Metal‐Ion Metathesis in Metal–Organic Frameworks: A Synthetic Route to New Metal–Organic Frameworks

A porous metal–organic framework, Mn(H₃O)[(Mn₄Cl)₃(hmtt)₈] (POST‐65), was prepared by the reaction of 5,5′,10,10′,15,15′‐hexamethyltruxene‐2,7,12‐tricarboxylic acid (H₃hmtt) with MnCl₂ under solvothermal conditions. POST‐65(Mn) was subjected to post‐synthetic modification with Fe, Co, Ni, and Cu according to an ion‐exchange method that resulted in the formation of three isomorphous frameworks, POST‐65(Co/Ni/Cu), as well as a new framework, POST‐65(Fe). The ion‐exchanged samples could not be prepared by regular solvothermal reactions. The complete exchange of the metal ions and retention of the framework structure were verified by inductively coupled plasma–atomic emission spectrometry (ICP‐AES), powder X‐ray diffraction (PXRD), and Brunauer–Emmett–Teller (BET) surface‐area analysis. Single‐crystal X‐ray diffractions studies revealed a single‐crystal‐to‐single‐crystal (SCSC)‐transformation nature of the ion‐exchange process. Hydrogen‐sorption and magnetization measurements showed metal‐specific properties of POST‐65.     

Metal–Organic Frameworks Containing Missing‐Linker Defects Leading to High Hydroxide‐Ion Conductivity

The ionic conductivity properties of the face‐centered cubic [Ni₈(OH)₄(H₂O)₂(BDP_X)₆] (H₂BDP_X=1,4‐bis(pyrazol‐4‐yl)benzene‐4‐X with X=H ( 1 ), OH ( 2 ), NH₂ ( 3 )) metal–organic framework (MOF) systems as well as their post‐synthetically modified materials K[Ni₈(OH)₅(EtO)(BDP_X)_5.5] ( 1@KOH , 3@KOH ) and K₃[Ni₈(OH)₃(EtO)(BDP_O)₅] ( 2@KOH ), which contain missing‐linker defects, have been studied by variable temperature AC impedance spectroscopy. It should be noted that these modified materials exhibit up to four orders of magnitude increase in conductivity ^‐values in comparison to pristine 1 – 3 systems. As an example, the conductivity value of 5.86×10^?9 S cm^?1 (activation energy E_a of 0.60 eV) for 2 at 313 K and 22 % relative humidity (RH) increases up to 2.75×10^?5 S cm^?1 (E_a of 0.40 eV) for 2@KOH . Moreover, a further increase of conductivity values up to 1.16×10^?2 S cm^?1 and diminution of E_a down to 0.20 eV is achieved at 100 % RH for 2@KOH . The increased porosity, basicity and hydrophilicity of the 1@KOH – 3@KOH materials compared to the pristine 1 – 3 systems should explain the better performance of the KOH‐modified materials.     

Solvent‐Dependent Cation Exchange in Metal–Organic Frameworks

We investigated which factors govern the critical steps of cation exchange in metal–organic frameworks by studying the effect of various solvents on the insertion of Ni²⁺ into MOF‐5 and Co²⁺ into MFU‐4l. After plotting the extent of cation insertion versus different solvent parameters, trends emerge that offer insight into the exchange processes for both systems. This approach establishes a method for understanding critical aspects of cation exchange in different MOFs and other materials.     

Cooperative Cluster Metalation and Ligand Migration in Zirconium Metal–Organic Frameworks

Cooperative cluster metalation and ligand migration were performed on a Zr‐MOF, leading to the isolation of unique bimetallic MOFs based on decanuclear Zr₆M₄ (M=Ni, Co) clusters. The M²⁺ reacts with the μ₃‐OH and terminal H₂O ligands on an 8‐connected [Zr₆O₄(OH)₈(H₂O)₄] cluster to form a bimetallic [Zr₆M₄O₈(OH)₈(H₂O)₈] cluster. Along with the metalation of Zr₆ cluster, ligand migration is observed in which a Zr–carboxylate bond dissociates to form a M–carboxylate bond. Single‐crystal to single‐crystal transformation is realized so that snapshots for cooperative cluster metalation and ligand migration processes are captured by successive single‐crystal X‐ray structures. In³⁺ was metalated into the same Zr‐MOF which showed excellent catalytic activity in the acetaldehyde cyclotrimerization reaction. This work not only provides a powerful tool to functionalize Zr‐MOFs with other metals, but also structurally elucidates the formation mechanism of the resulting heterometallic MOFs.     

