Synthesis and structures of photoactive manganese–carbonyl complexes derived from 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole and 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole

PhotoCORMs (photo‐active CO‐releasing molecules) have emerged as a class of CO donors where the CO release process can be triggered upon illumination with light of appropriate wavelength. We have recently reported an Mn‐based photoCORM, namely [MnBr(pbt)(CO)₃] [pbt is 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole], where the CO release event can be tracked within cellular milieu by virtue of the emergence of strong blue fluorescence. In pursuit of developing more such trackable photoCORMs, we report herein the syntheses and structural characterization of two Mn^I–carbonyl complexes, namely fac‐tricarbonylchlorido[2‐(pyridin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′]manganese(I), [MnCl(C₁₂H₈N₂S)(CO)₃], (1), and fac‐tricarbonylchlorido[2‐(quinolin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′]manganese(I), [MnCl(C₁₆H₁₀N₂S)(CO)₃], (2). In both complexes, the Mn^I center resides in a distorted octahedral coordination environment. Weak intermolecular C—H…Cl contacts in complex (1) and Cl…S contacts in complex (2) consolidate their extended structures. These complexes also exhibit CO release upon exposure to low‐power broadband visible light. The apparent CO release rates for the two complexes have been measured to compare their CO donating capacity. The fluorogenic 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole and 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole ligands provide a convenient way to track the CO release event through the `turn‐ON' fluorescence which results upon de‐ligation of the ligands from their respective metal centers following CO photorelease.     

Synthesis and structures of photoactive rhenium carbonyl complexes derived from 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole, 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole and 1,10‐phenanthroline

Carbon monoxide (CO) has recently been identified as a gaseous signaling molecule that exerts various salutary effects in mammalian pathophysiology. Photoactive metal carbonyl complexes (photoCORMs) are ideal exogenous candidates for more controllable and site‐specific CO delivery compared to gaseous CO. Along this line, our group has been engaged for the past few years in developing group‐7‐based photoCORMs towards the efficient eradication of various malignant cells. Moreover, several such complexes can be tracked within cancerous cells by virtue of their luminescence. The inherent luminecscent nature of some photoCORMs and the change in emission wavelength upon CO release also provide a covenient means to track the entry of the prodrug and, in some cases, both the entry and CO release from the prodrug. In continuation of the research circumscribing the development of trackable photoCORMs and also to graft such molecules covalently to conventional delivery vehicles, we report herein the synthesis and structures of three rhenium carbonyl complexes, namely, fac‐tricarbonyl[2‐(pyridin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₂H₈N₂S)(CO)₃](CF₃SO₃), ( 1 ), fac‐tricarbonyl[2‐(quinolin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₆H₁₀N₂S)(CO)₃](CF₃SO₃), ( 2 ), and fac‐tricarbonyl[1,10‐phenanthroline‐κ²N ,N ′](4‐vinylpyridine‐κN )rhenium(I) trifluoromethanesulfonate, [Re(C₇H₇N)(C₁₂H₈N₂)(CO)₃](CF₃SO₃), ( 3 ). In all three complexes, the Re^I center resides in a distorted octahedral coordination environment. These complexes exhibit CO release upon exposure to low‐power UV light. The apparent CO release rates of the complexes have been measured to assess their comparative CO‐donating capacity. The three complexes are highly luminescent and this in turn provides a convenient way to track the entry of the prodrug molecules within biological targets.     

Catalytic CO Oxidation by O2 Mediated by Noble‐Metal‐Free Cluster Anions Cu2VO3–5−

Catalytic CO oxidation by molecular O₂ is an important model reaction in both the condensed phase and gas‐phase studies. Available gas‐phase studies indicate that noble metal is indispensable in catalytic CO oxidation by O₂ under thermal collision conditions. Herein, we identified the first example of noble‐metal‐free heteronuclear oxide cluster catalysts, the copper–vanadium bimetallic oxide clusters Cu₂VO_3–5^? for CO oxidation by O₂. The reactions were characterized by mass spectrometry, photoelectron spectroscopy, and density functional calculations. The dynamic nature of the Cu?Cu unit in terms of the electron storage and release is the driving force to promote CO oxidation and O₂ activation during the catalysis.     

