkanethiolates with lamellar structures are now shown to serve as effective scaffolds for constructing NSs. A novel photochemical step was employed to transform 2D metal thiolates into MSNSs. By this strategy the 2D nature of metal thiolate precursors was preserved in the final products, resulting in the successful synthesis of NSs of binary PbS, CdS, and Cu₉S₅, as well as ternary wurtzite CuInS₂, Cu₂SnS₃. Results encourage the wider utilization of photochemical strategies in the synthesis of anisotropic MSNSs.     

Fast Exfoliation and Functionalisation of Two‐Dimensional Crystalline Carbon Nitride by Framework Charging

Two‐dimensional (2D) layered graphitic carbon nitride (gCN) nanosheets offer intriguing electronic and chemical properties. However, the exfoliation and functionalisation of gCN for specific applications remain challenging. We report a scalable one‐pot reductive method to produce solutions of single‐ and few‐layer 2D gCN nanosheets with excellent stability in a high mass yield (35 %) from polytriazine imide. High‐resolution imaging confirmed the intact crystalline structure and identified an AB stacking for gCN layers. The charge allows deliberate organic functionalisation of dissolved gCN, providing a general route to adjust their properties.     

Zeolitic Imidazolate Framework/Graphene Oxide Hybrid Nanosheets as Seeds for the Growth of Ultrathin Molecular Sieving Membranes

A defect‐free zeolitic imidazolate framework‐8 (ZIF‐8)/graphene oxide (GO) membrane with a thickness of 100 nm was prepared using two‐dimensional (2D) ZIF‐8/GO hybrid nanosheets as seeds. Hybrid nanosheets with a suitable amount of ZIF‐8 nanocrystals were essential for producing a uniform seeding layer that facilitates fast crystal intergrowth during membrane formation. Moreover, the seeding layer acts as a barrier between two different synthesis solutions, and self‐limits crystal growth and effectively eliminates defects during the contra‐diffusion process. The resulting ultrathin membranes show excellent molecular sieving gas separation properties, such as with a high CO₂/N₂ selectivity of 7.0. This 2D nano‐hybrid seeding strategy can be readily extended to the fabrication of other defect‐free and ultrathin MOF or zeolite molecular sieving membranes for a wide range of separation applications.     

Fe‐Doped Ni3C Nanodots in N‐Doped Carbon Nanosheets for Efficient Hydrogen‐Evolution and Oxygen‐Evolution Electrocatalysis

Uniform Ni₃C nanodots dispersed in ultrathin N‐doped carbon nanosheets were successfully prepared by carburization of the two dimensional (2D) nickel cyanide coordination polymer precursors. The Ni₃C based nanosheets have lateral length of about 200 nm and thickness of 10 nm. When doped with Fe, the Ni₃C based nanosheets exhibited outstanding electrocatalytic properties for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). For example, 2 at % Fe (atomic percent) doped Ni₃C nanosheets depict a low overpotential (292 mV) and a small Tafel slope (41.3 mV dec⁻¹) for HER in KOH solution. An outstanding OER catalytic property is also achieved with a low overpotential of 275 mV and a small Tafel slope of 62 mV dec⁻¹ in KOH solution. Such nanodot‐incorporated 2D hybrid structures can serve as an efficient bifunctional electrocatalyst for overall water splitting.     

Synthesis of Two‐dimensional Microporous Carbonaceous Polymer Nanosheets and Their Application as High‐performance CO2 Capture Sorbent

The synthesis of two‐dimensional (2D) polymer nanosheets with a well‐defined microporous structure remains challenging in materials science. Here, a new kind of 2D microporous carbonaceous polymer nanosheets was synthesized through polymerization of a very low concentration of 1,4‐dicyanobenzene in molten zinc chloride at 400–500 °C. This type of nanosheets has a thickness in the range of 3–20 nm, well‐defined microporosity, a high surface area (～537 m² g^?1), and a large micropore volume (～0.45 cm³ g^?1). The microporous carbonaceous polymer nanosheets exhibit superior CO₂ sorption capability (8.14 wt % at 298 K and 1 bar) and a relatively high CO₂ selectivity toward N₂ (25.6). Starting from different aromatic nitrile monomers, a variety of 2D carbonaceous polymer nanosheets can be obtained showing a certain universality of the ionothermal method reported herein.