Post‐Synthetic Modification of Zr‐Metal–Organic Frameworks through Cycloaddition Reactions

Cycloaddition reactions are highly attractive for post‐synthetic modification of metal–organic frameworks (MOFs). We report herein on cycloaddition reactions with PIZOF(R¹,R²)s, which are porous interpenetrated Zr‐based MOFs with Zr₆O₄(OH)₄(CO₂)₁₂ as the nodes and the dicarboxylates ^?O₂C[PE‐P(R¹,R²)‐EP]CO₂^? (P: phenylene, E: ethynylene; R¹, R²: side chains at the central phenylene unit) as the linkers. 1,3‐Dipolar cycloaddition between the pendant ethyne moieties of PIZOF(OMe,OCH₂C?CH) and 4‐methylbenzyl azide resulted in 98 % conversion of the ethyne groups. Reactions of PIZOF(OMe,O(CH₂)₃furan) with maleimide, N‐methylmaleimide, and N‐phenylmaleimide converted 98, 99, and 89 % of the furan moieties into the Diels–Alder adducts. However, no reaction occurred with maleic anhydride. High‐resolution ¹H NMR spectra were crucial in determining the conversion and identifying the reaction products. Of all the reagents (NaOD/D₂O, D₂SO₄, Bu₄NF, CsF, CsF/DCl, and KHF₂) tested for the disassembly of the PIZOFs in [D₆]DMSO, the combination of CsF and DCl was found to be the best. The disassembly at room temperature was fast (5–15 min), and after the addition of K₂CO₃ the ¹H NMR data were identical to those of the diacids (=protonated linkers) dissolved in pure DMSO. This allowed for simple structure elucidation through data comparison. CsF/DCl dissolves not only PIZOFs but also the hydrolytically very stable UiO‐66.     

Defect‐Engineered Metal–Organic Frameworks

Defect engineering in metal–organic frameworks (MOFs) is an exciting concept for tailoring material properties, which opens up novel opportunities not only in sorption and catalysis, but also in controlling more challenging physical characteristics such as band gap as well as magnetic and electrical/conductive properties. It is challenging to structurally characterize the inherent or intentionally created defects of various types, and there have so far been few efforts to comprehensively discuss these issues. Based on selected reports spanning the last decades, this Review closes that gap by providing both a concise overview of defects in MOFs, or more broadly coordination network compounds (CNCs), including their classification and characterization, together with the (potential) applications of defective CNCs/MOFs. Moreover, we will highlight important aspects of “defect‐engineering” concepts applied for CNCs, also in comparison with relevant solid materials such as zeolites or COFs. Finally, we discuss the future potential of defect‐engineered CNCs.     

Design of Single‐Site Photocatalysts by Using Metal–Organic Frameworks as a Matrix

Single‐site photocatalysts generally display excellent photocatalytic activity and considerably high stability compared with homogeneous catalytic systems. A rational structural design of single‐site photocatalysts with isolated, uniform, and spatially separated active sites in a given solid is of prime importance to achieve high photocatalytic activity. Intense attention has been focused on the design and fabrication of single‐site photocatalysts by using porous materials as a platform. Metal–organic frameworks (MOFs) have great potential in the design and fabrication of single‐site photocatalysts due to their remarkable porosity, ultrahigh surface area, extraordinary tailorability, and significant diversity. MOFs can provide an abundant number of binding sites to anchor active sites, which results in a significant enhancement in photocatalytic performance. In this focus review, the development of single‐site MOF photocatalysts that perform important and challenging chemical redox reactions, such as photocatalytic H₂ production, photocatalytic CO₂ conversion, and organic transformations, is summarized thoroughly. Successful strategies for the construction of single‐site MOF photocatalysts are summarized and major challenges in their practical applications are noted.     

2D Oligosilyl Metal–Organic Frameworks as Multi‐state Switchable Materials

We report the synthesis of a set of 2D metal–organic frameworks (MOFs) constructed with organosilicon‐based linkers. These oligosilyl MOFs feature linear Si_nMe_2n(C₆H₄CO₂H)₂ ligands (lin‐Si_n, n=2, 4) connected by Cu paddlewheels. The stacking arrangement of the 2D sheets is dictated by van der Waals interactions and is tunable by solvent exchange, leading to reversible structural transformations between many crystalline and amorphous phases.     