Hydro­gen bonding in N,N′‐bis­[(1S)‐2‐azido‐1‐(2‐methyl­propyl)­ethyl]­oxal­amide: twofold symmetry of R(10) hydrogen‐bonded dimers connected into an α‐network

The title compound, C₁₄H₂₆N₈O₂, belongs to a class of retropeptides with an oxal­amide unit (–NH–CO–CO–NH–), and is a precursor for the synthesis of an amine‐terminal gelator. The compound is a good synthon for one‐dimensional hydrogen bonding. The crystal structure reveals a hydrogen‐bonded cyclic dimer with unusual twofold rotation symmetry.     

Anthraquinone Redox Relay for Dye‐Sensitized Photo‐electrochemical H2O2 Production

Anthraquinone (AQ) redox mediators are introduced to metal‐free organic dye sensitized photo‐electrochemical cells (DSPECs) for the generation of H₂O₂. Instead of directly reducing O₂ to produce H₂O₂, visible‐light‐driven AQ reduction occurs in the DSPEC and the following autooxidation with O₂ allows H₂O₂ accumulation and AQ regeneration. In an aqueous electrolyte, under 1 sun conditions, a water‐soluble AQ salt is employed with the highest photocurrent of up to 0.4 mA cm^?2 and near‐quantitative faradaic efficiency for producing H₂O₂. In a non‐aqueous electrolyte, under 1 sun illumination, an organic‐soluble AQ is applied and the photocurrent reaches 1.8 mA cm^?2 with faradaic efficiency up to 95 % for H₂O₂ production. This AQ‐relay DSPEC exhibits the highest photocurrent so far in non‐aqueous electrolytes for H₂O₂ production and excellent acid stability in aqueous electrolytes, thus providing a practical and efficient strategy for visible‐light‐driven H₂O₂ production.     

Structural comparison of group 7 tricarbonyl complexes of 2‐{[2‐(1H‐imidazol‐4‐yl)ethyl]iminomethyl}‐5‐methylphenolate

Two tricarbonyl complexes of rhenium(I) and manganese(I) coordinated by the ligand 2‐{[2‐(1H‐imidazol‐4‐yl)ethyl]iminomethyl}‐5‐methylphenolate are reported, viz. fac‐tricarbonyl(2‐{[2‐(1H‐imidazol‐4‐yl‐κN³)ethyl]iminomethyl‐κN}‐5‐methylphenolato‐κO)rhenium(I) methanol monosolvate, [Re(C₁₆H₁₄N₃O₄)(CO)₃]·CH₃OH, (I), and fac‐tricarbonyl(2‐{[2‐(1H‐imidazol‐4‐yl‐κN³)ethyl]iminomethyl‐κN}‐5‐methylphenolato‐κO)manganese(I), fac‐[Mn(C₁₆H₁₄N₃O₄)(CO)₃], (II), display facial coordination in a distorted octahedral environment. The crystal structure of (I) is stabilized by O—H...O, N—H...O and C—H...O hydrogen‐bond interactions, while that of (II) is stabilized by N—H...O hydrogen‐bond interactions only. These interactions result in two‐dimensional networks and π–π stacking for both structures.     

Polymorphism of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐ and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐ones

This study of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐2H‐chromen‐2‐one, C₁₇H₁₀N₂O₃, 1 , and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐one, C₁₆H₉N₃O₃, 2 , was performed on the assumption of the potential anticancer activity of the compounds. Three polymorphic structures for 1 and two polymorphic structures for 2 have been studied thoroughly. The strongest intermolecular interaction is stacking of the `head‐to‐head' type in all the studied crystals. The polymorphic structures of 1 differ with respect to the intermolecular interactions between stacked columns. Two of the polymorphs have a columnar or double columnar type of crystal organization, while the third polymorphic structure can be classified as columnar‐layered. The difference between the two structures of 2 is less pronounced. Both crystals can be considered as having very similar arrangements of neighbouring columns. The formation of polymorphic modifications is caused by a subtle balance of very weak intermolecular interactions and packing differences can be identified only using an analysis based on a study of the pairwise interaction energies.     

6‐Propyl‐2‐thiouracil versus 6‐methoxymethyl‐2‐thiouracil: enhancing the hydrogen‐bonded synthon motif by replacement of a methylene group with an O atom

The understanding of intermolecular interactions is a key objective of crystal engineering in order to exploit the derived knowledge for the rational design of new molecular solids with tailored physical and chemical properties. The tools and theories of crystal engineering are indispensable for the rational design of (pharmaceutical) cocrystals. The results of cocrystallization experiments of the antithyroid drug 6‐propyl‐2‐thiouracil (PTU) with 2,4‐diaminopyrimidine (DAPY), and of 6‐methoxymethyl‐2‐thiouracil (MOMTU) with DAPY and 2,4,6‐triaminopyrimidine (TAPY), respectively, are reported. PTU and MOMTU show a high structural similarity and differ only in the replacement of a methylene group (–CH₂–) with an O atom in the side chain, thus introducing an additional hydrogen‐bond acceptor in MOMTU. Both molecules contain an ADA hydrogen‐bonding site (A = acceptor and D = donor), while the coformers DAPY and TAPY both show complementary DAD sites and therefore should be capable of forming a mixed ADA/DAD synthon with each other, i.e. N—H…O, N—H…N and N—H…S hydrogen bonds. The experiments yielded one solvated cocrystal salt of PTU with DAPY, four different solvates of MOMTU, one ionic cocrystal of MOMTU with DAPY and one cocrystal salt of MOMTU with TAPY, namely 2,4‐diaminopyrimidinium 6‐propyl‐2‐thiouracilate–2,4‐diaminopyrimidine–N,N‐dimethylacetamide–water (1/1/1/1) (the systematic name for 6‐propyl‐2‐thiouracilate is 6‐oxo‐4‐propyl‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₇H₉N₂OS⁻·C₄H₆N₄·C₄H₉NO·H₂O, (I), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylformamide (1/1), C₆H₈N₂O₂S·C₃H₇NO, (II), 6‐methoxymethyl‐2‐thiouracil–N,N‐dimethylacetamide (1/1), C₆H₈N₂O₂S·C₄H₉NO, (III), 6‐methoxymethyl‐2‐thiouracil–dimethyl sulfoxide (1/1), C₆H₈N₂O₂S·C₂H₆OS, (IV), 6‐methoxymethyl‐2‐thiouracil–1‐methylpyrrolidin‐2‐one (1/1), C₆H₈N₂O₂S·C₅H₉NO, (V), 2,4‐diaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate (the systematic name for 6‐methoxymethyl‐2‐thiouracilate is 4‐methoxymethyl‐6‐oxo‐2‐sulfanylidene‐1,2,3,6‐tetrahydropyrimidin‐1‐ide), C₄H₇N₄⁺·C₆H₇N₂O₂S⁻, (VI), and 2,4,6‐triaminopyrimidinium 6‐methoxymethyl‐2‐thiouracilate–6‐methoxymethyl‐2‐thiouracil (1/1), C₄H₈N₅⁺·C₆H₇N₂O₂S⁻·C₆H₈N₂O₂S, (VII). Whereas in (I) only an AA/DD hydrogen‐bonding interaction was formed, the structures of (VI) and (VII) both display the desired ADA/DAD synthon. Conformational studies on the side chains of PTU and MOMTU also revealed a significant deviation for cocrystals (VI) and (VII), leading to the desired enhancement of the hydrogen‐bond pattern within the crystal.     