Direct and Post‐Synthesis Incorporation of Chiral Metallosalen Catalysts into Metal–Organic Frameworks for Asymmetric Organic Transformations

Two chiral porous metal–organic frameworks (MOFs) were constructed from [VO(salen)]‐derived dicarboxylate and dipyridine bridging ligands. After oxidation of V^IV to V^V, they were found to be highly effective, recyclable, and reusable heterogeneous catalysts for the asymmetric cyanosilylation of aldehydes with up to 95 % ee. Solvent‐assisted linker exchange (SALE) treatment of the pillared‐layer MOF with [Cr(salen)Cl]‐ or [Al(salen)Cl]‐derived dipyridine ligands led to the formation of mixed‐linker metallosalen‐based frameworks and incorporation of [Cr(salen)] enabled its use as a heterogeneous catalyst in the asymmetric epoxide ring‐opening reaction.     

Metal–Covalent Organic Frameworks (MCOFs): A Bridge Between Metal–Organic Frameworks and Covalent Organic Frameworks

Many sophisticated chemical and physical properties of porous materials strongly rely on the presence of the metal ions within the structures. Whereas homogeneous distribution of metals is conveniently realized in metal–organic frameworks (MOFs), the limited stability potentially restricts their practical implementation. From that perspective, the development of metal–covalent organic frameworks (MCOFs) may address these shortcomings by incorporating active metal species atop highly stable COF backbones. This Minireview highlights examples of MCOFs that tackle important issues from their design, synthesis, characterization to cutting‐edge applications.     

Electroactive Metal–Organic Frameworks as Emitters for Self‐Enhanced Electrochemiluminescence in Aqueous Medium

Metal–organic frameworks (MOFs) have limited applications in electrochemistry owing to their poor conductivity. Now, an electroactive MOF (E‐MOF) is designed as a highly crystallized electrochemiluminescence (ECL) emitter in aqueous medium. The E‐MOF contains mixed ligands of hydroquinone and phenanthroline as oxidative and reductive couples, respectively. E‐MOFs demonstrate excellent performance with surface state model in both co‐reactant and annihilation ECL in aqueous medium. Compared with the individual components, E‐MOFs significantly improve the ECL emission due to the framework structure. The self‐enhanced ECL emission with high stability is realized by the accumulation of MOF cation radicals via pre‐reduction electrolysis. The self‐enhanced mechanism is theoretically identified by DFT. The mixed‐ligand E‐MOFs provide a proof of concept using molecular crystalline materials as new ECL emitters for fundamental mechanism studies.     

Stimulus‐Responsive Metal–Organic Frameworks

Materials that can recognize the changes in their local environment and respond by altering their inherent physical and/or chemical properties are strong candidates for future “smart” technology materials. Metal–organic frameworks (MOFs) have attracted a great deal of attention in recent years owing to their designable architecture, host–guest chemistry, and softness as porous materials. Despite this fact, studies on the tuning of the properties of MOFs by external stimuli are still rare. This review highlights the recent developments in the field of stimulus‐responsive MOFs or so‐called smart MOFs. In particular, the various stimuli used and the utility of stimulus‐responsive smart MOFs for various applications such as gas storage and separation, sensing, clean energy, catalysis, molecular motors, and biomedical applications are highlighted by using representative examples. Future directions in the developments of stimulus‐responsive smart MOFs and their applications are proposed from a personal perspective.     

Molecular Level Characterization of the Structure and Interactions in Peptide‐Functionalized Metal–Organic Frameworks

We use density functional theory, newly parameterized molecular dynamics simulations, and last generation ¹⁵N dynamic nuclear polarization surface enhanced solid‐state NMR spectroscopy (DNP SENS) to understand graft–host interactions and effects imposed by the metal–organic framework (MOF) host on peptide conformations in a peptide‐functionalized MOF. Focusing on two grafts typified by MIL‐68‐proline ( ‐Pro ) and MIL‐68‐glycine‐proline ( ‐Gly‐Pro ), we identified the most likely peptide conformations adopted in the functionalized hybrid frameworks. We found that hydrogen bond interactions between the graft and the surface hydroxyl groups of the MOF are essential in determining the peptides conformation(s). DNP SENS methodology shows unprecedented signal enhancements when applied to these peptide‐functionalized MOFs. The calculated chemical shifts of selected MIL‐68‐NH‐ Pro and MIL‐68‐NH‐ Gly‐Pro conformations are in a good agreement with the experimentally obtained ¹⁵N NMR signals. The study shows that the conformations of peptides when grafted in a MOF host are unlikely to be freely distributed, and conformational selection is directed by strong host–guest interactions.     