An Enzyme‐free H2O2 Sensor Based on Poly(2‐Aminophenylbenzimidazole)/Gold Nanoparticles Coated Pencil Graphite Electrode

A poly(2‐aminophenylbenzimidazole)/gold nanoparticles (P2AB/AuNPs) coated disposable pencil graphite electrode (PGE) was fabricated as an enzyme‐free sensor for the H₂O₂ determination. P2AB/AuNPs and P2AB were successfully synthesized electrochemically on PGE in acetonitrile for the first time. The coatings were characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, Energy‐dispersive X‐ray spectroscopy, Surface‐enhanced Raman spectroscopy, and UV‐Vis spectroscopy. AuNPs interacted with P2AB as carrier enhances the electrocatalytic activity towards reduction of H₂O₂. The analytical performance was evaluated in a 100 mM phosphate buffer solution at pH 6.5 by amperometry. The steady state current vs. H₂O₂ concentration is linear in the range of 0.06 to 100 mM (R²=0.992) with a limit of detection 3.67×10^?5 M at ?0.8 V vs. SCE and no interference is caused by ascorbic acid, dopamine, uric acid, and glucose. The examination for the sensitive determination of H₂O₂ was conducted in commercially available hair oxidant solution. The results demonstrate that P2AB/AuNPs/PGE has potential applications as a sensing material for quantitative determination of H₂O₂.     

Prussian Blue Nanocubes‐SnO2 Quantum Dots‐Reduced Graphene Oxide Ternary Nanocomposite: An Efficient Non‐noble‐metal Electrocatalyst for Non‐enzymatic Detection of H2O2

Developing non‐noble‐metal electrocatalyst for non‐enzymatic H₂O₂ sensing is highly attractive. A facile, two‐step approach has been utilized for the synthesis of PBNCs/SnO₂ QDs/RGO ternary nanocomposite. TEM, SEM, XPS, and XRD techniques were used to the characterize the structural and morphological properties of synthesized ternary nanocomposite. The synthesized ternary nanocomposite has been examined as an electrode material for the electrochemical detection of H₂O₂ using the Amperometry technique. Under optimum conditions, PBNCs/SnO₂ QDs/RGO ternary nanocomposite performed very well in the electrocatalytic reduction of H₂O₂ with a linear dynamic range from 25–225 μM (R²=0.996) with a low detection limit of 71 nM (S/N=3). Compared to the recent literature, PBNCs/SnO₂QDs/RGO ternary nanocomposite based modified electrode exhibit a wider linear dynamic range with a low detection limit. Furthermore, PBNCs/SnO₂ QDs/RGO ternary nanocomposite based modified electrode showed an excellent anti‐interference ability against various common interfering agents. The practical applicability of this ternary nanocomposite based modified electrode was further extended to determine the H₂O₂ in tap water with acceptable recovery. The present performance of PBNCs/SnO₂ QDs/RGO ternary nanocomposite material towards H₂O₂ sensing might widen its application for developing a new type of non‐noble metal‐based non‐enzymatic electrochemical biosensors.     

Concerning the Reaction of the Betain‐Like Compound O2CC(PPh3)2 with Tungsten‐Carbonyl Derivatives; Preparation and Crystal Structures of [(CO)5W{η1‐O2C2(PPh3)2}] and [(CO)4W{η2‐O2C2(PPh3)2}]

The carbodiphosphorane CO₂ adduct O₂CC(PPh₃)₂ ( 1a ) reacts with [(CO)₅W(THF)] and [(CO)₃W(NCEt)₃] to produce the complexes [(CO)₅W{η¹‐O₂CC(PPh₃)₂}] ( 2 ) and [(CO)₄W{η²‐O₂CC(PPh₃)₂}] ( 3 ), respectively. Whereas in 2 the betain‐like ligand is coordinated at the tungsten atom in a monodentate manner, in 3 it acts as a chelating ligand with formation of a WO₂C four‐membered ring. As a by‐product during the reaction with the acetonitrile adduct also some crystals of the hydrolysis product [HC(PPh₃)₂]₂[W₆O₁₉] · 3C₂H₄Cl₂ (4 · 3C₂H₄Cl₂) were isolated. All compounds could be characterized by X‐ray analyses and the usual spectroscopic methods.     

Regioselective ortho‐Metallation of 2‐Diphenylphosphanylpyridine and (2‐(2‐Diphenylphosphanyl)phenyl)‐1‐3‐dioxalane with Methyltetrakis(trimethylphosphane)cobalt(I)

Co(CH₃)(PMe₃)₄ forms 100 % regioselectively with (2‐(2‐diphenylphosphanyl)phenyl)‐1,3‐dioxalane and 2‐diphenylphosphanyl‐pyridine, by elimination of methane, the four‐membered metallacycles Co{(C₃O₂HC₆H₃)P(C₆H₅)₂}(PMe₃)₃ ( 1 ) and Co{(CNC₄H₃)P(C₆H₅)₂}(PMe₃)₃ ( 4 ). The regioselectivity is independent of the steric requirement of the ortho substituent in the 2‐diphenylphosphanylaryl‐ligands. Oxidative addition with iodomethane transforms 1 and 4 into octahedral, diamagnetic low‐spin d⁶ complexes Co(CH₃)I‐{(C₃O₂HC₆H₃)P(C₆H₅)₂}(PMe₃)₂ ( 2 ) and Co(CH₃)I‐{(CNC₄H₃)P(C₆H₅)₂}(PMe₃)₂ ( 5 ). Under an atmosphere of carbon monoxide, insertion into the Co‐C bond results in ring expansion by forming the new assembled phosphanylbenzoyl complexes Co{(C₄O₃HC₆H₃)‐P(C₆H₅)₂}CO(PMe₃)₂ ( 3 ) and Co{(OCNC₄H₃)P(C₆H₅)₂}CO(PMe₃)₂ ( 6 ). The three different types of cobaltacycles are supported by X‐ray diffraction of 1 , 3 , 5 and 6 .     

The Astounding Chemistry of a 2‐Amino‐1,2‐dihydroisoquinoline Derivative

The cycloadducts of isoquinolinium N‐phenyl imide 2 with C=C bonds are derivatives of 2‐amino‐1,2‐dihydroisoquinoline. Their N^β‐vinylphenylhydrazine system is amenable to an acid‐catalyzed [3,3]‐sigmatropic shift; the formation of pentacyclic aminals is exemplified by 6 → 8 . The dimethyl maleate adduct 11 , C₂₁H₂₀N₂O₄, is exceptional by being converted on treatment with acid to bright‐yellow crystals, C₂₄H₂₂N₂O₆ (additional C₃H₂O₂). X‐Ray crystal‐structure analysis and NMR spectra reveal structure 13 , and mechanistic studies indicated an initial β‐elimination at the N−N bond of 11 to yield 18 ; this step is followed by a retro‐Mannich‐type cleavage that gives methyl isoquinoline‐1‐acetate ( 14 ) and methyl 2‐(phenylimino)acetate ( 15 ), according to the sequence C₂₁H₂₀N₂O₄ ( 11 )→ 18 →C₁₂H₁₁NO₂ ( 14 )+C₉H₉NO₂ ( 15 ). In the second act of the drama, electrophilic attack by 15 ‐H⁺ on the ene‐hydrazine group of a second molecule of 11 furnishes 13 by a polystep intramolecular redox reaction. All rate constants must be fine‐tuned in this reaction cascade to give 13 in yields of up to 78% with an overall stoichiometry: 2 C₂₁H₂₀N₂O₄ ( 11 )→C₂₄H₂₂N₂O₆ ( 13 )+C₁₂H₁₁NO₂ ( 14 )+aniline. Interception and model experiments confirmed the above pathway. A by‐product, C₃₃H₃₁N₃O₆ ( 62 ), arises from an acid‐catalyzed dimerization of 11 and subsequent elimination of 15 .     