Crystalline Capsules: Metal–Organic Frameworks Locked by Size‐Matching Ligand Bolts

Metal–organic frameworks (MOFs) are shown to be good examples of a new class of crystalline porous materials for guest encapsulation. Since the encapsulation/release of guest molecules in MOF hosts is a reversible process in nature, how to prevent the leaching of guests from the open pores with minimal and nondestructive modifications of the structure is a critical issue. To address this issue, we herein propose a novel strategy of encapsulating guests by introducing size‐matching organic ligands as bolts to lock the pores of the MOFs through deliberately anchoring onto the open metal sites in the pores. Our proposed strategy provides a mechanical way to prevent the leaching of guests and thereby has less dependence on the specific chemical environment of the hosts, thus making it applicable for a wide variety of existing MOFs once the size‐matching ligands are employed.     

A New Dimension for Coordination Polymers and Metal–Organic Frameworks: Towards Functional Glasses and Liquids

There are two categories of coordination polymers (CPs): inorganic CPs (i‐CPs) and organic ligand bridged CPs (o‐CPs). Based on the successful crystal engineering of CPs, we here propose noncrystalline states and functionalities as a new research direction for CPs. Control over the liquid or glassy states in materials is essential to obtain specific properties and functions. Several studies suggest the feasibility of obtaining liquid/glassy states in o‐CPs by design principles. The combination of metal ions and organic bridging ligands, together with the liquid/glass phase transformation, offer the possibility to transform o‐CPs into ionic liquids and other ionic soft materials. Synchrotron measurements and computational approaches contribute to elucidating the structures and dynamics of the liquid/glassy states of o‐CPs. This offers the opportunity to tune the porosity, conductivity, transparency, and other material properties. The unique energy landscape of liquid/glass o‐CPs offers opportunities for properties and functions that are complementary to those of the crystalline state.     

Rabies Virus‐Inspired Metal–Organic Frameworks (MOFs) for Targeted Imaging and Chemotherapy of Glioma

The blood–brain barrier (BBB) restricts access to the brain of more than 98 % of therapeutic agents and is largely responsible for treatment failure of glioblastoma multiforme (GBM). Therefore, it is of great importance to develop a safe and efficient strategy for more effective drug delivery across the BBB into the brain. Inspired by the extraordinary capability of rabies virus (RABV) to enter the central nervous system, we report the development and evaluation of the metal–organic framework‐based nanocarrier MILB@LR, which closely mimicked both the bullet‐shape structure and surface functions of natural RABV. MILB@LR benefited from a more comprehensive RABV‐mimic strategy than mimicking individual features of RABV and exhibited significantly enhanced BBB penetration and brain tumor targeting. MILB@LR also displayed superior inhibition of tumor growth when loaded with oxaliplatin. The results demonstrated that MILB@LR may be valuable for GBM targeting and treatment.     

Chemical and Structural Stability of Zirconium‐based Metal–Organic Frameworks with Large Three‐Dimensional Pores by Linker Engineering

The synthesis of metal–organic frameworks with large three‐dimensional channels that are permanently porous and chemically stable offers new opportunities in areas such as catalysis and separation. Two linkers (L1=4,4′,4′′,4′′′‐([1,1′‐biphenyl]‐3,3′,5,5′‐tetrayltetrakis(ethyne‐2,1‐diyl)) tetrabenzoic acid, L2=4,4′,4′′,4′′′‐(pyrene‐1,3,6,8‐tetrayltetrakis(ethyne‐2,1‐diyl))tetrabenzoic acid) were used that have equivalent connectivity and dimensions but quite distinct torsional flexibility. With these, a solid solution material, [Zr₆O₄(OH)₄(L1)_2.6(L2)_0.4]?(solvent)_x, was formed that has three‐dimensional crystalline permanent porosity with a surface area of over 4000 m² g^?1 that persists after immersion in water. These properties are not accessible for the isostructural phases made from the separate single linkers.     

Multi‐shelled Hollow Metal–Organic Frameworks

Hollow metal–organic frameworks (MOFs) are promising materials with sophisticated structures, such as multiple shells, that cannot only enhance the properties of MOFs but also endow them with new functions. Herein, we show a rational strategy to fabricate multi‐shelled hollow chromium (III) terephthalate MOFs (MIL‐101) with single‐crystalline shells through step‐by‐step crystal growth and subsequent etching processes. This strategy relies on the creation of inhomogeneous MOF crystals in which the outer layer is chemically more robust than the inner layer and can be selectively etched by acetic acid. The regulation of MOF nucleation and crystallization allows the tailoring of the cavity size and shell thickness of each layer. The resultant multi‐shelled hollow MIL‐101 crystals show significantly enhanced catalytic activity during styrene oxidation. The insight gained from this systematic study will aid in the rational design and synthesis of other multi‐shelled hollow structures and the further expansion of their applications.