1‐Amino‐2‐fluoromonocarba‐closo‐dodecaborates: K[1‐H2N‐2‐F‐closo‐1‐CB11H10] and [Et4N][1‐H2N‐2‐F‐closo‐1‐CB11I10]

The potassium salt of the [1‐H₂N‐2‐F‐closo‐1‐CB₁₁H₁₀]^– anion ( 1 ) was obtained from an insertion reaction of Li₃[7‐H₂N‐nido‐7‐CB₁₀H₁₀] with BF₃ · OEt₂. Anion 1 was protonated to the neutral species 1‐H₃N‐2‐F‐closo‐1‐CB₁₁H₁₀ (H 1 ) and it was iodinated with ICl to the [1‐H₂N‐2‐F‐closo‐1‐CB₁₁I₁₀]^– anion ( 2 ). All species were characterized by multinuclear NMR, IR, and Raman spectroscopy as well as by elemental analysis. The structure of H 1· (CH₃)₂CO was studied by single‐crystal X‐ray diffraction and the experimentally determined bond lengths are compared to values derived from density functional calculations.     

A Dual‐Response Fluorescent Probe Reveals the H2O2‐Induced H2S Biogenesis through a Cystathionine β‐Synthase Pathway

The two signaling molecules H₂S and H₂O₂ play key roles in maintaining intracellular redox homeostasis. The biological relationship between H₂O₂ and H₂S remains largely unknown in redox biology. In this study, we rationally designed and synthesized single‐ and dual‐response fluorescent probes for detecting both H₂O₂ and H₂S in living cells. The dual‐response probe was shown to be capable of mono‐ and dual‐detection of H₂O₂ and H₂S selectively and sensitively. Detailed bioimaging studies based on the probes revealed that both exogenous and endogenous H₂O₂ could induce H₂S biogenesis in living cells. By using gene‐knockdown techniques with bioimaging, the H₂S biogenesis was found to be majorly cystathionine β‐synthase (CBS)‐dependent. Our finding shows the first direct evidence on the biological communication between H₂O₂ (ROS) and H₂S (RSS) in vivo.     

Ternary Sn‐Ti‐O Electrocatalyst Boosts the Stability and Energy Efficiency of CO2 Reduction

Simultaneously improving energy efficiency (EE) and material stability in electrochemical CO₂ conversion remains an unsolved challenge. Among a series of ternary Sn‐Ti‐O electrocatalysts, 3D ordered mesoporous (3DOM) Sn_0.3Ti_0.7O₂ achieves a trade‐off between active‐site exposure and structural stability, demonstrating up to 71.5 % half‐cell EE over 200 hours, and a 94.5 % Faradaic efficiency for CO at an overpotential as low as 430 mV. DFT and X‐ray absorption fine structure analyses reveal an electron density reconfiguration in the Sn‐Ti‐O system. A downshift of the orbital band center of Sn and a charge depletion of Ti collectively facilitate the dissociative adsorption of the desired intermediate COOH* for CO formation. It is also beneficial in maintaining a local alkaline environment to suppress H₂ and formate formation, and in stabilizing oxygen atoms to prolong durability. These findings provide a new strategy in materials design for efficient CO₂ conversion and beyond.     

Enhanced peroxidase‐like activity of MMT‐supported cuprous oxide nanocomposites toward rapid colorimetric estimation of H2O2

Nanocomposites based on Cu₂O and Ca‐montmorillonite (Ca⁺‐MMT) with different composition were successfully prepared via a simple hydrothermal method. The as‐prepared Cu₂O‐MMT nanocomposites can rapidly catalytically oxidize the colorless chromogenic substrate, 3,3′,5,5′‐tetramethylbenzydine (TMB) into blue oxTMB with the aid of the H₂O₂ only in 30 s, which were observed by the naked eye. The reaction catalyzed by the Cu₂O‐MMT nanocomposites followed the Michaelis–Menten kinetics. Compared to the MMT or Cu₂O alone, Cu₂O‐MMT with different mass ratio exhibited an enhanced peroxidase‐like activity. The fabricated H₂O₂ sensor exhibited a good response to H₂O₂ with a linear detection range from 3 to 80 μM as well as a detection limit of 2.395 μM. Taking the advantages of the Cu₂O‐MMT nanocomposites, including outstanding peroxidase‐like activity and high sensitivity for colorimetric detection of H₂O₂, a colorimetric sensor based on the Cu₂O‐MMT nanocomposites was designed and used to rapidly detect H₂O₂ in a short time.     

Carbonyl–carbonyl and carbonyl–π interactions as directing motifs in the supramolecular structure of carbonyl(3‐oxopenta‐1,4‐diene‐1,5‐diyl)[tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN2)methane]iridium(III) trifluoromethanesulfonate

In the title complex salt, [Ir(C₅H₄O)(C₁₆H₂₂N₆)(CO)](CF₃O₃S), the Ir^III centre adopts a distorted octahedral geometry with a facial coordination of the tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane ligand. The C—C distances of the iridacycle are in agreement with its iridacyclohexa‐2,5‐dien‐4‐one nature, which presents a nonsymmetric boat‐like conformation with the C—Ir—C vertex more bent than the C—C(=O)—C vertex. The supramolecular architecture is mainly directed by CO...CO and CO...π and Csp³—H...O interactions, the arrangement of which depends on the anion.     

Free Superoxide is an Intermediate in the Production of H2O2 by Copper(I)‐Aβ Peptide and O2

Oxidative stress is considered as an important factor and an early event in the etiology of Alzheimer's disease (AD). Cu bound to the peptide amyloid‐β (Aβ) is found in AD brains, and Cu‐Aβ could contribute to this oxidative stress, as it is able to produce in vitro H₂O₂ and HO^. in the presence of oxygen and biological reducing agents such as ascorbate. The mechanism of Cu‐Aβ‐catalyzed H₂O₂ production is however not known, although it was proposed that H₂O₂ is directly formed from O₂ via a 2‐electron process. Here, we implement an electrochemical setup and use the specificity of superoxide dismutase‐1 (SOD1) to show, for the first time, that H₂O₂ production by Cu‐Aβ in the presence of ascorbate occurs mainly via a free O₂^.? intermediate. This finding radically changes the view on the catalytic mechanism of H₂O₂ production by Cu‐Aβ, and opens the possibility that Cu‐Aβ‐catalyzed O₂^.? contributes to oxidative stress in AD, and hence may be of interest.     

Di‐μ2‐sulfito‐κ8O,O′:O′,O′′‐bis[(2,4,6‐tri‐2‐pyrid­yl‐1,3,5‐triazine‐κ3N2,N1,N6)cadmium(II)] octa­hydrate

The title compound, [Cd₂(SO₃)₂(C₁₈H₁₂N₆)₂]·8H₂O, is a dimer built up around a symmetry center, where the sulfite anion displays a so far unreported coordination mode in metal‐organic complexes; the anion binds as a μ₂‐sulfite‐κ⁴O,O′:O′,O′′ ligand to two symmetry‐related seven‐coordinate Cd^II cations, binding through its three O atoms by way of two chelate bites with an O atom in common, which acts as a bridge. The cation coordination is completed by a 2,4,6‐tri‐2‐pyridyl‐1,3,5‐triazine ligand acting in its usual tridentate mode.